AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4P-8264 CYLINDER HEAD GP 3116 ENGINE - MACHINE


BASIC ENGINE
CYLINDER HEAD GP
DAMPER GP

ENGINE - MACHINE 3116 ENGINE - MACHINE 2WG
 3116 Industrial Engine 2WG00001-UP SEBP1797 3116 2WG   (2018)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD GP
4P-8263 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-8263 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-8264 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-0737 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-0737 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-1099 CYLINDER HEAD GP
 

#SEBP17970110
 

4P-8264: CYLINDER HEAD GP

4P-8264 CYLINDER HEAD GP
i00122104 SEBP1797
4P8264 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-9671 [3] SEAL-O-RING  
2. 4P-8263 Y [1] CYLINDER HEAD GP  
3. 8T-3282 [14] WASHER-HARD (22X35X3.5-MM THK)  
  127-4836 M [14] BOLT (M20X2.5X160-MM)  
4. 9S-8003 [3] PLUG (1/2-20-THD)  
5. 2M-6471 [2] PLUG-CUP  
6. 107-7832 [1] GASKET (1.60MM THK)  
  4P-2590 AB [1] GASKET-CYLINDER HEAD (1.85MM THK)  
7. 8T-5030 M [6] BOLT (M10X1.5X120-MM)  
8. 9S-8002 [1] PLUG (7/16-20-THD)  
9. 3J-7354 [1] SEAL-O-RING  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17970111
 

4W-0737: CYLINDER HEAD GP

4W-0737 CYLINDER HEAD GP
S/N 2WG1-545
FOR FIELD REPLACEMENT OF 7W3278 CYLINDER HEAD AS ORDER 9Y6166
PART OF 4W-1099 CYLINDER HEAD GP
i00378385 SEBP1797
4W0737 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3278 [1] CYLINDER HEAD AS  
2. 1W-2713 [6] INSERT-VALVE SEAT (EXHAUST)  
3. 7W-8065 [6] INSERT-VALVE SEAT (INLET)  
4. 7W-5749 [6] SLEEVE  
5. 8M-5860 [6] PLUG-CUP  
6. 7W-8064 [6] VALVE-INLET  
7. 7W-2699 [6] VALVE-EXHAUST  
8. 1W-2715 [24] LOCK-RETAINER  
9. 7W-5202 [12] RETAINER-VALVE SPRING  
10. 7C-4273 [12] SPRING-VALVE  
11. 7C-7448 C [6] SEAL-VALVE STEM  
12. 2W-5358 C [12] GUIDE-VALVE  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17970112
 

4W-0737: CYLINDER HEAD GP

4W-0737 CYLINDER HEAD GP
S/N 2WG546-765
FOR FIELD REPLACEMENT OF 7W3278 CYLINDER HEAD AS ORDER 9Y6166
PART OF 4W-1099 CYLINDER HEAD GP
i00378389 SEBP1797
4W0737 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3278 [1] CYLINDER HEAD AS  
2. 1W-2713 [6] INSERT-VALVE SEAT (EXHAUST)  
3. 7W-8065 [6] INSERT-VALVE SEAT (INLET)  
4. 7W-5749 [6] SLEEVE  
5. 8M-5860 [6] PLUG-CUP  
6. 7W-8064 [6] VALVE-INLET  
7. 7W-2699 [6] VALVE-EXHAUST  
8. 1W-2715 [24] LOCK-RETAINER  
9. 7E-7779 C [12] RETAINER-SPRING  
10. 7C-4273 [12] SPRING-VALVE  
11. 7C-7448 [6] SEAL-VALVE STEM  
12. 9Y-8848 C [12] GUIDE-VALVE  
13. 9Y-7355 C [12] SEAT-VALVE SPRING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17970113
 

4W-1099: CYLINDER HEAD GP

4W-1099 CYLINDER HEAD GP
S/N 2WG1-765
i00378531 SEBP1797
4W1099 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-9671 [3] SEAL-O-RING  
2. 4W-0737 Y [1] CYLINDER HEAD GP  
3. 8T-0657 M [14] BOLT (M20X2.5X160-MM)  
4. 8T-3282 [14] WASHER-HARD (22X35X3.5-MM THK)  
5. 2M-6471 [2] PLUG-CUP  
6. 7W-9956 [1] GASKET-CYLINDER HEAD (1.60MM THK)  
  4P-2590 AB [1] GASKET-CYLINDER HEAD (1.85MM THK)  
7. 8T-5030 M [6] BOLT (M10X1.5X120-MM)  
8. 9S-8003 [3] PLUG (1/2-20-THD)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17970114
 

6I-2121: CYLINDER HEAD GP

6I-2121 CYLINDER HEAD GP
S/N 2WG1403-UP
AIR COMPRESSOR
PART OF 9Y-9943 AIR COMPRESSOR GP
ALSO AN ATTACHMENT
i00393466 SEBP1797
6I2121 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-4987 [2] SPRING-VALVE  
2. 3H-5181 [2] VALVE  
3. 9M-0394 [2] SEAT-VALVE  
 

#SEBP17970115
 

9Y-8850: CYLINDER HEAD GP

9Y-8850 CYLINDER HEAD GP
NON-SWIRL
PART OF 9Y-8871 CYLINDER HEAD GP
i00157962 SEBP1797
9Y8850 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3278 [1] CYLINDER HEAD AS  
2. 1W-2713 [6] INSERT-VALVE SEAT (EXHAUST)  
3. 7W-8065 [6] INSERT-VALVE SEAT (INLET)  
4. 7W-5749 [6] SLEEVE  
5. 8M-5860 [6] PLUG-CUP  
6. 7W-8064 [6] VALVE-INLET  
7. 105-1779 [6] VALVE-EXHAUST  
8. 1W-2715 [24] LOCK-RETAINER  
9. 7E-7779 [12] RETAINER-SPRING  
10. 7C-4273 [12] SPRING-VALVE  
11. 4P-7750 [12] SEAL-VALVE STEM  
12. 9Y-8848 [12] GUIDE-VALVE  
 

#SEBP17970116
 

9Y-8871: CYLINDER HEAD GP

9Y-8871 CYLINDER HEAD GP
NON-SWIRL
i00157963 SEBP1797
9Y8871 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-9671 [3] SEAL-O-RING  
2. 9Y-8850 Y [1] CYLINDER HEAD GP  
3. 8T-0657 M [14] BOLT (M20X2.5X160-MM)  
4. 8T-3282 [14] WASHER-HARD (22X35X3.5-MM THK)  
5. 2M-6471 [2] PLUG-CUP  
6. 4P-6930 [1] GASKET-CYLINDER HEAD (1.60-MM THK)  
  4P-2590 AB [1] GASKET-CYLINDER HEAD (1.85-MM THK)  
7. 8T-5030 M [6] BOLT (M10X1.5X120-MM)  
8. 9S-8003 [3] PLUG (1/2-20-THD)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17970117
 

9Y-8871: CYLINDER HEAD GP

9Y-8871 CYLINDER HEAD GP
S/N 2WG1335-UP
NON-SWIRL
i00157964 SEBP1797
9Y8871 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-9671 [3] SEAL-O-RING  
2. 115-4165 Y [1] CYLINDER HEAD GP  
3. 8T-3282 [14] WASHER-HARD (22X35X3.5-MM THK)  
  127-4836 M [14] BOLT (M20X2.5X160-MM)  
4. 9S-8003 [3] PLUG (1/2-20-THD)  
5. 2M-6471 [2] PLUG-CUP  
6. 107-7832 [1] GASKET (1.61-MM THK)  
  4P-2590 AB [1] GASKET-CYLINDER HEAD (1.85-MM THK)  
7. 8T-5030 M [6] BOLT (M10X1.5X120-MM)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17970118
 

4P-5812: DAMPER & PULLEY GP

4P-5812 DAMPER & PULLEY GP
AN ATTACHMENT
i00157880 SEBP1797
4P5812 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-8121 [1] DAMPER AS  
2. 107-7750 [1] PULLEY  
3. 6V-5230 M [8] BOLT (M10X1.5X60-MM)  
4. 6V-5839 [8] WASHER (11X21X2.5-MM THK)  
  M   METRIC PART
 

#SEBP17970119
 

7C-2428: DAMPER & PULLEY GP

7C-2428 DAMPER & PULLEY GP
190 MM DIAMETER 3 GROOVES AND 250 MM DAMPER DIAMETER
i00167679 SEBP1797
7C2428 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 203-6088 [1] DAMPER AS  
2. 107-7750 [1] PULLEY  
3. 6V-5230 M [8] BOLT (M10X1.5X60-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem "Use Again" Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
New Valve Stem Seal Used On Inlet Valves And Added To Exhaust Valves
1989/05/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Modification Of 1U7791 Valve Seat Driver
1990/11/01
New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups
1990/11/01
Thicker Head Gaskets Available For Use With Resurfaced Cylinder Blocks
1992/10/01
New 9U6101 Lower Pilot Reamer Group Available
1993/02/01
Fuel Injector Sleeve Replacement Tooling{0703,1125}
1996/02/16
Lubricant Used On Cylinder Head Bolts Changed{1100}
1996/02/16
New Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/16
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Correct Procedures for Installing, Reaming and Coining Copper Sleeves {1100, 1101, 1713}
2008/04/07
Operation and Maintenance Manual
Engine Valve Lash - Inspect/Adjust
3114, 3116, and 3126 Industrial and Generator Set Engines
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Usage of Cylinder Head Gaskets{1124}
Usage of Cylinder Head Gaskets{1124}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
Injector Sleeve Inspection On Certain 3116 And 3126 Industrial Marine Engines
Injector Sleeve Inspection On Certain 3116 And 3126 Industrial Marine Engines
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Correct Machining Of The 130-9004 Intake Valve Seat Insert
Correct Machining Of The 130-9004 Intake Valve Seat Insert
Specifications
Cylinder Head Valves
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Cylinder Head
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Disassembly and Assembly
Camshaft Bearings - Remove and Install
3114, 3116 and 3126 Engines
Cylinder Head - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Cylinder Head - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
3114, 3116 and 3126 Engines
Unit Injector Sleeve - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Unit Injector Sleeve - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
3114, 3116 and 3126 Engines
Inlet and Exhaust Valve Guides - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Valve Stem Seal Used On Inlet Valves And Added To Exhaust Valves {1105,1108}
1989/05/15
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Modification Of 1U7791 Valve Seat Driver{0782,1103}
1990/10/29
New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups{1208}
1990/11/05
Thicker Head Gaskets Available For Use With Resurfaced Cylinder Blocks{1124}
1992/10/05
New 9U6101 Lower Pilot Reamer Group Available{0670,1125}
1993/02/01
New Valve Cover Gasket Used {1107}
1994/01/17
128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}
1997/01/27
Cylinder Head Stress Plate Used During Cylinder Bore Honing And Measurement {1223}
1997/01/27
Thicker Head Gasket Available For Cylinder Block Salvage Procedure {1124}
1997/12/22
Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Correct Procedures for Installing, Reaming and Coining Copper Sleeves {1100, 1101, 1713}
2008/04/07

Caterpillar Parts SIS Catalog 3116 :

CYLINDER HEAD GP
4P-8263 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-8263 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-8263 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-2141 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-2140 CYLINDER HEAD GP
CYLINDER HEAD GP
160-5136 CYLINDER HEAD GP
CYLINDER HEAD GP
160-5130 CYLINDER HEAD GP
CYLINDER HEAD GP
159-0305 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-0737 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-0737 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-1099 CYLINDER HEAD GP
CYLINDER HEAD GP
6I-2121 CYLINDER HEAD GP
CYLINDER HEAD GP
9Y-8850 CYLINDER HEAD GP
CYLINDER HEAD GP
9Y-8871 CYLINDER HEAD GP
CYLINDER HEAD GP
9Y-8871 CYLINDER HEAD GP
DAMPER & PULLEY GP
4P-5812 DAMPER & PULLEY GP

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QUÉBEC, Quebec, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.