AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

157-4386 TURBOCHARGER GP S/N 2WG6416-UP PART OF 7C-6342 TURBOCHARGER GP 3116 ENGINE - MACHINE


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP

ENGINE - MACHINE 3116 ENGINE - MACHINE 2WG
 3116 Industrial Engine 2WG00001-UP SEBP1797 3116 2WG   (2018)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
TURBOCHARGER GP
130-5921 TURBOCHARGER GP
TURBOCHARGER GP
143-1209 TURBOCHARGER GP
TURBOCHARGER GP
157-4386 TURBOCHARGER GP
TURBOCHARGER GP
4P-2120 TURBOCHARGER GP
TURBOCHARGER GP
4P-2120 TURBOCHARGER GP
TURBOCHARGER GP
4P-4682 TURBOCHARGER GP
 

#SEBP17970520
 

157-4386: TURBOCHARGER GP

157-4386 TURBOCHARGER GP
S/N 2WG6416-UP
PART OF 7C-6342 TURBOCHARGER GP
i00907334 SEBP1797
1574386 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 120-2243 [3] PLATE-CLAMP (TURBINE)  
2. 120-2244 M [6] BOLT (M8X1.25X14-MM)  
3. 121-9799 [3] PLATE-CLAMP (COMPRESSOR)  
4. 125-5466 [6] BOLT AS  
5. 135-2648 [1] HOUSING AS-TURBINE  
  4K-0149 [7] PLUG-CUP  
6. 158-4645 Y [1] CARTRIDGE GP-TURBOCHARGER  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP17970521
 

4P-2120: TURBOCHARGER GP

4P-2120 TURBOCHARGER GP
S/N 2WG2608-3605
i00374429 SEBP1797
4P2120 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-6746 Y [1] TURBOCHARGER GP  
2. 9X-6620 M [4] LOCKNUT (M10X1.5-THD)  
3. 7C-9793 [1] GASKET  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP17970522
 

4P-2120: TURBOCHARGER GP

4P-2120 TURBOCHARGER GP
S/N 2WG3606-UP
i00374431 SEBP1797
4P2120 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-4684 Y [1] TURBOCHARGER GP  
2. 3E-8017 M [4] LOCKNUT (M10X1.5-THD)  
3. 7C-7431 [1] GASKET  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17970523
 

4P-4682: TURBOCHARGER GP

4P-4682 TURBOCHARGER GP
FIELD REPLACEMENT FOR @@@@@ 4P-4683@@@@@, @@@@@ 4P-4684@@@@@, @@@@@ 4P-4685@@@@@
FIELD INSTALLATION
i00157875 SEBP1797
4P4682 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-2278 [1] CARTRIDGE GP-TURBOCHARGER  
2. 7C-5626 [1] HOUSING-COMPRESSOR  
3. 9Y-6479 [1] HOUSING-TURBINE  
4. 7C-5802 [3] PLATE-CLAMP (COMPRESSOR)  
5. 7C-6672 [2] PLATE-CLAMP (TURBINE)  
6. 7C-6671 M [6] BOLT AS  
7. 7C-6670 M [4] BOLT (M8X1.25X12.5-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17970524
 

4P-4683: TURBOCHARGER GP

4P-4683 TURBOCHARGER GP
S/N 2WG2601-UP
PART OF 9Y-6484 TURBOCHARGER GP
FIELD REPLACEMENT ORDER @@@@@ 4P-4682@@@@@
ALSO AN ATTACHMENT
i00376454 SEBP1797
4P4683 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-2278 Y [1] CARTRIDGE GP-TURBOCHARGER  
2. 7C-5626 [1] HOUSING-COMPRESSOR  
3. 9Y-6479 [1] HOUSING-TURBINE  
4. 7C-5802 [3] PLATE-CLAMP (COMPRESSOR)  
5. 7C-6672 [2] PLATE-CLAMP (TURBINE)  
6. 8H-3710 [1] SCREW-TAPPING (6-32X0.375-IN)  
  1W-4795 [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
7. 7C-6671 M [6] BOLT AS  
8. 7C-6670 M [4] BOLT (M8X1.25X12.5-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17970525
 

4P-4684: TURBOCHARGER GP

4P-4684 TURBOCHARGER GP
S/N 2WG3606-UP
PART OF 4P-2120 TURBOCHARGER GP
FIELD REPLACEMENT ORDER @@@@@ 4P-4682@@@@@
i00376457 SEBP1797
4P4684 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-2278 Y [1] CARTRIDGE GP-TURBOCHARGER  
2. 7C-5626 [1] HOUSING-COMPRESSOR  
3. 9Y-6479 [1] HOUSING-TURBINE  
4. 7C-5802 [3] PLATE-CLAMP (COMPRESSOR)  
5. 7C-6672 [2] PLATE-CLAMP (TURBINE)  
6. 1W-4795 [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
7. 7C-6671 M [6] BOLT AS  
8. 7C-6670 M [4] BOLT (M8X1.25X12.5-MM)  
   
  8H-3710 F [1] SCREW-TAPPING (6-32X0.375-IN)  
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17970526
 

4P-4685: TURBOCHARGER GP

4P-4685 TURBOCHARGER GP
S/N 2WG2571-6699
PART OF 6I-2233 TURBOCHARGER GP
FIELD REPLACEMENT ORDER @@@@@ 6I-2278@@@@@
ALSO AN ATTACHMENT
i00376466 SEBP1797
4P4685 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-2278 Y [1] CARTRIDGE GP-TURBOCHARGER  
2. 7C-5626 [1] HOUSING-COMPRESSOR  
3. 9Y-6479 [1] HOUSING-TURBINE  
4. 7C-5802 [3] PLATE-CLAMP (COMPRESSOR)(COMPR)  
5. 7C-6672 [2] PLATE-CLAMP (TURBINE)(TURBINE)  
6. 1W-4795 [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
  8H-3710 [1] SCREW-TAPPING (6-32X0.375-IN)  
7. 7C-6671 M [6] BOLT AS  
8. 7C-6670 M [4] BOLT (M8X1.25X12.5-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17970527
 

4P-5874: TURBOCHARGER GP

4P-5874 TURBOCHARGER GP
S/N 2WG1660-3182
PART OF 7C-6342 TURBOCHARGER GP
i00384496 SEBP1797
4P5874 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-7522 Y [1] CARTRIDGE GP-TURBOCHARGER  
2. 7E-7524 [1] HOUSING-COMPRESSOR  
3. 4P-5873 [1] HOUSING AS-TURBINE  
4. 7C-5802 [3] PLATE-CLAMP (COMPRESSOR)  
5. 7C-6672 [2] PLATE-CLAMP (TURBINE)  
6. 1W-4795 [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
  8H-3710 [1] SCREW-TAPPING (6-32X0.375-IN)  
7. 7C-6671 M [6] BOLT AS  
8. 7C-6670 M [4] BOLT (M8X1.25X12.5-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP17970528
 

4P-6171: TURBOCHARGER GP

4P-6171 TURBOCHARGER GP
S/N 2WG2749-UP
i00384570 SEBP1797
4P6171 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-2293 Y [1] TURBOCHARGER GP  
2. 3E-8017 M [4] LOCKNUT (M10X1.5-THD)  
3. 7C-7431 [1] GASKET  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17970529
 

4W-2107: TURBOCHARGER GP

4W-2107 TURBOCHARGER GP
PROVIDES TURBO GP WITH EXHAUST FORWARD & WITH A V-BAND EXHAUST CONNECTION
FOR USE WITH 7W-9248 MANIFOLD GP-EXHAUST
AN ATTACHMENT
i00378358 SEBP1797
4W2107 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-2183 Y [1] TURBOCHARGER GP  
2. 8C-8734 CM [4] LOCKNUT  
3. 7C-7431 C [1] GASKET  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
New Turbocharger Models Have Left-Hand Threads On Compressor Nut And Turbine Shaft{1053,1052}
1994/03/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Improved Locknuts for the High Pressure Turbocharger to Exhaust Manifold Joint Are Used on Certain Commercial Engines {1052}
2012/08/10
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Turbocharger - Inspect/Clean
3114, 3116, and 3126 Industrial and Generator Set Engines
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger
3114, 3116, 3126 Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN 3116, 3126, C-7, C7, C-9, C9, 3306, 3406, C-15, AND 3412 ENGINE MODELS
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN 3116, 3126, C-7, C7, C-9, C9, 3306, 3406, C-15, AND 3412 ENGINE MODELS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Turbocharger - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Turbocharger - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Turbocharger - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Dealer Installed Air Inlet Heater Starting Aid Available{1058}
1993/09/27
New Turbocharger Models Have Left-Hand Threads On Compressor Nut And Turbine Shaft {1053,1052}
1994/02/28
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/02/24
Policy for Reusing the Turbocharger Turbine Housing {1065}
2003/07/14
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
Troubleshooting the Wastegate Canister {1052, 1057}
2009/01/26
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3116 :

TURBOCHARGER GP
143-1209 TURBOCHARGER GP
TURBOCHARGER GP
130-5921 TURBOCHARGER GP
TURBOCHARGER GP
127-7077 TURBOCHARGER GP
TURBOCHARGER GP
115-1182 TURBOCHARGER GP
TURBOCHARGER GP
107-7851 TURBOCHARGER GP
TURBOCHARGER GP
105-1818 TURBOCHARGER GP
TURBOCHARGER GP
102-8411 TURBOCHARGER GP
TURBOCHARGER GP
102-8407 TURBOCHARGER GP
TURBOCHARGER GP
4P-2120 TURBOCHARGER GP
TURBOCHARGER GP
4P-2120 TURBOCHARGER GP
TURBOCHARGER GP
4P-4682 TURBOCHARGER GP
TURBOCHARGER GP
4P-4683 TURBOCHARGER GP
TURBOCHARGER GP
4P-4684 TURBOCHARGER GP
TURBOCHARGER GP
4P-4685 TURBOCHARGER GP
TURBOCHARGER GP
4P-5874 TURBOCHARGER GP
TURBOCHARGER GP
4P-6171 TURBOCHARGER GP

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QUÉBEC, Quebec, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.