9Y-8997 TURBOCHARGER GP S/N 2WG1403-UP 3116 ENGINE - MACHINE



AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
FUEL SYSTEM
FILTER GP-FUEL
CONTROL GP-FUEL INJECTION
CONTROL GP-GOVERNOR

ENGINE - MACHINE 3116 ENGINE - MACHINE 2WG
 3116 Industrial Engine 2WG00001-UP SEBP1797 3116 2WG   (2018)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
TURBOCHARGER GP
9Y-6750 TURBOCHARGER GP
TURBOCHARGER GP
9Y-6750 TURBOCHARGER GP
TURBOCHARGER GP
9Y-8997 TURBOCHARGER GP
TURBOCHARGER GP
9Y-8998 TURBOCHARGER GP
 

#SEBP17970560
 

9Y-8997: TURBOCHARGER GP

9Y-8997 TURBOCHARGER GP
S/N 2WG1403-UP
i00433680 SEBP1797
9Y8997 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 9Y-6749 Y [1] TURBOCHARGER GP  
2. 3E-8017 M [4] LOCKNUT (M10X1.5-THD)  
3. 7C-7431 [1] GASKET  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17970561
 

9Y-8998: TURBOCHARGER GP

9Y-8998 TURBOCHARGER GP
215, 250 HP
i00433688 SEBP1797
9Y8998 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 7E-4818 Y [1] TURBOCHARGER GP  
2. 3E-8017 M [4] LOCKNUT (M10X1.5-THD)  
3. 7C-7431 [1] GASKET  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17970562
 

149-8280: BASE GP-FUEL FILTER

149-8280 BASE GP-FUEL FILTER
REAR OR REMOTE MOUNTED
FOR USE WITH @@@@@149-8281@@@@@, @@@@@149-8282@@@@@, @@@@@152-3894@@@@@
AN ATTACHMENT
i00823462 SEBP1797
1498280 BASE GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 112-6521 [1] BASE AS-FUEL FILTER  
2. 1R-0751 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
3. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
4. 6N-4414 [1] COVER-FILTER BASE  
5. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
6. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
7. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
8. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
 

#SEBP17970563
 

105-1695: CONTROL GP-FUEL INJECTION

105-1695 CONTROL GP-FUEL INJECTION
i00122976 SEBP1797
1051695 CONTROL GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 162-8756 [1] CONTROL GP-FUEL INJECTION  
2. 6V-5683 M [4] BOLT (M6X1X16-MM)  
  M   METRIC PART
 

#SEBP17970564
 

7W-6989: CONTROL GP-FUEL INJECTION

7W-6989 CONTROL GP-FUEL INJECTION
i00122410 SEBP1797
7W6989 CONTROL GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 162-8756 [1] CONTROL GP-FUEL INJECTION  
2. 6V-5683 M [4] BOLT (M6X1X16-MM)  
  M   METRIC PART
 

#SEBP17970565
 

4N-3829: CONTROL GP-GOVERNOR

4N-3829 CONTROL GP-GOVERNOR
POSITIVE LOCK & VERNIER
PART OF 6I-4028 CONTROL GP-GOVERNOR
AN ATTACHMENT
i00370420 SEBP1797
4N3829 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 8L-4282 [1] HUB  
2. 4N-4523 [1] HANDLE AS  
3. 4W-2541 C [1] SHAFT  
4. 4W-2542 C [1] SPRING  
5. 4N-4520 [1] GUIDE  
6. 5K-0605 [1] PLUG  
7. 3N-3786 [1] ROD-THROTTLE CONTROL  
8. 6B-5150 [2] LOCKNUT  
9. 3N-3787 [1] BRACKET-CONTROL  
10. 4J-6750 [1] SPACER (21-MM THK)  
11. 2H-0210 [1] SPRING-SHUTOFF  
12. 4N-4519 [1] QUADRANT-CONTROL  
13. 1K-6539 [1] PIN  
  3B-4604 [1] PIN-COTTER  
14. 6N-0775 C [1] RATCHET-GOVERNOR CONTROL  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17970566
 

4N-3830: CONTROL GP-GOVERNOR

4N-3830 CONTROL GP-GOVERNOR
POSITIVE LOCK
PART OF 7E-6447 CONTROL GP-GOVERNOR
AN ATTACHMENT
i00370423 SEBP1797
4N3830 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 4W-2541 [1] SHAFT  
2. 4N-4523 [1] HANDLE AS  
3. 4W-2542 [1] SPRING  
4. 4N-4520 [1] GUIDE  
5. 5K-0605 [1] PLUG  
6. 8L-4282 [1] HUB  
7. 6N-0775 C [1] RATCHET-GOVERNOR CONTROL  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17970567
 

6I-4028: CONTROL GP-GOVERNOR

6I-4028 CONTROL GP-GOVERNOR
POSITIVE LOCK
CANNOT BE USED WITH FREON COMPRESSOR MOUNTING
AN ATTACHMENT
i00398502 SEBP1797
6I4028 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 4N-3829 Y [1] CONTROL GP-GOVERNOR  
2. 8C-7506 M [2] SCREW-MACHINE (M8X1.25X40-MM)  
  8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
  5C-7261 M [2] NUT (M8X1.25-THD)  
3. 5C-9553 M [2] BOLT (M6X1X16-MM)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
  8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
5. 6I-4046 [1] BRACKET  
6. 6I-4029 [1] SHAFT-THROTTLE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP17970568
 

7C-5201: CONTROL GP-GOVERNOR

7C-5201 CONTROL GP-GOVERNOR
PROVIDES SOLID LINK GOVERNOR CONTROL LEVER
AN ATTACHMENT
i00408121 SEBP1797
7C5201 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 7C-5202 [1] LEVER  
2. 5C-9553 M [1] BOLT (M6X1X16-MM)  
  8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
  M   METRIC PART
 

#SEBP17970569
 

7C-5203: CONTROL GP-GOVERNOR

7C-5203 CONTROL GP-GOVERNOR
PROVIDES BROKEN LINK GOVERNOR CONTROL LEVER
AN ATTACHMENT
i00167681 SEBP1797
7C5203 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 7C-5204 [1] LEVER AS  
2. 7C-5206 [2] SPRING  
3. 7C-5205 [1] LEVER AS  
4. 5C-9553 M [1] BOLT (M6X1X16-MM)  
  6V-7646 [1] WASHER-HARD (7.2X25X2-MM THK)  
5. 7X-2533 M [1] BOLT (M6X1X35-MM)  
  8T-2228 [1] WASHER-HARD (6.5X17X2-MM THK)  
  M   METRIC PART
 

Information:

Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
New Turbocharger Models Have Left-Hand Threads On Compressor Nut And Turbine Shaft{1053,1052}
1994/03/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Improved Locknuts for the High Pressure Turbocharger to Exhaust Manifold Joint Are Used on Certain Commercial Engines {1052}
2012/08/10
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Turbocharger - Inspect/Clean
3114, 3116, and 3126 Industrial and Generator Set Engines
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger
3114, 3116, 3126 Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN 3116, 3126, C-7, C7, C-9, C9, 3306, 3406, C-15, AND 3412 ENGINE MODELS
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN 3116, 3126, C-7, C7, C-9, C9, 3306, 3406, C-15, AND 3412 ENGINE MODELS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Turbocharger - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Turbocharger - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Turbocharger - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Dealer Installed Air Inlet Heater Starting Aid Available{1058}
1993/09/27
New Turbocharger Models Have Left-Hand Threads On Compressor Nut And Turbine Shaft {1053,1052}
1994/02/28
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/02/24
Policy for Reusing the Turbocharger Turbine Housing {1065}
2003/07/14
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
Troubleshooting the Wastegate Canister {1052, 1057}
2009/01/26
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3116 :

TURBOCHARGER GP
9Y-6750 TURBOCHARGER GP
TURBOCHARGER GP
9Y-6750 TURBOCHARGER GP
TURBOCHARGER GP
9Y-6749 TURBOCHARGER GP
TURBOCHARGER GP
9Y-6748 TURBOCHARGER GP
TURBOCHARGER GP
9Y-6747 TURBOCHARGER GP
TURBOCHARGER GP
9Y-6746 TURBOCHARGER GP
TURBOCHARGER GP
9Y-6487 TURBOCHARGER GP
TURBOCHARGER GP
9Y-6486 TURBOCHARGER GP
TURBOCHARGER GP
9Y-8998 TURBOCHARGER GP
BASE GP-FUEL FILTER
149-8280 BASE GP-FUEL FILTER
CONTROL GP-FUEL INJECTION
105-1695 CONTROL GP-FUEL INJECTION
CONTROL GP-FUEL INJECTION
7W-6989 CONTROL GP-FUEL INJECTION
CONTROL GP-GOVERNOR
4N-3829 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
4N-3830 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
6I-4028 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
7C-5201 CONTROL GP-GOVERNOR

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QUÉBEC, Quebec, Canada