AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7C-7242 CONTROL GP-GOVERNOR LH MOUNTING NOT REQUIRED WHEN CONTROL PANEL IS RH MOUNTED FOR GEN SET ENGINES. POSITIVE LOCK FOR USE WITH AFTERCOOLED, TURBOCHARGED ENGINES ON RH OR LH MOUNTING LOCATIONS AN ATTACHMENT 3116


FUEL SYSTEM
CONTROL GP-GOVERNOR
GOVERNOR GP

ENGINE - MACHINE 3116 ENGINE - MACHINE 2WG
 3116 Industrial Engine 2WG00001-UP SEBP1797 3116 2WG   (2018)

FUEL SYSTEM

CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
4N-3829 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
4N-3830 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
6I-4028 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
7C-5201 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
7C-5203 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
7C-7242 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
7E-1524 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
7E-6447 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
7E-9429 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
7E-9955 CONTROL GP-GOVERNOR
 

#SEBP17970570
 

7C-7242: CONTROL GP-GOVERNOR

7C-7242 CONTROL GP-GOVERNOR
LH MOUNTING NOT REQUIRED WHEN CONTROL PANEL IS RH MOUNTED FOR GEN SET ENGINES. POSITIVE LOCK
FOR USE WITH AFTERCOOLED, TURBOCHARGED ENGINES ON RH OR LH MOUNTING LOCATIONS
AN ATTACHMENT
i00388069 SEBP1797
7C7242 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4224 BH [2] WASHER-HARD (8.8X16X2-MM THK)  
2. 8T-4197 BHM [2] BOLT (M8X1.25X40-MM)  
3. 9M-1311 [1] NUT-JAM (1/4-28-THD)  
4. 8B-3768 [1] ROD END  
5. 9S-1303 [1] PIN  
6. 7E-3838 [1] PIN-COTTER  
7. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
8. 7X-0457 M [2] BOLT (M8X1.25X130-MM)  
9. 7X-1795 [1] CABLE AS  
10. 7C-7634 [1] BRACKET  
11. 7E-7570 [1] BRACKET  
12. 8T-4121 BP [2] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4137 BPM [2] BOLT (M10X1.5X20-MM)  
  B   USE AS REQUIRED
  H   FOR RH MOUNTING ONLY
  M   METRIC PART
  P   FOR LH MOUNTING ONLY
 

#SEBP17970571
 

7E-1524: CONTROL GP-GOVERNOR

7E-1524 CONTROL GP-GOVERNOR
SOLID LIK GOVERNOR LEVER WITH 6.2MM HOLE AT 50MM RADIUS FOR CONNECTION
FOR USE WITH 2.3 GRAIN GOVERNOR
AN ATTACHMENT
i00399438 SEBP1797
7E1524 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-5240 [1] LEVER  
2. 6V-5683 M [2] BOLT (M6X1X16-MM)  
3. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  M   METRIC PART
 

#SEBP17970572
 

7E-6447: CONTROL GP-GOVERNOR

7E-6447 CONTROL GP-GOVERNOR
POSITIVE LOCK
CANNOT BE USED WITH FREON COMPRESSOR MOUNTING BRACKET, RH THROTTLE OR RIGHT SIDE MOUNTED START-STOP SWITCH
AN ATTACHMENT
i00407601 SEBP1797
7E6447 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-3830 Y [1] CONTROL GP-GOVERNOR  
2. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
3. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
4. 5C-7261 M [2] NUT (M8X1.25-THD)  
5. 6I-4046 [1] BRACKET  
6. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
7. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
8. 6I-4029 [1] SHAFT-THROTTLE  
9. 5C-9553 M [2] BOLT (M6X1X16-MM)  
10. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP17970573
 

7E-9429: CONTROL GP-GOVERNOR

7E-9429 CONTROL GP-GOVERNOR
S/N 2WG1829-UP
26.5-MM HOLES FOR CONNECTION AT 45/55-MM RADIUS
i00157920 SEBP1797
7E9429 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0484 [1] LEVER AS  
2. 6I-0483 [2] SPRING  
3. 6I-0482 [1] LEVER AS  
4. 5C-9553 M [1] BOLT (M6X1X16-MM)  
  6V-7646 [1] WASHER-HARD (7.2X25X2-MM THK)  
5. 8C-8451 M [1] BOLT (M6X1X40-MM)  
  8T-2228 [1] WASHER-HARD (6.5X17X2-MM THK)  
  M   METRIC PART
 

#SEBP17970574
 

7E-9955: CONTROL GP-GOVERNOR

7E-9955 CONTROL GP-GOVERNOR
S/N 2WG1361-1828
ALSO AN ATTACHMENT
i00392404 SEBP1797
7E9955 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-5204 [1] LEVER AS  
2. 4P-0514 [2] SPRING  
3. 4P-0515 [1] LEVER AS  
4. 5C-9553 M [1] BOLT (M6X1X16-MM)  
  6V-7646 [1] WASHER-HARD (7.2X25X2-MM THK)  
5. 7X-2533 M [1] BOLT (M6X1X35-MM)  
  8T-2228 [1] WASHER-HARD (6.5X17X2-MM THK)  
  M   METRIC PART
 

#SEBP17970575
 

4P-0666: DRIVE GP-GOV & TRANSFER PUMP

4P-0666 DRIVE GP-GOV & TRANSFER PUMP
S/N 2WG1-1388
FLEXIBLE DRIVE
PART OF 4P-1581 GOVERNOR GP-UNIT INJECTOR
ALSO AN ATTACHMENT
i00167556 SEBP1797
4P0666 DRIVE GP-GOV & TRANSFER PUMP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-8598 [1] RING-RETAINING  
2. 7W-9526 [1] SPRING-TORSION  
3. 7W-5568 [1] SHAFT AS-THROTTLE  
4. 6V-5213 M [2] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
5. 7C-5593 [1] SPRING-THROTTLE BIAS  
6. 4D-9986 [2] SEAL-O-RING  
7. 4P-3953 [1] PISTON AS  
8. 7E-0156 [1] FITTING-INLET  
9. 7W-5621 [1] COVER-TRANSFER PUMP  
10. 7C-5294 [1] SPRING  
11. 8C-6364 M [3] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
12. 7W-7381 [1] FITTING-OUTLET  
13. 3J-1907 [2] SEAL-O-RING  
14. 7W-7383 [2] VALVE AS-CHECK  
15. 7W-5571 [1] LEVER-CONTROL  
16. 8T-7050 M [1] SETSCREW-SOCKET (M5X0.8X12-MM)  
17. 4P-0665 [1] HOUSING AS-DRIVE  
18. 7S-6798 [1] SEAL-LIP TYPE  
19. 7S-5005 [2] DOWEL  
20. 2K-5830 [2] BEARING AS-NEEDLE  
21. 9Y-3107 M [1] BOLT (M8X1.25X45-MM)  
22. 7W-5615 [1] SLEEVE AS-PUMP  
23. 7W-9638 [1] SHAFT AS-SHUTOFF  
24. 7W-4328 [1] SPRING-SHUTOFF  
25. 7W-9402 [1] LEVER-SHUTOFF  
26. 7W-9403 [1] LEVER-SHUTOFF  
27. 8C-5899 [1] PIN-SPRING  
28. 8T-5433 M [4] BOLT-SOCKET HEAD (M3X0.5X1.5-MM)  
  M   METRIC PART
 

#SEBP17970576
 

4P-4775: DRIVE GP-GOV & TRANSFER PUMP

4P-4775 DRIVE GP-GOV & TRANSFER PUMP
S/N 2WG1389-1828
FLEXIBLE DRIVE
PART OF 4P-4778 GOVERNOR GP-UNIT INJECTOR
ALSO AN ATTACHMENT
i00167562 SEBP1797
4P4775 DRIVE GP-GOV & TRANSFER PUMP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-8598 [1] RING-RETAINING  
2. 7W-9526 [1] SPRING-TORSION  
3. 7W-5568 [1] SHAFT AS-THROTTLE  
4. 6V-5213 M [2] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
5. 7C-5593 [1] SPRING-THROTTLE BIAS  
6. 4D-9986 [2] SEAL-O-RING  
7. 4P-3953 [1] PISTON AS  
8. 7E-0156 [1] FITTING-INLET  
9. 7W-5621 [1] COVER-TRANSFER PUMP  
10. 7C-5294 [1] SPRING  
11. 8C-6364 M [3] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
12. 7E-9898 [1] CONNECTOR  
13. 3J-1907 [2] SEAL-O-RING  
14. 7W-7383 [2] VALVE AS-CHECK  
15. 7W-5571 [1] LEVER-CONTROL  
16. 8T-7050 M [1] SETSCREW-SOCKET (M5X0.8X12-MM)  
17. 4P-0665 [1] HOUSING AS-DRIVE  
18. 7S-6798 [1] SEAL-LIP TYPE  
19. 7S-5005 [2] DOWEL  
20. 2K-5830 [2] BEARING AS-NEEDLE  
21. 9Y-0208 [1] BUSHING-TERMINAL  
22. 9Y-3107 M [1] BOLT (M8X1.25X45-MM)  
23. 7X-4805 [6] SEAL-O-RING  
24. 7W-9638 [1] SHAFT AS-SHUTOFF  
25. 7W-4328 [1] SPRING-SHUTOFF  
26. 7W-9402 [1] LEVER-SHUTOFF  
27. 7W-9403 [1] LEVER-SHUTOFF  
28. 8C-5899 [1] PIN-SPRING  
29. 8T-5433 M [4] BOLT-SOCKET HEAD (M3X0.5X1.5-MM)  
30. 7W-5615 [1] SLEEVE AS-PUMP  
  M   METRIC PART
 

#SEBP17970577
 

6I-0232: DRIVE GP-GOV & TRANSFER PUMP

6I-0232 DRIVE GP-GOV & TRANSFER PUMP
S/N 2WG1823-2838
PART OF 6I-0231 GOVERNOR GP-UNIT INJECTOR
ALSO AN ATTACHMENT
i00167650 SEBP1797
6I0232 DRIVE GP-GOV & TRANSFER PUMP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-8598 [2] RING-RETAINING  
2. 4P-5675 [1] SPRING-TORSION  
3. 4P-3538 [1] SHAFT-THROTTLE  
4. 6V-5213 M [2] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
5. 7E-3944 [1] SLEEVE  
6. 4D-9986 [2] SEAL-O-RING  
7. 4P-3953 [1] PISTON AS  
8. 7E-0156 [1] FITTING-INLET  
9. 7W-5621 [1] COVER-TRANSFER PUMP  
10. 7C-5294 [1] SPRING  
11. 8C-6364 M [3] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
12. 7E-9898 [1] CONNECTOR  
13. 3J-1907 [2] SEAL-O-RING  
14. 7W-7383 [2] VALVE AS-CHECK  
15. 7E-3943 [1] LEVER-CONTROL  
16. 9Y-9846 M [1] SCREW-LOCATOR  
17. 4P-0665 [1] HOUSING AS-DRIVE  
18. 7S-6798 [1] SEAL-LIP TYPE  
19. 7S-5005 [2] DOWEL  
20. 2K-5830 [2] BEARING AS-NEEDLE  
21. 9Y-3107 M [1] BOLT (M8X1.25X45-MM)  
22. 7E-3942 [1] BRACKET  
23. 7W-5615 [1] SLEEVE AS-PUMP  
24. 7W-9638 [1] SHAFT AS-SHUTOFF  
25. 7W-4328 [1] SPRING-SHUTOFF  
26. 7W-9402 [1] LEVER-SHUTOFF  
27. 7W-9403 [1] LEVER-SHUTOFF  
28. 8C-5899 [1] PIN-SPRING  
29. 9X-8902 M [4] BOLT-SOCKET HEAD (M3X0.5X8-MM)  
  M   METRIC PART
 

#SEBP17970578
 

7E-8794: DRIVE GP-GOV & TRANSFER PUMP

7E-8794 DRIVE GP-GOV & TRANSFER PUMP
S/N 2WG2304-UP
PART OF 100-4499, 100-6179, 130-7323, 131-4852, 133-3062, 4P-5503, 6I-4267 GOVERNOR GP-UNIT INJECTOR
ALSO AN ATTACHMENT
i00122334 SEBP1797
7E8794 DRIVE GP-GOV & TRANSFER PUMP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-5612 [1] HOUSING AS-FRONT  
1A. 101-0768 [1] GEAR AS-DRIVE (44-TEETH)  
  8T-0114 [1] PIN-SPRING  
1B. 7S-6798 [1] SEAL-LIP TYPE  
1C. 7S-5005 [2] DOWEL  
1D. 9Y-3107 M [1] BOLT (M8X1.25X45-MM)  
2. [1] SPRING-TORSION  
3. 4P-9490 [1] SHAFT AS-SHUTOFF  
3A. 9X-8902 M [4] BOLT-SOCKET HEAD (M3X0.5X8-MM)  
3B. 4P-9492 [1] BRACKET-SHAFT  
3C. 4P-9493 [1] LEVER-SHUTOFF (SOLENOID)  
3D. 4P-9494 [1] SPRING-SHUTOFF  
3E. 105-0585 [1] LEVER-SHUTOFF (OUTPUT)  
4. 6V-5213 M [2] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
5. 7W-5615 [1] SLEEVE AS-PUMP  
  1W-0565 [1] RING-RETAINING  
6. 4D-9986 [2] SEAL-O-RING  
7. 4P-3953 [1] PISTON AS  
8. 7E-0156 [1] FITTING-INLET  
9. 4P-4224 [1] COVER-TRANSFER PUMP  
10. 7C-5294 [1] SPRING  
11. 8C-6364 M [3] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
12. 7E-9898 [1] CONNECTOR  
13. 3J-1907 [2] SEAL-O-RING  
14. 7W-7383 [2] VALVE AS-CHECK  
15. 7E-3943 [1] LEVER-CONTROL  
16. 9Y-9846 M [1] SCREW-LOCATOR  
17. 6L-8598 [2] RING-RETAINING  
18. 4P-3538 [1] SHAFT-THROTTLE  
19. 7E-3944 [1] SLEEVE  
  M   METRIC PART
 

#SEBP17970579
 

7W-8179: DRIVE GP-GOV & TRANSFER PUMP

7W-8179 DRIVE GP-GOV & TRANSFER PUMP
S/N 2WG1-1388
PART OF 7C-6951 GOVERNOR GP-UNIT INJECTOR
ALSO AN ATTACHMENT
i00194878 SEBP1797
7W8179 DRIVE GP-GOV & TRANSFER PUMP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
2. 8T-0276 CM [1] BOLT (M8X1.25X45-MM)  
3. 9Y-7567 [1] SPRING-GOVERNOR DRIVE  
4. 9Y-0275 [1] COVER-GOVERNOR DRIVE  
5. 7W-9526 [1] SPRING-TORSION  
6. 7C-5593 [1] SPRING-THROTTLE BIAS  
7. 7W-9638 [1] SHAFT AS-SHUTOFF  
8. ZC [1] LEVER-SHUT OFF  
9. ZC [1] LEVER-SHUT OFF  
10. ZC [1] PIN-SPRING  
11. 8T-5433 CM [4] BOLT-SOCKET HEAD (M3X0.5X1.5-MM)  
12. 6V-5213 M [2] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
13. 9Y-0273 [1] GEAR AS-GOVERNOR DRIVE  
14. 9Y-3289 C [1] DOWEL  
15. 4D-9986 [2] SEAL-O-RING  
16. 4P-3953 [1] PISTON AS  
17. 7W-7379 [1] FITTING-INLET  
18. 7W-5621 [1] COVER-TRANSFER PUMP  
19. 7C-5294 [1] SPRING  
20. 8C-6364 M [3] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
21. 7W-7381 [1] FITTING-OUTLET  
22. 3J-1907 [2] SEAL-O-RING  
23. 7W-7383 [2] VALVE AS-CHECK  
24. 7W-5571 [1] LEVER-CONTROL  
25. 8T-7050 M [1] SETSCREW-SOCKET (M5X0.8X12-MM)  
26. 6L-8598 [1] RING-RETAINING  
27. 7W-5568 [1] SHAFT AS-THROTTLE  
28. 7W-5615 [1] SLEEVE AS-PUMP  
29. 1W-0565 [1] RING-RETAINING  
30. 7W-5558 [1] HOUSING AS-GOVERNOR  
31. Z [1] CARRIER AS-DRIVE  
32. Z [1] DOWEL  
33. Z [2] BEARING-NEEDLE  
34. 7S-5005 [2] DOWEL  
35. 7S-6798 C [1] SEAL-LIP TYPE  
36. 9Y-0208 [1] BUSHING-TERMINAL  
37. Z [1] SHAFT  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Z   NOT SERVICED SEPARATELY
 

Information:

Engine News
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines{1264,1265}
1996/07/22
New Service Tool Calibration Pins For Mechanical Goverened Engines{1264,1265}
1996/07/22
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Procedure To Lessen Governor Control Lever Effort{1265}
1989/11/06
Use Correct Calibration Pin (1U9786) When Calibrating Governor; Do Not Use 1U7305 Insertion Tool{0706,0782,1264}
1989/11/06
New Seal Used In Governor Fastener Group{1264}
1990/01/29
New Latching Fuel Solenoid Assemblies{1259}
1990/09/03
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17

Caterpillar Parts SIS Catalog 3116 :

CONTROL GP-GOVERNOR
7C-5203 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
7C-5201 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
6I-4028 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
4N-3830 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
4N-3829 CONTROL GP-GOVERNOR
CONTROL GP-FUEL INJECTION
7W-6989 CONTROL GP-FUEL INJECTION
CONTROL GP-FUEL INJECTION
105-1695 CONTROL GP-FUEL INJECTION
BASE GP-FUEL FILTER
149-8280 BASE GP-FUEL FILTER
CONTROL GP-GOVERNOR
7E-1524 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
7E-6447 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
7E-9429 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
7E-9955 CONTROL GP-GOVERNOR
DRIVE GP-GOV & TRANSFER PUMP
4P-0666 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
4P-4775 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
6I-0232 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QUÉBEC, Quebec, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.