AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7W-4812 FASTENER GP-FUEL INJ PUMP PART OF 105-1819 GOVERNOR GP, 101-3186, 101-3187, 110-2395, 110-2396, 110-2397, 110-2398, 113-4895, 113-4896, 4P-1693, 4P-1694, 4P-1695, 4P-5527, 4P-5796, 6I-3701, 7E-7661 GOVERNOR GP-UNIT INJECTOR 3116


FUEL SYSTEM
PUMP GP-FUEL INJECTION
LINES GP-FUEL
PUMP GP-FUEL PRIMING
FILTER GP-FUEL

ENGINE - MACHINE 3116 ENGINE - MACHINE 2WG
 3116 Industrial Engine 2WG00001-UP SEBP1797 3116 2WG   (2018)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
PUMP GP-FUEL INJECTION
107-7734 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7C-1500 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7C-1500 PUMP GP-FUEL INJECTION
 

#SEBP17970580
 

7W-4812: FASTENER GP-FUEL INJ PUMP

7W-4812 FASTENER GP-FUEL INJ PUMP
PART OF 105-1819 GOVERNOR GP, 101-3186, 101-3187, 110-2395, 110-2396, 110-2397, 110-2398, 113-4895, 113-4896, 4P-1693, 4P-1694, 4P-1695, 4P-5527, 4P-5796, 6I-3701, 7E-7661 GOVERNOR GP-UNIT INJECTOR
i00122408 SEBP1797
7W4812 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3872 J [1] SLEEVE  
2. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
3. 6V-5218 M [3] BOLT (M8X1.25X35-MM)  
4. 9Y-5295 [1] TUBE  
5. 6F-6673 [1] SEAL-O-RING  
6. 7C-3839 [1] CLIP-SPRING  
7. 7E-0844 [1] SEAL  
8. 1T-1068 [1] SEAL-O-RING (FUEL INJECTION PUMP)  
  J   INSTALL SLEEVE IN FRONT HOUSING
  M   METRIC PART
 

#SEBP17970581
 

149-8279: FASTENER GP-FUEL LINES

149-8279 FASTENER GP-FUEL LINES
FOR USE WITH @@@@@149-8282@@@@@, @@@@@149-8283@@@@@
AN ATTACHMENT
i01026654 SEBP1797
1498279 FASTENER GP-FUEL LINES Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-8178 [2] CLIP (LOOP)  
2. 8M-2773 [2] CLIP (LOOP)  
3. 8L-5449 [2] SPACER (0.375X0.75X0.69-IN THK)  
4. 3E-4352 [2] WASHER-HARD (8.8X20.5X2.5-MM THK)  
5. 6V-5219 M [2] BOLT (M8X1.25X40-MM)  
  M   METRIC PART
 

#SEBP17970582
 

149-8865: FASTENER GP-FUEL LINES

149-8865 FASTENER GP-FUEL LINES
FOR USE WITH @@@@@149-8283@@@@@, 2 MICRON FUEL FILTER
AN ATTACHMENT
i00942187 SEBP1797
1498865 FASTENER GP-FUEL LINES Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-2773 [2] CLIP (LOOP)  
2. 8L-5449 [2] SPACER (0.375X0.75X0.69-IN THK)  
3. 3E-4352 [2] WASHER-HARD (8.8X20.5X2.5-MM THK)  
4. 6V-5219 M [2] BOLT (M8X1.25X40-MM)  
  M   METRIC PART
 

#SEBP17970583
 

151-5058: FASTENER GP-FUEL LINES

151-5058 FASTENER GP-FUEL LINES
REQUIRES LH MOUNTED FUEL FILTER AND ELECTRIC BOOST PUMP
FOR USE WITH @@@@@151-5059@@@@@
AN ATTACHMENT
i00893628 SEBP1797
1515058 FASTENER GP-FUEL LINES Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] ANGLE  
2. 149-5947 [1] ELBOW  
3. 3J-1907 [1] SEAL-O-RING  
4. [1] CLAMP  
5. 3E-4352 [4] WASHER-HARD (8.8X20.5X2.5-MM THK)  
6. 6V-5218 M [1] BOLT (M8X1.25X35-MM)  
7. 5P-7970 M [2] NUT (M8X1.25-THD)  
  M   METRIC PART
 

#SEBP17970584
 

172-5321: FASTENER GP-FUEL LINES

172-5321 FASTENER GP-FUEL LINES
REQUIRES 1515056 LINES GP-FUEL FILTER
FOR USE WITH @@@@@149-8283@@@@@
AN ATTACHMENT
i01097471 SEBP1797
1725321 FASTENER GP-FUEL LINES Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 002-9372 [2] CLIP  
2. 3E-4353 [2] WASHER-HARD (11X25X3-MM THK)  
3. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
4. 3J-1907 [1] SEAL-O-RING  
5. 6V-8636 [1] CONNECTOR  
6. 6V-8397 [2] SEAL-O-RING  
7. 6V-9850 [1] ELBOW  
8. 6V-2317 M [1] BOLT (M8X1.25X30-MM)  
9. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
10. 9X-2099 M [1] STUD (M8X1.25X52.75-MM)  
11. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
12. 9X-2097 M [1] STUD (M8X1.25-THD)  
  M   METRIC PART
 

#SEBP17970585
 

172-4377: FASTENER GP-FUEL PUMP

172-4377 FASTENER GP-FUEL PUMP
FOR USE WITH LH MOUNTED FUEL FILTER AND ELECTRIC BOOST PUMP
AN ATTACHMENT
i01088159 SEBP1797
1724377 FASTENER GP-FUEL PUMP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-7970 M [2] NUT (M8X1.25-THD)  
2. 7X-0603 [4] WASHER-HARD (9.9X35X2.5-MM THK)  
3. 101-9762 [2] MOUNT  
4. 8C-5748 M [2] BOLT (M8X1.25X55-MM)  
5. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
6. 172-7835 [2] CLAMP  
  M   METRIC PART
 

#SEBP17970586
 

7E-0589: FILTER & LINES GP-FUEL

7E-0589 FILTER & LINES GP-FUEL
RH REAR, FLEXIBLE LINES
Type 1
FOR USE WITH @@@@@ 4N-3287@@@@@, REMOTE FUEL FILTER BASE
AN ATTACHMENT
i00397235 SEBP1797
7E0589 FILTER & LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7934 [2] WASHER-HARD (11X21X5-MM THK)  
2. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
3. 6V-8724 [2] ELBOW  
4. 3J-1907 [4] SEAL-O-RING  
5. 7E-0156 [1] FITTING-INLET  
6. 6V-8397 [4] SEAL-O-RING  
7. 8W-5425 I [1] HOSE AS  
8. 7E-0592 [1] PLATE  
9. 002-9372 [2] CLIP  
10. 8T-5043 [1] ADAPTER  
  1J-9671 [1] SEAL-O-RING  
11. 7E-0591 [1] BASE AS-FUEL FILTER  
  9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
12. 7E-0155 [1] SCREEN AS-FUEL  
13. 7C-5861 [1] TUBE AS  
14. 5F-7054 [1] SEAL-O-RING  
15. 6V-2317 M [3] BOLT (M8X1.25X30-MM)  
16. 6V-5842 M [1] BOLT (M10X1.5X40-MM)  
17. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
18. 8C-8581 M [1] BOLT-HIGH TEMPERATURE (M10X1.5X30-MM)  
19. 7C-7838 [1] VALVE AS  
20. 7W-7381 [1] FITTING-OUTLET  
21. 8W-5740 I [1] HOSE AS  
22. 2T-2305 [1] ELBOW  
23. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
24. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
  5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
25. 6N-4414 [1] COVER-FILTER BASE  
26. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
27. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
28. 5P-7970 M [1] NUT (M8X1.25-THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP17970587
 

7E-0589: FILTER & LINES GP-FUEL

7E-0589 FILTER & LINES GP-FUEL
RH REAR, FLEXIBLE LINES
Type 2
FOR USE WITH @@@@@ 4N-3287@@@@@, REMOTE FUEL FILTER BASE
AN ATTACHMENT
i00397238 SEBP1797
7E0589 FILTER & LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7934 [2] WASHER-HARD (11X21X5-MM THK)  
2. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
3. 6V-8724 C [1] ELBOW  
4. 3J-1907 [4] SEAL-O-RING  
5. 1P-1670 C [1] PLUG-SEAL  
6. 6V-8397 C [5] SEAL-O-RING  
7. 8W-5425 I [1] HOSE AS  
8. 4P-2413 C [1] PLATE  
9. 002-9372 B [2] CLIP  
10. 8T-5043 [1] ADAPTER  
  1J-9671 [1] SEAL-O-RING  
11. 7E-0591 [1] BASE AS-FUEL FILTER  
  9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
12. 5P-4116 C [2] WASHER-HARD (8.8X20.5X2-MM THK)  
13. 7E-5190 C [1] TUBE AS  
14. 5F-7054 [1] SEAL-O-RING  
15. 6V-2317 M [3] BOLT (M8X1.25X30-MM)  
16. 6V-1820 CM [4] BOLT (M10X1.5X30-MM)  
17. 6V-5839 C [5] WASHER (11X21X2.5-MM THK)  
18. 8T-7547 CM [2] BOLT (M8X1.25X30-MM)  
19. 7E-5189 C [1] VALVE AS (FUEL)  
20. 8T-0151 C [1] ADAPTER  
21. 7C-9323 C [1] MANIFOLD-EXHAUST  
22. 2T-2305 [1] ELBOW  
23. 1P-0436 B [1] GASKET (FUEL PRIMING PUMP)  
24. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
  5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
25. 6N-4414 B [1] COVER-FILTER BASE  
26. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
27. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
28. 5P-7970 M [1] NUT (M8X1.25-THD)  
29. 5P-7813 C [1] SEAL-O-RING  
30. 3N-3252 C [1] SPRING  
31. 6V-9850 C [1] ELBOW  
32. 3S-2093 CB [2] STRAP-CABLE  
33. 2Y-5829 CM [1] NUT (M10X1.5-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP17970588
 

7E-0589: FILTER & LINES GP-FUEL

7E-0589 FILTER & LINES GP-FUEL
RH REAR, FLEXIBLE LINES
Type 3
FOR USE WITH @@@@@ 4N-3287@@@@@, REMOTE FUEL FILTER BASE
AN ATTACHMENT
i00397243 SEBP1797
7E0589 FILTER & LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
2. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
3. 6V-8724 C [1] ELBOW  
4. 3J-1907 [4] SEAL-O-RING  
5. 1P-1670 C [1] PLUG-SEAL  
6. 6V-8397 C [5] SEAL-O-RING  
7. 8W-5425 I [1] HOSE AS  
8. 4P-2413 C [1] PLATE  
9. 002-9372 B [2] CLIP  
10. 8T-5043 [1] ADAPTER  
  1J-9671 [1] SEAL-O-RING  
11. 4N-8897 [1] BASE AS-FUEL FILTER  
  9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
12. 7X-7729 C [2] WASHER (11X25X3-MM THK)  
13. 7E-5190 C [1] TUBE AS  
14. 5F-7054 [1] SEAL-O-RING  
15. 6V-2317 M [4] BOLT (M8X1.25X30-MM)  
16. 6V-1820 CM [3] BOLT (M10X1.5X30-MM)  
17. 6V-5839 C [3] WASHER (11X21X2.5-MM THK)  
18. 8T-4137 CM [2] BOLT (M10X1.5X20-MM)  
19. 7E-5189 C [1] VALVE AS (FUEL)  
20. 8T-0151 C [1] ADAPTER  
21. 9C-7323 I [1] HOSE AS  
22. 2T-2305 [1] ELBOW  
23. 1P-0436 B [1] GASKET (FUEL PRIMING PUMP)  
24. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
  5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
25. 6N-4414 B [1] COVER-FILTER BASE  
26. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
27. 9M-1974 [5] WASHER-HARD (8.8X16X2-MM THK)  
28. 5P-7970 M [2] NUT (M8X1.25-THD)  
29. 5P-7813 C [1] SEAL-O-RING  
30. 3N-3252 C [1] SPRING  
31. 6V-9850 C [1] ELBOW  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP17970589
 

146-6692: FILTER GP-FUEL

146-6692 FILTER GP-FUEL
PART OF 164-3995 FILTER GP-WATER SEP & FUEL
AN ATTACHMENT
i00627368 SEBP1797
1466692 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 146-6695 J [1] FILTER ELEMENT-FUEL (WATER SEPARATOR)  
2. 146-6696 J [1] BOWL  
   
    AVAILABLE REPLACEMENT PART(S):
  147-1227 A [1] BOWL  
  147-1229 A [1] BOWL  
  147-1230 AJ [1] KIT-FUEL FILTER & WATER SEP  
    (THIS KIT PROVIDES REPLACEMENT SEALS FOR SEALS DAMAGED DURING INSTALLATION OF REPLACEMENT ELEMENT AND/OR BOWL.)
  A   NOT PART OF THIS GROUP
  J   KIT MARKED J INCLUDES PART(S) MARKED J
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Seal Used In Governor Fastener Group
1990/01/01
New Fuel Return Valve Prevents Siphoning
1990/01/01
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect
1990/06/01
New Fuel Setting Screw Cover And Bolt
1990/07/01
New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups
1990/11/01
1P8116 O-Ring Seal Available To Service Unit Injectors
1992/03/01
Fuel Injector Group Rack Movement
1992/05/01
4P6493 Governor Information Plate Available
1992/06/01
Governor Specifications Are Available Through The Technical Information System
1992/09/01
Replacement Governors For Early Engines
1992/10/01
Unit Injector Tip Seal Deterioration
1993/01/01
Measuring "Dynamic Rack" Of Unit Injectors
1993/06/01
New Fuel Injector Control Linkage
1993/08/01
New Control Assemblies Used In Fuel Injection Control Groups
1993/12/01
New O-Ring Seal Used On Unit Injector Tip{1290}
1995/11/20
Mechanical Unit Injector Identification Code {1290}
1995/12/20
Fuel Injector Sleeve Replacement Tooling{0703,1125}
1996/02/16
New Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/16
New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines{1264,1265}
1996/07/22
New Service Tool Calibration Pins For Mechanical Goverened Engines{1264,1265}
1996/07/22
Governor Shimming Is Determined By The Governor Test Bench Calibration{1264,1289}
1996/07/22
Replacing The Shutoff Assembly In Engines With Older Governors{1264,1289}
1996/07/22
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/22
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/23
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/04/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Use 170-9227 Reamer Shims To Aid In Reaming 3100 Engine Injector Sleeves {1250}
1999/03/01
New 173-1530 Injector Seating Tool Group Available{0710,1290}
1999/09/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/04/07
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/24
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/24
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Injectors Should Not Be Tested for Proper Operation Prior to Being Installed Into the Engine {1251, 1290}
2009/02/23
Operation and Maintenance Manual
Fuel Injection Timing - Check
3114, 3116, and 3126 Industrial and Generator Set Engines
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Installing Injectors on the 3116, 3116T, and 3126 Industrial Engines{1290}
Installing Injectors on the 3116, 3116T, and 3126 Industrial Engines{1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Injector Sleeve Inspection On Certain 3116 And 3126 Industrial Marine Engines
Injector Sleeve Inspection On Certain 3116 And 3126 Industrial Marine Engines
Service Letter-Australia
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-CFEL
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-CSARL
Injector Sleeve Inspection On Certain 3116 And 3126 Industrial Marine Engines
Injector Sleeve Inspection On Certain 3116 And 3126 Industrial Marine Engines
Service Letter-Americas
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Injector Sleeve Inspection On Certain 3116 And 3126 Industrial Marine Engines
Injector Sleeve Inspection On Certain 3116 And 3126 Industrial Marine Engines
Service Letter-Brazil
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Truck/Ag/Marine
Injector Sleeve Inspection On Certain 3116 And 3126 Industrial Marine Engines
Injector Sleeve Inspection On Certain 3116 And 3126 Industrial Marine Engines
Specifications
Unit Injector
3114, 3116, 3126 Engines
Unit Injector Mechanism
3114, 3116, 3126 Engines
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Service Letter-China
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Information Release Memo
CATERPILLAR REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN MECHANICAL UNIT FUEL INJECTORS
CATERPILLAR REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN MECHANICAL UNIT FUEL INJECTORS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Unit Injector - Test
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Fuel Timing Dimension - Adjust
3114, 3116, and 3126 Engines
Unit Injector - Adjust
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Unit Injector Synchronization - Adjust
3114, 3116, and 3126 Engines
Troubleshooting
Unit Injector Cranking Rack Position
3114, 3116 and 3126 Engines
Unit Injector Misfire
3114, 3116 and 3126 Engines
Unit Injector
3114, 3116 and 3126 Engines
Disassembly and Assembly
Unit Injector - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Unit Injector - Install
3114, 3116 and 3126 Engines
Service Magazine
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Procedure To Lessen Governor Control Lever Effort{1265}
1989/11/06
Use Correct Calibration Pin (1U9786) When Calibrating Governor; Do Not Use 1U7305 Insertion Tool{0706,0782,1264}
1989/11/06
New Fuel Return Valve Prevents Siphoning{1253,1274}
1989/12/25
New Seal Used In Governor Fastener Group{1264}
1990/01/29
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
New Fuel Setting Screw Cover And Bolt {1257}
1990/07/02
Setscrew And Nut Available For Fuel Setting And Injector Synchronization {1257}
1990/10/22
New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups{1208}
1990/11/05
Larger O-ring Seal Available For Oil Supply Port In Governor Housing{1264}
1991/05/13
1P8116 O-Ring Seal Available To Service Unit Injectors{1290}
1992/02/24
Fuel Injector Group Rack Movement{1290}
1992/05/18
4P6493 Governor Information Plate Available{7557}
1992/06/15
Governor Specifications Are Available Through The Technical Information System{1264,0374}
1992/09/07
Replacement Governors For Early Engines{1264}
1992/11/09
Unit Injector Tip Seal Deterioration {1290}
1993/01/25
Measuring "Dynamic Rack" Of Unit Injectors{0780}
1993/06/21
New Fuel Injector Control Linkage{1298}
1993/08/30
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}
1997/01/27
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/09
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
Pull the Injector Sleeve with a 139-0692 Sleeve Jaw {0706, 1713}
2000/04/17
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/04/07
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/24
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01

Caterpillar Parts SIS Catalog 3116 :

DRIVE GP-GOV & TRANSFER PUMP
7W-8179 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
6I-0232 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
4P-4775 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
4P-0666 DRIVE GP-GOV & TRANSFER PUMP
CONTROL GP-GOVERNOR
7E-9955 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
7E-9429 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
7E-6447 CONTROL GP-GOVERNOR
FASTENER GP-FUEL LINES
149-8279 FASTENER GP-FUEL LINES
FASTENER GP-FUEL LINES
149-8865 FASTENER GP-FUEL LINES
FASTENER GP-FUEL LINES
151-5058 FASTENER GP-FUEL LINES
FASTENER GP-FUEL LINES
172-5321 FASTENER GP-FUEL LINES
FASTENER GP-FUEL PUMP
172-4377 FASTENER GP-FUEL PUMP
FILTER & LINES GP-FUEL
7E-0589 FILTER & LINES GP-FUEL
FILTER & LINES GP-FUEL
7E-0589 FILTER & LINES GP-FUEL
FILTER & LINES GP-FUEL
7E-0589 FILTER & LINES GP-FUEL

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QUÉBEC, Quebec, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.