BASIC ENGINE
PISTON & ROD GPPOWER TAKE-OFF GP
BASIC ENGINE
PISTON & ROD GP#SEBP18090120
107-7639: PISTON & ROD GP
Parts for your 3114 ENGINE - MACHINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 107-7545 | [1] | CROWN AS-PISTON | |
2. | 107-7787 | [1] | RING-PISTON (TOP) | |
3. | 7E-5786 | [1] | RING-PISTON (INTERMEDIATE) | |
4. | 7C-5232 | [1] | RING-PISTON (OIL) | |
5. | 7C-0111 | [2] | RETAINER-PIN | |
6. | 524-7982 | [1] | PIN-PISTON | |
7. | 213-3193 | [1] | ROD AS-CONNECTING (NON-DRILLED) | |
7A. | 2W-0027 | [2] | BEARING (EYE END) | |
7B. | 229-6266 M | [2] | BOLT (M11X1.25X65-MM) | |
8. | 224-6638 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
419-6371 AB | BEARING-CONNECTING ROD (STANDARD) | |||
7C-6976 AB | BEARING-CONNECTING ROD (0.25-MM US) | |||
7C-6977 AB | BEARING-CONNECTING ROD (0.5-MM US) | |||
9. | 238-2716 | [1] | SKIRT-PISTON | |
379-8870 ABF | ROD AS-CONNECTING (NON-DRILLED) | |||
A | NOT PART OF THIS GROUP | |||
B | USE AS REQUIRED | |||
F | NOT SHOWN | |||
M | METRIC PART | |||
R | REMANUFACTURED PART MAY BE AVAILABLE |
#SEBP18090121
6I-4765: PISTON & ROD GP
Parts for your 3114 ENGINE - MACHINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 6I-1210 | [1] | CROWN AS-PISTON | |
2. | 105-1746 | [1] | RING-PISTON (TOP)(TOP) | |
3. | 7E-5786 | [1] | RING-PISTON (INTERMEDIATE)(INTERMEDIATE) | |
4. | 7C-5232 | [1] | RING-PISTON (OIL)(OIL) | |
5. | 7C-0111 | [2] | RETAINER-PIN | |
6. | 7C-3901 | [1] | PIN-PISTON | |
7. | 2W-9128 | [1] | ROD AS-CONNECTING | |
8. | 2W-0027 | [1] | BEARING (EYE END) | |
9. | 9N-3832 | [2] | BOLT-CONNECTING ROD | |
10. | 9L-7669 | [2] | NUT-CONNECTING ROD (7/16-20-THD) | |
11. | 7W-9415 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
7C-6976 A | [1] | BEARING-CONNECTING ROD (0.25-MM US) | ||
7C-6977 A | [1] | BEARING-CONNECTING ROD (0.5-MM US) | ||
12. | 4P-1549 | [1] | SKIRT-PISTON | |
A | NOT PART OF THIS GROUP | |||
R | REMANUFACTURED PART MAY BE AVAILABLE |
#SEBP18090122
7E-1300: PISTON & ROD GP
Parts for your 3114 ENGINE - MACHINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7E-1298 | [1] | BODY AS-PISTON | |
2. | 107-7787 | [1] | RING-PISTON (TOP) | |
3. | 7E-5786 | [1] | RING-PISTON (INTERMEDIATE) | |
4. | 7C-5232 | [1] | RING-PISTON (OIL) | |
5. | 7C-0111 | [2] | RETAINER-PIN | |
6. | 7C-0115 | [1] | PIN-PISTON | |
7. | 7W-9415 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
7C-6976 A | [1] | BEARING-CONNECTING ROD (0.25-MM US) | ||
7C-6977 A | [1] | BEARING-CONNECTING ROD (0.5-MM US) | ||
8. | 2W-9128 | [1] | ROD AS-CONNECTING | |
9. | 2W-0027 | [1] | BEARING (EYE END) | |
10. | 9N-3832 | [2] | BOLT-CONNECTING ROD | |
11. | 9L-7669 | [2] | NUT-CONNECTING ROD (7/16-20-THD) | |
A | NOT PART OF THIS GROUP | |||
R | REMANUFACTURED PART MAY BE AVAILABLE |
#SEBP18090123
7E-3579: PISTON & ROD GP
Parts for your 3114 ENGINE - MACHINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 115-4124 | [1] | BODY AS-PISTON | |
2. | 107-7787 | [1] | RING-PISTON (TOP) | |
3. | 7E-5786 | [1] | RING-PISTON (INTERMEDIATE) | |
4. | 7C-5232 | [1] | RING-PISTON (OIL) | |
5. | 7C-0111 | [2] | RETAINER-PIN | |
6. | 7C-0115 | [1] | PIN-PISTON | |
7. | 2W-9128 | [1] | ROD AS-CONNECTING | |
8. | 9N-3832 | [2] | BOLT-CONNECTING ROD | |
9. | 9L-7669 | [2] | NUT-CONNECTING ROD (7/16-20-THD) | |
10. | 2W-0027 | [1] | BEARING (EYE END) | |
11. | 7W-9415 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
7C-6976 A | BEARING-CONNECTING ROD (0.25-MM US) | |||
7C-6977 A | BEARING-CONNECTING ROD (0.5-MM US) | |||
A | NOT PART OF THIS GROUP | |||
R | REMANUFACTURED PART MAY BE AVAILABLE |
#SEBP18090124
7E-3579: PISTON & ROD GP
Parts for your 3114 ENGINE - MACHINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 115-4124 | [1] | BODY AS-PISTON | |
2. | 107-7787 | [1] | RING-PISTON (TOP) | |
3. | 7E-5786 | [1] | RING-PISTON (INTERMEDIATE) | |
4. | 7C-5232 | [1] | RING-PISTON (OIL) | |
5. | 7C-0111 | [2] | RETAINER-PIN | |
6. | 7C-0115 | [1] | PIN-PISTON | |
7. | 213-3193 | [1] | ROD AS-CONNECTING (NON-DRILLED) | |
7A. | 2W-0027 | [1] | BEARING (EYE END) | |
7B. | 195-0321 | [2] | BOLT | |
8. | 224-6638 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
7C-6976 AB | BEARING-CONNECTING ROD (0.25-MM US) | |||
7C-6977 AB | BEARING-CONNECTING ROD (0.5-MM US) | |||
A | NOT PART OF THIS GROUP | |||
B | USE AS REQUIRED | |||
R | REMANUFACTURED PART MAY BE AVAILABLE |
#SEBP18090125
9Y-5538: PISTON & ROD GP
Parts for your 3114 ENGINE - MACHINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 9Y-7452 | [1] | BODY AS-PISTON | |
2. | 7C-0115 | [1] | PIN-PISTON | |
3. | 7W-9415 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
7C-6976 A | [1] | BEARING-CONNECTING ROD (0.25-MM US) | ||
7C-6977 A | [1] | BEARING-CONNECTING ROD (0.5-MM US) | ||
4. | 7C-0111 | [1] | RETAINER-PIN | |
5. | 2W-9128 | [1] | ROD AS-CONNECTING | |
6. | 9N-3832 | [2] | BOLT-CONNECTING ROD | |
7. | 9L-7669 | [2] | NUT-CONNECTING ROD (7/16-20-THD) | |
8. | 2W-0027 | [1] | BEARING (EYE END) | |
9. | 107-7787 | [1] | RING-PISTON (TOP) | |
10. | 7E-5786 | [1] | RING-PISTON (INTERMEDIATE) | |
11. | 7C-5232 | [1] | RING-PISTON (OIL) | |
A | NOT PART OF THIS GROUP | |||
R | REMANUFACTURED PART MAY BE AVAILABLE |
#SEBP18090126
9Y-8543: PISTON & ROD GP
Parts for your 3114 ENGINE - MACHINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7E-3226 | [1] | CROWN AS-PISTON | |
2. | 105-1746 | [1] | RING-PISTON (TOP) | |
3. | 7E-5786 | [1] | RING-PISTON (INTERMEDIATE) | |
4. | 7C-5232 | [1] | RING-PISTON (OIL) | |
5. | 7C-0111 | [2] | RETAINER-PIN | |
6. | 7C-3901 | [1] | PIN-PISTON | |
7. | 2W-9128 | [1] | ROD AS-CONNECTING | |
8. | 2W-0027 | [1] | BEARING (EYE END) | |
9. | 9N-3832 | [2] | BOLT-CONNECTING ROD | |
10. | 9L-7669 | [2] | NUT-CONNECTING ROD (7/16-20-THD) | |
11. | 7W-9415 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
7C-6976 A | [1] | BEARING-CONNECTING ROD (0.25-MM US) | ||
7C-6977 A | [1] | BEARING-CONNECTING ROD (0.5-MM US) | ||
12. | 4P-1546 | [1] | SKIRT-PISTON | |
A | NOT PART OF THIS GROUP | |||
R | REMANUFACTURED PART MAY BE AVAILABLE |
#SEBP18090127
2W-4901: POWER TAKE-OFF GP
2W-4901 POWER TAKE-OFF GP
CLUTCH
FOR USE WITH SAE NO.2 FLYWHEEL HOUSING & NO.306 PILOT BEARING
AN ATTACHMENT
CLUTCH
FOR USE WITH SAE NO.2 FLYWHEEL HOUSING & NO.306 PILOT BEARING
AN ATTACHMENT
#SEBP18090128
2W-4903: POWER TAKE-OFF GP
#SEBP18090129
4P-3074: POWER TAKE-OFF GP
4P-3074 POWER TAKE-OFF GP
REAR CLUTCH SUPPORT IS REQUIRED FOR SIDE LOAD APPLICATIONS
FOR USE WITH IN-LINE LOAD ONLY, SAE NO. 1 FLYWHEEL AND FLYWHEEL HOUSING
CANNOT BE USED WITH REAR STUB SHAFT
AN ATTACHMENT
REAR CLUTCH SUPPORT IS REQUIRED FOR SIDE LOAD APPLICATIONS
FOR USE WITH IN-LINE LOAD ONLY, SAE NO. 1 FLYWHEEL AND FLYWHEEL HOUSING
CANNOT BE USED WITH REAR STUB SHAFT
AN ATTACHMENT
Information:
BASIC ENGINE
PISTON & ROD GP
Engine News
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Installation Instructions for Piston Packs{1225, 1239}
Installation Instructions for Piston Packs{1225, 1239}
Installation Instructions for Piston Packs{1225, 1239}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Information Release Memo
NEW FRACTURED SPLIT ROD IS CURRENTLY PRODUCTION RELEASED FOR THE C9, 3114, 3116 AND 3126 ENGINES
NEW FRACTURED SPLIT ROD IS CURRENTLY PRODUCTION RELEASED FOR THE C9, 3114, 3116 AND 3126 ENGINES
NEW FRACTURED SPLIT ROD IS CURRENTLY PRODUCTION RELEASED FOR THE C9, 3114, 3116 AND 3126 ENGINES
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Troubleshooting
Disassembly and Assembly
Piston Cooling Jets - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
1982/08/09
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
1978/04/17