AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W-6615 LINES GP-TURBOCHARGER OIL S/N 5EF838-UP FOR USE WITH @@@@@ 1W-8898@@@@@ ALSO AN ATTACHMENT 3114


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
LUBRICATION SYSTEM
FILTER GP-ENGINE OIL
PUMP GP-ENGINE OIL

ENGINE - MACHINE 3114 ENGINE - MACHINE 5EF
 3114 Industrial Engine 5EF00001-UP SEBP1809 3114 5EF   (2018)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
LINES GP-TURBOCHARGER OIL
4P-4737 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
4W-6615 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
7C-3581 LINES GP-TURBOCHARGER OIL
CARTRIDGE GP-TURBOCHARGER
6I-2278 CARTRIDGE GP-TURBOCHARGER
TURBOCHARGER GP
4P-2759 TURBOCHARGER GP
 

#SEBP18090200
 

4W-6615: LINES GP-TURBOCHARGER OIL

4W-6615 LINES GP-TURBOCHARGER OIL
S/N 5EF838-UP
FOR USE WITH @@@@@ 1W-8898@@@@@
ALSO AN ATTACHMENT
i00195410 SEBP1809
4W6615 LINES GP-TURBOCHARGER OIL Parts scheme
  For full view, you need register

Parts for your 3114 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1S-7057 [1] GASKET  
2. 6V-3940 M [4] BOLT (M8X1.25X25-MM)  
3. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
4. 7C-2309 [1] TUBE AS  
5. 6V-8724 [1] ELBOW  
6. 3J-1907 [1] SEAL-O-RING  
7. 7W-2398 [1] GASKET (OIL DRAIN)  
8. 7C-2307 [1] TUBE AS  
9. 9M-4849 [1] SEAL-O-RING  
10. 119-2942 [1] ADAPTER  
11. 4F-7391 [1] SEAL-O-RING  
12. 6V-5218 M [2] BOLT (M8X1.25X35-MM)  
13. 6V-8397 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP18090201
 

7C-3581: LINES GP-TURBOCHARGER OIL

7C-3581 LINES GP-TURBOCHARGER OIL
i00194829 SEBP1809
7C3581 LINES GP-TURBOCHARGER OIL Parts scheme
  For full view, you need register

Parts for your 3114 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1S-7057 [1] GASKET  
2. 6V-3940 M [4] BOLT (M8X1.25X25-MM)  
3. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
4. 7C-5924 [1] TUBE AS-SUPPLY  
5. 6V-8397 [1] SEAL-O-RING  
6. 6V-8724 [1] ELBOW  
7. 3J-1907 [1] SEAL-O-RING  
8. 7W-2398 [1] GASKET (OIL DRAIN)  
9. 7C-5925 [1] TUBE AS-DRAIN  
10. 9M-4849 [1] SEAL-O-RING  
11. 6V-5218 M [2] BOLT (M8X1.25X35-MM)  
12. 4F-7391 [1] SEAL-O-RING  
13. 119-2942 [1] ADAPTER  
  M   METRIC PART
 

#SEBP18090202
 

9Y-6222: MOUNTING GP-OIL FILTER

9Y-6222 MOUNTING GP-OIL FILTER
FOR USE WITH STANDARD OIL FILTER GP TO PROVIDE A LEFT SIDE MOUNTING
CANNOT BE USED WITH AIR CLEANER ON 3114 BASE MOUNTED INDUSTRIAL ENGINES
AN ATTACHMENT
i00444767 SEBP1809
9Y6222 MOUNTING GP-OIL FILTER Parts scheme
  For full view, you need register

Parts for your 3114 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-6220 [1] TUBE AS  
2. 5K-9090 [3] SEAL-O-RING  
3. 8T-8986 [2] ELBOW  
4. 4K-1388 [2] SEAL-O-RING  
5. 6V-5218 M [6] BOLT (M8X1.25X35-MM)  
6. 9M-1974 [8] WASHER-HARD (8.8X16X2-MM THK)  
7. 5F-9657 [3] SEAL-O-RING  
8. 7C-7489 [1] PLATE  
9. 7C-7488 [1] ADAPTER  
10. 7C-7490 [1] GASKET  
11. 3J-1907 [2] SEAL-O-RING  
12. 9S-4191 [2] PLUG (9/16-18-THD)  
13. 4F-9653 [1] SEAL-O-RING  
14. 4P-9128 [1] ADAPTER  
15. 6V-4249 M [2] BOLT (M10X1.5X50-MM)  
16. 7C-7495 [1] TUBE AS  
17. 6V-3940 M [1] BOLT (M8X1.25X25-MM)  
18. 9Y-6221 [1] SUPPORT-REAR  
19. 6V-5215 M [3] BOLT (M8X1.25X16-MM)  
20. 4P-8861 [1] BASE  
21. 8M-4987 [1] SEAL-O-RING  
22. 7C-7494 [1] SUPPORT-FRONT  
23. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
24. 6V-5839 [4] WASHER (11X21X2.5-MM THK)  
25. 6V-2317 M [2] BOLT (M8X1.25X30-MM)  
26. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
27. 3E-7440 [1] ELBOW  
28. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
29. 3D-2824 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP18090203
 

119-2925: PUMP GP-ENGINE OIL

119-2925 PUMP GP-ENGINE OIL
S/N 5EF1088-UP
PART OF 7E-2971 PUMP GP-ENGINE OIL
i00195238 SEBP1809
1192925 PUMP GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 3114 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-8087 [1] SHAFT AS  
2. 2W-8090 [1] SHAFT AS-IDLER  
3. 2W-8079 [1] WASHER (8.5X9.5X1.6-MM THK)  
4. 6V-5219 M [4] BOLT (M8X1.25X40-MM)  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 2W-8085 [1] GEAR-PUMP DRIVE (33-TEETH)  
7. 4W-4953 [1] BODY-OIL PUMP  
8. 2W-8078 [1] PLUNGER  
9. 105-1805 [1] SPRING  
10. 6V-5215 M [1] BOLT (M8X1.25X16-MM)  
11. 7E-3688 [1] BODY AS-OIL PUMP  
12. 7C-7225 [1] SLEEVE (10.8X12.54X27-MM)  
13. 7E-2844 [2] BEARING  
15. 7E-4611 [2] BUSHING-TERMINAL  
  M   METRIC PART
 

#SEBP18090204
 

119-2926: PUMP GP-ENGINE OIL

119-2926 PUMP GP-ENGINE OIL
S/N 5EF1084-UP
PART OF 7W-8599 PUMP GP-ENGINE OIL
i00519427 SEBP1809
1192926 PUMP GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 3114 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-8085 [1] GEAR-PUMP DRIVE (33-TEETH)  
2. 4W-4954 [1] BODY AS-OIL PUMP  
  4W-4952 [2] BODY-OIL PUMP  
  7C-7225 [2] SLEEVE (10.8X12.54X27-MM)  
3. 4W-4953 [1] BODY-OIL PUMP  
4. 6V-5219 M [4] BOLT (M8X1.25X40-MM)  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 2W-8087 [1] SHAFT AS  
7. 2W-8090 [1] SHAFT AS-IDLER  
8. 2W-8078 [1] PLUNGER  
9. 105-1805 [1] SPRING  
10. 6V-5215 M [1] BOLT (M8X1.25X16-MM)  
11. 2W-8079 [1] WASHER (8.5X9.5X1.6-MM THK)  
  M   METRIC PART
 

#SEBP18090205
 

4W-4951: PUMP GP-ENGINE OIL

4W-4951 PUMP GP-ENGINE OIL
S/N 5EF1-1083
ONE SECTION GEAR
PART OF 7W-8599 PUMP GP-ENGINE OIL
i00194729 SEBP1809
4W4951 PUMP GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 3114 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-8085 [1] GEAR-PUMP DRIVE (33-TEETH)  
2. 4W-4954 [1] BODY AS-OIL PUMP  
  4W-4952 [1] BODY-OIL PUMP  
3. 7C-7225 [1] SLEEVE (10.8X12.54X27-MM)  
4. 4W-4953 [1] BODY-OIL PUMP  
5. 6V-5219 M [4] BOLT (M8X1.25X40-MM)  
6. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
7. 2W-8087 [1] SHAFT AS  
8. 2W-8090 [1] SHAFT AS-IDLER  
9. 2W-8078 [1] PLUNGER  
10. 2W-8093 [1] SPRING  
11. 6V-5215 M [1] BOLT (M8X1.25X16-MM)  
12. 2W-8079 [1] WASHER (8.5X9.5X1.6-MM THK)  
  M   METRIC PART
 

#SEBP18090206
 

7E-2971: PUMP GP-ENGINE OIL

7E-2971 PUMP GP-ENGINE OIL
S/N 5EF838-1087
i00194857 SEBP1809
7E2971 PUMP GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 3114 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-3687 Y [1] PUMP GP-ENGINE OIL  
2. 8T-0643 M [2] BOLT (M10X1.5X80-MM)  
3. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP18090207
 

7E-2971: PUMP GP-ENGINE OIL

7E-2971 PUMP GP-ENGINE OIL
S/N 5EF1088-UP
i00194858 SEBP1809
7E2971 PUMP GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 3114 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-2925 CY [1] PUMP GP-ENGINE OIL  
2. 8T-0643 M [2] BOLT (M10X1.5X80-MM)  
3. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP18090208
 

7E-3687: PUMP GP-ENGINE OIL

7E-3687 PUMP GP-ENGINE OIL
S/N 5EF838-1087
ONE SECTION GEAR
PART OF 7E-2971 PUMP GP-ENGINE OIL
i00194865 SEBP1809
7E3687 PUMP GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 3114 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-8087 [1] SHAFT AS  
2. 2W-8090 [1] SHAFT AS-IDLER  
3. 2W-8078 [1] PLUNGER  
4. 2W-8093 [1] SPRING  
5. 6V-5215 M [1] BOLT (M8X1.25X16-MM)  
  2W-8079 [1] WASHER (8.5X9.5X1.6-MM THK)  
6. 2W-8085 [1] GEAR-PUMP DRIVE (33-TEETH)  
7. 4W-4953 [1] BODY-OIL PUMP  
8. 7E-3688 [1] BODY AS-OIL PUMP  
  7E-3689 [1] BODY-OIL PUMP  
9. 7C-7225 [1] SLEEVE (10.8X12.54X27-MM)  
10. 7E-2844 [2] BEARING  
11. 7E-4611 [2] BUSHING-TERMINAL  
12. 6V-5219 M [4] BOLT (M8X1.25X40-MM)  
  9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP18090209
 

7W-8599: PUMP GP-ENGINE OIL

7W-8599 PUMP GP-ENGINE OIL
S/N 5EF1-1083
ONE SECTION GEAR
i00194880 SEBP1809
7W8599 PUMP GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 3114 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-4951 Y [1] PUMP GP-ENGINE OIL  
2. 8T-0643 M [2] BOLT (M10X1.5X80-MM)  
3. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
New Turbocharger Models Have Left-Hand Threads On Compressor Nut And Turbine Shaft{1053,1052}
1994/03/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2004/04/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Turbocharger - Inspect/Clean
3114, 3116, and 3126 Industrial and Generator Set Engines
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Turbocharger - Inspect
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Disassembly and Assembly
Turbocharger - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Turbocharger - Remove
3114, 3116 and 3126 Engines
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Dealer Installed Air Inlet Heater Starting Aid Available{1058}
1993/09/27
New Turbocharger Models Have Left-Hand Threads On Compressor Nut And Turbine Shaft {1053,1052}
1994/02/28
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/02/24
Policy for Reusing the Turbocharger Turbine Housing {1065}
2003/07/14
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
Troubleshooting the Wastegate Canister {1052, 1057}
2009/01/26
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3114 :

LINES GP-TURBOCHARGER OIL
4P-4737 LINES GP-TURBOCHARGER OIL
LINES GP-ENGINE OIL
9Y-0203 LINES GP-ENGINE OIL
LINES GP-ENGINE OIL
7C-5873 LINES GP-ENGINE OIL
LINES GP-ENGINE OIL
7C-0897 LINES GP-ENGINE OIL
GAUGE GP-OIL LEVEL (DIPSTICK)
9Y-7067 GAUGE GP-OIL LEVEL (DIPSTICK)
GAUGE GP-OIL LEVEL (DIPSTICK)
9Y-0080 GAUGE GP-OIL LEVEL (DIPSTICK)
GAUGE GP-OIL LEVEL (DIPSTICK)
7W-8796 GAUGE GP-OIL LEVEL (DIPSTICK)
GAUGE GP-OIL LEVEL (DIPSTICK)
7E-3333 GAUGE GP-OIL LEVEL (DIPSTICK)
LINES GP-TURBOCHARGER OIL
7C-3581 LINES GP-TURBOCHARGER OIL
MOUNTING GP-OIL FILTER
9Y-6222 MOUNTING GP-OIL FILTER
PUMP GP-ENGINE OIL
119-2925 PUMP GP-ENGINE OIL
PUMP GP-ENGINE OIL
119-2926 PUMP GP-ENGINE OIL
PUMP GP-ENGINE OIL
4W-4951 PUMP GP-ENGINE OIL
PUMP GP-ENGINE OIL
7E-2971 PUMP GP-ENGINE OIL
PUMP GP-ENGINE OIL
7E-2971 PUMP GP-ENGINE OIL
PUMP GP-ENGINE OIL
7E-3687 PUMP GP-ENGINE OIL

Truck sale:

CAT 3114
USD $5,878 
CAT 3114

DPX Power
 
 
CAT 3114

L & L Equipment Sales
La Vergne, Tennessee
 
 
CAT 3114

L & L Equipment Sales
La Vergne, Tennessee
CAT 3114
Call 
CAT 3114

L & L Equipment Sales
La Vergne, Tennessee
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.