AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7E-7607 PUMP GP-FUEL INJECTION S/N 5EF838-1021 3114 ENGINE - MACHINE


FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
FILTER GP-FUEL

ENGINE - MACHINE 3114 ENGINE - MACHINE 5EF
 3114 Industrial Engine 5EF00001-UP SEBP1809 3114 5EF   (2018)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
INJECTOR GP-FUEL
127-8207 INJECTOR GP-FUEL
PUMP GP-FUEL INJECTION
7C-1500 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7C-1500 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7C-1500 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-7607 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-7607 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-7607 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-7607 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-7607 PUMP GP-FUEL INJECTION
 

#SEBP18090410
 

7E-7607: PUMP GP-FUEL INJECTION

7E-7607 PUMP GP-FUEL INJECTION
S/N 5EF838-1021
i00167719 SEBP1809
7E7607 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3114 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-0849 M [1] BOLT-SOCKET HEAD (M6X1X25-MM)  
2. 4P-1731 [1] INJECTOR GP-FUEL  
  7E-8953 [1] PUMP GP-FUEL  
  1P-8116 [1] SEAL-O-RING  
3. 6V-6228 [1] SEAL-O-RING  
4. 032-8970 [1] SEAL-O-RING  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP18090411
 

7E-7607: PUMP GP-FUEL INJECTION

7E-7607 PUMP GP-FUEL INJECTION
S/N 5EF838-1021
i00157918 SEBP1809
7E7607 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3114 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-0849 M [1] BOLT-SOCKET HEAD (M6X1X25-MM)  
2. 4P-1731 [1] INJECTOR GP-FUEL  
  1P-8116 [1] SEAL-O-RING  
3. 6V-6228 [1] SEAL-O-RING  
4. 032-8970 [1] SEAL-O-RING  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP18090412
 

7E-7607: PUMP GP-FUEL INJECTION

7E-7607 PUMP GP-FUEL INJECTION
S/N 5EF1022-1112
i00157917 SEBP1809
7E7607 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3114 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-0849 M [1] BOLT-SOCKET HEAD (M6X1X25-MM)  
2. 107-1230 [1] INJECTOR GP-FUEL  
3. 114-8718 [1] SEAL-O-RING  
4. 125-8274 [1] SEAL-O-RING  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP18090413
 

7E-7607: PUMP GP-FUEL INJECTION

7E-7607 PUMP GP-FUEL INJECTION
S/N 5EF1113-UP
Type 1
i00157919 SEBP1809
7E7607 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3114 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8442 CM [1] BOLT-SOCKET HEAD (M6X1X30-MM)  
2. 127-8222 C [1] INJECTOR GP-FUEL  
3. 114-8718 [1] SEAL-O-RING  
4. 9X-8267 C [1] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP18090414
 

7E-7607: PUMP GP-FUEL INJECTION

7E-7607 PUMP GP-FUEL INJECTION
S/N 5EF1113-UP
Type 2
i06268347 SEBP1809
7E7607 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3114 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 139-5925 CM [1] BOLT-SOCKET HEAD (M6X1X30-MM)  
2. 127-8222 [1] INJECTOR GP-FUEL  
3. 114-8718 [1] SEAL-O-RING  
4. 9X-8267 [1] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP18090415
 

7E-0786: PUMP GP-FUEL PRIMING

7E-0786 PUMP GP-FUEL PRIMING
Type 1
CANNOT BE USED WITH AIR COMPRESSOR
AN ATTACHMENT
i00397527 SEBP1809
7E0786 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3114 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4176 M [1] BOLT (M12X1.75X90-MM)  
2. 8T-4971 M [1] BOLT (M6X1X30-MM)  
  8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 4W-0788 [1] PUMP AS-FUEL PRIMING  
4. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
  8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
5. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
6. 9Y-1760 [1] BRACKET-PRIMING PUMP  
7. 7X-0818 M [1] BOLT (M8X1.25X45-MM)  
8. 3J-1907 [2] SEAL-O-RING  
9. 6V-8724 [1] ELBOW  
10. 9Y-1763 [1] TUBE AS  
  6V-8397 [2] SEAL-O-RING  
11. 6V-8636 [1] CONNECTOR  
  M   METRIC PART
 

#SEBP18090416
 

7E-0786: PUMP GP-FUEL PRIMING

7E-0786 PUMP GP-FUEL PRIMING
Type 2
CANNOT BE USED WITH AIR COMPRESSOR
AN ATTACHMENT
i00397528 SEBP1809
7E0786 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3114 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4176 M [1] BOLT (M12X1.75X90-MM)  
2. 8T-4971 M [1] BOLT (M6X1X30-MM)  
  8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 105-2508 [1] PUMP AS-FUEL PRIMING  
4. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
  8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
5. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
6. 9Y-1760 [1] BRACKET-PRIMING PUMP  
7. 7X-0818 M [1] BOLT (M8X1.25X45-MM)  
8. 3J-1907 [2] SEAL-O-RING  
9. 6V-8636 C [2] CONNECTOR  
10. 7E-1363 C [1] TUBE AS  
  6V-8397 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP18090417
 

8N-3365: PUMP GP-FUEL PRIMING

8N-3365 PUMP GP-FUEL PRIMING
PART OF 8N-5251 PUMP GP-FUEL PRM & PRIM FILTER
AN ATTACHMENT
i00157299 SEBP1809
8N3365 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3114 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6350 [1] BASE AS-FUEL FILTER  
1A. 8N-0803 [1] BASE-FILTER  
1B. 7E-5346 [1] VALVE AS (FUEL CHECK)  
1C. 9S-8003 [2] PLUG (1/2-20-THD)  
1D. 1J-9671 [2] SEAL-O-RING  
2. 105-2508 [1] PUMP AS-FUEL PRIMING  
3. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
  5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
5. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
 

#SEBP18090418
 

4P-7206: PUMP GP-FUEL PRM & PRIM FILTER

4P-7206 PUMP GP-FUEL PRM & PRIM FILTER
REAR SIDE MOUNTED
Type 1
AN ATTACHMENT
i00385043 SEBP1809
4P7206 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 3114 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5839 [4] WASHER (11X21X2.5-MM THK)  
2. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
3. 2Y-5829 M [1] NUT (M10X1.5-THD)  
4. 4P-9613 [1] PLATE  
5. 6V-4248 M [1] BOLT (M10X1.5X25-MM)  
6. 8H-2807 [1] NUT (3/8-24-THD)  
7. 1L-3769 [1] RING-RETAINING  
8. 2J-0157 [1] SEAL-O-RING  
9. 8H-2778 [1] SEAL-RING  
10. 9M-2341 [1] FILTER ELEMENT-WTR SEP & FUEL (STANDARD EFFICIENCY)  
11. 7H-9678 [1] RETAINER-ELEMENT  
12. 2H-3429 [1] RING-RETAINING  
13. 7S-9323 [1] SPRING  
14. 8H-2810 [1] CASE AS-FILTER  
15. 9M-8406 [1] CLIP (LOOP)  
16. 5P-1442 E HOSE (103CM)  
17. 4P-7300 [1] BRACKET  
18. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
19. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
21. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
22. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
23. 8T-4133 M [2] NUT (M10X1.5-THD)  
24. 5P-4961 [2] CLAMP-HOSE  
25. 5P-1404 [1] ADAPTER  
26. 2M-9780 [1] SEAL-O-RING  
27. 5P-4924 [2] ELBOW  
28. 3J-1907 [2] SEAL-O-RING  
29. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
30. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
31. 105-2508 [1] PUMP AS-FUEL PRIMING  
  229-3218 [2] VALVE AS  
  7L-9061 [1] SEAL-O-RING  
32. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
33. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
34. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
35. 8N-8205 [1] BASE AS-FUEL FILTER  
  1W-3348 [1] BASE  
  1J-9671 [2] SEAL-O-RING  
  7E-5346 [1] VALVE AS  
  9S-8003 [1] PLUG (1/2-20-THD)  
36. 3K-0360 [1] SEAL-O-RING  
37. 5P-6944 [1] ADAPTER  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP18090419
 

4P-7206: PUMP GP-FUEL PRM & PRIM FILTER

4P-7206 PUMP GP-FUEL PRM & PRIM FILTER
REAR SIDE MOUNTED
Type 2
AN ATTACHMENT
i00385044 SEBP1809
4P7206 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 3114 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5839 [4] WASHER (11X21X2.5-MM THK)  
2. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
3. 2Y-5829 M [1] NUT (M10X1.5-THD)  
4. 4P-9613 [1] PLATE  
5. 6V-4248 M [1] BOLT (M10X1.5X25-MM)  
6. 8H-2807 [1] NUT (3/8-24-THD)  
7. 1L-3769 [1] RING-RETAINING  
8. 2J-0157 [1] SEAL-O-RING  
9. 8H-2778 [1] SEAL-RING  
10. 9M-2341 [1] FILTER ELEMENT-WTR SEP & FUEL (STANDARD EFFICIENCY)  
11. 7H-9678 [1] RETAINER-ELEMENT  
12. 2H-3429 [1] RING-RETAINING  
13. 7S-9323 [1] SPRING  
14. 8H-2810 [1] CASE AS-FILTER  
15. 9M-8406 [1] CLIP (LOOP)  
16. 5P-1442 E HOSE (103CM)  
17. 4P-7300 [1] BRACKET  
18. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
19. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
21. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
22. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
23. 8T-4133 M [2] NUT (M10X1.5-THD)  
24. 5P-4961 [2] CLAMP-HOSE  
25. 5P-1404 [1] ADAPTER  
26. 2M-9780 [1] SEAL-O-RING  
27. 5P-4924 [2] ELBOW  
28. 3J-1907 [2] SEAL-O-RING  
29. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
30. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
31. 2W-2605 [1] PUMP AS-FUEL PRIMING  
  7E-5346 [2] VALVE AS  
  1H-8171 [1] SEAL-O-RING  
32. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
33. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
34. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
35. 8N-8205 [1] BASE AS-FUEL FILTER  
  1W-3348 [1] BASE  
  1J-9671 [2] SEAL-O-RING  
  7E-5346 [1] VALVE AS  
  9S-8003 [1] PLUG (1/2-20-THD)  
36. 3K-0360 [1] SEAL-O-RING  
37. 5P-6944 [1] ADAPTER  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Seal Used In Governor Fastener Group
1990/01/01
New Fuel Return Valve Prevents Siphoning
1990/01/01
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect
1990/06/01
New Fuel Setting Screw Cover And Bolt
1990/07/01
New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups
1990/11/01
Fuel Injector Group Rack Movement
1992/05/01
4P6493 Governor Information Plate Available
1992/06/01
Governor Specifications Are Available Through The Technical Information System
1992/09/01
Replacement Governors For Early Engines
1992/10/01
Unit Injector Tip Seal Deterioration
1993/01/01
Measuring "Dynamic Rack" Of Unit Injectors
1993/06/01
New Fuel Injector Control Linkage
1993/08/01
New Control Assemblies Used In Fuel Injection Control Groups
1993/12/01
New O-Ring Seal Used On Unit Injector Tip{1290}
1995/11/20
Mechanical Unit Injector Identification Code {1290}
1995/12/20
Fuel Injector Sleeve Replacement Tooling{0703,1125}
1996/02/16
New Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/16
New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines{1264,1265}
1996/07/22
New Service Tool Calibration Pins For Mechanical Goverened Engines{1264,1265}
1996/07/22
Governor Shimming Is Determined By The Governor Test Bench Calibration{1264,1289}
1996/07/22
Replacing The Shutoff Assembly In Engines With Older Governors{1264,1289}
1996/07/22
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/22
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/23
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/04/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
New 173-1530 Injector Seating Tool Group Available{0710,1290}
1999/09/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/04/07
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/24
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/24
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Operation and Maintenance Manual
Fuel Injection Timing - Check
3114, 3116, and 3126 Industrial and Generator Set Engines
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Unit Injector
3114, 3116, 3126 Engines
Unit Injector Mechanism
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Information Release Memo
CATERPILLAR REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN MECHANICAL UNIT FUEL INJECTORS
CATERPILLAR REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN MECHANICAL UNIT FUEL INJECTORS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Unit Injector - Test
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Fuel Timing Dimension - Adjust
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Unit Injector - Adjust
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Unit Injector Synchronization - Adjust
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Troubleshooting
Unit Injector Cranking Rack Position
3114, 3116 and 3126 Engines
Unit Injector Misfire
3114, 3116 and 3126 Engines
Unit Injector
3114, 3116 and 3126 Engines
Disassembly and Assembly
Unit Injector - Remove
3114, 3116 and 3126 Engines
Unit Injector - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Procedure To Lessen Governor Control Lever Effort{1265}
1989/11/06
Use Correct Calibration Pin (1U9786) When Calibrating Governor; Do Not Use 1U7305 Insertion Tool{0706,0782,1264}
1989/11/06
New Fuel Return Valve Prevents Siphoning{1253,1274}
1989/12/25
New Seal Used In Governor Fastener Group{1264}
1990/01/29
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
New Fuel Setting Screw Cover And Bolt {1257}
1990/07/02
Setscrew And Nut Available For Fuel Setting And Injector Synchronization {1257}
1990/10/22
New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups{1208}
1990/11/05
Larger O-ring Seal Available For Oil Supply Port In Governor Housing{1264}
1991/05/13
Fuel Injector Group Rack Movement{1290}
1992/05/18
4P6493 Governor Information Plate Available{7557}
1992/06/15
Governor Specifications Are Available Through The Technical Information System{1264,0374}
1992/09/07
Replacement Governors For Early Engines{1264}
1992/11/09
Unit Injector Tip Seal Deterioration {1290}
1993/01/25
Measuring "Dynamic Rack" Of Unit Injectors{0780}
1993/06/21
New Fuel Injector Control Linkage{1298}
1993/08/30
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/09
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/04/07
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/24
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01

Caterpillar Parts SIS Catalog 3114 :

PUMP GP-FUEL INJECTION
7C-1500 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7C-1500 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7C-1500 PUMP GP-FUEL INJECTION
LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL
LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL
LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL
LINES GP-GOVERNOR OIL
7E-5621 LINES GP-GOVERNOR OIL
LINES GP-FUEL FILTER
7W-9854 LINES GP-FUEL FILTER
PUMP GP-FUEL INJECTION
7E-7607 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-7607 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-7607 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-7607 PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
7E-0786 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
7E-0786 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
8N-3365 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRM & PRIM FILTER
4P-7206 PUMP GP-FUEL PRM & PRIM FILTER

Truck sale:

CAT 3114
USD $5,878 
CAT 3114

DPX Power
 
 
CAT 3114

L & L Equipment Sales
La Vergne, Tennessee
 
 
CAT 3114

L & L Equipment Sales
La Vergne, Tennessee
CAT 3114
Call 
CAT 3114

L & L Equipment Sales
La Vergne, Tennessee
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.