AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3116 TRUCK ENGINE 7SF00450-00625 FUEL SYSTEM Caterpillar SIS



TRUCK ENGINE 3116 TRUCK ENGINE 7SF
 3116 TRUCK ENGINE 7SF00450-00625 SEBP1829 3116 7SF   (1989)

Parts group 3116:

  For full view, you need register
FUEL SYSTEM
CONTROL GP-FUEL INJECTION
CONTROL GP-FUEL INJECTION
7W-6989 CONTROL GP-FUEL INJECTION
7W6989 CONTROL GP-FUEL INJECTION
CONTROL GP-FUEL RATIO
LINES GP-FUEL RATIO CONTROL
9Y-3943 LINES GP-FUEL RATIO CONTROL
9Y3943 LINES GP-AIR FUEL RATIO CONTROL
CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
7C-5203 CONTROL GP-GOVERNOR
7C5203 CONTROL GP-GOVERNOR
PROVIDES A BROKEN LINK GOVERNOR CONTROL LEVER
FILTER GP-FUEL
FILTER GP-FUEL
1N-3476 FILTER GP-FUEL
1N3476 FILTER GP-FUEL
LINES GP-FUEL FILTER
7C-9651 LINES GP-FUEL FILTER
7C9651 LINES GP-FUEL FILTER
GOVERNOR GP
GOVERNOR GP-UNIT INJECTOR
9Y-2675 GOVERNOR GP-UNIT INJECTOR
9Y2675 GOVERNOR GP-UNIT INJECTOR
7C4567-PAGE 40
FOR USE WITH 165 HP
GOVERNOR GP-UNIT INJECTOR
9Y-7899 GOVERNOR GP-UNIT INJECTOR
9Y7899 GOVERNOR GP-UNIT INJECTOR
7E1673-PAGE 41.01
FOR USE WITH 185 HP
GOVERNOR GP-UNIT INJECTOR
7E-0001 GOVERNOR GP-UNIT INJECTOR
7E0001 GOVERNOR GP-UNIT INJECTOR
7E1673-PAGE 41.01
FOR USE WITH 250 HP
GOVERNOR GP-UNIT INJECTOR
7E-0002 GOVERNOR GP-UNIT INJECTOR
7E0002 GOVERNOR GP-UNIT INJECTOR
7E1673-PAGE 41.01
FOR USE WITH 215 HP
GOVERNOR GP-UNIT INJECTOR
7C-4567 GOVERNOR GP-UNIT INJECTOR
7C4567 GOVERNOR GP-UNIT INJECTOR
7W8179-PAGE 42
PART OF 9Y2675 GOVERNOR
GOVERNOR GP-UNIT INJECTOR
7E-1673 GOVERNOR GP-UNIT INJECTOR
7E1673 GOVERNOR GP-UNIT INJECTOR
7W8179-PAGE 42
PART OF 9Y7899, 7E0002, 7E0001 GOVERNORS
DRIVE GP-GOV & TRANSFER PUMP
7W-8179 DRIVE GP-GOV & TRANSFER PUMP
7W8179 GOVERNOR & TRANSFER PUMP DRIVE GP
PART OF 7C4567 & 7E1673 GOVERNORS
FASTENER GP-GOVERNOR
7W-4812 FASTENER GP-GOVERNOR
7W4812 FASTENER GP-GOVERNOR
LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL
7W8434 LINES GP-GOVERNOR OIL
LINES GP-FUEL
LINES GP-FUEL RATIO CONTROL
9Y-3943 LINES GP-FUEL RATIO CONTROL
9Y3943 LINES GP-AIR FUEL RATIO CONTROL
LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL
7W8434 LINES GP-GOVERNOR OIL
PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
9Y-6692 PUMP GP-FUEL INJECTION
9Y6692 PUMP GP-FUEL INJECTION-6 REQUIRED

Information:

(For parts list, see above)

Truck Engine News
New Control Assemblies Used In Fuel Injection Control Groups{1298}
1993/12/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Specifications
Fuel Ratio Control
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Disassembly and Assembly
Fuel Control Linkage
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Service Magazine
New Fuel Injector Control Linkage{1298}
1993/08/30
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17
Truck Engine News
Check The Fuel Injection Control Linkage For A Loose Rivet {1298}
2000/05/01
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage {1298}
Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage {1298}
Specifications
Fuel Injection Control Linkage
3116 Truck Engines
Troubleshooting
Fuel Injection Control Linkage
3114, 3116 and 3126 Engines
Unit Injector Cranking Rack Position
3114, 3116 and 3126 Engines
Disassembly and Assembly
Fuel Injection Control Linkage - Remove
3116 On Highway Engines
Fuel Injection Control Linkage - Install
3116 On Highway Engines
Service Magazine
Engine Rack Control Assemblies Improved {1257}
1990/07/02
New Fuel Injector Control Linkage{1298}
1993/08/30
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17
Truck Engine News
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Specifications
Fuel Ratio Control
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Testing and Adjusting
Fuel Ratio Control - Adjust
3116 Truck Engine
Troubleshooting
Fuel Ratio Control
3114, 3116 and 3126 Engines
Disassembly and Assembly
Governor And Fuel Transfer Pump
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Service Magazine
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Use Correct Calibration Pin (1U9786) When Calibrating Governor; Do Not Use 1U7305 Insertion Tool{0706,0782,1264}
1989/11/06
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17
Truck Engine News
Be Sure To Remove All Air From The Fuel System On A Truck That Has Run Out Of Fuel, Had The Fuel Filter Changed, Or Had The Governor Removed{1250,1256,1261,1264,1274}
1991/03/01
Be Sure To Use Correct Connector/Connectors Between Fuel Transfer Pump Outlet And Tube To Fuel Filter{1274,1256}
1992/02/01
New Fuel Priming Pump Kit Available
1993/01/01
New Fuel Priming Pump And Gasket Used{1258}
1994/09/01
Troubleshooting Reminder For Low Power Or Intermittent Low Power Symptoms {1250,1252,1256,1260,1261,1273}
1998/09/01
Engine News
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Operation and Maintenance Manual
Fuel System Primary Filter - Clean/Replace
3116 Truck Engine
Fuel System Secondary Filter - Replace
3116 Truck Engine
Fuel Inlet Screen - Clean/Inspect/Replace
3116 Truck Engine
Special Instruction
Installing The 1011534 And 1011536 Fuel Priming Pump Kits{1258}
Installing The 1011534 And 1011536 Fuel Priming Pump Kits{1258}
Service Letter-Australia
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
Service Letter-CFEL
Specifications
Fuel Filter Lines Group
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Fuel Filter Base
3116 Truck Engines
Fuel Filter and Water Separator
3116 Truck Engines
Fuel Filter (Primary)
3116 Truck Engines
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Letter-China
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Filter Base
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Fuel Priming Pump and Primary Fuel Filter - Remove and Install
3116 On Highway Engines
Fuel Filter Base - Remove and Install
3116 On Highway Engines
Service Magazine
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Do Not Prefill Secondary Fuel Filter {1261,1290}
1989/05/22
Preventive Maintenance (PM) Kits Available For 3116 Truck Engines{7258,0645,1261,1318,1352,7542}
1990/03/05
Be Sure To Remove All Air From The Fuel System On A Truck That Has Run Out Of Fuel, Had The Fuel Filter Changed, Or Had The Governor Removed{1250,1256,1261,1264,1274}
1991/02/18
Be Sure To Use Correct Connector/Connectors Between Fuel Transfer Pump Outlet And Tube To Fuel Filter{1274,1256}
1992/02/24
New Fuel Priming Pump Kit Available{1258}
1992/11/30
New Fuel Priming Pump Kits Available{1258}
1993/03/08
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Service Magazine
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Truck Engine News
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/23
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
New Shim Improves Low Idle Stability Of Governor
1990/11/01
Be Sure To Remove All Air From The Fuel System On A Truck That Has Run Out Of Fuel, Had The Fuel Filter Changed, Or Had The Governor Removed{1250,1256,1261,1264,1274}
1991/03/01
Larger O-ring Seal Available For Oil Supply Port In Governor Housing
1991/05/01
4P6493 Governor Information Plate Available
1992/06/01
Governor Specifications Are Available Through The Technical Information System
1992/09/01
Replacement Governors For Early Engines
1992/11/01
Measuring &quot;Dynamic Rack&quot; Of Unit Injectors
1993/06/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Governor Shimming Is Determined By The Governor Test Bench Calibration{1264,1289}
1996/07/30
Replacing The Shutoff Assembly In Engines With Older Governors{1264,1289}
1996/07/30
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/30
Engine News
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Operation and Maintenance Manual
Fuel Inlet Screen - Clean/Inspect/Replace
3116 Truck Engine
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE GOVERNORS ON CERTAIN 3116 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE GOVERNORS ON CERTAIN 3116 TRUCK ENGINES
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE GOVERNORS ON CERTAIN 3116 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE GOVERNORS ON CERTAIN 3116 TRUCK ENGINES
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Specifications
Governor
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Fuel Transfer Pump
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Governor
3116 Truck Engines
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Information Release Memo
REMANUFACTURED GOVERNORS FOR VARIOUS 3114 AND 3116 INDUSTRIAL, MACHINE, MARINE AND ON-HIGHWAY TRUCK APPLICATIONS
REMANUFACTURED GOVERNORS FOR VARIOUS 3114 AND 3116 INDUSTRIAL, MACHINE, MARINE AND ON-HIGHWAY TRUCK APPLICATIONS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Governor - Adjust
3116 Truck Engine
Troubleshooting
Governor Instability
3114, 3116 and 3126 Engines
Disassembly and Assembly
Governor And Fuel Transfer Pump
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Unit Fuel Injectors
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Governor - Install
3116 On Highway Engines
Governor - Remove
3116 On Highway Engines
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Use Correct Calibration Pin (1U9786) When Calibrating Governor; Do Not Use 1U7305 Insertion Tool{0706,0782,1264}
1989/11/06
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
Engine Rack Control Assemblies Improved {1257}
1990/07/02
New Fuel Setting Screw Cover And Bolt {1257}
1990/07/02
Setscrew And Nut Available For Fuel Setting And Injector Synchronization {1257}
1990/10/22
New Shim Improves Low Idle Stability Of Governor{1265,1256}
1990/11/26
Be Sure To Remove All Air From The Fuel System On A Truck That Has Run Out Of Fuel, Had The Fuel Filter Changed, Or Had The Governor Removed{1250,1256,1261,1264,1274}
1991/02/18
Larger O-ring Seal Available For Oil Supply Port In Governor Housing{1264}
1991/05/13
Be Sure To Use Correct Connector/Connectors Between Fuel Transfer Pump Outlet And Tube To Fuel Filter{1274,1256}
1992/02/24
4P6493 Governor Information Plate Available{7557}
1992/06/15
Governor Specifications Are Available Through The Technical Information System{1264,0374}
1992/09/07
Replacement Governors For Early Engines{1264}
1992/11/09
Measuring &quot;Dynamic Rack&quot; Of Unit Injectors{0780}
1993/06/21
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17
Specifications
Fuel Heater and Water Separator
3116 Truck Engines
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Disassembly and Assembly
Ether Starting Aid
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Service Magazine
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Truck Engine News
Do Not Use A Wire Brush On Fuel Nozzles
1982/09/29
New Fuel Nozzle Test Sheet Available
1982/10/27
Bulged Capsule-type Fuel Nozzles
1982/10/27
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/08
Bleed Screw Washer (seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect
1990/05/01
Be Sure To Remove All Air From The Fuel System On A Truck That Has Run Out Of Fuel, Had The Fuel Filter Changed, Or Had The Governor Removed{1250,1256,1261,1264,1274}
1991/03/01
Be Sure To Use Correct Connector/Connectors Between Fuel Transfer Pump Outlet And Tube To Fuel Filter{1274,1256}
1992/02/01
Fuel Injector Group Rack Movement
1992/05/01
Unit Injector Tip Seal Deterioration
1993/01/01
Shutoff Valve In Fuel Return Lines{1274,1279}
1995/10/01
New O-Ring Seal Used On Unit Injector Tip{1290}
1995/11/28
Mechanical Unit Injector Identification Code {1290}
1995/12/15
Fuel Injector Sleeve Replacement Tooling{0703,1125}
1996/02/26
New Engine Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/26
Mechanical Unit Fuel Injector Groups Spill Shield Changed{1290}
1997/06/23
Engine News
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line
1978/07/05
Operation and Maintenance Manual
Standard Torque for Worm Drive Band Hose Clamps
3116 Truck Engine
Fuel Inlet Screen - Clean/Inspect/Replace
3116 Truck Engine
Special Instruction
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-CFEL
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Fuel Filter Lines Group
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Fuel Injector
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Fuel Injector Rocker Arms And Lifters
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Standard Torque for Worm Drive Band Hose Clamps
3116 Truck Engine
Fuel Filter Lines
3116 Truck Engines
Fuel Lines
3116 Truck Engines
Service Letter-China
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-APD
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Disassembly and Assembly
Fuel Filter Base
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Unit Fuel Injectors
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Do Not Prefill Secondary Fuel Filter {1261,1290}
1989/05/22
New Fuel Return Valve Prevents Siphoning{1253,1274}
1989/12/25
Preventive Maintenance (PM) Kits Available For 3116 Truck Engines{7258,0645,1261,1318,1352,7542}
1990/03/05
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
Be Sure To Remove All Air From The Fuel System On A Truck That Has Run Out Of Fuel, Had The Fuel Filter Changed, Or Had The Governor Removed{1250,1256,1261,1264,1274}
1991/02/18
1P8116 O-Ring Seal Available To Service Unit Injectors{1290}
1992/02/24
Fuel Injector Group Rack Movement{1290}
1992/05/18
Unit Injector Tip Seal Deterioration {1290}
1993/01/25
Measuring &quot;Dynamic Rack&quot; Of Unit Injectors{0780}
1993/06/21
New Fuel Injector Control Linkage{1298}
1993/08/30
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
Truck Engine News
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect
1990/05/01
1P8116 O-Ring Seal Available To Service Unit Injectors{1290}
1992/02/01
Fuel Injector Group Rack Movement
1992/05/01
Unit Injector Tip Seal Deterioration
1993/01/01
Measuring &quot;Dynamic Rack&quot; Of Unit Injectors
1993/06/01
New O-Ring Seal Used On Unit Injector Tip{1290}
1995/11/28
Mechanical Unit Injector Identification Code {1290}
1995/12/15
Fuel Injector Sleeve Replacement Tooling{0703,1125}
1996/02/26
New Engine Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/26
Mechanical Unit Fuel Injector Groups Spill Shield Changed{1290}
1997/06/23
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/01
New 173-1530 Injector Seating Tool Group Available{0710,1290}
1999/09/01
Operation and Maintenance Manual
Fuel Inlet Screen - Clean/Inspect/Replace
3116 Truck Engine
Special Instruction
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Installing Injectors on the 3116, 3116T, and 3126 Industrial Engines{1290}
Installing Injectors on the 3116, 3116T, and 3126 Industrial Engines{1290}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Fuel Injector
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Fuel Injector Rocker Arms And Lifters
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Tool Operating Manual
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Disassembly and Assembly
Unit Fuel Injectors
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
1P8116 O-Ring Seal Available To Service Unit Injectors{1290}
1992/02/24
Fuel Injector Group Rack Movement{1290}
1992/05/18
Unit Injector Tip Seal Deterioration {1290}
1993/01/25
Measuring &quot;Dynamic Rack&quot; Of Unit Injectors{0780}
1993/06/21
New Fuel Injector Control Linkage{1298}
1993/08/30
128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}
1997/01/27
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Truck Engine News
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Disassembly and Assembly
Governor And Fuel Transfer Pump
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Service Magazine
Use Correct Calibration Pin (1U9786) When Calibrating Governor; Do Not Use 1U7305 Insertion Tool{0706,0782,1264}
1989/11/06
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Truck Engine News
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems
1982/09/01
Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/27
New Fuel Nozzle Test Sheet Available
1982/10/27
Bulged Capsule-type Fuel Nozzles
1982/10/27
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/08
Fuel Sulfur Analyzer Available
1986/01/01
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers
1986/03/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Bleed Screw Washer (seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
New Engine Timing Indicator Group Available
1986/07/01
Changes Have Been Made To 0T Microfiche (Fuel Setting And Related Information)
1986/07/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals
1986/11/01
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect
1990/05/01
New Shim Improves Low Idle Stability Of Governor
1990/11/01
Be Sure To Remove All Air From The Fuel System On A Truck That Has Run Out Of Fuel, Had The Fuel Filter Changed, Or Had The Governor Removed{1250,1256,1261,1264,1274}
1991/03/01
Larger O-ring Seal Available For Oil Supply Port In Governor Housing
1991/05/01
1P8116 O-Ring Seal Available To Service Unit Injectors{1290}
1992/02/01
Be Sure To Use Correct Connector/Connectors Between Fuel Transfer Pump Outlet And Tube To Fuel Filter{1274,1256}
1992/02/01
Fuel Injector Group Rack Movement
1992/05/01
4P6493 Governor Information Plate Available
1992/06/01
Governor Specifications Are Available Through The Technical Information System
1992/09/01
New Fuel Priming Pump Kit Available
1993/01/01
Unit Injector Tip Seal Deterioration
1993/01/01
Measuring &quot;Dynamic Rack&quot; Of Unit Injectors
1993/06/01
New Fuel Priming Pump And Gasket Used{1258}
1994/09/01
New &quot;Fuel System Reuse And Salvage Guides&quot; Reference Manual Available{1250}
1997/04/01
Lubricity Limit Added To Preferred Distillate Fuel Recommendation{1280}
1997/08/01
Engine News
Fuel Heaters Are Now Available For Field Installation
1980/01/09
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Operation and Maintenance Manual
Hoses and Clamps - Inspect/Replace
3116 Truck Engine
Fuel System - Prime
3116 Truck Engine
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Letter-Australia
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
Service Letter-CFEL
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Fuel Priming Pump Used{1258}
1987/04/20
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Fuel Return Valve Prevents Siphoning{1253,1274}
1989/12/25
Preventive Maintenance (PM) Kits Available For 3116 Truck Engines{7258,0645,1261,1318,1352,7542}
1990/03/05
Setscrew And Nut Available For Fuel Setting And Injector Synchronization {1257}
1990/10/22
New Shim Improves Low Idle Stability Of Governor{1265,1256}
1990/11/26
Be Sure To Remove All Air From The Fuel System On A Truck That Has Run Out Of Fuel, Had The Fuel Filter Changed, Or Had The Governor Removed{1250,1256,1261,1264,1274}
1991/02/18
Larger O-ring Seal Available For Oil Supply Port In Governor Housing{1264}
1991/05/13
1P8116 O-Ring Seal Available To Service Unit Injectors{1290}
1992/02/24
Be Sure To Use Correct Connector/Connectors Between Fuel Transfer Pump Outlet And Tube To Fuel Filter{1274,1256}
1992/02/24
Fuel Injector Group Rack Movement{1290}
1992/05/18
Governor Specifications Are Available Through The Technical Information System{1264,0374}
1992/09/07
Replacement Governors For Early Engines{1264}
1992/11/09
Measuring &quot;Dynamic Rack&quot; Of Unit Injectors{0780}
1993/06/21
New Fuel Injector Control Linkage{1298}
1993/08/30
Special Instruction
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
1P8116 O-Ring Seal Available To Service Unit Injectors{1290}
1992/02/24
Fuel Injector Group Rack Movement{1290}
1992/05/18
Unit Injector Tip Seal Deterioration {1290}
1993/01/25
Measuring &quot;Dynamic Rack&quot; Of Unit Injectors{0780}
1993/06/21
New Fuel Injector Control Linkage{1298}
1993/08/30
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
Truck Engine News
Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/05/01
Special Instruction
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Tool Operating Manual
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Service Magazine
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
Truck Engine News
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Do Not Use A Wire Brush On Fuel Nozzles
1982/09/29
New Fuel Nozzle Test Sheet Available
1982/10/27
Bulged Capsule-type Fuel Nozzles
1982/10/27
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/08
New 8T2998 Lubricant Available
1986/02/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Bleed Screw Washer (seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect
1990/05/01
New Shim Improves Low Idle Stability Of Governor
1990/11/01
New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups
1990/11/01
Be Sure To Remove All Air From The Fuel System On A Truck That Has Run Out Of Fuel, Had The Fuel Filter Changed, Or Had The Governor Removed{1250,1256,1261,1264,1274}
1991/03/01
Larger O-ring Seal Available For Oil Supply Port In Governor Housing
1991/05/01
1P8116 O-Ring Seal Available To Service Unit Injectors{1290}
1992/02/01
Fuel Injector Group Rack Movement
1992/05/01
4P6493 Governor Information Plate Available
1992/06/01
Governor Specifications Are Available Through The Technical Information System
1992/09/01
Replacement Governors For Early Engines
1992/11/01
Unit Injector Tip Seal Deterioration
1993/01/01
Measuring &quot;Dynamic Rack&quot; Of Unit Injectors
1993/06/01
New O-Ring Seal Used On Unit Injector Tip{1290}
1995/11/28
Mechanical Unit Injector Identification Code {1290}
1995/12/15
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Fuel Injector Sleeve Replacement Tooling{0703,1125}
1996/02/26
New Engine Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/26
Governor Shimming Is Determined By The Governor Test Bench Calibration{1264,1289}
1996/07/30
Replacing The Shutoff Assembly In Engines With Older Governors{1264,1289}
1996/07/30
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/30
Mechanical Unit Fuel Injector Groups Spill Shield Changed{1290}
1997/06/23
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/01
New 173-1530 Injector Seating Tool Group Available{0710,1290}
1999/09/01
Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/05/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/01
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/01
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/01
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/01
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Injectors Should Not Be Tested for Proper Operation Prior to Being Installed Into the Engine {1251, 1290}
2009/03/01
Engine News
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Troubleshooting Engines with Mechanical Unit Injection (MUI) {1000, 1254}
2006/01/02
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Operation and Maintenance Manual
Fuel Injection Timing - Check
3116 Truck Engine
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Installing Injectors on the 3116, 3116T, and 3126 Industrial Engines{1290}
Installing Injectors on the 3116, 3116T, and 3126 Industrial Engines{1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Governor
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Fuel Injector
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Fuel Transfer Pump
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Fuel Injector Rocker Arms And Lifters
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Unit Injector
3116 Truck Engines
Unit Injector Mechanism
3116 Truck Engines
Tool Operating Manual
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Information Release Memo
CATERPILLAR REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN MECHANICAL UNIT FUEL INJECTORS
CATERPILLAR REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN MECHANICAL UNIT FUEL INJECTORS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Fuel Timing Dimension - Adjust
3116 Truck Engine
Unit Injector - Adjust
3116 Truck Engine
Unit Injector Synchronization - Adjust
3116 Truck Engine
Troubleshooting
Unit Injector Cranking Rack Position
3114, 3116 and 3126 Engines
Unit Injector Misfire
3114, 3116 and 3126 Engines
Unit Injector
3114, 3116 and 3126 Engines
Disassembly and Assembly
Governor And Fuel Transfer Pump
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Ether Starting Aid
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Rocker Arm Assemblies
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Unit Fuel Injectors
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Unit Injector - Remove
3116 On Highway Engines
Unit Injector - Install
3116 On Highway Engines
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Use Correct Calibration Pin (1U9786) When Calibrating Governor; Do Not Use 1U7305 Insertion Tool{0706,0782,1264}
1989/11/06
New Fuel Return Valve Prevents Siphoning{1253,1274}
1989/12/25
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
New Fuel Setting Screw Cover And Bolt {1257}
1990/07/02
Setscrew And Nut Available For Fuel Setting And Injector Synchronization {1257}
1990/10/22
New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups{1208}
1990/11/05
New Shim Improves Low Idle Stability Of Governor{1265,1256}
1990/11/26
Be Sure To Remove All Air From The Fuel System On A Truck That Has Run Out Of Fuel, Had The Fuel Filter Changed, Or Had The Governor Removed{1250,1256,1261,1264,1274}
1991/02/18
Larger O-ring Seal Available For Oil Supply Port In Governor Housing{1264}
1991/05/13
1P8116 O-Ring Seal Available To Service Unit Injectors{1290}
1992/02/24
Be Sure To Use Correct Connector/Connectors Between Fuel Transfer Pump Outlet And Tube To Fuel Filter{1274,1256}
1992/02/24
Fuel Injector Group Rack Movement{1290}
1992/05/18
4P6493 Governor Information Plate Available{7557}
1992/06/15
Governor Specifications Are Available Through The Technical Information System{1264,0374}
1992/09/07
Replacement Governors For Early Engines{1264}
1992/11/09
Unit Injector Tip Seal Deterioration {1290}
1993/01/25
Measuring &quot;Dynamic Rack&quot; Of Unit Injectors{0780}
1993/06/21
New Fuel Injector Control Linkage{1298}
1993/08/30
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17
128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}
1997/01/27
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
Pull the Injector Sleeve with a 139-0692 Sleeve Jaw {0706, 1713}
2000/04/17
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/24
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/08
Truck Engine News
New Fuel Priming Pump Kit Available
1993/01/01
New Fuel Priming Pump Kits Available
1993/03/01
New Fuel Priming Pump And Gasket Used{1258}
1994/09/01
Operation and Maintenance Manual
Fuel System - Prime
3116 Truck Engine
Special Instruction
Installing The 1011534 And 1011536 Fuel Priming Pump Kits{1258}
Installing The 1011534 And 1011536 Fuel Priming Pump Kits{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Service Letter-Australia
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
Service Letter-CFEL
Service Letter-China
Service Letter-Asia
Service Letter-APD
Testing and Adjusting
Fuel System - Prime
3116 Truck Engine
Disassembly and Assembly
Fuel Priming Pump and Primary Fuel Filter - Remove and Install
3116 On Highway Engines
Service Magazine
Improved Fuel Priming Pump Used{1258}
1987/04/20
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Do Not Prefill Secondary Fuel Filter {1261,1290}
1989/05/22
New Fuel Priming Pump Kit Available{1258}
1992/11/30
New Fuel Priming Pump Kits Available{1258}
1993/03/08
Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
2004/03/29
Truck Engine News
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
New Shim Improves Low Idle Stability Of Governor
1990/11/01
Be Sure To Remove All Air From The Fuel System On A Truck That Has Run Out Of Fuel, Had The Fuel Filter Changed, Or Had The Governor Removed{1250,1256,1261,1264,1274}
1991/03/01
Larger O-ring Seal Available For Oil Supply Port In Governor Housing
1991/05/01
Be Sure To Use Correct Connector/Connectors Between Fuel Transfer Pump Outlet And Tube To Fuel Filter{1274,1256}
1992/02/01
4P6493 Governor Information Plate Available
1992/06/01
Governor Specifications Are Available Through The Technical Information System
1992/09/01
Replacement Governors For Early Engines
1992/11/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Governor Shimming Is Determined By The Governor Test Bench Calibration{1264,1289}
1996/07/30
Replacing The Shutoff Assembly In Engines With Older Governors{1264,1289}
1996/07/30
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/30
Engine News
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Operation and Maintenance Manual
Fuel Inlet Screen - Clean/Inspect/Replace
3116 Truck Engine
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Specifications
Governor
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Fuel Transfer Pump
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Fuel Transfer Pump
3116 Truck Engines
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Testing and Adjusting
Fuel System Pressure - Test
3116 Truck Engine
Troubleshooting
Fuel Transfer Pump
3114, 3116 and 3126 Engines
Disassembly and Assembly
Governor And Fuel Transfer Pump
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Unit Fuel Injectors
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Fuel Transfer Pump - Remove and Install
3116 On Highway Engines
Service Magazine
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Fuel Priming Pump Used{1258}
1987/04/20
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Use Correct Calibration Pin (1U9786) When Calibrating Governor; Do Not Use 1U7305 Insertion Tool{0706,0782,1264}
1989/11/06
New Shim Improves Low Idle Stability Of Governor{1265,1256}
1990/11/26
Be Sure To Remove All Air From The Fuel System On A Truck That Has Run Out Of Fuel, Had The Fuel Filter Changed, Or Had The Governor Removed{1250,1256,1261,1264,1274}
1991/02/18
Larger O-ring Seal Available For Oil Supply Port In Governor Housing{1264}
1991/05/13
Be Sure To Use Correct Connector/Connectors Between Fuel Transfer Pump Outlet And Tube To Fuel Filter{1274,1256}
1992/02/24
4P6493 Governor Information Plate Available{7557}
1992/06/15
Governor Specifications Are Available Through The Technical Information System{1264,0374}
1992/09/07
Replacement Governors For Early Engines{1264}
1992/11/09
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Service Magazine
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Engine Rack Control Assemblies Improved {1257}
1990/07/02
New Fuel Setting Screw Cover And Bolt {1257}
1990/07/02
Setscrew And Nut Available For Fuel Setting And Injector Synchronization {1257}
1990/10/22
Operation and Maintenance Manual
Fuel System Water Separator - Drain
3116 Truck Engine
Fuel Tank Water and Sediment - Drain
3116 Truck Engine
Specifications
Fuel Filter and Water Separator
3116 Truck Engines
Fuel Heater and Water Separator
3116 Truck Engines
Service Magazine
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Engine News
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Specifications
Fuel Shutoff Solenoid
3116 Truck Engines
Testing and Adjusting
Fuel Shutoff Solenoid - Test
3116 Truck Engine
Disassembly and Assembly
Fuel Shutoff Solenoid - Remove and Install
3116 On Highway Engines
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Operation and Maintenance Manual
Fuel Tank Water and Sediment - Drain
3116 Truck Engine
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Truck Engine News
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/27
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/08
Fuel Sulfur Analyzer Available
1986/01/01
New Engine Timing Indicator Group Available
1986/07/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Fuel Injector Sleeve Replacement Tooling{0703,1125}
1996/02/26
New 173-1530 Injector Seating Tool Group Available{0710,1290}
1999/09/01
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Using The 5P-4150 Nozzle Testing Group{0782}
Using The 5P-4150 Nozzle Testing Group{0782}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4950 Injection Line Speed Pickup Group{0782}
Using The 6V4950 Injection Line Speed Pickup Group{0782}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Using 8S2305, 9S228, And 6V9128 Rack Position Tool Groups{0782, 1250}
Using 8S2305, 9S228, And 6V9128 Rack Position Tool Groups{0782, 1250}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Fabricated Extension Prevents Fuel &quot;Splash&quot; During Injection Valve Testing{0650,1254}
1977/10/17
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
5P4149 Conversion Group To Become A Discontinued Item On October 1, 1978{0650,1254}
1978/03/27
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New 5P8744 Adapter Assembly And Special Instruction Procedures For 5P4150 Nozzle Tester Group{0650}
1978/08/28
4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}
1978/10/09
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
6V183 Gasket Now Available For Parts Service To Use On 5P4150 Or 8S2242 Nozzle Tester{0651}
1979/06/25
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Use Correct Calibration Pin (1U9786) When Calibrating Governor; Do Not Use 1U7305 Insertion Tool{0706,0782,1264}
1989/11/06
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
Modification Of 1U7791 Valve Seat Driver{0782,1103}
1990/10/29
Cylinder Head Stress Plate Used During Cylinder Bore Honing And Measurement {1223}
1997/01/27
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
Pull the Injector Sleeve with a 139-0692 Sleeve Jaw {0706, 1713}
2000/04/17
170-9227 Shims Will Control Injector Sleeve Reaming {0700, 0703, 0706, 1000}
2000/09/11
Special Instruction
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Disassembly and Assembly
Fuel Control Linkage
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Service Magazine
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Engine Rack Control Assemblies Improved {1257}
1990/07/02
New Fuel Setting Screw Cover And Bolt {1257}
1990/07/02
Setscrew And Nut Available For Fuel Setting And Injector Synchronization {1257}
1990/10/22
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QU&#201;BEC, Quebec, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.