4W-1979 SHUTOFF GP-MECHANICAL S/N 90U19731-UP CANNOT BE USED WITH TMSN OIL COOLER OR SOLENOID SHUT-OFF AN ATTACHMENT 3406

FUEL SYSTEM

SHUTOFF GP

0. 4W-1979 SHUTOFF GP

ENCLOSURES, GUARDS AND BASES

BASE GP

1. 5N-2016 TANK & BAS

FUEL SYSTEM

TORQUE CONTROL GP

2. 4N-4267 TORQUE CON

PUMP GP-FUEL INJECTION

3. 2W-0336 VALVE GP-F

ELECTRICAL AND STARTING SYSTEM

ALTERNATOR GP-CHARGING

4. 266-7227 ALTERNATOR
5. 2P-1204 ALTERNATOR
6. 2P-1204 ALTERNATOR
7. 331-5717 ALTERNATOR
8. 3E-7892 ALTERNATOR
9. 3T-6352 ALTERNATOR
0. INFORMATION

INDUSTRIAL ENGINE 3406 INDUSTRIAL ENGINE 90U
3406 Industrial Engine 90U19731-UP SEBP1833 3406 90U (1973)

FUEL SYSTEM

SHUTOFF GP

2W-6257 SHUTOFF GP-MANUAL

3N-7742 SHUTOFF GP-MANUAL

4W-1979 SHUTOFF GP-MECHANICAL

#SEBP18330420

4W-1979: SHUTOFF GP-MECHANICAL

SHUTOFF GP-MECHANICAL

4W-1979 SHUTOFF GP-MECHANICAL
S/N 90U19731-UP
CANNOT BE USED WITH TMSN OIL COOLER OR SOLENOID SHUT-OFF
AN ATTACHMENT

i00378331 SEBP1833

4W1979 SHUTOFF GP-MECHANICAL Parts scheme

For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6L-9781 C	[2]	CONNECTOR
2.	5P-4592 C	[1]	ELBOW-FLARED
3.	101-5726 C	[1]	VALVE (ENGINE OIL TEMPERATURE SENSING)
4.	4W-8223 C	[1]	TUBE AS
5.	4W-8222 C	[1]	TUBE AS
6.	4W-8221 C	[1]	TUBE AS
7.	2W-7704 C	[1]	CLAMP
	5S-7349 C	[1]	BOLT (1/4-20X0.5-IN)
	7X-0586 C	[1]	WASHER-HARD (7.2X32X2-MM THK)
8.	4W-8726 C	[1]	BRACKET
9.	7K-4129	[4]	UNION-FLARED
10.	4W-1976	[2]	TUBE AS
11.	6V-3265 C	[2]	CLIP
12.	8T-4224 C	[11]	WASHER-HARD (8.8X16X2-MM THK)
13.	1L-5081 C	[3]	SPACER (0.41X0.75X0.56-IN THK)
14.	4L-9337 C	[1]	BOLT (3/8-16X1.5-IN)
15.	8T-4896 C	[3]	WASHER-HARD (10.2X18.5X2.5-MM THK)
16.	6K-9194 C	[2]	ELBOW
17.	7K-4128	[1]	TEE-FLARED
18.	032-1267	[1]	CONNECTOR (STRAIGHT)
19.	101-5720 C	[1]	VALVE (ENGINE OIL PRESSURE SENSING)
20.	032-1268	[5]	CONNECTOR (90-DEG)
21.	2L-6457	[1]	COVER
	8M-5521	[1]	GASKET
22.	4W-1972	[1]	TUBE AS
23.	4W-8224 C	[1]	TUBE AS
24.	5P-2645	[1]	ELBOW
	3J-7354	[1]	SEAL-O-RING
25.	5N-9552	[1]	CYLINDER
	2W-5447	[1]	GASKET
26.	3N-7391	[1]	FLANGE
27.	4W-1970	[1]	TUBE AS
28.	6V-8185	[2]	NUT (1/4-20-THD)
29.	4K-7240	[1]	U-BOLT
30.	2P-4439	[1]	ADAPTER
31.	4W-1973	[1]	TUBE AS
32.	4W-1975	[1]	TUBE AS
33.	3P-1823	[1]	ADAPTER-PIPE
34.	2B-2694 C	[1]	BOLT (5/16-18X2-IN)
35.	8T-2502 C	[1]	BOLT (3/8-16X1.125-IN)
36.	5M-5689 C	[10]	CLAMP
	6V-8189	[5]	NUT (5/16-18-THD)
	6V-5782	[5]	BOLT (5/16-18X1.125-IN)
37.	8T-4205 C	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
38.	7C-0307	[1]	GASKET
	C		CHANGE FROM PREVIOUS TYPE

#SEBP18330421

5N-2016: TANK & BASE GP-FUEL

TANK & BASE GP-FUEL

5N-2016 TANK & BASE GP-FUEL
S/N 90U19731-UP
FOR USE WITH PACKAGED GENERATOR SET, BATTERY RACK
CANNOT BE USED WITH WITH ENCLOSURE OR
AN ATTACHMENT

i00384557 SEBP1833

For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5N-2019	[1]	TANK & BASE AS-FUEL
	1B-5170	[1]	PLUG-PIPE
2.	7B-9665	[1]	PLUG
3.	1D-4709	[4]	BOLT (1-8X3-IN)
	1B-4333	[4]	NUT (1-8-THD)
	3K-5234	[8]	WASHER-HARD (28X49X6-MM THK)
4.	1D-4625	[4]	BOLT (7/8-9X2.5-IN)
	1B-4332	[4]	NUT-FULL (7/8-9-THD)
	9H-1031	[8]	WASHER-HARD (24X41.5X6-MM THK)
5.	4B-5441	[1]	CAP AS-FILLER
6.	4B-5949	[2]	FILTER ELEMENT-FUEL (FUEL CAP)
7.	4B-5423	[1]	GASKET
8.	2A-1763	[1]	GASKET-CAP
9.	3F-4134	[1]	BAFFLE (FUEL TANK FILL CAP)
10.	7B-2002	[1]	WASHER (10.2X44.5X3-MM THK)
11.	3H-8389	[1]	SCREW-FILLER CAP
12.	5N-5175	[1]	PLUNGER
13.	5L-3638 B	[6]	SHIM (0.03-IN THK)
	B		USE AS REQUIRED

#SEBP18330422

4N-4267: TORQUE CONTROL GP

TORQUE CONTROL GP

4N-4267 TORQUE CONTROL GP
S/N 90U19731-UP
PART OF 4N-4145, 8N-4396, 8N-8965, 8N-8966 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT

i00147616 SEBP1833

For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1P-6452	[1]	INSULATOR
2.	1P-9958	[1]	INSULATOR
3.	2S-7391	[1]	BAR-STOP
4.	3S-0602	[1]	RETAINER-SPRING
5.	4N-4218	[1]	CONTACT
6.	8M-9062	[1]	RETAINER-SPRING (3.05-MM THK)
7.	9L-7235 B	[1]	SHIM (0.040-IN THK)
8.	6L-5897	[2]	BOLT (1/4-20X0.875-IN)
	B		USE AS REQUIRED

#SEBP18330423

2W-0336: VALVE GP-FUEL INJECTION

VALVE GP-FUEL INJECTION

2W-0336 VALVE GP-FUEL INJECTION
S/N 90U19731-UP
FOR USE WITH @@@@@ 1N-3138@@@@@, @@@@@ 8N-4396@@@@@
AN ATTACHMENT

i00357315 SEBP1833

2W0336 VALVE GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	9N-3246	[6]	NOZZLE AS-FUEL VALVE

#SEBP18330424

266-7227: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

266-7227 ALTERNATOR GP-CHARGING
S/N 90U19731-UP
24-VOLT, 60-AMPERE
FIELD REPLACEMENT FOR @@@@@ 4N-3986@@@@@

i02788059 SEBP1833

2667227 ALTERNATOR GP-CHARGING Parts scheme

For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
2.	1H-3244	[1]	LOCKWASHER
3.	6V-8187	[1]	NUT (1/4-28-THD)
4.	292-3815	[2]	KIT-TERMINAL
5.	9L-6770	[1]	CAP-DUST
6.	5P-3418	[1]	BEARING-ROLLER
7.	5P-3419	[1]	RACE-BEARING INNER
8.	291-8247	[1]	RECTIFIER AS
9.	202-2708	[1]	DIODE AS
10.	3T-6354	[1]	REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR)
11.	291-8253	[1]	CAPACITOR AS
12.	202-9897	[1]	BEARING-SPECIAL BALL
13.	100-6531	[1]	FAN-ALTERNATOR (11-BLADE)
14.	187-2034	[1]	NUT-FLANGE (5/8-18-THD)
15.	291-8274	[1]	PLATE
16.	291-8271	[1]	HOUSING AS
17.	202-2700	[1]	FRAME
18.	291-8263	[1]	STATOR AS
19.	6N-1945	[1]	COIL AS-FIELD
20.	9S-2390	[1]	RETAINER
21.	9S-2302	[1]	ROTOR AS
22.	4B-2047	[1]	NUT (10-24-THD)
23.	8T-0328	[1]	WASHER-HARD (5.5X10X1-MM THK)
24.	8F-1434	[1]	LOCKWASHER
25.	202-2784	[1]	KIT-ALTERNATOR TERMINAL (OUTPUT)
			(KIT INCLUDES NUT, WASHERS, INSULATORS, CONNECTORS, ADAPTER, & SCREW)
26.	202-2785	[1]	KIT-ALTERNATOR TERMINAL (RELAY)
			(KIT INCLUDES STUD, BUSHINGS, CONNECTOR, & NUT)
27.	202-2786	[1]	KIT-ALTERNATOR TERMINAL (INDICATOR LIGHT)
			(KIT INCLUDES NUTS, WASHERS, BUSHINGS, & CONNECTOR)

	202-2787 F	[1]	KIT-HARDWARE (ALTERNATOR AIR)
			(KIT INCLUDES NUTS, SCREWS, WASHER, BOOT, COLLAR, & CONNECTOR)
	F		NOT SHOWN

#SEBP18330425

2P-1204: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

2P-1204 ALTERNATOR GP-CHARGING
S/N 90U19731-UP
24 VOLT,19 AMPERE
PART OF 5N-4804 ALTERNATOR GP-CHARGING
Type 1
FOR USE WITH FIRE PUMP ENGINES
AN ATTACHMENT

i00355710 SEBP1833

2P1204 ALTERNATOR GP-CHARGING Parts scheme

For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	031-0243	[3]	SCREW (1/4-20X0.625-IN)
2.	6N-3821 CJ	[1]	REGULATOR AS
3.	009-8708	[2]	BOOT-TERMINAL
4.	2L-8076	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
5.	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
6.	1P-1091	[1]	KIT-REGULATOR
7.	1P-1145	[1]	HOLDER AS-BRUSH
	1P-1137	[1]	HOLDER-BRUSH
8.	4B-2049	[4]	NUT (10-32-THD)
	3B-4502	[4]	LOCKWASHER
9.	1P-1138	[1]	TERMINAL AS
10.	5S-4245	[2]	SCREW-MACHINE (4-40X0.5-IN)
	6B-4542	[2]	LOCKWASHER
11.	4B-4274	[1]	WASHER (5.5X13X1.2-MM THK)
12.	1P-1130	[1]	KIT-BRUSH (2 BRUSHES)
13.	032-4000	[4]	SCREW (6-32X0.5-IN)
14.	2P-1714	[1]	KIT-GASKET (4 GASKETS)
15.	1P-1080	[1]	KIT-RETAINER & SEAL
16.	6N-6717 C	[1]	KIT-INSULATOR (-TERM STUD)
17.	2P-1709	[1]	RECTIFIER AS
18.	2P-1719	[1]	RECTIFIER AS (+)
	2P-1720	[1]	RECTIFIER AS (-)
19.	6N-1226 C	[1]	ROTOR AS
20.	1B-8705	[1]	KEY-WOODRUFF
21.	3B-4502	[10]	LOCKWASHER
22.	6N-5255 C	[1]	HEAD AS
23.	6D-9953	[2]	PIN-SPRING
24.	1B-5387 C	[1]	BALL BEARING
25.	2P-1713	[1]	KIT-RETAINER & SEAL
26.	017-2311	[3]	SCREW
27.	9M-5520	[1]	SCREW-TAPPING (10-24X0.5-IN)
28.	3B-4511	[1]	LOCKWASHER
29.	1P-1131	[1]	KIT-SHAFT PARTS (NUT & LOCKWASHER)
30.	2L-0611	[1]	BEARING AS-NEEDLE
31.	1P-1134	[1]	RACE-BEARING INNER
32.	6N-5257 C	[1]	KIT-FRAME SCREW (12 BOLTS)
33.	6N-5254 C	[1]	HEAD AS
34.	3B-4507	[2]	LOCKWASHER (1CM .43IN ID)
	3B-4504	[2]	LOCKWASHER
35.	1D-4718	[2]	NUT-FULL (7/16-14-THD)
	9M-1311	[2]	NUT-JAM (1/4-28-THD)
36.	2H-6139	[4]	LOCKWASHER
37.	1P-1088	[1]	KIT-BRUSH & SPRING (2 BRUSH SPRINGS)
38.	2P-6261 C	[2]	INSULATOR
39.	7N-1806 C	[1]	BUSHING-TERMINAL
	2P-1698 J	[1]	ALTERNATOR AS-CHARGING
			(INCLUDES ALL PARTS EXCEPT THOSE MARKED J)
	C		CHANGE FROM PREVIOUS TYPE
	J

#SEBP18330426

2P-1204: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

2P-1204 ALTERNATOR GP-CHARGING
S/N 90U19731-UP
24 VOLT,19 AMPERE
PART OF 5N-4804 ALTERNATOR GP-CHARGING
Type 2
FOR USE WITH FIRE PUMP ENGINES
AN ATTACHMENT

i00355712 SEBP1833

For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6N-3821	[1]	REGULATOR AS
2.	009-8708	[2]	BOOT-TERMINAL
3.	2L-8076	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)(GROUND)
4.	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)(POS)
5.	1L-9048 C	[1]	NUT-PLATED JAM (7/16-14-THD)(POS)
	2H-3920 C	[1]	LOCKWASHER (POS)
6.	6V-8378 C	[1]	NUT (10-32-THD)(GROUND)
	8F-1434 C	[1]	LOCKWASHER (GROUND)
7.	1P-1130	[1]	KIT-BRUSH (ALTERNATOR)
			(INCLUDES 2 BRUSHES)
8.	6N-6717	[1]	KIT-INSULATOR (ALTERNATOR)
			(INCLUDES BUSHINGS, WASHERS, INSULATORS, SCREWS, STUD, NUTS, LOCKWASHERS & O-RING)
9.	2P-1713	[1]	KIT-RETAINER & SEAL (ALTERNATOR)
			(INCLUDES BEARING RETAINER, LIP SEAL, SPACER & WASHER)
10.	1P-1088	[1]	KIT-BRUSH & SPRING (ALTERNATOR)
			(INCLUDES SPRINGS)
11.	2P-1714	[1]	KIT-GASKET (ALTERNATOR)
			(INCLUDES GASKETS)
12.	1P-1091	[1]	KIT-REGULATOR (ALTERNATOR)
			(INCLUDES INSULATOR PLATE, COVER PLATE & GASKET)
13.	1P-1080	[1]	KIT-RETAINER & SEAL (ALTERNATOR)
			(INCLUDES RETAINER RINGS, RETAINER, & SEAL)
14.	1P-1131	[1]	KIT-SHAFT PARTS (ALTERNATOR)
			(INCLUDES NUT & LOCKWASHER)
15.	6N-5257	[1]	KIT-FRAME SCREW (ALTERNATOR)
			(INCLUDES BOLTS, & LOCKWASHERS)
	C		CHANGE FROM PREVIOUS TYPE

#SEBP18330427

331-5717: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

331-5717 ALTERNATOR GP-CHARGING
S/N 90U19731-UP
24-VOLT, 105-AMPERE
FIELD INSTALLATION

i03522400 SEBP1833

3315717 ALTERNATOR GP-CHARGING Parts scheme

For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
2.	1H-3244	[1]	LOCKWASHER
3.	6V-8187	[2]	NUT (1/4-28-THD)
4.	9L-6770	[1]	CAP-DUST
5.	231-6133	[1]	KIT-BEARING (ALTERNATOR)
	5P-3419	[1]	RACE-BEARING INNER
	229-9407	[1]	BEARING AS
6.	308-1362	[1]	RECTIFIER AS
7.	202-2708	[1]	DIODE AS (ALTERNATOR)
8.	3T-6354	[1]	REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR)
9.	202-9897	[1]	BEARING-SPECIAL BALL
10.	100-6531	[1]	FAN-ALTERNATOR (11-BLADE)
11.	187-2034	[1]	NUT-FLANGE (5/8-18-THD)
12.	202-2783	[1]	PLATE
13.	292-3815	[1]	KIT-TERMINAL
14.	202-2700	[1]	FRAME (ALTERNATOR)
15.	308-1365	[1]	STATOR AS (ALTERNATOR)
16.	308-1366	[1]	COIL AS (ALTERNATOR)
17.	9S-2390	[1]	RETAINER
18.	299-1761	[1]	ROTOR AS
19.	4B-2047	[1]	NUT (10-24-THD)
20.	8T-0328	[1]	WASHER-HARD (5.5X10X1-MM THK)
21.	8F-1434	[1]	LOCKWASHER
22.	202-2784	[1]	KIT-ALTERNATOR TERMINAL
			(INCLUDES NUT, LOCKWASHERS, WASHERS, INSULATORS, SCREW, CONNECTORS, & ADAPTER)
23.	202-2785	[1]	KIT-ALTERNATOR TERMINAL
			(INCLUDES STUD, BUSHINGS, WASHERS, CONNECTOR,
			AND NUT)
24.	202-2787	[1]	KIT-HARDWARE (ALTERNATOR)
			(INCLUDES NUT AS, SCREW AS, SCREW, PLUG, LOCKWASHER, NUT, CONNECTOR, BOLT, COLLAR & BOOT)
25.	328-8410	[1]	KIT-TERMINAL

#SEBP18330428

3E-7892: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

3E-7892 ALTERNATOR GP-CHARGING
S/N 90U19731-UP
12 VOLT, 85 AMPERE
AN ATTACHMENT

i00363286 SEBP1833

3E7892 ALTERNATOR GP-CHARGING Parts scheme

For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9S-2011	[1]	SCREW-MACHINE (1/4-20X0.5-IN)
	1H-3244	[1]	LOCKWASHER
2.	2K-4821	[1]	LOCKNUT (5/8-18-THD)
	7F-7621	[1]	WASHER (0.635X1.25X0.09-IN THK)
3.	9S-2260	[1]	PLATE-COVER
4.	9S-2255	[1]	COVER
5.	9S-2262	[1]	GASKET
6.	9S-2544	[6]	SCREW-HEX HEAD (8-32X11.13-MM)
7.	9B-7233	[10]	LOCKWASHER
8.	9S-2437	[5]	SCREW-TAPPING (10-24X19.05-MM)
	8F-1434	[5]	LOCKWASHER
9.	5P-3418	[1]	BEARING-ROLLER
	5P-3419	[1]	RACE-BEARING INNER
10.	9S-2396	[1]	BUSHING-TERMINAL
11.	9S-2393	[3]	DIODE-NEGATIVE
12.	9N-0943	[1]	PLUG-BEARING WELL
13.	9F-2247	[1]	PLUG-PIPE
14.	9S-2292	[1]	HEAT SINK AS
15.	100-6656	[1]	DIODE AS-ALTERNATOR
16.	9S-9830	[4]	SCREW-FORMING (8-32X19.05-MM)
	8C-9660	[4]	WASHER (4.6X7.9X0.8-MM THK)
	9S-2300	[4]	INSULATOR
17.	9S-2301	[1]	INSULATION
18.	9S-2248	[1]	COIL & SUPPORT AS
19.	9N-3388	[3]	BOLT (10-24X0.75-IN)
20.	3E-5451	[1]	REGULATOR AS-VOLTAGE (12-VOLT)(ALTERNATOR)
	100-6657	[1]	PLATE
21.	7N-9023	[1]	SCREW AS (8-32X26.9-MM)
22.	6N-1872	[2]	SCREW AS (8-32X1.25-IN)
23.	4B-2043	[4]	NUT (8-32-THD)
24.	9S-2302	[1]	ROTOR AS
25.	100-6678	[1]	STATOR AS-ALTERNATOR (12 VOLT)
26.	9S-2005	[1]	GROMMET
27.	2L-8075	[3]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
28.	9S-2013	[1]	KIT-RELAY TERMINAL (ALTERNATOR AIR)
			(INCLUDES BUSHING, WASHERS, NUT ASSEMBLIES & TERMINAL STUD)
29.	100-6658	[1]	WIRE AS-ALTERNATOR (16 GA)(YELLOW)
30.	9S-2012	[1]	KIT-OUTPUT TERMINAL (ALTERNATOR AIR)
			(INCLUDES GASKETS, NUT AS & TERMINAL)
	9S-2389	[1]	STUD AS
31.	9L-6770	[1]	CAP-DUST
32.	2P-5616	[1]	FRAME-DRIVE END
33.	9S-2390	[1]	RETAINER
34.	9X-2500	[4]	SCREW-HEX FLANGE (10-24X38.1-MM)
35.	9S-2009	[4]	BOLT-FLANGE HEAD (10-24X3.625-IN)
36.	100-6532	[1]	COLLAR-ALTERNATOR
37.	5P-7807	[1]	BALL BEARING
38.	100-6531	[1]	FAN-ALTERNATOR (11-BLADE)

#SEBP18330429

3T-6352: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

3T-6352 ALTERNATOR GP-CHARGING
S/N 90U19731-UP
24-VOLT, 35-AMPERE
PART OF 6N-9294 ALTERNATOR GP-CHARGING
FIELD REPLACEMENT ORDER @@@@@ 6N-9294@@@@@
AN ATTACHMENT

i00122068 SEBP1833

3T6352 ALTERNATOR GP-CHARGING Parts scheme

For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7N-9024	[4]	BOLT (10-24X2.5-IN)
2.	2K-4821	[1]	LOCKNUT (5/8-18-THD)
3.	7F-7621	[1]	WASHER (0.635X1.25X0.09-IN THK)
4.	3E-5454	[1]	FAN-ALTERNATOR (11-BLADE)
5.	7N-7810	[1]	FRAME AS-DRIVE END
6.	7N-7805	[1]	HOUSING
7.	6V-2202	[1]	BALL BEARING
8.	9S-2437	[3]	SCREW-TAPPING (10-24X19.05-MM)
9.	7N-7809	[1]	PLATE
10.	5P-6920	[1]	BEARING-ROLLER
11.	030-9612	[5]	SCREW-FORMING (10-24X0.5-IN)
12.	7N-7806	[1]	COIL AS-FIELD
13.	7N-7800	[1]	ROTOR AS
14.	7N-7804	[1]	STATOR AS
15.	9L-2137	[1]	RETAINER AS
16.	9N-3388	[4]	BOLT (10-24X0.75-IN)
17.	7N-7795	[1]	COLLAR
18.	9S-2544	[2]	SCREW-HEX HEAD (8-32X11.13-MM)
19.	9L-2140	[1]	PLATE
20.	9L-2139	[1]	WASHER-FELT (1.31X1.68X0.125-IN THK)
21.	4B-2043	[4]	NUT (8-32-THD)
22.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
23.	6N-1872	[2]	SCREW AS (8-32X1.25-IN)
24.	9B-7233	[6]	LOCKWASHER
25.	8F-1434	[4]	LOCKWASHER
26.	7N-9023	[2]	SCREW AS (8-32X26.9-MM)
27.	3T-6354	[1]	REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR)
28.	1H-3244	[1]	LOCKWASHER
29.	7N-7811	[1]	CONNECTOR
30.	6V-8187	[1]	NUT (1/4-28-THD)
31.	112-9119	[1]	DIODE AS-ALTERNATOR
32.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
33.	7N-7122	[1]	RECTIFIER AS (ALTERNATOR)
34.	7N-9021	[1]	SCREW AS (8-32X1.34-IN)
35.	7N-7796	[1]	BUSHING-TERMINAL
36.	7N-7802	[1]	CAPACITOR AS
37.	7N-7801	[1]	CONNECTOR
38.	7N-7798	[1]	CONNECTOR
39.	9L-6770	[1]	CAP-DUST (CONNECTOR)

			AVAILABLE REPAIR KIT(S):
	7N-7807	[1]	KIT-OUTPUT TERMINAL (ALTERNATOR)
			(INCLUDES INSULATOR, SCREW, WASHERS, LOCKWASHER, NUT & ADAPTER)
	7N-7808	[1]	KIT-RELAY TERMINAL (ALTERNATOR)
			(INCLUDES STUD, BUSHINGS, WASHERS & NUT AS)