2W-9608 CAMSHAFT GP S/N 4KG1-9870 3116 MARINE ENGINE

Pos.	Part No	Qty	Parts name
1.	7W-5426	[1]	CAMSHAFT AS
1A.	1B-8705	[1]	KEY-WOODRUFF
1B.	7W-4070	[1]	GEAR (100-TEETH)
3.	107-7694	[1]	PLATE-THRUST
4.	6V-3940 M	[2]	BOLT (M8X1.25X25-MM)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP18740011

4W-3462: CARRIER GP-SEAL

CARRIER GP-SEAL

4W-3462 CARRIER GP-SEAL
S/N 4KG1-9870

i00122128 SEBP1874

For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2W-6546	[1]	COVER
2.	247-1876	[1]	SEAL
3.	239-0583	[1]	GASKET
4.	6V-3538	[2]	DOWEL
5.	6V-3940 M	[8]	BOLT (M8X1.25X25-MM)
6.	9M-1974	[8]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

#SEBP18740012

9Y-7565: CLUTCH GP

CLUTCH GP

9Y-7565 CLUTCH GP
POWER TAKEOFF
PART OF 9Y-7566 POWER TAKE-OFF GP
AN ATTACHMENT

i00446471 SEBP1874

For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8B-4516	[1]	KEY
2.	6B-0672	[6]	SPRING
3.	6L-3968	[4]	PIN
	6L-3964	[4]	PIN-COTTER
4.	6B-0673	[1]	PLATE
5.	4B-4703	[4]	LEVER
6.	6B-0674	[1]	SLEEVE
7.	6B-0165	[8]	LINK
8.	6L-3965	[8]	PIN
	6L-3960	[8]	PIN-COTTER
9.	4B-4775	[1]	HOSE AS
10.	5B-2407	[1]	LOCK
	3F-9556	[1]	LOCKWASHER
	2H-3755	[1]	BOLT (5/16-18X0.43-IN)
11.	5B-6159	[1]	SETSCREW-POINT
12.	2N-9363	[1]	RETAINER-BEARING
13.	4B-7255	[2]	CONE-BEARING
14.	108-3560	[1]	PLATE-WARNING (POWER TAKE-OFF)
	1L-6931	[2]	SCREW AS-MACHINE (1/4-20X0.5-IN)
15.	7W-6991	[1]	HOUSING-CLUTCH
16.	7E-8584	[1]	SHAFT-CLUTCH
17.	4W-2652	[1]	LEVER AS-HAND
	0S-1587	[1]	BOLT (1/2-13X1.75-IN)
18.	2N-8079	[1]	COLLAR AS
	0L-0639	[2]	BOLT (3/8-24X2.25-IN)
	2L-6267	[2]	LOCKNUT (3/8-24-THD)
	6B-0166 B	[2]	SHIM
19.	6L-5151	[2]	KEY-WOODRUFF
20.	6B-0169	[1]	FORK AS
21.	0S-1591	[2]	BOLT (3/8-16X1.5-IN)
	9F-5644	[2]	LOCKWASHER
22.	6B-0179	[1]	PIN
23.	6B-0177	[1]	YOKE-ADJUSTMENT
24.	6B-0669	[1]	PLATE
25.	1H-9436	[1]	PLATE-DRIVE
26.	4B-4753	[1]	NUT
	4B-4771	[1]	LOCK
27.	4B-4713	[1]	SPRING
28.	8B-7121	[2]	FITTING-HYDRAULIC
29.	6B-0182	[1]	SHAFT
30.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
31.	9S-1354	[1]	NUT (5/8-18-THD)
	6F-0253	[1]	LOCKWASHER
32.	108-3561	[1]	PLATE-INSTRUCTION (POWER TAKE-OFF)
	B		USE AS REQUIRED

#SEBP18740013

4W-2108: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

4W-2108 COVER GP-CYLINDER BLOCK
S/N 4KG1332-1542

i00378364 SEBP1874

4W2108 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	342-4977	[3]	COVER-SIDE
2.	6V-2317 M	[20]	BOLT (M8X1.25X30-MM)
3.	9M-1974	[20]	WASHER-HARD (8.8X16X2-MM THK)
4.	2W-6544	[1]	COVER
5.	517-0553	[1]	GASKET
7.	4Y-9652	[3]	GASKET
8.	7W-3872	[6]	SLEEVE
9.	6V-5839	[2]	WASHER (11X21X2.5-MM THK)
10.	6V-5842 M	[2]	BOLT (M10X1.5X40-MM)
11.	9S-4191	[3]	PLUG (9/16-18-THD)
12.	3J-1907	[3]	SEAL-O-RING
13.	4F-9653	[1]	SEAL-O-RING
14.	9Y-0747	[1]	MANIFOLD-OIL
15.	6V-2317 BM	[1]	BOLT (M8X1.25X30-MM)
16.	9M-1974 B	[1]	WASHER-HARD (8.8X16X2-MM THK)
17.	9X-2099 BM	[1]	STUD (M8X1.25X52.75-MM)
18.	8T-4224 B	[1]	WASHER-HARD (8.8X16X2-MM THK)
19.	110-7618	[4]	BOLT AS
20.	9X-2099 BM	[1]	STUD (M8X1.25X52.75-MM)
21.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
22.	134-4640	[1]	SPACER (9X15X15-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP18740014

7C-0299: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

7C-0299 COVER GP-CYLINDER BLOCK
S/N 4KG1-1331; 4KG1540-UP
ALSO AN ATTACHMENT

i00122239 SEBP1874

7C0299 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-2317 M	[18]	BOLT (M8X1.25X30-MM)
2.	9M-1974	[21]	WASHER-HARD (8.8X16X2-MM THK)
3.	7W-3872	[6]	SLEEVE (MARKED X)
4.	342-4977	[2]	COVER-SIDE
5.	4Y-9652	[3]	GASKET
6.	7W-9395	[1]	COVER-SIDE
7.	6V-5217 M	[3]	BOLT (M8X1.25X20-MM)
8.	2W-6544	[1]	COVER
9.	9S-4191 C	[3]	PLUG (9/16-18-THD)
10.	3J-1907 C	[3]	SEAL-O-RING
11.	4F-9653	[1]	SEAL-O-RING
12.	9Y-0747 C	[1]	MANIFOLD-OIL
13.	6V-5842 CM	[2]	BOLT (M10X1.5X40-MM)
14.	6V-5839 C	[2]	WASHER (11X21X2.5-MM THK)
15.	110-7618	[4]	BOLT AS
16.	517-0553 B	[1]	GASKET
17.	9X-2099 M	[2]	STUD (M8X1.25X52.75-MM)
18.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
20.	039-2281	[1]	SPACER (9X16X25-MM THK)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP18740015

7L-0004: COVER GP-FRONT HOUSING

COVER GP-FRONT HOUSING

7L-0004 COVER GP-FRONT HOUSING
S/N 4KG1-9870

i00167732 SEBP1874

7L0004 COVER GP-FRONT HOUSING Parts scheme

For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-0100 M	[2]	BOLT (M8X1.25X60-MM)
2.	106-7920	[1]	COVER AS-FRONT
3.	6V-2317 M	[10]	BOLT (M8X1.25X30-MM)
4.	135-9819	[1]	SEAL-INTEGRAL
5.	6V-8336 M	[2]	BOLT (M12X1.75X70-MM)
6.	6V-8149 M	[2]	NUT (M12X1.75-THD)
7.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
8.	7W-6552	[1]	GASKET
9.	4W-2026	[1]	COVER
10.	6V-2317 M	[2]	BOLT (M8X1.25X30-MM)(LOCATION A)
11.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP18740016

4P-3572: COVER GP-VALVE MECHANISM

COVER GP-VALVE MECHANISM

4P-3572 COVER GP-VALVE MECHANISM
FOR USE WITH TOP OIL FILL
CANNOT BE USED WITH LEFT OR RIGHT SIDE OIL FILLER
AN ATTACHMENT

i00375899 SEBP1874

4P3572 COVER GP-VALVE MECHANISM Parts scheme

For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	105-1542	[1]	GASKET
2.	6V-8490 M	[14]	BOLT (M6X1X25-MM)
3.	9Y-7616	[1]	COVER AS
4.	5P-0537	[14]	WASHER-HARD (7.2X14.5X2-MM THK)
5.	7E-5380	[1]	CAP-OIL FILLER (ENGINE)
	M		METRIC PART

#SEBP18740017

4W-2172: COVER GP-VALVE MECHANISM

COVER GP-VALVE MECHANISM

4W-2172 COVER GP-VALVE MECHANISM
S/N 4KG1-9870

i00122119 SEBP1874

4W2172 COVER GP-VALVE MECHANISM Parts scheme

For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	119-2940	[1]	GASKET (VALVE COVER)
2.	6V-2315 M	[14]	BOLT (M6X1X35-MM)
3.	119-2960	[1]	COVER
4.	5P-0537	[14]	WASHER-HARD (7.2X14.5X2-MM THK)
	M		METRIC PART

#SEBP18740018

4W-2197: CRANKSHAFT GP

CRANKSHAFT GP

4W-2197 CRANKSHAFT GP
S/N 4KG1-8069

i00122122 SEBP1874

For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	105-1725	[1]	CRANKSHAFT AS
2.	1B-8705	[1]	KEY-WOODRUFF
3.	2W-8147	[1]	GEAR (50-TEETH)
4.	107-7602	[1]	BEARING-THRUST
	7C-6969 AB		BEARING-THRUST (0.5-MM OS)
	7C-6970 AB		BEARING-THRUST (0.5-MM OS, 0.5-MM US)
	7C-6966 AB		BEARING-THRUST (0.25-MM US)
	7C-6967 AB		BEARING-THRUST (0.5-MM US)
5.	101-1530	[3]	BEARING-MAIN
	7C-6974 AB		BEARING-MAIN (0.5-MM OS)
	7C-6975 AB		BEARING-MAIN (0.5-MM OS, 0.5-MM US)
	7C-6971 AB		BEARING-MAIN (0.25-MM US)
	7C-6972 AB		BEARING-MAIN (0.5-MM US)
6.	107-7708	[3]	BEARING-MAIN
	7C-6964 AB		BEARING-MAIN (0.5-MM OS)
	7C-6965 AB		BEARING-MAIN (0.5-MM OS, 0.5-MM US)
	7C-6961 AB		BEARING-MAIN (0.25-MM US)
	7C-6962 AB		BEARING-MAIN (0.5-MM US)

	7C-7980 AF	[1]	SLEEVE-OIL SEAL
			(USED ONLY TO REPAIR THE REAR SEAL SURFACE OF THE CRANKSHAFT)

			AVAILABLE REPAIR KIT(S):
	196-9518		KIT-BASIC ENGINE REPAIR (MAIN BEARING)(CRANKSHAFT)
			(INCLUDES A COMPLETE SET OF STANDARD MAIN & THRUST BEARINGS)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	F		NOT SHOWN
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP18740019

4W-2197: CRANKSHAFT GP

CRANKSHAFT GP

4W-2197 CRANKSHAFT GP
S/N 4KG8070-9870

i00887116 SEBP1874

For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	489-2731	[1]	CRANKSHAFT AS
1A.	1B-8705	[1]	KEY-WOODRUFF
1B.	2W-8147	[1]	GEAR (50-TEETH)
2.	212-4893	[1]	BEARING-THRUST
	229-5153 AB		BEARING-THRUST (0.25-MM US)
	229-5154 AB		BEARING-THRUST (0.5-MM US)
	229-5155 AB		BEARING-THRUST (0.5-MM OS)
	229-5156 AB		BEARING-THRUST (0.5-MM OS, 0.5-MM US)
3.	107-7708	[6]	BEARING-MAIN
	145-0162 AB		BEARING-MAIN (0.25-MM US)
	145-0164 AB		BEARING-MAIN (0.5-MM US)
	145-0168 AB		BEARING-MAIN (0.5-MM OS)
	145-0170 AB		BEARING-MAIN (0.5-MM OS, 0.5-MM US)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	R		REMANUFACTURED PART MAY BE AVAILABLE