AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6I-1212 PISTON & ROD GP S/N 4KG1378-3390 16:1 RATIO 3116 MARINE ENGINE


BASIC ENGINE
PISTON & ROD GP
POWER TAKE-OFF GP
PULLEY GP
PISTON & ROD GP
VALVE MECHANISM GP

MARINE ENGINE 3116 MARINE ENGINE 4KG
 3116 Marine Engine 4KG00001-UP SEBP1874 3116 4KG   (1987)

BASIC ENGINE

PISTON & ROD GP
PISTON & ROD GP
115-4234 PISTON & ROD GP
PISTON & ROD GP
6I-1212 PISTON & ROD GP
PISTON & ROD GP
9Y-8543 PISTON & ROD GP
RING GP-PISTON
7E-5214 RING GP-PISTON
 

#SEBP18740090
 

6I-1212: PISTON & ROD GP

6I-1212 PISTON & ROD GP
S/N 4KG1378-3390
16:1 RATIO
i00392024 SEBP1874
6I1212 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-4248 [1] CROWN AS-PISTON  
2. 105-1746 [1] RING-PISTON (TOP)(TOP)  
3. 7E-5786 [1] RING-PISTON (INTERMEDIATE)(INTERMEDIATE)  
4. 7C-5232 [1] RING-PISTON (OIL)(OIL)  
5. 7C-0111 [2] RETAINER-PIN  
6. 7C-3901 [1] PIN-PISTON  
7. 2W-9128 [1] ROD AS-CONNECTING  
8. 2W-0027 [1] BEARING (EYE END)  
9. 9N-3832 [2] BOLT-CONNECTING ROD  
10. 9L-7669 [2] NUT-CONNECTING ROD (7/16-20-THD)  
11. 7W-9415 [1] BEARING-CONNECTING ROD (STANDARD)(STANDARD)  
  7C-6976 A [1] BEARING-CONNECTING ROD (0.25-MM US)  
  7C-6977 A [1] BEARING-CONNECTING ROD (0.5-MM US)  
12. 4P-1549 [1] SKIRT-PISTON  
  A   NOT PART OF THIS GROUP
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP18740091
 

9Y-8543: PISTON & ROD GP

9Y-8543 PISTON & ROD GP
S/N 4KG1-2626
16:1 RATIO
i00157961 SEBP1874
9Y8543 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-3226 [1] CROWN AS-PISTON  
2. 105-1746 [1] RING-PISTON (TOP)  
3. 7E-5786 [1] RING-PISTON (INTERMEDIATE)  
4. 7C-5232 [1] RING-PISTON (OIL)  
5. 7C-0111 [2] RETAINER-PIN  
6. 7C-3901 [1] PIN-PISTON  
7. 2W-9128 [1] ROD AS-CONNECTING  
8. 2W-0027 [1] BEARING (EYE END)  
9. 9N-3832 [2] BOLT-CONNECTING ROD  
10. 9L-7669 [2] NUT-CONNECTING ROD (7/16-20-THD)  
11. 7W-9415 [1] BEARING-CONNECTING ROD (STANDARD)  
  7C-6976 A [1] BEARING-CONNECTING ROD (0.25-MM US)  
  7C-6977 A [1] BEARING-CONNECTING ROD (0.5-MM US)  
12. 4P-1546 [1] SKIRT-PISTON  
  A   NOT PART OF THIS GROUP
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP18740092
 

9Y-7566: POWER TAKE-OFF GP

9Y-7566 POWER TAKE-OFF GP
CLUTCH
AN ATTACHMENT
i00446477 SEBP1874
9Y7566 POWER TAKE-OFF GP Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-7564 [1] HOUSING AS-FRONT  
2. 6V-3537 [2] DOWEL  
3. 6V-8336 M [1] BOLT (M12X1.75X70-MM)  
4. 0S-1594 [12] BOLT (3/8-16X1-IN)  
5. 9Y-7565 Y [1] CLUTCH GP  
6. 8T-0643 M [8] BOLT (M10X1.5X80-MM)  
  6V-5839 [8] WASHER (11X21X2.5-MM THK)  
7. 9Y-7777 [1] COUPLING-FRONT  
8. 8T-0372 M [5] BOLT (M12X1.75X90-MM)  
9. 5P-0898 [1] BALL BEARING  
10. 5B-2440 [1] KEY  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP18740093
 

4W-5429: PULLEY GP-CRANKSHAFT

4W-5429 PULLEY GP-CRANKSHAFT
S/N 4KG1-9870
i00122132 SEBP1874
4W5429 PULLEY GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3773 [1] PULLEY-CRANKSHAFT (1-GROOVE)  
2. 8T-3666 M [4] BOLT (M14X2X60-MM)  
3. 2W-7381 [1] PLATE-CLAMP  
  M   METRIC PART
 

#SEBP18740094
 

7C-6995: PULLEY GP-CRANKSHAFT

7C-6995 PULLEY GP-CRANKSHAFT
PROVIDES FRONT PULLEY WITH 3-15.88 MM WIDE BELT GROOVES
AN ATTACHMENT
i00387282 SEBP1874
7C6995 PULLEY GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 291-6237 [1] PULLEY  
2. 8T-0355 M [8] BOLT (M10X1.5X110-MM)  
3. 8T-2561 [8] WASHER-HARD (10.5X28.5X5-MM THK)  
  M   METRIC PART
 

#SEBP18740095
 

7E-5214: RING GP-PISTON

7E-5214 RING GP-PISTON
FOR USE WITH 1.1L ENGINES BUILT WITH PLASMA COATED TOP RINGS ON THE PISTON
FIELD INSTALLATION
i00167712 SEBP1874
7E5214 RING GP-PISTON Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-7787 [1] RING-PISTON (TOP)  
2. 7E-5786 [1] RING-PISTON (INTERMEDIATE)  
3. 7C-5232 [1] RING-PISTON (OIL)  
 

#SEBP18740096
 

107-7722: ROCKER ARM GP

107-7722 ROCKER ARM GP
S/N 4KG174-9870
PART OF 4P-4372 MECHANISM GP-FUEL PUMP & VALVE
i00123072 SEBP1874
1077722 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 260-7524 M [2] SCREW-VALVE ADJUSTMENT (M10X1.5-THD)  
2. 2Y-5829 M [2] NUT (M10X1.5-THD)  
3. 4P-7790 [1] SHAFT AS-ARM  
3A. 2D-6642 [1] BALL  
3B. 7M-5130 [1] PIN-SPRING  
3C. 7W-4137 [1] SHAFT AS  
3D. 0L-1026 [1] PLUG-CUP  
4. 9Y-8534 [1] SUPPORT-SHAFT  
5. 105-1776 [1] ROCKER ARM AS (UNIT INJECTOR)  
6. 7W-4117 M [1] NUT (M12X1.25-THD)  
7. 9Y-4973 [1] SCREW-INJECTION ADJUSTMENT  
8. 7W-3983 [1] RING-RETAINING  
9. 9Y-1582 [1] BUTTON-ARM  
10. 6I-0924 [2] ROCKER ARM AS  
    (EACH INCLUDES)
10A. 100-6291 [1] SEAT-WEAR  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP18740097
 

7C-6077: ROCKER ARM GP

7C-6077 ROCKER ARM GP
S/N 4KG1-106
PART OF 2W-9607 VALVE MECHANISM GP
i00408776 SEBP1874
7C6077 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-4118 M [2] SCREW-VALVE ADJUSTMENT  
2. 2Y-5829 M [2] NUT (M10X1.5-THD)  
3. 7W-4376 [1] SHAFT AS-ARM  
4. 7W-4374 [1] SUPPORT-SHAFT  
5. 6V-3536 [1] DOWEL  
6. 8S-0527 C [1] PLUG-CUP  
7. 7W-4137 [1] SHAFT AS  
8. 0L-1026 [1] PLUG-CUP  
9. 7W-4420 [1] SUPPORT-SHAFT  
10. 7W-4338 [2] ROCKER ARM AS  
11. 9Y-4973 [1] SCREW-INJECTION ADJUSTMENT  
12. 7W-4117 M [1] NUT (M12X1.25-THD)  
13. 7W-3978 [1] ROCKER ARM AS  
14. 7W-3980 [1] BUSHING  
15. 7W-3981 [1] SOCKET-ARM  
16. 7W-3983 [1] RING-RETAINING  
17. 9Y-1582 C [1] BUTTON-ARM  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP18740098
 

7C-6077: ROCKER ARM GP

7C-6077 ROCKER ARM GP
S/N 4KG107-UP
PART OF 4P-4372 MECHANISM GP-FUEL PUMP & VALVE, 2W-9607 VALVE MECHANISM GP
i00167683 SEBP1874
7C6077 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-4832 M [2] SCREW-VALVE ADJUSTMENT (M10X1.5X38-MM)  
2. 2Y-5829 M [2] NUT (M10X1.5-THD)  
3. 9Y-8532 [1] SHAFT AS-ARM  
4. 9Y-8533 [1] SUPPORT-SHAFT  
5. 7M-5130 [1] PIN-SPRING  
6. 7W-4137 [1] SHAFT AS  
7. 0L-1026 [1] PLUG-CUP  
8. 7W-3983 [1] RING-RETAINING  
9. 9Y-1582 [1] BUTTON-ARM  
10. 7W-4338 [2] ROCKER ARM AS  
11. 9Y-4973 [1] SCREW-INJECTION ADJUSTMENT  
12. 7W-4117 M [1] NUT (M12X1.25-THD)  
13. 9Y-3222 [1] ROCKER ARM AS (UNIT INJECTOR)  
14. Z [1] BEARING-SLEEVE  
15. Z [1] SOCKET-ARM  
16. 7E-7922 [1] SUPPORT AS-SHAFT  
  9Y-8533 [1] SUPPORT-SHAFT  
17. 8S-0527 [1] PLUG-CUP  
  M   METRIC PART
  Z   NOT SERVICED SEPARATELY
 

#SEBP18740099
 

7C-6077: ROCKER ARM GP

7C-6077 ROCKER ARM GP
S/N 4KG174-UP
PART OF 4P-4372 MECHANISM GP-FUEL PUMP & VALVE
i00122273 SEBP1874
7C6077 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-4832 M [2] SCREW-VALVE ADJUSTMENT (M10X1.5X38-MM)  
2. 2Y-5829 M [2] NUT (M10X1.5-THD)  
3. 4P-7790 C [1] SHAFT AS-ARM  
4. 2D-6642 [1] BALL  
5. 7M-5130 [1] PIN-SPRING  
6. 7W-4137 [1] SHAFT AS  
7. 0L-1026 [1] PLUG-CUP  
8. 7W-3983 [1] RING-RETAINING  
9. 9Y-1582 [1] BUTTON-ARM  
10. 6I-0924 C [2] ROCKER ARM AS  
11. 9Y-4973 [1] SCREW-INJECTION ADJUSTMENT  
12. 7W-4117 M [1] NUT (M12X1.25-THD)  
13. 105-1776 [1] ROCKER ARM AS (UNIT INJECTOR)  
14. Z [1] BEARING-SLEEVE  
15. Z [1] SOCKET-ARM  
16. 9Y-8534 [1] SUPPORT-SHAFT  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Z   NOT SERVICED SEPARATELY
 

Information:

Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/11/10
Increase Piston Reuse With Keystone Piston Ring Gauge Group
1986/07/01
Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/12/01
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method
1987/06/01
Installation Of Zinc Rods In Caterpillar Marine Engines
1991/01/01
Oversize Pistons Not Available
1993/04/01
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/11/01
Piston Usage Chart For Two Piece Pistons{1214}
1995/08/01
New Fractured Connecting Rod Has Been Released {1218}
2003/07/01
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Installation Instructions for Piston Packs{1225, 1239}
Installation Instructions for Piston Packs{1225, 1239}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Piston Cooling Jet
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Connecting Rod
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Piston and Rings
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Connecting Rod Bearing Journal
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Information Release Memo
NEW FRACTURED SPLIT ROD IS CURRENTLY PRODUCTION RELEASED FOR THE C9, 3114, 3116 AND 3126 ENGINES
NEW FRACTURED SPLIT ROD IS CURRENTLY PRODUCTION RELEASED FOR THE C9, 3114, 3116 AND 3126 ENGINES
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Compression - Test
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Excessive Bearing Wear - Inspect
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Connecting Rod Bearings - Inspect
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Piston Ring Groove - Inspect
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Troubleshooting
Engine Has Early Wear
3114, 3116 and 3126 Engines
Excessive Engine Oil Consumption
3114, 3116 and 3126 Engines
Mechanical Noise (Knock) in Engine
3114, 3116 and 3126 Engines
Disassembly and Assembly
Bearing Clearance - Check
3114, 3116 and 3126 Engines
Piston Cooling Jets - Remove and Install
3114, 3116 and 3126 Engines
Pistons and Connecting Rods - Remove
3114, 3116 and 3126 Engines
Pistons and Connecting Rods - Install
3114, 3116 and 3126 Engines
Pistons and Connecting Rods - Assemble
3114, 3116 and 3126 Engines
Pistons and Connecting Rods - Disassemble
3114, 3116 and 3126 Engines
Service Magazine
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Installation Of Zinc Rods In Caterpillar Marine Engines{1350,1388}
1990/12/24
Oversize Pistons Not Available{1214,1216}
1993/04/05
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/10/31
Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13

Caterpillar Parts SIS Catalog 3116 :

PISTON & ROD GP
115-4234 PISTON & ROD GP
PAN GP-OIL
7C-6597 PAN GP-OIL
PAN GP-OIL
117-5123 PAN GP-OIL
MOUNTING GP-HYD PUMP DRIVE
9Y-7508 MOUNTING GP-HYD PUMP DRIVE
MOUNTING GP-ENGINE FLEXIBLE
4P-0878 MOUNTING GP-ENGINE FLEXIBLE
MOUNTING GP-ENGINE FLEXIBLE
2N-7379 MOUNTING GP-ENGINE FLEXIBLE
MOUNTING GP-ENGINE
139-1503 MOUNTING GP-ENGINE
MOUNTING GP-ENGINE
110-4402 MOUNTING GP-ENGINE
PISTON & ROD GP
9Y-8543 PISTON & ROD GP
POWER TAKE-OFF GP
9Y-7566 POWER TAKE-OFF GP
PULLEY GP-CRANKSHAFT
4W-5429 PULLEY GP-CRANKSHAFT
PULLEY GP-CRANKSHAFT
7C-6995 PULLEY GP-CRANKSHAFT
RING GP-PISTON
7E-5214 RING GP-PISTON
ROCKER ARM GP
107-7722 ROCKER ARM GP
ROCKER ARM GP
7C-6077 ROCKER ARM GP
ROCKER ARM GP
7C-6077 ROCKER ARM GP

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QUÉBEC, Quebec, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.