AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

149-5403 CYLINDER BLOCK GP S/N 1SK2197-UP PART OF 7E-2482 CYLINDER BLOCK GP 3116 MARINE ENGINE


BASIC ENGINE
CYLINDER BLOCK GP
CYLINDER HEAD GP

MARINE ENGINE 3116 MARINE ENGINE 1SK
 3116 Marine Engine 1SK00001-UP SEBP1876 3116 1SK   (1991)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK GP
100-4948 CYLINDER BLOCK GP
CYLINDER BLOCK GP
129-1095 CYLINDER BLOCK GP
CYLINDER BLOCK GP
149-5403 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7C-5826 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
 

#SEBP18760020
 

149-5403: CYLINDER BLOCK GP

149-5403 CYLINDER BLOCK GP
S/N 1SK2197-UP
PART OF 7E-2482 CYLINDER BLOCK GP
i00907543 SEBP1876
1495403 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 149-5402 [1] CYLINDER BLOCK AS  
2. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
3. 9X-8916 M [14] BOLT (M16X2X140-MM)  
4. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
5. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
6. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
7. 2M-6471 [2] PLUG-CUP  
8. 9S-8008 B [2] PLUG (1-1/16-12-THD)  
9. 3D-2824 B [2] SEAL-O-RING  
10. 3H-5552 [1] PLUG-CUP  
11. 9S-8006 [1] PLUG (7/8-14-THD)  
12. 2M-9780 [1] SEAL-O-RING  
13. 216-5586 [1] BUSHING (CAMSHAFT)  
14. 2W-7213 [6] BUSHING (CAMSHAFT)  
15. 3K-0360 [1] SEAL-O-RING  
16. 9S-8005 [1] PLUG (3/4-16-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP18760021
 

7C-5826: CYLINDER BLOCK GP

7C-5826 CYLINDER BLOCK GP
S/N 1SK1-1498
PART OF 7E-2482 CYLINDER BLOCK GP
i00187685 SEBP1876
7C5826 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-6471 [2] PLUG-CUP  
2. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
3. 9X-8916 M [14] BOLT (M16X2X140-MM)  
4. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
5. 9S-8005 [1] PLUG (3/4-16-THD)  
6. 3K-0360 [1] SEAL-O-RING  
7. 2W-7213 [6] BUSHING (CAMSHAFT)  
8. 3D-2824 [2] SEAL-O-RING  
9. 9S-8008 [2] PLUG (1-1/16-12-THD)  
10. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
11. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
12. 3H-5552 [1] PLUG-CUP  
13. 9S-8006 [1] PLUG (7/8-14-THD)  
14. 2M-9780 [1] SEAL-O-RING  
15. 2W-7211 [1] BUSHING (CAMSHAFT)  
  7C-6208 AF [1] SLEEVE-CYLINDER  
    (FOR SALVAGE OF DAMAGED CYL. BORES IN BLOCK. QUANTITY TO BE DETERMINED BY USER.)
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP18760022
 

7E-2482: CYLINDER BLOCK GP

7E-2482 CYLINDER BLOCK GP
S/N 1SK1-1498
i00187720 SEBP1876
7E2482 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-5826 Y [1] CYLINDER BLOCK GP  
2. 6V-3538 [2] DOWEL  
3. 4P-5651 [6] TUBE AS-OIL JET  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
6. 1W-8407 [2] SLEEVE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP18760023
 

7E-2482: CYLINDER BLOCK GP

7E-2482 CYLINDER BLOCK GP
S/N 1SK1499-1676
i00187718 SEBP1876
7E2482 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-4948 CY [1] CYLINDER BLOCK GP  
2. 6V-3538 [2] DOWEL  
3. 4P-5651 [6] TUBE AS-OIL JET  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
6. 1W-8407 [2] SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP18760024
 

7E-2482: CYLINDER BLOCK GP

7E-2482 CYLINDER BLOCK GP
S/N 1SK1677-2196
i00187719 SEBP1876
7E2482 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 129-1095 YC [1] CYLINDER BLOCK GP  
2. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
3. 1W-8407 [2] SLEEVE  
4. 6V-3538 [2] DOWEL  
5. 4P-5651 [6] TUBE AS-OIL JET  
6. 7N-5683 [2] DOWEL  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP18760025
 

7E-2482: CYLINDER BLOCK GP

7E-2482 CYLINDER BLOCK GP
S/N 1SK2197-UP
i00919892 SEBP1876
7E2482 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 149-5403 YC [1] CYLINDER BLOCK GP  
2. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
3. 1W-8407 [2] SLEEVE  
4. 6V-3538 [2] DOWEL  
5. 4P-5651 [6] TUBE AS-OIL JET  
6. 7N-5683 [2] DOWEL  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP18760026
 

107-7609: CYLINDER HEAD AS

107-7609 CYLINDER HEAD AS
S/N 1SK1204-1498
PART OF 105-1686 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@107-7720@@@@@
i00188355 SEBP1876
1077609 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [1] CYLINDER HEAD  
2. 1W-2713 [6] INSERT-VALVE SEAT (EXHAUST)  
3. 4P-8378 [6] SEAT-VALVE  
4. 119-3061 [6] SLEEVE  
5. 8M-5860 [6] PLUG-CUP  
  Z   NOT SERVICED SEPARATELY
 

#SEBP18760027
 

107-7720: CYLINDER HEAD AS

107-7720 CYLINDER HEAD AS
S/N 1SK1204-1498
FIELD REPLACEMENT FOR @@@@@107-7609@@@@@
i00188358 SEBP1876
1077720 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-8848 [12] GUIDE-VALVE  
2. 9S-8003 [3] PLUG (1/2-20-THD)  
3. 1J-9671 [3] SEAL-O-RING  
4. 2M-6471 [2] PLUG-CUP  
5. 119-3036 [12] SEAL-VALVE STEM  
 

#SEBP18760028
 

126-0445: CYLINDER HEAD AS

126-0445 CYLINDER HEAD AS
S/N 1SK1499-UP
FIELD REPLACEMENT FOR @@@@@126-5867@@@@@
i00513227 SEBP1876
1260445 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-8848 [12] GUIDE-VALVE  
2. 9S-8003 [3] PLUG (1/2-20-THD)  
3. 1J-9671 [3] SEAL-O-RING  
4. 2M-6471 [2] PLUG-CUP  
5. 119-3036 [12] SEAL-VALVE STEM  
6. 126-5867 Y [1] CYLINDER HEAD AS  
7. 3J-7354 [1] SEAL-O-RING  
8. 9S-8002 [1] PLUG (7/16-20-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP18760029
 

126-5867: CYLINDER HEAD AS

126-5867 CYLINDER HEAD AS
S/N 1SK1499-2563
PART OF 126-0445 CYLINDER HEAD AS, 126-0441 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@126-0445@@@@@
i00514798 SEBP1876
1265867 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-2713 [6] INSERT-VALVE SEAT (EXHAUST)  
2. 169-6862 [6] INSERT-VALVE SEAT (INLET)  
3. 119-3061 [6] SLEEVE  
4. 8M-5860 [6] PLUG-CUP  
 

Information:

Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Thicker Head Gaskets Available For Use With Resurfaced Cylinder Blocks
1992/10/01
Use Of 4C-4377 Stress Plate Group In 3114 And 3116 Cylinder Block Reconditioning {0672,0673,1201}
1994/09/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation of 7C-6208 Cylinder Sleeve {1222}
Installation of 7C-6208 Cylinder Sleeve {1222}
Usage of Cylinder Head Gaskets{1124}
Usage of Cylinder Head Gaskets{1124}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
Cylinder Block Bore Wear
Cylinder Block Bore Wear
Specifications
Cylinder Block
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Piston Cooling Jet
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Cylinder Block Cover Group
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Main Bearing Journal
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Excessive Bearing Wear - Inspect
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Main Bearings - Inspect
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Troubleshooting
Engine Has Early Wear
3114, 3116 and 3126 Engines
Excessive Engine Oil Consumption
3114, 3116 and 3126 Engines
Disassembly and Assembly
Bearing Clearance - Check
3114, 3116 and 3126 Engines
Piston Cooling Jets - Remove and Install
3114, 3116 and 3126 Engines
Camshaft Bearings - Remove and Install
3114, 3116 and 3126 Engines
Crankshaft Main Bearings - Remove
3114, 3116 and 3126 Engines
Crankshaft Main Bearings - Install
3114, 3116 and 3126 Engines
Service Magazine
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Thicker Head Gaskets Available For Use With Resurfaced Cylinder Blocks{1124}
1992/10/05
Oversize Pistons Not Available{1214,1216}
1993/04/05
Thicker Head Gasket Available For Cylinder Block Salvage Procedure {1124}
1997/12/22

Caterpillar Parts SIS Catalog 3116 :

CYLINDER BLOCK GP
129-1095 CYLINDER BLOCK GP
CYLINDER BLOCK GP
100-4948 CYLINDER BLOCK GP
CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
COVER GP-VALVE MECHANISM
4W-2172 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
4P-3572 COVER GP-VALVE MECHANISM
COVER GP-FRONT HOUSING
7L-0004 COVER GP-FRONT HOUSING
COVER GP-CYLINDER BLOCK
7C-0299 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK GP
7C-5826 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
CYLINDER HEAD AS
107-7609 CYLINDER HEAD AS
CYLINDER HEAD AS
107-7720 CYLINDER HEAD AS
CYLINDER HEAD AS
126-0445 CYLINDER HEAD AS

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QU&#201;BEC, Quebec, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.