AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7W-4812 FASTENER GP-FUEL INJ PUMP PART OF 7E-5812 GOVERNOR GP, 101-3190, 101-3191, 129-1168, 6I-3564, 7E-5813, 7E-5814 GOVERNOR GP-UNIT INJECTOR ALSO AN ATTACHMENT 3116


FUEL SYSTEM
PUMP GP-FUEL INJECTION
LINES GP-FUEL
FILTER GP-FUEL

MARINE ENGINE 3116 MARINE ENGINE 1SK
 3116 Marine Engine 1SK00001-UP SEBP1876 3116 1SK   (1991)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
PUMP GP-FUEL INJECTION
6I-4212 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6I-4212 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6I-4212 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-6193 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-9946 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-9946 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-9946 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-9946 PUMP GP-FUEL INJECTION
 

#SEBP18760220
 

7W-4812: FASTENER GP-FUEL INJ PUMP

7W-4812 FASTENER GP-FUEL INJ PUMP
PART OF 7E-5812 GOVERNOR GP, 101-3190, 101-3191, 129-1168, 6I-3564, 7E-5813, 7E-5814 GOVERNOR GP-UNIT INJECTOR
ALSO AN ATTACHMENT
i00187773 SEBP1876
7W4812 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3872 J [1] SLEEVE  
2. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
3. 6V-5218 M [3] BOLT (M8X1.25X35-MM)  
4. 9Y-5295 [1] TUBE  
5. 6F-6673 [1] SEAL-O-RING  
6. 7C-3839 [1] CLIP-SPRING  
7. 7E-0844 [1] SEAL  
8. 1T-1068 [1] SEAL-O-RING  
  J   INSTALL SLEEVE IN FRONT HOUSING
  M   METRIC PART
 

#SEBP18760221
 

129-0914: FASTENER GP-FUEL LINES

129-0914 FASTENER GP-FUEL LINES
FOR USE WITH RH FUEL LINES AND HEAT EXCHANGER
AN ATTACHMENT
i00541051 SEBP1876
1290914 FASTENER GP-FUEL LINES Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 127-1552 [1] BRACKET  
2. 5P-9297 [1] CLIP (LOOP)  
3. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
4. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
5. 5C-7261 M [1] NUT (M8X1.25-THD)  
  M   METRIC PART
 

#SEBP18760222
 

129-3227: FASTENER GP-FUEL LINES

129-3227 FASTENER GP-FUEL LINES
AN ATTACHMENT
i00494745 SEBP1876
1293227 FASTENER GP-FUEL LINES Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-9297 [1] CLIP (LOOP)  
2. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
3. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
4. 5C-7261 M [1] NUT (M8X1.25-THD)  
  M   METRIC PART
 

#SEBP18760223
 

110-4391: FILTER GP-FUEL

110-4391 FILTER GP-FUEL
FOR USE WITH RH MOUNTED FUEL PRIMING PUMP
AN ATTACHMENT
i00470612 SEBP1876
1104391 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8490 M [1] BOLT (M6X1X25-MM)  
  9X-8267 [1] WASHER (6.6X12X2-MM THK)  
2. 6V-3940 M [2] BOLT (M8X1.25X25-MM)  
3. 5M-5687 [2] CLIP  
4. 6V-5217 M [2] BOLT (M8X1.25X20-MM)  
5. 9M-1974 [13] WASHER-HARD (8.8X16X2-MM THK)  
6. 5P-7970 M [2] NUT (M8X1.25-THD)  
7. 6V-2317 M [4] BOLT (M8X1.25X30-MM)  
8. 7E-8994 [1] BASE AS-FUEL FILTER  
9. 1R-0740 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
10. 030-7947 [1] ADAPTER-ELBOW  
11. 104-3987 [3] CLIP  
12. 7E-9002 [1] TUBE AS-FILTER  
13. 110-4393 [1] TUBE AS  
14. 7E-3735 [1] GASKET  
15. 3K-8460 [1] PLUG (1/2-20-THD)  
  1J-9671 [1] SEAL-O-RING  
16. 6V-8724 [1] ELBOW  
17. 112-5474 [1] STRAP AS  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
18. 7E-5986 [1] BRACKET AS  
19. 3J-1907 [4] SEAL-O-RING  
20. 6V-5215 M [2] BOLT (M8X1.25X16-MM)  
21. 4P-2130 [1] SUPPORT AS  
  8T-2321 M [2] NUT-WELD (M8X1.25-THD)  
22. 6V-9850 [1] ELBOW  
  M   METRIC PART
 

#SEBP18760224
 

1N-3476: FILTER GP-FUEL

1N-3476 FILTER GP-FUEL
S/N 1SK1-1686
i00352102 SEBP1876
1N3476 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 B [4] WASHER-HARD (8.8X16X2-MM THK)  
2. 6V-9607 BM [2] BOLT (M8X1.25X120-MM)  
3. 4W-5158 [1] BASE AS  
  9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
4. 7C-1159 [1] GASKET  
5. 6V-5218 M [2] BOLT (M8X1.25X35-MM)  
6. 1R-0750 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
7. 244-3712 [1] PLUG AS  
7A. 214-7568 [1] SEAL-O-RING  
  9S-4191 [1] PLUG (9/16-18-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP18760225
 

432-4245: FILTER GP-FUEL

432-4245 FILTER GP-FUEL -FUEL, WATER SEPARATOR
FIELD INSTALLATION
i07090618 SEBP1876
4324245 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP18760226
 

432-4247: FILTER GP-FUEL

432-4247 FILTER GP-FUEL -FUEL, WATER SEPARATOR
FIELD INSTALLATION
i07090632 SEBP1876
4324247 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP18760227
 

432-4249: FILTER GP-FUEL

432-4249 FILTER GP-FUEL -FUEL, WATER SEPARATOR
FIELD INSTALLATION
i07090642 SEBP1876
4324249 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP18760228
 

6I-2693: FILTER GP-FUEL

6I-2693 FILTER GP-FUEL
S/N 1SK1687-UP
i00187646 SEBP1876
6I2693 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 B [1] WASHER-HARD (8.8X16X2-MM THK)  
2. 6V-9607 BM [1] BOLT (M8X1.25X120-MM)  
3. 3J-1907 [1] SEAL-O-RING  
4. 7C-1159 [1] GASKET  
5. 6V-5218 M [2] BOLT (M8X1.25X35-MM)  
6. 1R-0751 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
7. 9S-4191 [1] PLUG (9/16-18-THD)  
8. 6I-4802 C [1] BASE AS  
9. 6I-4801 C [1] INSERT-FILTER  
10. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
11. 6V-9607 M [1] BOLT (M8X1.25X120-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP18760229
 

9Y-7694: FILTER GP-FUEL

9Y-7694 FILTER GP-FUEL
RIGHT SIDE MOUNTED FUEL FILTER
AN ATTACHMENT
i00446617 SEBP1876
9Y7694 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3116 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-2299 [1] FILTER AS-FUEL (ADVANCED EFFICIENCY)  
2. 4N-8897 [1] BASE AS-FUEL FILTER  
  9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
3. 6V-2317 M [3] BOLT (M8X1.25X30-MM)  
4. 5P-7970 M [2] NUT (M8X1.25-THD)  
5. 9M-1974 [12] WASHER-HARD (8.8X16X2-MM THK)  
6. 7E-5986 [1] BRACKET AS  
7. 032-1268 [1] CONNECTOR (90-DEG)  
8. 6V-5217 M [2] BOLT (M8X1.25X20-MM)  
9. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
10. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
11. 6V-3940 M [2] BOLT (M8X1.25X25-MM)  
12. 5M-5687 [1] CLIP  
13. 9Y-7691 [1] TUBE AS-FUEL FILTER  
14. 2R-6806 [1] CONNECTOR  
15. 9Y-7692 [1] TUBE AS-FUEL FILTER  
16. 030-8278 [1] UNION-FLARED  
17. 4P-9487 [1] TUBE AS  
18. 104-3987 [3] CLIP  
19. 030-7947 [1] ADAPTER-ELBOW  
20. 3J-1907 [2] SEAL-O-RING  
21. 3K-8460 [1] PLUG (1/2-20-THD)  
  1J-9671 [1] SEAL-O-RING  
22. 7E-3735 [1] GASKET  
23. 5P-8347 M [1] BOLT (M8X1.25X70-MM)  
24. 101-9419 [1] BRACKET AS  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
25. 4P-2130 [1] SUPPORT AS  
26. 6V-5215 M [2] BOLT (M8X1.25X16-MM)  
27. 6T-5600 [1] BOSS  
  M   METRIC PART
 

Information:

Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Fuel Injector Group Rack Movement
1992/05/01
4P6493 Governor Information Plate Available
1992/06/01
Governor Specifications Are Available Through The Technical Information System
1992/09/01
Replacement Governors For Early Engines
1992/10/01
Unit Injector Tip Seal Deterioration
1993/01/01
Low Idle Adjustment (Additional "Buffer" Adjustment Screw Used On Marine Governors
1993/05/01
New Control Assemblies Used In Fuel Injection Control Groups
1993/12/01
Mechanical Unit Injector Identification Code {1290}
1995/12/20
Fuel Injector Sleeve Replacement Tooling{0703,1125}
1996/02/16
New Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/16
New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines{1264,1265}
1996/07/22
New Service Tool Calibration Pins For Mechanical Goverened Engines{1264,1265}
1996/07/22
Governor Shimming Is Determined By The Governor Test Bench Calibration{1264,1289}
1996/07/22
Replacing The Shutoff Assembly In Engines With Older Governors{1264,1289}
1996/07/22
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/22
Low Idle Adjustment, Additional "Buffer" Spring Adjustment Screw Used On Marine Governors{1264}
1997/04/01
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/23
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/04/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Use 170-9227 Reamer Shims To Aid In Reaming 3100 Engine Injector Sleeves {1250}
1999/03/01
New 173-1530 Injector Seating Tool Group Available{0710,1290}
1999/09/01
High Efficiency Orifice (HEO) Fuel Injectors Are Now Used For Service Repairs {1290}
2000/07/01
Do Not Reuse the Hold Down Bolts for the Fuel Injector {1290}
2006/05/29
Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/05/19
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Injectors Should Not Be Tested for Proper Operation Prior to Being Installed Into the Engine {1251, 1290}
2009/02/23
Operation and Maintenance Manual
Fuel Injection Timing - Check
3116 and 3126 Marine Engines
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Installing Injectors on the 3116, 3116T, and 3126 Industrial Engines{1290}
Installing Injectors on the 3116, 3116T, and 3126 Industrial Engines{1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-CFEL
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Unit Injector
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Unit Injector Mechanism
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Tool Operating Manual
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Service Letter-China
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Information Release Memo
CATERPILLAR REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN MECHANICAL UNIT FUEL INJECTORS
CATERPILLAR REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN MECHANICAL UNIT FUEL INJECTORS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Unit Injector - Test
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Fuel Timing Dimension - Adjust
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Unit Injector - Adjust
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Unit Injector Synchronization - Adjust
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Troubleshooting
Unit Injector Cranking Rack Position
3114, 3116 and 3126 Engines
Unit Injector Misfire
3114, 3116 and 3126 Engines
Unit Injector
3114, 3116 and 3126 Engines
Disassembly and Assembly
Unit Injector - Remove
3114, 3116 and 3126 Engines
Unit Injector - Install
3114, 3116 and 3126 Engines
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Use Correct Calibration Pin (1U9786) When Calibrating Governor; Do Not Use 1U7305 Insertion Tool{0706,0782,1264}
1989/11/06
Fuel Injector Group Rack Movement{1290}
1992/05/18
4P6493 Governor Information Plate Available{7557}
1992/06/15
Governor Specifications Are Available Through The Technical Information System{1264,0374}
1992/09/07
Replacement Governors For Early Engines{1264}
1992/11/09
Unit Injector Tip Seal Deterioration {1290}
1993/01/25
Low Idle Adjustment, Additional "Buffer" Adjustment Screw Used On Marine Governors {1264}
1993/06/14
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17
128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}
1997/01/27
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
Pull the Injector Sleeve with a 139-0692 Sleeve Jaw {0706, 1713}
2000/04/17
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01

Caterpillar Parts SIS Catalog 3116 :

DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
7E-4665 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
6I-2621 DRIVE GP-GOV & TRANSFER PUMP
COOLER GP-FUEL
4P-9822 COOLER GP-FUEL
COOLER GP-FUEL
119-2169 COOLER GP-FUEL
CONTROL GP-GOVERNOR
7E-5353 CONTROL GP-GOVERNOR
CONTROL GP-FUEL INJECTION
7W-6989 CONTROL GP-FUEL INJECTION
CONTROL GP-FUEL INJECTION
105-1695 CONTROL GP-FUEL INJECTION
FASTENER GP-FUEL LINES
129-0914 FASTENER GP-FUEL LINES
FASTENER GP-FUEL LINES
129-3227 FASTENER GP-FUEL LINES
FILTER GP-FUEL
110-4391 FILTER GP-FUEL
FILTER GP-FUEL
1N-3476 FILTER GP-FUEL
FILTER GP-FUEL
432-4245 FILTER GP-FUEL
FILTER GP-FUEL
432-4247 FILTER GP-FUEL
FILTER GP-FUEL
432-4249 FILTER GP-FUEL
FILTER GP-FUEL
6I-2693 FILTER GP-FUEL

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QUÉBEC, Quebec, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.