AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6I-0230 GOVERNOR GP S/N 7SF9977-19179 PART OF 4P-2206, 7E-4080 GOVERNOR GP-UNIT INJECTOR 3116 TRUCK ENGINE


FUEL SYSTEM
GOVERNOR GP

TRUCK ENGINE 3116 TRUCK ENGINE 7SF
 3116 Truck Engine--ATAAC 7SF00001-UP SEBP1878 3116 7SF   (1989)

FUEL SYSTEM

GOVERNOR GP
DRIVE GP-GOV & TRANSFER PUMP
7W-8179 DRIVE GP-GOV & TRANSFER PUMP
GOVERNOR GP
4P-1583 GOVERNOR GP
GOVERNOR GP
6I-0230 GOVERNOR GP
GOVERNOR GP-UNIT INJECTOR
4P-2206 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-2557 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-2557 GOVERNOR GP-UNIT INJECTOR
 

#SEBP18780250
 

6I-0230: GOVERNOR GP

6I-0230 GOVERNOR GP
S/N 7SF9977-19179
PART OF 4P-2206, 7E-4080 GOVERNOR GP-UNIT INJECTOR
i00167649 SEBP1878
6I0230 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 7C-8974 [1] CLEVIS AS  
3. 4H-1641 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 4P-4985 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 7W-7362 [1] PISTON-GOVERNOR SERVO  
10. 4P-4983 [1] SLEEVE  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 7E-5785 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 7E-3215 [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER-FULCRUM  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN-SPRING  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 7C-6592 [1] ARBOR AS-TORQUE CAM  
24. 8C-6775 M [1] SETSCREW-SOCKET  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING AS-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5743 [1] LEVER AS-LIMIT  
32. Z [1] PIN  
33. Z [1] LEVER-TORQUE  
34. 8T-8895 M [1] SETSCREW-SOCKET (M4X0.7X16-MM)  
35. 4W-6630 [1] LEVER  
36. 7W-5614 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
38. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
39. [1] HOUSING AS-REAR  
40. Z [1] SHAFT-LEVER  
41. Z [1] PLUG  
42. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
43. 5C-2874 M [3] NUT (M5X0.8-THD)  
44. 7C-6204 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
48. 6V-5683 M [1] BOLT (M6X1X16-MM)  
49. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
50. 9X-6002 M [1] SETSCREW  
51. 7C-4483 [1] SCREEN AS (OIL INLET)  
52. 6V-5100 [1] SEAL-O-RING  
53. 7C-6250 [1] COVER AS  
54. Z [1] PLUG  
55. 4W-6010 [1] CLAMP  
56. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
57. 6I-0232 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
64. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
65. 7C-5541 [2] PLATE  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM (0.12-MM THK)  
71. 4P-7842 [1] RISER  
72. 4P-7843 [1] SEAT AS-SPRING  
73. Z [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM (0.25-MM THK)  
80. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
81. 4P-4000 [1] SPRING-LEVER  
82. 5C-8312 M [1] NUT (M4X0.7-THD)  
83. 5M-2057 [1] SEAL-O-RING  
84. 4P-3537 [1] RING-TOLERANCE  
85. 4P-3539 [1] LEVER-THROTTLE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBP18780251
 

4P-2206: GOVERNOR GP-UNIT INJECTOR

4P-2206 GOVERNOR GP-UNIT INJECTOR
S/N 7SF15129-19179
FIELD REPLACEMENT FOR @@@@@ 4P-2557@@@@@
FIELD INSTALLATION
i00374514 SEBP1878
4P2206 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Y [1] GOVERNOR GP  
2. 4P-2224 [1] CAM-TORQUE  
3. 4P-8745 [1] SPRING GP  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 4P-5617 [1] CONTROL AS-FUEL RATIO  
  7C-5599 [1] WASHER  
  7W-1691 [1] WASHER (19.15X35X3-MM THK)  
  7W-5324 [1] BEARING  
  8T-5447 [1] RING-RETAINING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP18780252
 

4P-2557: GOVERNOR GP-UNIT INJECTOR

4P-2557 GOVERNOR GP-UNIT INJECTOR
S/N 7SF1-15128
PART OF 4P-2989, 7E-5270 GOVERNOR GP-UNIT INJECTOR
FIELD REPLACEMENT ORDER @@@@@ 4P-2206@@@@@
i00374735 SEBP1878
4P2557 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-1583 Y [1] GOVERNOR GP  
2. 4P-2464 [1] CAM-TORQUE  
3. 9Y-4027 [1] SPRING GP  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 7W-5634 [1] CONTROL AS-FUEL RATIO  
  Y   SEPARATE ILLUSTRATION
 

#SEBP18780253
 

4P-2557: GOVERNOR GP-UNIT INJECTOR

4P-2557 GOVERNOR GP-UNIT INJECTOR
S/N 7SF15129-19179
PART OF 4P-2989 GOVERNOR GP-UNIT INJECTOR
FIELD REPLACEMENT ORDER @@@@@ 4P-2206@@@@@
i00374736 SEBP1878
4P2557 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-4776 CY [1] GOVERNOR GP-UNIT INJECTOR  
2. 4P-4358 C [1] CAM-TORQUE  
3. 9Y-4027 [1] SPRING GP  
  4P-5605 [1] SHIM (0.5-MM THK)  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 7W-5634 [1] CONTROL AS-FUEL RATIO  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP18780254
 

4P-2989: GOVERNOR GP-UNIT INJECTOR

4P-2989 GOVERNOR GP-UNIT INJECTOR
S/N 7SF9436-19179
i00375349 SEBP1878
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
  4P-2557 Y [1] GOVERNOR GP-UNIT INJECTOR  
  7W-8434 Y [1] LINES GP-GOVERNOR OIL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP18780255
 

4P-4776: GOVERNOR GP-UNIT INJECTOR

4P-4776 GOVERNOR GP-UNIT INJECTOR
S/N 7SF15129-19179
PART OF 4P-2557 GOVERNOR GP-UNIT INJECTOR
i00167563 SEBP1878
4P4776 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 7C-8974 [1] CLEVIS AS  
3. 4H-1641 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 7W-7363 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 7W-7362 [1] PISTON-GOVERNOR SERVO  
10. 4P-4983 [1] SLEEVE  
11. 9Y-1837 [1] SPRING  
12. 8T-5447 [1] RING-RETAINING  
13. 7E-5785 [1] SLEEVE-LIMITING  
14. 8T-7060 [1] RING-RETAINING  
15. 7C-0797 [1] LEVER AS-SHAFT  
  Z [1] LEVER  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 7C-6592 [1] ARBOR AS-TORQUE CAM  
24. 8C-6775 M [1] SETSCREW-SOCKET  
25. 7W-5608 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING AS-NEEDLE  
27. 7W-5560 [1] LEVER AS-RISER  
  Z [1] LEVER  
28. Z [1] SWIVEL  
29. 8C-8580 M [2] BOLT-SOCKET HEAD (M5X0.8X16-MM)  
30. 3P-3547 [1] RING-RETAINING  
31. 7E-5784 [1] LEVER AS-LIMIT  
32. Z [1] PIN  
33. Z [1] LEVER-TORQUE  
34. 8T-8895 M [1] SETSCREW-SOCKET (M4X0.7X16-MM)  
35. 4W-6630 [1] LEVER  
36. 7W-5614 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
38. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
39. 7W-8181 [1] HOUSING AS-REAR  
40. Z [1] SHAFT  
41. Z [1] PLUG  
42. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
43. 3C-6970 M [3] NUT (M5X0.8-THD)  
44. 7C-6204 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
48. 6V-5683 M [1] BOLT (M6X1X16-MM)  
49. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
50. 9X-6002 M [1] SETSCREW  
51. 7C-4483 [1] SCREEN AS (OIL INLET)  
52. 6V-5100 [1] SEAL-O-RING  
53. 7C-6250 [1] COVER AS  
54. Z [1] PLUG  
55. 4W-6010 [1] CLAMP  
56. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
57. 4P-4775 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
64. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
65. 7C-5541 [2] PLATE  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM (0.12-MM THK)  
71. 7W-5583 [1] RISER  
72. 7C-2421 [1] SEAT AS-SPRING  
73. Z [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM (0.25-MM THK)  
80. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
81. 7W-9527 [1] SPRING-TORSION  
82. 5C-8312 M [1] NUT (M4X0.7-THD)  
83. 5M-2057 [1] SEAL-O-RING  
84. 9X-2315 [1] RING-RETAINING  
85. 4P-5605 B [1] SHIM (0.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBP18780256
 

4P-5501: GOVERNOR GP-UNIT INJECTOR

4P-5501 GOVERNOR GP-UNIT INJECTOR
S/N 7SF9977-11480
PART OF 4P-5506 GOVERNOR GP-UNIT INJECTOR
i00384097 SEBP1878
4P5501 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 4P-5676 [1] CLEVIS  
3. 4H-1641 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 4P-4985 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 7W-7362 [1] PISTON-GOVERNOR SERVO  
10. 4P-4983 [1] SLEEVE  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 7E-5785 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 7E-3215 [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 7C-6592 [1] ARBOR AS-TORQUE CAM  
24. 8C-6775 M [1] SETSCREW-SOCKET  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING AS-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5743 [1] LEVER AS-LIMIT  
32. Z [1] SHAFT  
33. Z [1] PLUG  
34. 8T-8895 M [1] SETSCREW-SOCKET (M4X0.7X16-MM)  
35. 4W-6630 [1] LEVER  
36. 7W-5614 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
38. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
39. 4P-5157 [1] HOUSING AS-GOVERNOR  
42. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
43. 5C-2874 M [3] NUT (M5X0.8-THD)  
44. 7C-6204 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
48. 6V-5683 M [1] BOLT (M6X1X16-MM)  
49. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
50. 9X-6002 M [1] SETSCREW  
51. 7C-4483 [1] SCREEN AS (OIL INLET)  
52. 6V-5100 [1] SEAL-O-RING  
53. 4P-4231 [1] COVER-REAR  
54. Z [1] PLUG  
55. 4W-6010 [1] CLAMP  
56. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
57. Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
64. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
65. 7C-5541 [2] PLATE  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM (0.12-MM THK)  
71. 4P-8947 [1] RISER  
72. 4P-8948 [1] SEAT AS-SPRING  
73. Z [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM (0.25-MM THK)  
80. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
81. 4P-4000 [1] SPRING-LEVER  
82. 5C-8312 M [1] NUT (M4X0.7-THD)  
83. 5M-2057 [1] SEAL-O-RING  
84. 4P-3537 [1] RING-TOLERANCE  
85. 4P-3539 [1] LEVER-THROTTLE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBP18780257
 

4P-5506: GOVERNOR GP-UNIT INJECTOR

4P-5506 GOVERNOR GP-UNIT INJECTOR
S/N 7SF9977-11480
PART OF 7E-5270 GOVERNOR GP-UNIT INJECTOR
ALSO FIELD INSTALLATION
i00384112 SEBP1878
4P5506 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 4P-4358 [1] CAM-TORQUE  
3. 4P-8745 [1] SPRING GP  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 4P-5746 [1] CONTROL AS-FUEL RATIO  
  6I-1564 [1] DIAPHRAGM  
  7C-5599 [1] WASHER  
  7W-1691 [1] WASHER (19.15X35X3-MM THK)  
  7W-5324 [1] BEARING  
  [1] PLATE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP18780258
 

7C-4176: GOVERNOR GP-UNIT INJECTOR

7C-4176 GOVERNOR GP-UNIT INJECTOR
S/N 7SF1-19179
185 BHP. LOW TORQUE RISE
PART OF 7E-5606 GOVERNOR GP-UNIT INJECTOR
FOR USE WITH AUTOMATIC TRANSMISSION
i00406466 SEBP1878
7C4176 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-1673 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 7E-5863 [1] CAM-TORQUE  
3. 9Y-4027 [1] SPRING GP  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 7W-5634 [1] CONTROL AS-FUEL RATIO  
  Y   SEPARATE ILLUSTRATION
 

#SEBP18780259
 

7E-0001: GOVERNOR GP-UNIT INJECTOR

7E-0001 GOVERNOR GP-UNIT INJECTOR
S/N 7SF1-19179
PART OF 7E-5273 GOVERNOR GP-UNIT INJECTOR
FOR USE WITH 250 HP
i00395622 SEBP1878
7E0001 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-1673 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 7E-5863 [1] CAM-TORQUE  
3. 9Y-4027 [1] SPRING GP  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 7E-3947 [1] CONTROL AS-RATIO  
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/23
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
New Shim Improves Low Idle Stability Of Governor
1990/11/01
Be Sure To Remove All Air From The Fuel System On A Truck That Has Run Out Of Fuel, Had The Fuel Filter Changed, Or Had The Governor Removed{1250,1256,1261,1264,1274}
1991/03/01
Larger O-ring Seal Available For Oil Supply Port In Governor Housing
1991/05/01
4P6493 Governor Information Plate Available
1992/06/01
Governor Specifications Are Available Through The Technical Information System
1992/09/01
Replacement Governors For Early Engines
1992/11/01
Measuring "Dynamic Rack" Of Unit Injectors
1993/06/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Governor Shimming Is Determined By The Governor Test Bench Calibration{1264,1289}
1996/07/30
Replacing The Shutoff Assembly In Engines With Older Governors{1264,1289}
1996/07/30
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/30
Engine News
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Operation and Maintenance Manual
Fuel Inlet Screen - Clean/Inspect/Replace
3116 Truck Engine
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE GOVERNORS ON CERTAIN 3116 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE GOVERNORS ON CERTAIN 3116 TRUCK ENGINES
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE GOVERNORS ON CERTAIN 3116 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE GOVERNORS ON CERTAIN 3116 TRUCK ENGINES
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Specifications
Governor
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Fuel Transfer Pump
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Governor
3116 Truck Engines
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Information Release Memo
REMANUFACTURED GOVERNORS FOR VARIOUS 3114 AND 3116 INDUSTRIAL, MACHINE, MARINE AND ON-HIGHWAY TRUCK APPLICATIONS
REMANUFACTURED GOVERNORS FOR VARIOUS 3114 AND 3116 INDUSTRIAL, MACHINE, MARINE AND ON-HIGHWAY TRUCK APPLICATIONS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Governor - Adjust
3116 Truck Engine
Troubleshooting
Governor Instability
3114, 3116 and 3126 Engines
Disassembly and Assembly
Governor And Fuel Transfer Pump
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Unit Fuel Injectors
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Governor - Install
3116 On Highway Engines
Governor - Remove
3116 On Highway Engines
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Use Correct Calibration Pin (1U9786) When Calibrating Governor; Do Not Use 1U7305 Insertion Tool{0706,0782,1264}
1989/11/06
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
Engine Rack Control Assemblies Improved {1257}
1990/07/02
New Fuel Setting Screw Cover And Bolt {1257}
1990/07/02
Setscrew And Nut Available For Fuel Setting And Injector Synchronization {1257}
1990/10/22
New Shim Improves Low Idle Stability Of Governor{1265,1256}
1990/11/26
Be Sure To Remove All Air From The Fuel System On A Truck That Has Run Out Of Fuel, Had The Fuel Filter Changed, Or Had The Governor Removed{1250,1256,1261,1264,1274}
1991/02/18
Larger O-ring Seal Available For Oil Supply Port In Governor Housing{1264}
1991/05/13
Be Sure To Use Correct Connector/Connectors Between Fuel Transfer Pump Outlet And Tube To Fuel Filter{1274,1256}
1992/02/24
4P6493 Governor Information Plate Available{7557}
1992/06/15
Governor Specifications Are Available Through The Technical Information System{1264,0374}
1992/09/07
Replacement Governors For Early Engines{1264}
1992/11/09
Measuring "Dynamic Rack" Of Unit Injectors{0780}
1993/06/21
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17

Caterpillar Parts SIS Catalog 3116 :

GOVERNOR GP
4P-1583 GOVERNOR GP
FILTER GP-FUEL
1N-3476 FILTER GP-FUEL
FILTER & LINES GP-FUEL
7E-0589 FILTER & LINES GP-FUEL
FILTER & LINES GP-FUEL
7E-0589 FILTER & LINES GP-FUEL
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
DRIVE GP-GOV & TRANSFER PUMP
7W-8179 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
6I-0232 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
4P-5614 DRIVE GP-GOV & TRANSFER PUMP
GOVERNOR GP-UNIT INJECTOR
4P-2206 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-2557 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-2557 GOVERNOR GP-UNIT INJECTOR
4P-2989 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-4776 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5501 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5506 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
7C-4176 GOVERNOR GP-UNIT INJECTOR

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QUÉBEC, Quebec, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.