AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3116 Truck Engine--ATAAC 7SF00001-UP BASIC ENGINE Caterpillar SIS



TRUCK ENGINE 3116 TRUCK ENGINE 7SF
 3116 Truck Engine--ATAAC 7SF00001-UP SEBP1879 3116 7SF   (1989)

Parts group 3116:

  For full view, you need register
BASIC ENGINE
ADAPTER GP-ENGINE TO XMSN
ADAPTER GP-ENGINE TO XMSN
7E-3580 ADAPTER GP-ENGINE TO XMSN
7E-3580 ADAPTER GP-ENGINE TO XMSN
S/N 7SF1-19179
ALSO AN ATTACHMENT
AIR COMPRESSOR GP
AIR COMPRESSOR AS
4P-5433 AIR COMPRESSOR AS
4P-5433 AIR COMPRESSOR AS
S/N 7SF7439-19149
PART OF 9Y-8061 AIR COMPRESSOR GP
ALSO AN ATTACHMENT
AIR COMPRESSOR AS
4P-5435 AIR COMPRESSOR AS
4P-5435 AIR COMPRESSOR AS
13.2 CFM AT 1250 RPM. TU-FLO 550
PART OF 4P-0596 AIR COMPRESSOR GP
AN ATTACHMENT
159-9774 AIR COMPRESSOR GP
159-9774 AIR COMPRESSOR GP
FOR USE WITH JAKE BRAKE
FIELD INSTALLATION
AIR COMPRESSOR GP
4P-0595 AIR COMPRESSOR GP
4P-0595 AIR COMPRESSOR GP
13.2 CFM AT 1250 RPM. TU-FLO 550
FOR USE WITH @@@@@ 7E-7598@@@@@, @@@@@ 4P-0564@@@@@
CANNOT BE USED WITH @@@@@ 9Y-6686@@@@@
AN ATTACHMENT
AIR COMPRESSOR GP
4P-0596 AIR COMPRESSOR GP
4P-0596 AIR COMPRESSOR GP
13.2 CFM AT 1250 RPM. TU-FLO 550
PART OF 4P-0595 AIR COMPRESSOR GP
AN ATTACHMENT
AIR COMPRESSOR GP
4P-2132 AIR COMPRESSOR GP
4P-2132 AIR COMPRESSOR GP
S/N 7SF6555-17563
12 CFM AT 1250 RPM. TU-FLO 501
FOR USE WITH @@@@@ 7E-5198@@@@@, @@@@@ 4P-0564@@@@@, @@@@@ 9Y-7248@@@@@, @@@@@ 7E-3716@@@@@
AIR COMPRESSOR GP
4P-2132 AIR COMPRESSOR GP
4P-2132 AIR COMPRESSOR GP
S/N 7SF17564-19179
12 CFM AT 1250 RPM. TU-FLO 501
FOR USE WITH @@@@@ 7E-5198@@@@@, @@@@@ 4P-0564@@@@@, @@@@@ 9Y-7248@@@@@, @@@@@ 7E-3716@@@@@
AIR COMPRESSOR GP
4P-2133 AIR COMPRESSOR GP
4P-2133 AIR COMPRESSOR GP
S/N 7SF6555-19179
12 CFM AT 1250 RPM. TU-FLO 501
PART OF 4P-2132 AIR COMPRESSOR GP
AIR COMPRESSOR GP
9Y-5722 AIR COMPRESSOR GP
9Y-5722 AIR COMPRESSOR GP
S/N 7SF1-19179
12 CFM AT 1250 RPM. TU-FLO 501
PART OF 9Y-7247 AIR COMPRESSOR GP
ALSO AN ATTACHMENT
AIR COMPRESSOR GP
9Y-7247 AIR COMPRESSOR GP
9Y-7247 AIR COMPRESSOR GP
S/N 7SF1-7199
12 CFM AT 1250 RPM. TU-FLO 501
ALSO AN ATTACHMENT
AIR COMPRESSOR GP
9Y-7247 AIR COMPRESSOR GP
9Y-7247 AIR COMPRESSOR GP
S/N 7SF7200-17500
12 CFM AT 1250 RPM. TU-FLO 501
ALSO AN ATTACHMENT
AIR COMPRESSOR GP
9Y-7247 AIR COMPRESSOR GP
9Y-7247 AIR COMPRESSOR GP
S/N 7SF17501-19179
12 CFM AT 1250 RPM. TU-FLO 501
ALSO AN ATTACHMENT
AIR COMPRESSOR GP
9Y-7249 AIR COMPRESSOR GP
9Y-7249 AIR COMPRESSOR GP
S/N 7SF1-7438
9.5 CFM AT 1250 RPM. BX 2150
ALSO AN ATTACHMENT
AIR COMPRESSOR GP
9Y-7249 AIR COMPRESSOR GP
9Y-7249 AIR COMPRESSOR GP
S/N 7SF7439-19179
9.5 CFM AT 1250 RPM. BX 2150
ALSO AN ATTACHMENT
AIR COMPRESSOR GP
9Y-8061 AIR COMPRESSOR GP
9Y-8061 AIR COMPRESSOR GP
S/N 7SF1-19149
9.5 CFM AT 1250 RPM. BX 1250
PART OF 9Y-7249 AIR COMPRESSOR GP
ALSO AN ATTACHMENT
AIR COMPRESSOR GP
9Y-9943 AIR COMPRESSOR GP
9Y-9943 AIR COMPRESSOR GP
S/N 7SF1-19179
12 CFM AT 1250 RPM. TU-FLO 501
PART OF 4P-2133, 9Y-5722 AIR COMPRESSOR GP
ALSO AN ATTACHMENT
LINES GP-AIR COMPRESSOR
4P-0592 LINES GP-AIR COMPRESSOR
4P-0592 LINES GP-AIR COMPRESSOR
FOR USE WITH MULTI-POSITION FAN DRIVE
AN ATTACHMENT
LINES GP-AIR COMPRESSOR
7E-3716 LINES GP-AIR COMPRESSOR
7E-3716 LINES GP-AIR COMPRESSOR
S/N 7SF6555-19179
FOR USE WITH @@@@@ 9Y-7247@@@@@, MULTI-POSITION FAN DRIVE
ALSO AN ATTACHMENT
LINES GP-AIR COMPRESSOR
9Y-7248 LINES GP-AIR COMPRESSOR
9Y-7248 LINES GP-AIR COMPRESSOR
S/N 7SF1-19179
FOR USE WITH @@@@@ 9Y-7247@@@@@, @@@@@ 9Y-8703@@@@@, FIXED POSITION FAN DRIVE
ALSO AN ATTACHMENT
LINES GP-AIR COMPRESSOR
9Y-7255 LINES GP-AIR COMPRESSOR
9Y-7255 LINES GP-AIR COMPRESSOR
S/N 7SF1-19179
FOR USE WITH @@@@@ 9Y-7249@@@@@, @@@@@ 9Y-8703@@@@@, FIXED POSITION FAN DRIVE
ALSO AN ATTACHMENT
BELT TIGHTENER GP
BELT TENSIONER
7E-0339 BELT TENSIONER
7E-0339 BELT TENSIONER
FOR USE WITH ALTERNATOR
AN ATTACHMENT
BELT TENSIONER
7E-3999 BELT TENSIONER
7E-3999 BELT TENSIONER
FOR USE WITH @@@@@ 9Y-8703@@@@@, @@@@@ 9Y-6682@@@@@, FIXED POSITION FAN DRIVE, FREON COMPRESSOR
AN ATTACHMENT
BELT TENSIONER GP
4P-2434 BELT TENSIONER GP
4P-2434 BELT TENSIONER GP
S/N 7SF6555-10927
BELT TENSIONER GP
4P-2434 BELT TENSIONER GP
4P-2434 BELT TENSIONER GP
S/N 7SF10928-19179
ENGINE BRAKE GP
143-6479 KIT-ENGINE BRAKE
143-6479 KIT-ENGINE BRAKE
FIELD INSTALLATION
159-9758 LINES GP-EXHAUST BRAKE
159-9758 LINES GP-EXHAUST BRAKE
PART OF 159-9774 AIR COMPRESSOR GP
CAMSHAFT GP
CAMSHAFT GP
2W-9608 CAMSHAFT GP
2W-9608 CAMSHAFT GP
S/N 7SF1-19179
COMPRESSOR GP-REFRIGERANT
MOUNTING GP-REFRIGERANT COMPR
9Y-7252 MOUNTING GP-REFRIGERANT COMPR
9Y-7252 MOUNTING GP-REFRIGERANT COMPR
PROVIDES BELT TENSIONER
FOR USE WITH 7-GROOVE CRANKSHAFT PULLEY
AN ATTACHMENT
CRANKSHAFT GP
CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
SEAL GP-CRANKSHAFT
4W-1016 SEAL GP-CRANKSHAFT
4W-1016 SEAL GP-CRANKSHAFT
S/N 7SF1-19179
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
4P-0563 COVER GP-CYLINDER BLOCK
4P-0563 COVER GP-CYLINDER BLOCK
S/N 7SF6555-19179
COVER GP-CYLINDER BLOCK
4P-0564 COVER GP-CYLINDER BLOCK
4P-0564 COVER GP-CYLINDER BLOCK
S/N 7SF6555-19179
FOR USE WITH AIR COMPRESSOR
COVER GP-CYLINDER BLOCK
7E-7598 COVER GP-CYLINDER BLOCK
7E-7598 COVER GP-CYLINDER BLOCK
S/N 7SF1-19179
FOR USE WITH @@@@@ 9Y-7247@@@@@, @@@@@ 9Y-7249@@@@@, @@@@@ 4P-0595@@@@@
ALSO AN ATTACHMENT
COVER GP-CYLINDER BLOCK
7E-7908 COVER GP-CYLINDER BLOCK
7E-7908 COVER GP-CYLINDER BLOCK
FOR USE WITH SIDE COVER OPENING
CANNOT BE USED WITH LEFT SIDE OIL FILL
AN ATTACHMENT
COVER GP-CYLINDER BLOCK
9Y-6690 COVER GP-CYLINDER BLOCK
9Y-6690 COVER GP-CYLINDER BLOCK
S/N 7SF1-18557
CANNOT BE USED WITH AIR COMPRESSOR
ALSO AN ATTACHMENT
COVER GP-CYLINDER BLOCK
9Y-6690 COVER GP-CYLINDER BLOCK
9Y-6690 COVER GP-CYLINDER BLOCK
S/N 7SF18558-19179
CANNOT BE USED WITH AIR COMPRESSOR
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
S/N 7SF1-19179
FOR USE WITH ONE-PIECE PISTONS
CYLINDER BLOCK GP
7C-5826 CYLINDER BLOCK GP
7C-5826 CYLINDER BLOCK GP
S/N 7SF1-19179
PART OF 2W-9746, 7E-2482 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
S/N 7SF1-19179
FOR USE WITH TWO-PIECE PISTONS
CYLINDER HEAD GP
CYLINDER HEAD GP
6I-2121 CYLINDER HEAD GP
6I-2121 CYLINDER HEAD GP
S/N 7SF1-19179
AIR COMPRESSOR
PART OF 9Y-9943 AIR COMPRESSOR GP
ALSO AN ATTACHMENT
CYLINDER HEAD GP
9Y-8850 CYLINDER HEAD GP
9Y-8850 CYLINDER HEAD GP
S/N 7SF1-19179
NON-SWIRL
PART OF 9Y-8871 CYLINDER HEAD GP
CYLINDER HEAD GP
9Y-8871 CYLINDER HEAD GP
9Y-8871 CYLINDER HEAD GP
S/N 7SF1-19179
NON-SWIRL
DAMPER GP
DAMPER & PULLEY GP
4P-3188 DAMPER & PULLEY GP
4P-3188 DAMPER & PULLEY GP
FOR USE WITH 8 GROOVE POLY RIB BELT
AN ATTACHMENT
DAMPER & PULLEY GP
7E-8437 DAMPER & PULLEY GP
7E-8437 DAMPER & PULLEY GP
304.8MM DIAMETER SOLID DAMPER
FOR USE WITH 8 GROOVE POLY RIB BELT
AN ATTACHMENT
DAMPER & PULLEY GP
9Y-6682 DAMPER & PULLEY GP
9Y-6682 DAMPER & PULLEY GP
S/N 7SF1-19179
304.8MM DIAMETER SOLID DAMPER
DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
7E-1317 DRIVE GP-ACCESSORY
7E-1317 DRIVE GP-ACCESSORY
ROTATION IS COUNTER-CLOCKWISE VIEWED FROM DRIVE END OF PUMP.
FOR USE WITH SAE B HYDRAULIC PUMP WITH STRAIGHT SHAFT
CANNOT BE USED WITH AIR COMPRESSOR
AN ATTACHMENT
DRIVE GP-ACCESSORY
7E-8692 DRIVE GP-ACCESSORY
7E-8692 DRIVE GP-ACCESSORY
FOR USE WITH SAE "A" HYDRAULIC PUMP
CANNOT BE USED WITH AIR COMPRESSOR
AN ATTACHMENT
DRIVE GP-AUXILIARY
ADAPTER GP-AUXILIARY DRIVE
7E-6289 ADAPTER GP-AUXILIARY DRIVE
7E-6289 ADAPTER GP-AUXILIARY DRIVE
FRONT PTO
AN ATTACHMENT
DRIVE GP-FAN
DRIVE GP-FAN
4P-2436 DRIVE GP-FAN
4P-2436 DRIVE GP-FAN
S/N 7SF6555-19179
DRIVE GP-FAN
7E-6291 DRIVE GP-FAN
7E-6291 DRIVE GP-FAN
0.8:1 RATIO. MULTI-POSITION
FOR USE WITH 7 GROOVE "K SECTION" POLY RIB BELT
AN ATTACHMENT
DRIVE GP-FAN
7E-6292 DRIVE GP-FAN
7E-6292 DRIVE GP-FAN -BELT
1.0:1 RATIO. MULTI-POSITION
FOR USE WITH 7 GROOVE "K SECTION" POLY RIB BELT
AN ATTACHMENT
DRIVE GP-FAN
9Y-8703 DRIVE GP-FAN
9Y-8703 DRIVE GP-FAN
S/N 7SF1-19179
1.15:1 RATIO. FIXED 420MM HEIGHT
FOR USE WITH @@@@@ 9Y-6682@@@@@, 7 GROOVE POLY RIB BELT
ALSO AN ATTACHMENT
DRIVE GP-PUMP
DRIVE GP-WATER PUMP
7C-6998 DRIVE GP-WATER PUMP
7C-6998 DRIVE GP-WATER PUMP
S/N 7SF1-19179
BELT
FLYWHEEL GP
ADAPTER GP-ENGINE TO XMSN
7E-3580 ADAPTER GP-ENGINE TO XMSN
7E-3580 ADAPTER GP-ENGINE TO XMSN
S/N 7SF1-19179
ALSO AN ATTACHMENT
FLYWHEEL GP
9Y-6706 FLYWHEEL GP
9Y-6706 FLYWHEEL GP
S/N 7SF1-19179
FOR USE WITH SAE NO.2 FLYWHEEL HOUSING OR 14 INCH SINGLE PLATE CLUTCH
GEAR GP
GEAR GP-FRONT
2W-8475 GEAR GP-FRONT
2W-8475 GEAR GP-FRONT
S/N 7SF1-19179
HOUSING GP-FRONT
7L-0002 HOUSING GP-FRONT
7L-0002 HOUSING GP-FRONT
S/N 7SF1-9976
HOUSING GP-FRONT
7L-0002 HOUSING GP-FRONT
7L-0002 HOUSING GP-FRONT
S/N 7SF9977-19179
HOUSING GP-FLYWHEEL
ADAPTER GP-ENGINE TO XMSN
7E-3580 ADAPTER GP-ENGINE TO XMSN
7E-3580 ADAPTER GP-ENGINE TO XMSN
S/N 7SF1-19179
ALSO AN ATTACHMENT
HOUSING GP-FLYWHEEL
7E-0003 HOUSING GP-FLYWHEEL
7E-0003 HOUSING GP-FLYWHEEL
S/N 7SF6555-19179
PROVIDES SAE NO.2 FLYWHEEL HOUSING WITH STARTING MOTOR MOUNTING FLANGE ON LH SIDE
HOUSING GP-FLYWHEEL
7E-7628 HOUSING GP-FLYWHEEL
7E-7628 HOUSING GP-FLYWHEEL
FOR USE WITH SPACER-LESS TRANSMISSION
AN ATTACHMENT
HOUSING GP-FLYWHEEL
9Y-6683 HOUSING GP-FLYWHEEL
9Y-6683 HOUSING GP-FLYWHEEL
S/N 7SF1-19179
PROVIDES SAE NO. 2 FLYWHEEL HOUSING WITH STARTING MOTOR MOUNTING FLANGE ON RIGHT HAND SIDE
ALSO AN ATTACHMENT
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
4P-0599 COVER GP-FRONT HOUSING
4P-0599 COVER GP-FRONT HOUSING
S/N 7SF6555-19179
FOR USE WITH @@@@@ 4P-2132@@@@@
ALSO AN ATTACHMENT
COVER GP-FRONT HOUSING
7E-0463 COVER GP-FRONT HOUSING
7E-0463 COVER GP-FRONT HOUSING
S/N 7SF1-19179
FOR USE WITH AIR COMPRESSOR
ALSO AN ATTACHMENT
COVER GP-FRONT HOUSING
7L-0004 COVER GP-FRONT HOUSING
7L-0004 COVER GP-FRONT HOUSING
S/N 7SF1-19179
GEAR GP-FRONT
2W-8475 GEAR GP-FRONT
2W-8475 GEAR GP-FRONT
S/N 7SF1-19179
HOUSING GP-FRONT
7L-0002 HOUSING GP-FRONT
7L-0002 HOUSING GP-FRONT
S/N 7SF1-9976
HOUSING GP-FRONT
7L-0002 HOUSING GP-FRONT
7L-0002 HOUSING GP-FRONT
S/N 7SF9977-19179
LIFTING GP-ENGINE
LIFTING GP-ENGINE
7E-2314 LIFTING GP-ENGINE
7E-2314 LIFTING GP-ENGINE
S/N 7SF1-19179
MOUNTING GP-ALTERNATOR
MOUNTING GP-ALTERNATOR
7E-5614 MOUNTING GP-ALTERNATOR
7E-5614 MOUNTING GP-ALTERNATOR
CANNOT BE USED WITH FREON COMPRESSOR
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
7E-5616 MOUNTING GP-ALTERNATOR
7E-5616 MOUNTING GP-ALTERNATOR
FOR USE WITH FREON COMPRESSOR
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
9Y-8995 MOUNTING GP-ALTERNATOR
9Y-8995 MOUNTING GP-ALTERNATOR
FOR USE WITH 7 RIB POLY-RIB FAN DRIVE
ALSO AN ATTACHMENT
MOUNTING GP-ENGINE
MOUNTING GP-ENGINE
9Y-6667 MOUNTING GP-ENGINE
9Y-6667 MOUNTING GP-ENGINE
MARC MOUNTING GP FOR PETERBILT
AN ATTACHMENT
SUPPORT GP-ENGINE
4P-2838 SUPPORT GP-ENGINE
4P-2838 SUPPORT GP-ENGINE
FRONT, NARROW
CANNOT BE USED WITH LARGE RUBBER DAMPER
AN ATTACHMENT
SUPPORT GP-ENGINE
7E-1717 SUPPORT GP-ENGINE
7E-1717 SUPPORT GP-ENGINE
FOR USE WITH MOBILE ENGINES WHICH REQUIRE SINGLE POINT FRONT MOUNTING
CANNOT BE USED WITH INSTALLED RADIATOR, RUBBER DAMPER
AN ATTACHMENT
SUPPORT GP-ENGINE
7E-6303 SUPPORT GP-ENGINE
7E-6303 SUPPORT GP-ENGINE
S/N 7SF6555-19179
FRONT SIDE MOUNT
ALSO AN ATTACHMENT
SUPPORT GP-ENGINE
9Y-7256 SUPPORT GP-ENGINE
9Y-7256 SUPPORT GP-ENGINE
S/N 7SF1-19179
PROVIDES FRONT SUPPORT, SIDE OF BLOCK MOUNTED
FOR USE WITH GMT 530 B-MODEL BUS & C-MODEL TRUCKS REQUIRING FRONT ENGINE SUPPORTS
PAN GP-OIL
PAN GP-OIL
7E-0522 PAN GP-OIL
7E-0522 PAN GP-OIL
S/N 7SF1-19179
FOR USE WITH @@@@@ 7E-3643@@@@@
PLUG GP-OIL PAN
7E-2313 PLUG GP-OIL PAN
7E-2313 PLUG GP-OIL PAN
S/N 7SF1-19179
FOR USE WITH STAMPED STEEL OIL PAN, 21 LITER OIL PAN
PISTON & ROD GP
PISTON & ROD GP
7E-3579 PISTON & ROD GP
7E-3579 PISTON & ROD GP
S/N 7SF1-19179
16.5:1 RATIO
PISTON & ROD GP
9Y-8543 PISTON & ROD GP
9Y-8543 PISTON & ROD GP
S/N 7SF1-19179
16:1 RATIO
RING GP-PISTON
7E-5213 RING GP-PISTON
7E-5213 RING GP-PISTON
FOR USE WITH 1.1L ENGINES BUILT WITH CHROME PLATED TOP RINGS ON THE PISTON
FIELD INSTALLATION
RING GP-PISTON
7E-5214 RING GP-PISTON
7E-5214 RING GP-PISTON
FOR USE WITH 1.1L ENGINES BUILT WITH PLASMA COATED TOP RINGS ON THE PISTON
FIELD INSTALLATION
PULLEY GP
DAMPER & PULLEY GP
4P-3188 DAMPER & PULLEY GP
4P-3188 DAMPER & PULLEY GP
FOR USE WITH 8 GROOVE POLY RIB BELT
AN ATTACHMENT
DAMPER & PULLEY GP
7E-8437 DAMPER & PULLEY GP
7E-8437 DAMPER & PULLEY GP
304.8MM DIAMETER SOLID DAMPER
FOR USE WITH 8 GROOVE POLY RIB BELT
AN ATTACHMENT
DAMPER & PULLEY GP
9Y-6682 DAMPER & PULLEY GP
9Y-6682 DAMPER & PULLEY GP
S/N 7SF1-19179
304.8MM DIAMETER SOLID DAMPER
PULLEY GP-CRANKSHAFT
4W-5429 PULLEY GP-CRANKSHAFT
4W-5429 PULLEY GP-CRANKSHAFT
S/N 7SF1-19179
SUPPRESSION GP-SOUND
COVER GP-SOUND SUPPRESSION
7E-3643 COVER GP-SOUND SUPPRESSION
7E-3643 COVER GP-SOUND SUPPRESSION
S/N 7SF1-19179
FOR USE WITH @@@@@ 7E-0522@@@@@
ALSO AN ATTACHMENT
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
4P-0600 COVER GP-VALVE MECHANISM
4P-0600 COVER GP-VALVE MECHANISM
S/N 7SF6555-19179
FOR USE WITH @@@@@ 4P-0563@@@@@, @@@@@ 4P-0564@@@@@
ALSO AN ATTACHMENT
COVER GP-VALVE MECHANISM
7E-9915 COVER GP-VALVE MECHANISM
7E-9915 COVER GP-VALVE MECHANISM
FOR USE WITH TOP FRONT VALVE COVER OIL FILL
AN ATTACHMENT
COVER GP-VALVE MECHANISM
9Y-9507 COVER GP-VALVE MECHANISM
9Y-9507 COVER GP-VALVE MECHANISM
S/N 7SF1-19179
TALL WITH THREE EXTERNAL BOSSES
Type 2
ALSO AN ATTACHMENT
COVER GP-VALVE MECHANISM
9Y-9507 COVER GP-VALVE MECHANISM
9Y-9507 COVER GP-VALVE MECHANISM
S/N 7SF1-19179
TALL WITH THREE EXTERNAL BOSSES
Type 1
ALSO AN ATTACHMENT
MECHANISM GP-FUEL PUMP & VALVE
4P-4372 MECHANISM GP-FUEL PUMP & VALVE
4P-4372 MECHANISM GP-FUEL PUMP & VALVE
S/N 7SF10865-19179
ROCKER ARM GP
7C-6077 ROCKER ARM GP
7C-6077 ROCKER ARM GP
S/N 7SF1-19179
PART OF 4P-4372 MECHANISM GP-FUEL PUMP & VALVE, 2W-9607 VALVE MECHANISM GP
VALVE MECHANISM GP
2W-9607 VALVE MECHANISM GP
2W-9607 VALVE MECHANISM GP
S/N 7SF1-10927

Information:

(For parts list, see above)

Truck Engine News
Some Components Of The 7E3580 Engine Adapter Group For Allison AT545, MT543D, And MT653DRD Transmissions Are Not Serviced By Caterpillar
1990/11/01
Specifications
Adapter Group (Engine To Transmission)
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Engine to Transmission Adapter
3116 Truck Engines
Service Magazine
Some Components Of The 7E3580 Engine Adapter Group For Allison AT545, MT543D, And MT653DRD Transmissions Are Not Serviced By Caterpillar{3279,1013,3009}
1990/11/05
General Service Information
Tu-Flo 300 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 400, 500, 1000 Compressors
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 501 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 600 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 700 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Introduction
BENDIX AIR COMPRESSOR
Description
BENDIX AIR COMPRESSOR
Compressor Mounting/Drive Configurations
BENDIX AIR COMPRESSOR
Operation
BENDIX AIR COMPRESSOR
Lubrication
BENDIX AIR COMPRESSOR
Cooling
BENDIX AIR COMPRESSOR
Air Induction
BENDIX AIR COMPRESSOR
Preventive Maintenance
BENDIX AIR COMPRESSOR
Compressor Removal And Disassembly
BENDIX AIR COMPRESSOR
Preparation For Disassembly
BENDIX AIR COMPRESSOR
Cleaning Of Parts
BENDIX AIR COMPRESSOR
Inspection Of Parts
BENDIX AIR COMPRESSOR
Repairs
BENDIX AIR COMPRESSOR
Assembly
BENDIX AIR COMPRESSOR
Testing Rebuilt Compressor
BENDIX AIR COMPRESSOR
Tabulated Technical Data
BENDIX AIR COMPRESSOR
Compressor Troubleshooting
BENDIX AIR COMPRESSOR
Introduction
BENDIX AIR COMPRESSOR
Description
BENDIX AIR COMPRESSOR
Operation
BENDIX AIR COMPRESSOR
Intake And Compression Of Air (Loaded)
BENDIX AIR COMPRESSOR
Air Induction
BENDIX AIR COMPRESSOR
Preventative Maintenance
BENDIX AIR COMPRESSOR
Removal And Disassembly
BENDIX AIR COMPRESSOR
Cleaning Of Parts
BENDIX AIR COMPRESSOR
Inspection Of Parts
BENDIX AIR COMPRESSOR
Repairs
BENDIX AIR COMPRESSOR
Assembly
BENDIX AIR COMPRESSOR
Tu-Flo 550 Specifications
BENDIX AIR COMPRESSOR
Torque Specifications
BENDIX AIR COMPRESSOR
Dimensional Data
BENDIX AIR COMPRESSOR
Maintenance Kits And Available Service Parts
BENDIX AIR COMPRESSOR
Compressor Troubleshooting
BENDIX AIR COMPRESSOR
Introduction
BENDIX AIR COMPRESSOR
Description
BENDIX AIR COMPRESSOR
Operation
BENDIX AIR COMPRESSOR
Air Induction
BENDIX AIR COMPRESSOR
Preventative Maintenance
BENDIX AIR COMPRESSOR
Removal And Disassembly
BENDIX AIR COMPRESSOR
Cleaning Of Parts
BENDIX AIR COMPRESSOR
Inspection Of Parts
BENDIX AIR COMPRESSOR
Repairs
BENDIX AIR COMPRESSOR
Assembly
BENDIX AIR COMPRESSOR
Tu-Flo 750 Specifications
BENDIX AIR COMPRESSOR
Torque Specifications
BENDIX AIR COMPRESSOR
Dimensional Data
BENDIX AIR COMPRESSOR
Maintenance Kits And Available Service Parts
BENDIX AIR COMPRESSOR
Compressor Troubleshooting
BENDIX AIR COMPRESSOR
EL-740 Air Compressor
MIDLAND AIR COMPRESSORS
EL-1300/EL-1600 Air Compressors
MIDLAND AIR COMPRESSORS
Truck Engine News
Air Compressor Installation Procedure{1803}
1995/04/01
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
Repair Guidelines for Air Compressors {1803}
2003/10/01
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Operation and Maintenance Manual
Air Compressor - Inspect
3116 Truck Engine
Air Compressor Filter - Clean/Replace
3116 Truck Engine
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Specifications
Air Compressor
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Air Compressor
3116 Truck Engines
Lines (Air Compressor)
3116 Truck Engines
Disassembly and Assembly
Air Compressor
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Air Compressor - Remove and Install
3116 On Highway Engines
Service Magazine
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
Operation and Maintenance Manual
Belt Tensioner - Inspect - If Equipped
3116 Truck Engine
Specifications
Water Pump Belt Tightener
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Belt Tension Chart
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Belt Tensioner Assembly
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Belt Tension Chart
3116 Truck Engines
Belt Tensioner
3116 Truck Engines
Belt Tensioner
3116 Truck Engines
Belt Tensioner
3116 Truck Engines
Disassembly and Assembly
Belt (Poly-Rib) And Tensioner
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Belt Tensioner - Remove and Install
3116 On Highway Engines
Belt Tightener - Remove
3116 On Highway Engines
Belt Tightener - Install
3116 On Highway Engines
Belt Tightener - Disassemble
3116 On Highway Engines
Belt Tightener - Assemble
3116 On Highway Engines
Truck Engine News
Compression Brakes Should be Inspected Carefully During Repairs to the Cylinder Head and Valve Mechanism {1119}
2003/05/01
Operation and Maintenance Manual
Auxiliary Engine Brakes
3116 Truck Engine
Special Instruction
Jake Brake Part Number Cross-Reference To Caterpillar Part Numbers{1119}
Jake Brake Part Number Cross-Reference To Caterpillar Part Numbers{1119}
Systems Operation
Exhaust Brake
3116 Truck Engine
Truck Engine News
New 8T2998 Lubricant Available
1986/02/01
Spacer Installation is Now Recommended for Improved Oil Control on 3100 Camshaft Housing Covers {1210}
2003/03/01
Engine News
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Technical Information Bulletin
Alternate Procedure For Repairing Oil Leaks Around The Cam Roller Follower Side Covers
Alternate Procedure For Repairing Oil Leaks Around The Cam Roller Follower Side Covers
Specifications
Camshaft
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Camshaft
3116 Truck Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Excessive Bearing Wear - Inspect
3116 Truck Engine
Disassembly and Assembly
Camshaft
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Camshaft Bearings
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Camshaft Bearings - Remove and Install
3116 On Highway Engines
Camshaft - Install
3116 On Highway Engines
Camshaft Gear - Remove and Install
3116 On Highway Engines
Camshaft - Remove
3116 On Highway Engines
Service Magazine
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Truck Engine News
Use 6V6035 Hardness Tester On Crankshafts
1982/03/31
Inspection Marks On Bearings
1982/05/19
Reuse Of Engine Bearings
1983/12/21
Crankshaft Failures
1983/12/21
Remanufactured Undersize Crankshafts Are Available
1984/04/04
New Rear Crankshaft Seal Groups Available{1161}
1994/10/01
Improved 1U-7430 Front Crankshaft Seal Installer Available{1160}
1995/08/01
New Design Of Cylinder Block And Main Bearings {1201,1203,1224}
1999/05/01
New Main Bearing Material {1203}
1999/05/01
There Is a New Maximum Temperature for 2W-8147 Gear {1204}
2003/09/01
Engine News
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Special Instruction
Using the 1U-7598 Seal Installation Group To Install 115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
Using the 1U-7598 Seal Installation Group To Install 115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Technical Information Bulletin
Failure Of Main Thrust Bearing
Failure Of Main Thrust Bearing
Specifications
Crankshaft Seals
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Crankshaft
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Connecting Rod And Main Bearing Journals
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Connecting Rod Bearing Journal
3116 Truck Engines
Main Bearing Journal
3116 Truck Engines
Crankshaft
3116 Truck Engines
Crankshaft Seals
3116 Truck Engines
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3116 Truck Engine
Main Bearings - Inspect
3116 Truck Engine
Troubleshooting
Engine Has Early Wear
3114, 3116 and 3126 Engines
Disassembly and Assembly
Crankshaft Rear Seal
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Crankshaft Salvage Wear Sleeve
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Vibration Damper, Pulley and Crankshaft Fron Seal.
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Crankshaft Main Bearings
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Crankshaft
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Bearing Clearance - Check
3116 On Highway Engines
Crankshaft Main Bearings - Install
3116 On Highway Engines
Crankshaft Front Seal - Remove
3116 On Highway Engines
Crankshaft Front Seal - Install
3116 On Highway Engines
Crankshaft Rear Seal - Remove
3116 On Highway Engines
Crankshaft Rear Seal - Install
3116 On Highway Engines
Crankshaft Wear Sleeve (Rear) - Install
3116 On Highway Engines
Crankshaft Wear Sleeve (Rear) - Remove - If Equipped
3116 On Highway Engines
Crankshaft Main Bearings - Remove
3116 On Highway Engines
Crankshaft Gear - Remove and Install
3116 On Highway Engines
Crankshaft - Remove
3116 On Highway Engines
Crankshaft - Install
3116 On Highway Engines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Rotate Crankshaft On 3114, 3116 And 3126 Engines Using 9U-6943 Gear Shaft Housing Assembly Or 9U-7336 Gear Shaft Housing Assembly {1202,0701}
1996/12/09
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2002/12/23
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Truck Engine News
Inspection Marks On Bearings
1982/05/19
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/08
Thicker Head Gaskets Available For Use With Resurfaced Cylinder Blocks
1992/09/01
Use Of 4C-4377 Stress Plate Group In 3116 Cylinder Block Reconditioning{0672,0673,1201}
1994/08/30
New Design Of Cylinder Block And Main Bearings {1201,1203,1224}
1999/05/01
New Main Bearing Material {1203}
1999/05/01
Correction to Guideline for Reusable Parts and Salvage Operations, SEBF8192-02 {1201}
2000/02/01
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Main Bearing Material {1203}
1999/06/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation of 7C-6208 Cylinder Sleeve {1222}
Installation of 7C-6208 Cylinder Sleeve {1222}
Usage of Cylinder Head Gaskets{1124}
Usage of Cylinder Head Gaskets{1124}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Cylinder Block
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Connecting Rod And Main Bearing Journals
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Piston Cooling Jet
3116 Truck Engines
Cylinder Block Cover Group
3116 Truck Engines
Main Bearing Journal
3116 Truck Engines
Cylinder Block
3116 Truck Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
3116 Truck Engine
Excessive Bearing Wear - Inspect
3116 Truck Engine
Main Bearings - Inspect
3116 Truck Engine
Troubleshooting
Engine Has Early Wear
3114, 3116 and 3126 Engines
Excessive Engine Oil Consumption
3114, 3116 and 3126 Engines
Disassembly and Assembly
Camshaft Bearings
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Piston Cooling Tubes
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Crankshaft Main Bearings
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Measuring Main Bearing Clearances
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Bearing Clearance - Check
3116 On Highway Engines
Crankshaft Main Bearings - Install
3116 On Highway Engines
Camshaft Bearings - Remove and Install
3116 On Highway Engines
Crankshaft Main Bearings - Remove
3116 On Highway Engines
Piston Cooling Jets - Remove and Install
3116 On Highway Engines
Service Magazine
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Recommendation For Use Of A FLEX-HONE On 1100, 3100 and 3200 Series Engines {1201}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Thicker Head Gaskets Available For Use With Resurfaced Cylinder Blocks{1124}
1992/10/05
Oversize Pistons Not Available{1214,1216}
1993/04/05
Thicker Head Gasket Available For Cylinder Block Salvage Procedure {1124}
1997/12/22
Truck Engine News
Separate Valve Stem Gauges Available
1982/06/23
Engine Valve Stem &quot;use Again &quot; Specifications
1983/03/02
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/11/23
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups
1990/11/01
Modification Of 1U7791 Valve Seat Driver
1990/11/01
Thicker Head Gaskets Available For Use With Resurfaced Cylinder Blocks
1992/09/01
New 9U6101 Lower Pilot Reamer Group Available
1993/01/01
Fuel Injector Sleeve Replacement Tooling{0703,1125}
1996/02/26
Lubricant Used On Cylinder Head Bolts Changed{1100}
1996/02/26
New Engine Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/26
A New Inlet Valve is Released for use in 3116 and 3126 Truck Engines with the Two Valve Configuration. {1105}
2000/06/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/01
Correct Procedures for Installing, Reaming and Coining Copper Sleeves {1100, 1101, 1713}
2008/04/01
Engine News
New Cast Iron Valve Guide And New Exhaust Valve With Chrome Plated Stem Will Help Prevent Early Hour Exhaust Valve Sticking{1104,1105}
1998/05/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Operation and Maintenance Manual
Engine Valve Lash - Inspect/Adjust
3116 Truck Engine
Special Instruction
0R-2730 and 0R-2840 Cylinder Head Installation{1100}
0R-2730 and 0R-2840 Cylinder Head Installation{1100}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Usage of Cylinder Head Gaskets{1124}
Usage of Cylinder Head Gaskets{1124}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
Correct Machining Of The 130-9004 Intake Valve Seat Insert
Correct Machining Of The 130-9004 Intake Valve Seat Insert
Specifications
Valves
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Cylinder Head
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Cylinder Head Valves
3116 Truck Engines
Cylinder Head
3116 Truck Engines
Tool Operating Manual
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
3116 Truck Engine
Disassembly and Assembly
Cylinder Head
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Valves
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Valve Guides
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Valve Seats
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Inlet and Exhaust Valve Guides - Remove and Install
3116 On Highway Engines
Inlet and Exhaust Valves - Remove and Install
3116 On Highway Engines
Unit Injector Sleeve - Install
3116 On Highway Engines
Unit Injector Sleeve - Remove
3116 On Highway Engines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
3116 On Highway Engines
Cylinder Head - Install
3116 On Highway Engines
Cylinder Head - Remove
3116 On Highway Engines
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Modification Of 1U7791 Valve Seat Driver{0782,1103}
1990/10/29
New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups{1208}
1990/11/05
Thicker Head Gaskets Available For Use With Resurfaced Cylinder Blocks{1124}
1992/10/05
New 9U6101 Lower Pilot Reamer Group Available{0670,1125}
1993/02/01
New Valve Cover Gasket Used {1107}
1994/01/17
128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}
1997/01/27
Cylinder Head Stress Plate Used During Cylinder Bore Honing And Measurement {1223}
1997/01/27
Thicker Head Gasket Available For Cylinder Block Salvage Procedure {1124}
1997/12/22
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
3116 Truck Engine
Specifications
Vibration Damper and Pulley
3116 Truck Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
3116 Truck Engine
Disassembly and Assembly
Vibration Damper, Pulley and Crankshaft Fron Seal.
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Vibration Damper and Pulley - Remove and Install
3116 On Highway Engines
Service Magazine
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Specifications
Accessory Drive - Splined
3116 Truck Engines
Operation and Maintenance Manual
Fan Drive Bearing - Lubricate
3116 Truck Engine
Specifications
Fan Drive
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Fan Drive
3116 Truck Engines
Disassembly and Assembly
Water Pump And Belt
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Technical Information Bulletin
Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing
Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Truck Engine News
Some Components Of The 7E3580 Engine Adapter Group For Allison AT545, MT543D, And MT653DRD Transmissions Are Not Serviced By Caterpillar
1990/11/01
New Locking Bolt Used In Flywheel Groups
1991/10/01
Specifications
Flywheel
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Flywheel Runout
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Flywheel Housing
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Flywheel Housing Runout
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Flywheel Housing Bore
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Adapter Group (Engine To Transmission)
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Engine to Transmission Adapter
3116 Truck Engines
Flywheel
3116 Truck Engines
Flywheel Housing
3116 Truck Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
3116 Truck Engine
Disassembly and Assembly
Flywheel
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Flywheel Housing
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Flywheel - Remove
3116 On Highway Engines
Flywheel - Install
3116 On Highway Engines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Some Components Of The 7E3580 Engine Adapter Group For Allison AT545, MT543D, And MT653DRD Transmissions Are Not Serviced By Caterpillar{3279,1013,3009}
1990/11/05
New Locking Bolt Used In Flywheel Groups{1156}
1991/10/14
Specifications
Front Gear Group
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Gear Group (Front)
3116 Truck Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
3116 Truck Engine
Gear Group - Inspect
3116 Truck Engine
Disassembly and Assembly
Timing Gear Housing and Idler Gear
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Camshaft Idler Gear - Remove and Install
3116 On Highway Engines
Gear Group (Front) - Remove
3116 On Highway Engines
Gear Group (Front) - Install
3116 On Highway Engines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Rotate Crankshaft On 3114, 3116 And 3126 Engines Using 9U-6943 Gear Shaft Housing Assembly Or 9U-7336 Gear Shaft Housing Assembly {1202,0701}
1996/12/09
Truck Engine News
Some Components Of The 7E3580 Engine Adapter Group For Allison AT545, MT543D, And MT653DRD Transmissions Are Not Serviced By Caterpillar
1990/11/01
New Rear Crankshaft Seal Groups Available{1161}
1994/10/01
Specifications
Flywheel Housing
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Flywheel Housing Runout
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Flywheel Housing Bore
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Adapter Group (Engine To Transmission)
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Flywheel Housing
3116 Truck Engines
Testing and Adjusting
Flywheel Housing - Inspect
3116 Truck Engine
Disassembly and Assembly
Flywheel Housing
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Crankshaft Rear Seal
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Flywheel Housing - Remove and Install
3116 On Highway Engines
Service Magazine
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
Some Components Of The 7E3580 Engine Adapter Group For Allison AT545, MT543D, And MT653DRD Transmissions Are Not Serviced By Caterpillar{3279,1013,3009}
1990/11/05
Truck Engine News
Improved 1U-7430 Front Crankshaft Seal Installer Available{1160}
1995/08/01
Specifications
Front Housing
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Front Housing and Covers
3116 Truck Engines
Crankshaft Seals
3116 Truck Engines
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Timing Gear Housing and Idler Gear
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Front Cover - Remove
3116 On Highway Engines
Front Cover - Install
3116 On Highway Engines
Housing (Front) - Install
3116 On Highway Engines
Housing (Front) - Remove
3116 On Highway Engines
Service Magazine
Use 146-2597 Rocker Arm Bearing Installation Tool To Hold Push Rods In Place {1208}
1998/08/17
Truck Engine News
Use 6V6035 Hardness Tester On Crankshafts
1982/03/31
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/19
Inspection Marks On Bearings
1982/05/19
Separate Valve Stem Gauges Available
1982/06/23
Make Change To 6V2100 Multitach And 5P9698 Calibrator
1982/12/08
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/12/08
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/08
Engine Valve Stem &quot;use Again &quot; Specifications
1983/03/02
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/11/23
Reuse Of Engine Bearings
1983/12/21
Crankshaft Failures
1983/12/21
New 8T2998 Lubricant Available
1986/02/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Engine Timing Indicator Group Available
1986/07/01
Increase Piston Reuse With Keystone Piston Ring Gage Group
1986/07/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups
1990/11/01
Modification Of 1U7791 Valve Seat Driver
1990/11/01
Some Components Of The 7E3580 Engine Adapter Group For Allison AT545, MT543D, And MT653DRD Transmissions Are Not Serviced By Caterpillar
1990/11/01
Procedure To Repair Damaged Oil Pan Drain Hole Threads
1992/04/01
Thicker Head Gaskets Available For Use With Resurfaced Cylinder Blocks
1992/09/01
Oversize Pistons Not Available
1993/03/01
Use Of 4C-4377 Stress Plate Group In 3116 Cylinder Block Reconditioning{0672,0673,1201}
1994/08/30
New Rear Crankshaft Seal Groups Available{1161}
1994/10/01
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Operation and Maintenance Manual
Overhaul Considerations
3116 Truck Engine
Special Instruction
Using the 1U-7598 Seal Installation Group To Install 115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
Using the 1U-7598 Seal Installation Group To Install 115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Technical Information Bulletin
Failure Of Main Thrust Bearing
Failure Of Main Thrust Bearing
Service Magazine
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Recommendation For Use Of A FLEX-HONE On 1100, 3100 and 3200 Series Engines {1201}
1979/09/10
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Modification Of 1U7791 Valve Seat Driver{0782,1103}
1990/10/29
New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups{1208}
1990/11/05
Some Components Of The 7E3580 Engine Adapter Group For Allison AT545, MT543D, And MT653DRD Transmissions Are Not Serviced By Caterpillar{3279,1013,3009}
1990/11/05
New Locking Bolt Used In Flywheel Groups{1156}
1991/10/14
Procedure To Repair Damaged Oil Pan Drain Hole Threads{1302}
1992/04/20
New 9U6101 Lower Pilot Reamer Group Available{0670,1125}
1993/02/01
Oversize Pistons Not Available{1214,1216}
1993/04/05
Improved Alternator Groups Now Available{1405}
1998/05/04
Operation and Maintenance Manual
Engine Mounts - Inspect
3116 Truck Engine
Technical Information Bulletin
Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing
Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing
Truck Engine News
Procedure To Repair Damaged Oil Pan Drain Hole Threads
1992/04/01
Possible Sources Of High Crankcase Blowby From Breather Tube{1317}
1995/11/28
Possible Sources of High Crankcase Blowby From Breather Tube{1317}
1996/03/27
The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
2003/09/01
Technical Information Bulletin
7X-2521 Gasket Kit Includes New Oil Pan Gasket
7X-2521 Gasket Kit Includes New Oil Pan Gasket
Specifications
Breather (Crankcase)
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Disassembly and Assembly
Oil Pan
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Engine Oil Pan - Remove and Install
3116 On Highway Engines
Service Magazine
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Procedure To Repair Damaged Oil Pan Drain Hole Threads{1302}
1992/04/20
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Truck Engine News
Inspection Marks On Bearings
1982/05/19
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/12/08
Reuse Of Engine Bearings
1983/12/21
Increase Piston Reuse With Keystone Piston Ring Gage Group
1986/07/01
Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/11/01
Oversize Pistons Not Available
1993/03/01
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/11/01
Piston Usage Chart For Two Piece Pistons{1214}
1995/08/01
New Fractured Connecting Rod Has Been Released {1218}
2003/07/01
New Guidelines for Inspecting Pistons {1214}
2006/01/01
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Installation Instructions for Piston Packs{1225, 1239}
Installation Instructions for Piston Packs{1225, 1239}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Connecting Rod
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Pistons And Rings
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Connecting Rod And Main Bearing Journals
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Piston Cooling Jet
3116 Truck Engines
Connecting Rod
3116 Truck Engines
Connecting Rod Bearing Journal
3116 Truck Engines
Piston and Rings
3116 Truck Engines
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Information Release Memo
NEW FRACTURED SPLIT ROD IS CURRENTLY PRODUCTION RELEASED FOR THE C9, 3114, 3116 AND 3126 ENGINES
NEW FRACTURED SPLIT ROD IS CURRENTLY PRODUCTION RELEASED FOR THE C9, 3114, 3116 AND 3126 ENGINES
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
3116 Truck Engine
Compression - Test
3116 Truck Engine
Excessive Bearing Wear - Inspect
3116 Truck Engine
Connecting Rod Bearings - Inspect
3116 Truck Engine
Piston Ring Groove - Inspect
3116 Truck Engine
Troubleshooting
Engine Has Early Wear
3114, 3116 and 3126 Engines
Excessive Engine Oil Consumption
3114, 3116 and 3126 Engines
Mechanical Noise (Knock) in Engine
3114, 3116 and 3126 Engines
Disassembly and Assembly
Piston Cooling Tubes
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Piston And Connecting Rod Assemblies
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Bearing Clearance - Check
3116 On Highway Engines
Pistons and Connecting Rods - Assemble
3116 On Highway Engines
Pistons and Connecting Rods - Disassemble
3116 On Highway Engines
Pistons and Connecting Rods - Remove
3116 On Highway Engines
Pistons and Connecting Rods - Install
3116 On Highway Engines
Piston Cooling Jets - Remove and Install
3116 On Highway Engines
Service Magazine
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Oversize Pistons Not Available{1214,1216}
1993/04/05
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/10/31
Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Specifications
Rear Power Take-Off (RPTO)
3116 Truck Engines
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
3116 Truck Engine
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Specifications
Crankshaft Pulley
3116 Truck Engines
Vibration Damper and Pulley
3116 Truck Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Vibration Damper, Pulley and Crankshaft Fron Seal.
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Vibration Damper and Pulley - Remove and Install
3116 On Highway Engines
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Disassembly and Assembly
Power Steering Pump
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Truck Engine News
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/19
Separate Valve Stem Gauges Available
1982/06/23
Make Change To 6V2100 Multitach And 5P9698 Calibrator
1982/12/08
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08
New Engine Timing Indicator Group Available
1986/07/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
Modification Of 1U7791 Valve Seat Driver
1990/11/01
Improved 1U-7430 Front Crankshaft Seal Installer Available{1160}
1995/08/01
Dynamometer Testing of Electronic Engines{1000}
1995/10/01
Fuel Injector Sleeve Replacement Tooling{0703,1125}
1996/02/26
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25
Modification Of 1U7791 Valve Seat Driver{0782,1103}
1990/10/29
Rotate Crankshaft On 3114, 3116 And 3126 Engines Using 9U-6943 Gear Shaft Housing Assembly Or 9U-7336 Gear Shaft Housing Assembly {1202,0701}
1996/12/09
128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}
1997/01/27
Cylinder Head Stress Plate Used During Cylinder Bore Honing And Measurement {1223}
1997/01/27
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2002/12/23
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Operation and Maintenance Manual
Belt Tensioner - Inspect - If Equipped
3116 Truck Engine
Belt - Inspect
3116 Truck Engine
Specifications
Belt Tension Chart
3116 Truck Engines
Testing and Adjusting
Belt Tension Chart
3116 Truck Engine
Truck Engine News
New 8T2998 Lubricant Available
1986/02/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups
1990/11/01
New Valve Cover Gasket Used{1107}
1994/01/01
New Valve Cover Gasket{1107}
1996/01/23
New Engine Lifter Arm Assembly With Crowned Roller Used In Lifter Groups{1209}
1998/05/01
A New Inlet Valve is Released for use in 3116 and 3126 Truck Engines with the Two Valve Configuration. {1105}
2000/06/01
Engine News
New Cast Iron Valve Guide And New Exhaust Valve With Chrome Plated Stem Will Help Prevent Early Hour Exhaust Valve Sticking{1104,1105}
1998/05/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Operation and Maintenance Manual
Engine Valve Lash - Inspect/Adjust
3116 Truck Engine
Fuel Injection Timing - Check
3116 Truck Engine
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Technical Information Bulletin
Alternate Procedure For Repairing Oil Leaks Around The Cam Roller Follower Side Covers
Alternate Procedure For Repairing Oil Leaks Around The Cam Roller Follower Side Covers
Specifications
Valve Rocker Arms And Lifters
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Valve Cover
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Unit Injector Mechanism
3116 Truck Engines
Valve Rocker Arms and Lifters
3116 Truck Engines
Valve Mechanism Cover
3116 Truck Engines
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Finding Top Center Position for No. 1 Piston
3116 Truck Engine
Engine Valve Lash - Inspect/Adjust
3116 Truck Engine
Troubleshooting
Excessive Valve Lash
3114, 3116 and 3126 Engines
Little or No Valve Lash
3114, 3116 and 3126 Engines
Valve Train Noise
3114, 3116 and 3126 Engines
Disassembly and Assembly
Valve Cover
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Inlet Manifold (Valve Cover Base)
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Rocker Arm Assemblies
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Cam Roller Followers
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Valve Mechanism Cover - Remove and Install
3116 On Highway Engines
Rocker Shaft and Pushrod - Remove
3116 On Highway Engines
Rocker Shaft and Pushrod - Install
3116 On Highway Engines
Rocker Shaft - Disassemble
3116 On Highway Engines
Rocker Shaft - Assemble
3116 On Highway Engines
Lifter Group - Remove and Install
3116 On Highway Engines
Service Magazine
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Fuel Setting Screw Cover And Bolt {1257}
1990/07/02
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Modification Of 1U7791 Valve Seat Driver{0782,1103}
1990/10/29
New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups{1208}
1990/11/05
Thicker Head Gaskets Available For Use With Resurfaced Cylinder Blocks{1124}
1992/10/05
New 9U6101 Lower Pilot Reamer Group Available{0670,1125}
1993/02/01
New Valve Cover Gasket Used {1107}
1994/01/17
Use 146-2597 Rocker Arm Bearing Installation Tool To Hold Push Rods In Place {1208}
1998/08/17
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QU&#201;BEC, Quebec, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.