9Y-7899 GOVERNOR GP-UNIT INJECTOR S/N 7SF1-19179 138 BRAKE KW (185 BHP) ENGINE. HIGH TORQUE RISE PART OF 7E-5271 GOVERNOR GP-UNIT INJECTOR FOR USE WITH MANUAL TRANSMISSION 3116



FUEL SYSTEM
GOVERNOR GP
LINES GP-FUEL
FILTER GP-FUEL
CONTROL GP-FUEL RATIO

TRUCK ENGINE 3116 TRUCK ENGINE 7SF
 3116 Truck Engine--ATAAC 7SF00001-UP SEBP1879 3116 7SF   (1989)

FUEL SYSTEM

GOVERNOR GP
7E-5273 GOVERNOR GP-UNIT INJECTOR
7E-5606 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
9Y-7899 GOVERNOR GP-UNIT INJECTOR
4P-5749 KIT-GOVERNOR SHAFT
LINES GP-GOVERNOR OIL
7E-5621 LINES GP-GOVERNOR OIL
LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL
 

#SEBP18790240
 

9Y-7899: GOVERNOR GP-UNIT INJECTOR

9Y-7899 GOVERNOR GP-UNIT INJECTOR
S/N 7SF1-19179
138 BRAKE KW (185 BHP) ENGINE. HIGH TORQUE RISE
PART OF 7E-5271 GOVERNOR GP-UNIT INJECTOR
FOR USE WITH MANUAL TRANSMISSION
i00432620 SEBP1879
9Y7899 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 7E-1673 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 7E-5863 [1] CAM-TORQUE  
3. 9Y-4027 [1] SPRING GP  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 7E-3947 [1] CONTROL AS-RATIO  
  Y   SEPARATE ILLUSTRATION
 

#SEBP18790241
 

4P-5749: KIT-GOVERNOR SHAFT

4P-5749 KIT-GOVERNOR SHAFT
RISER
FIELD INSTALLATION
i00201668 SEBP1879
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
  8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
  8C-8546 M [8] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
  4P-0737 [1] SHAFT-RISER  
  M   METRIC PART
 

#SEBP18790242
 

7E-2624: LINES GP-FUEL

7E-2624 LINES GP-FUEL
S/N 7SF1-19179
i00401434 SEBP1879
7E2624 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 030-8156 [1] ELBOW  
2. 3J-1907 [2] SEAL-O-RING  
3. 030-7947 [1] ELBOW  
4. 7E-2623 [1] TUBE AS  
5. 7E-2622 [1] TUBE AS  
6. 5C-7261 M [2] NUT (M8X1.25-THD)  
7. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
8. 7E-2707 [2] CLIP  
9. 4P-9129 [2] STRAP AS  
10. 8T-4138 M [2] BOLT (M6X1X20-MM)  
11. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 9X-2099 M [2] STUD (M8X1.25X52.75-MM)  
13. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP18790243
 

7E-5856: LINES GP-FUEL

7E-5856 LINES GP-FUEL
S/N 7SF6555-19179
LOW PRESSURE LINES
FOR USE WITH @@@@@ 7C-9651@@@@@, @@@@@ 9Y-6690@@@@@, @@@@@ 7E-7598@@@@@
ALSO AN ATTACHMENT
i00407004 SEBP1879
7E5856 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 030-8156 [1] ELBOW  
2. 3J-1907 [2] SEAL-O-RING  
3. 030-7947 [1] ELBOW  
4. 7E-5854 [1] TUBE AS  
5. 7E-5853 [1] TUBE AS  
6. 5C-7261 M [2] NUT (M8X1.25-THD)  
7. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
8. 5C-9553 M [2] BOLT (M6X1X16-MM)  
9. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
10. 7E-2707 [2] CLIP  
11. 7E-2706 [2] STRAP AS  
12. 9X-2099 M [2] STUD (M8X1.25X52.75-MM)  
  M   METRIC PART
 

#SEBP18790244
 

4P-2076: LINES GP-FUEL FILTER

4P-2076 LINES GP-FUEL FILTER
S/N 7SF9138-16161
i00374388 SEBP1879
4P2076 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 4P-2074 [1] TUBE AS  
2. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
3. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
4. 6V-8724 [2] ELBOW  
5. 3J-1907 [7] SEAL-O-RING  
6. 4P-2073 [1] TUBE AS  
7. 9S-1350 [1] CLIP  
8. 6V-8397 [4] SEAL-O-RING  
9. 9S-4191 [1] PLUG (9/16-18-THD)  
10. 7E-0155 [1] SCREEN AS-FUEL  
11. 7E-0156 [1] FITTING-INLET  
12. 8T-7934 [2] WASHER-HARD (11X21X5-MM THK)  
13. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
14. 5F-7054 [1] SEAL-O-RING  
15. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
16. 7E-5190 [1] TUBE AS  
17. 7E-5189 [1] VALVE AS (FUEL)  
18. 8T-0151 [1] ADAPTER  
19. 7X-2459 [1] ADAPTER-TEE  
20. 3N-3252 [1] SPRING  
21. 5P-7813 [1] SEAL-O-RING  
22. 7E-9898 [1] CONNECTOR  
  M   METRIC PART
 

#SEBP18790245
 

4P-2076: LINES GP-FUEL FILTER

4P-2076 LINES GP-FUEL FILTER
S/N 7SF16162-19179
i00374392 SEBP1879
4P2076 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 4P-2074 [1] TUBE AS  
2. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
3. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
4. 6V-8724 [2] ELBOW  
5. 3J-1907 [5] SEAL-O-RING  
6. 4P-2073 [1] TUBE AS  
7. 9S-1350 [1] CLIP  
8. 6V-8397 [4] SEAL-O-RING  
9. 9S-4191 [1] PLUG (9/16-18-THD)  
10. 7E-0155 [1] SCREEN AS-FUEL  
11. 8T-7934 [2] WASHER-HARD (11X21X5-MM THK)  
12. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
13. 5F-7054 [1] SEAL-O-RING  
14. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
15. 7E-5190 [1] TUBE AS  
16. 7E-5189 [1] VALVE AS (FUEL)  
17. 8T-0151 [1] ADAPTER  
18. 7X-2459 [1] ADAPTER-TEE  
19. 3N-3252 [1] SPRING  
20. 5P-7813 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP18790246
 

4P-2159: LINES GP-FUEL FILTER

4P-2159 LINES GP-FUEL FILTER
S/N 7SF5289-9633; 7SF9952-19179
i00374461 SEBP1879
4P2159 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 8T-7934 B [2] WASHER-HARD (11X21X5-MM THK)  
2. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
3. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
4. 6V-8724 [2] ELBOW  
5. 3J-1907 [6] SEAL-O-RING  
6. 7W-0183 [1] TUBE AS  
7. 9S-1350 [1] CLIP  
8. 6V-8397 [4] SEAL-O-RING  
9. 9S-4191 [1] PLUG (9/16-18-THD)  
10. 6V-6317 BM [2] BOLT (M10X1.5X20-MM)  
11. 7E-6288 [1] TUBE AS  
12. 5F-7054 [1] SEAL-O-RING  
13. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
14. 7E-5190 [1] TUBE AS  
15. 7E-5189 [1] VALVE AS (FUEL)  
16. 8T-0151 [1] ADAPTER  
17. 7X-2459 [1] ADAPTER-TEE  
18. 3N-3252 [1] SPRING  
21. 5P-7813 [1] SEAL-O-RING  
22. 7E-9898 [1] CONNECTOR  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP18790247
 

7C-9651: LINES GP-FUEL FILTER

7C-9651 LINES GP-FUEL FILTER
S/N 7SF1-5288; 7SF9436-10024
i00394876 SEBP1879
7C9651 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 8T-7934 [2] WASHER-HARD (11X21X5-MM THK)  
2. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
3. 6V-8724 C [2] ELBOW  
4. 3J-1907 [7] SEAL-O-RING  
5. 7E-0156 [1] FITTING-INLET  
6. 6V-8397 [4] SEAL-O-RING  
7. 7E-1460 C [1] TUBE AS  
8. 7W-0183 [1] TUBE AS  
9. 9S-1350 [1] CLIP  
  8T-4200 CM [1] BOLT (M8X1.25X16-MM)  
  8T-4224 C [1] WASHER-HARD (8.8X16X2-MM THK)  
10. 7E-0155 [1] SCREEN AS-FUEL  
11. 8T-0151 C [1] ADAPTER  
12. 7E-5189 C [1] VALVE AS (FUEL)  
13. 7E-5190 C [1] TUBE AS  
14. 5F-7054 [1] SEAL-O-RING  
15. 8T-7547 CM [2] BOLT (M8X1.25X30-MM)  
16. 7X-2459 [1] ADAPTER-TEE  
  9S-4191 [1] PLUG (9/16-18-THD)  
17. 5P-7813 C [1] SEAL-O-RING  
18. 3N-3252 C [1] SPRING  
19. 6V-8636 C [1] CONNECTOR  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP18790248
 

7E-9735: LINES GP-FUEL FILTER

7E-9735 LINES GP-FUEL FILTER
S/N 7SF2470-5751
ALSO AN ATTACHMENT
i00392011 SEBP1879
7E9735 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 7E-9739 [1] TUBE AS  
2. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
3. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
4. 6V-8724 [2] ELBOW  
5. 3J-1907 [7] SEAL-O-RING  
6. 7E-9734 [1] TUBE AS  
7. 9S-1350 [2] CLIP  
8. 6V-8397 [4] SEAL-O-RING  
9. 9S-4191 [1] PLUG (9/16-18-THD)  
10. 7E-0155 [1] SCREEN AS-FUEL  
11. 7E-0156 [1] FITTING-INLET  
12. 8T-7934 [2] WASHER-HARD (11X21X5-MM THK)  
13. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
14. 5F-7054 [1] SEAL-O-RING  
15. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
16. 7E-5190 [1] TUBE AS  
17. 7E-5189 [1] VALVE AS (FUEL)  
18. 8T-0151 [1] ADAPTER  
19. 7X-2459 [1] ADAPTER-TEE  
20. 6V-8636 [1] CONNECTOR  
21. 3N-3252 [1] SPRING  
22. 5P-7813 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP18790249
 

4P-0589: LINES GP-FUEL RATIO CONTROL

4P-0589 LINES GP-FUEL RATIO CONTROL
S/N 7SF6555-19179
ROAD SPEED LIMITER
i00371709 SEBP1879
4P0589 LINES GP-FUEL RATIO CONTROL Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 7E-7695 [1] TUBE AS  
2. 8M-2772 [1] CLIP (LOOP)  
3. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
4. 7E-7271 [1] LIMIT-ROAD SPEED  
5. 5P-3238 [1] FITTING  
6. 6V-8647 [1] CONNECTOR  
7. 3K-0360 [1] SEAL-O-RING  
8. 8J-7844 [1] BUSHING-REDUCER  
9. 3J-7354 [1] SEAL-O-RING  
10. 4J-5477 [2] SEAL-O-RING  
11. 7X-0492 [1] ELBOW  
 

Information:

Truck Engine News
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/23
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
New Shim Improves Low Idle Stability Of Governor
1990/11/01
Be Sure To Remove All Air From The Fuel System On A Truck That Has Run Out Of Fuel, Had The Fuel Filter Changed, Or Had The Governor Removed{1250,1256,1261,1264,1274}
1991/03/01
Larger O-ring Seal Available For Oil Supply Port In Governor Housing
1991/05/01
4P6493 Governor Information Plate Available
1992/06/01
Governor Specifications Are Available Through The Technical Information System
1992/09/01
Replacement Governors For Early Engines
1992/11/01
Measuring "Dynamic Rack" Of Unit Injectors
1993/06/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Governor Shimming Is Determined By The Governor Test Bench Calibration{1264,1289}
1996/07/30
Replacing The Shutoff Assembly In Engines With Older Governors{1264,1289}
1996/07/30
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/30
Engine News
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Operation and Maintenance Manual
Fuel Inlet Screen - Clean/Inspect/Replace
3116 Truck Engine
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE GOVERNORS ON CERTAIN 3116 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE GOVERNORS ON CERTAIN 3116 TRUCK ENGINES
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE GOVERNORS ON CERTAIN 3116 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE GOVERNORS ON CERTAIN 3116 TRUCK ENGINES
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Specifications
Governor
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Fuel Transfer Pump
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Governor
3116 Truck Engines
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Information Release Memo
REMANUFACTURED GOVERNORS FOR VARIOUS 3114 AND 3116 INDUSTRIAL, MACHINE, MARINE AND ON-HIGHWAY TRUCK APPLICATIONS
REMANUFACTURED GOVERNORS FOR VARIOUS 3114 AND 3116 INDUSTRIAL, MACHINE, MARINE AND ON-HIGHWAY TRUCK APPLICATIONS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Governor - Adjust
3116 Truck Engine
Troubleshooting
Governor Instability
3114, 3116 and 3126 Engines
Disassembly and Assembly
Governor And Fuel Transfer Pump
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Unit Fuel Injectors
SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP
Governor - Install
3116 On Highway Engines
Governor - Remove
3116 On Highway Engines
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Use Correct Calibration Pin (1U9786) When Calibrating Governor; Do Not Use 1U7305 Insertion Tool{0706,0782,1264}
1989/11/06
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
Engine Rack Control Assemblies Improved {1257}
1990/07/02
New Fuel Setting Screw Cover And Bolt {1257}
1990/07/02
Setscrew And Nut Available For Fuel Setting And Injector Synchronization {1257}
1990/10/22
New Shim Improves Low Idle Stability Of Governor{1265,1256}
1990/11/26
Be Sure To Remove All Air From The Fuel System On A Truck That Has Run Out Of Fuel, Had The Fuel Filter Changed, Or Had The Governor Removed{1250,1256,1261,1264,1274}
1991/02/18
Larger O-ring Seal Available For Oil Supply Port In Governor Housing{1264}
1991/05/13
Be Sure To Use Correct Connector/Connectors Between Fuel Transfer Pump Outlet And Tube To Fuel Filter{1274,1256}
1992/02/24
4P6493 Governor Information Plate Available{7557}
1992/06/15
Governor Specifications Are Available Through The Technical Information System{1264,0374}
1992/09/07
Replacement Governors For Early Engines{1264}
1992/11/09
Measuring "Dynamic Rack" Of Unit Injectors{0780}
1993/06/21
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17

Caterpillar Parts SIS Catalog 3116 :

7E-5606 GOVERNOR GP-UNIT INJECTOR
7E-5273 GOVERNOR GP-UNIT INJECTOR
7E-5272 GOVERNOR GP-UNIT INJECTOR
7E-5271 GOVERNOR GP-UNIT INJECTOR
7E-5270 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
7E-4080 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
7E-1673 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
7E-0002 GOVERNOR GP-UNIT INJECTOR
4P-5749 KIT-GOVERNOR SHAFT
LINES GP-FUEL
7E-2624 LINES GP-FUEL
LINES GP-FUEL
7E-5856 LINES GP-FUEL
LINES GP-FUEL FILTER
4P-2076 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
4P-2076 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
4P-2159 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
7C-9651 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
7E-9735 LINES GP-FUEL FILTER

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QUÉBEC, Quebec, Canada