AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3V5266 IDLER GP-FRONT-PART 1 OF 2 LONG 225D EXCAVATOR


UNDERCARRIAGE
IDLER GP
FRAME AND BODY
FRAME GP
UNDERCARRIAGE
ROLLER GP

EXCAVATOR 225D EXCAVATOR 2SJ
 225D EXCAVATOR 2SJ00001-UP (MACHINE) POWERED BY 3208 ENGINE SEBP1881 225D 2SJ   (1989)

UNDERCARRIAGE

IDLER GP
IDLER GP-FRONT
3V-5266 IDLER GP-FRONT
IDLER GP-FRONT
3V-5266 IDLER GP-FRONT
IDLER GP-FRONT
3V-5278 IDLER GP-FRONT
IDLER GP-FRONT
3V-5278 IDLER GP-FRONT
 

#SEBP18810200
 

3V-5266: IDLER GP-FRONT

3V5266 IDLER GP-FRONT-PART 1 OF 2
LONG
c479485 SEBP1881
3V5266 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 225D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-1856 [2] PILOT-SPRING RADIUS  
2. 9V-9408 [2] SPRING  
3. 8K-0318 [4] BAR  
4. 8T-4835 [12] BOLT  
  8T-4223 [12] WASHER  
5. 2S-5926 [2] VALVE  
6. 5M-6708 [4] WASHER  
7. 2S-5925 [2] VALVE  
8. 8K-4702 [2] ROD  
9. 8K-0319 [2] WASHER  
10. 1A-2029 [4] BOLT  
  3H-3451 [2] LOCK-NUT  
11. 8F-4225 [12] BOLT  
  8T-4994 [12] WASHER  
12. 7X-0311 [4] BOLT  
  7X-0563 [4] WASHER-HARD  
13. 5M-5000 [4] LOCK-PIN  
14. 3V-8816 [2] YOKE AS  
    (EACH INCLUDES)
15. 5B-5821 [1] PIN-DOWEL  
16. 3V-9164 [1] SERVICE GP-COVER (RH)  
17. 8T-1916 [1] PLATE-WARNING  
18. 7B-3028 [4] SCREW-DRIVE  
19. 3V-9165 [1] SERVICE GP-COVER (LH)  
20. 8T-1916 [1] PLATE-WARNING  
21. 7B-3028 [4] SCREW-DRIVE  
22. 7X-0346 [8] BOLT  
  8T-4122 [8] WASHER  
23. 8R-3390 [2] PILOT  
24. 8K-0317 [4] BAR  
   
    NOTE: QUANTITIES SHOWN
    ARE THOSE REQUIRED
    FOR BOTH RH & LH
    FRONT IDLERS
 

#SEBP18810201
 

3V-5266: IDLER GP-FRONT

3V5266 IDLER GP-FRONT-PART 2 OF 2
LONG
c479486 SEBP1881
3V5266 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 225D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8917 [2] BOLT  
  1B-1067 [2] WASHER  
2. 1A-8526 [2] NUT-FULL  
3. 8M-6191 [2] SLEEVE-BOLT  
4. 7M-1851 [2] BOLT-SPRING  
5. 1S-5331 [2] CYLINDER  
6. 5F-0149 [2] SEAL  
7. 4S-9006 [2] SEAL-PACKING  
8. 7X-3358 [2] BOLT  
9. 5M-2997 [2] SEAL  
10. 5M-2998 [2] RING-EXTRUSION  
11. 8H-7980 [2] PISTON  
12. 1H-8397 [2] RING-RETAINING  
13. 6H-6269 [4] RING-WEAR  
14. 2P-0347 [2] PLUG  
  1S-8947 [2] SEAL-O-RING  
15. 3V-5073 [4] BEARING-IDLER  
16. 3V-5131 [2] IDLER AS-FRONT  
17. 8T-2502 [24] BOLT  
  8T-4896 [24] WASHER-HARD  
18. 2M-2858 R [4] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
19. 1M-3097 [2] RING-SEALING  
20. 5K-0305 [2] SHAFT-FRONT IDLER  
21. 7F-8267 [4] SEAL-O-RING  
22. 1H-6227 [4] SEAL-O-RING  
23. 3P-8272 [4] BUSHING AS-IDLER  
    (EACH INCLUDES)
  9B-2289 [2] PIN  
24. 8P-6652 [1] BEARING AS  
   
    NOTE: QUANTITIES SHOWN
    ARE THOSE REQUIRED
    FOR BOTH RH & LH
    FRONT IDLERS
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP18810202
 

3V-5278: IDLER GP-FRONT

3V5278 IDLER GP-FRONT-PART 1 OF 2
PART OF 9C3988 FRAME AR-UNDERCARRIAGE
AN ATTACHMENT
c468094 SEBP1881
3V5278 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 225D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-1856 [2] PILOT-SPRING RADIUS  
2. 9V-9408 C [2] SPRING  
3. 8K-0318 [4] BAR  
4. 8T-4835 C [12] BOLT  
  8T-4223 C [12] WASHER  
5. 2S-5926 [2] VALVE  
6. 5M-6708 [4] WASHER  
7. 2S-5925 [2] VALVE  
8. 8R-3657 C [2] ROD  
9. 8K-0319 [2] WASHER  
10. 8T-2502 C [4] BOLT  
  3H-3451 [2] LOCK-NUT  
11. 8F-4225 [12] BOLT  
  8T-4994 C [12] WASHER  
12. 7X-0311 C [4] BOLT  
  7X-0563 C [4] WASHER-HARD  
13. 5M-5000 [4] LOCK-PIN  
14. 3V-8816 [2] YOKE AS  
    (EACH INCLUDES)
15. 5B-5821 [1] PIN-DOWEL  
16. 3V-9164 [1] SERVICE GP-COVER (RH)  
17. 8T-1916 C [1] PLATE-WARNING  
18. 7B-3028 [4] SCREW-DRIVE  
19. 3V-9165 [1] SERVICE GP-COVER (LH)  
20. 8T-1916 C [1] PLATE-WARNING  
21. 7B-3028 [4] SCREW-DRIVE  
22. 7X-0346 C [8] BOLT  
  8T-4122 C [8] WASHER  
23. 8R-3390 C [2] PILOT  
24. 8K-0317 [4] BAR  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP18810203
 

3V-5278: IDLER GP-FRONT

3V5278 IDLER GP-FRONT-PART 2 OF 2
PART OF 9C3988 FRAME AR-UNDERCARRIAGE
AN ATTACHMENT
c468098 SEBP1881
3V5278 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 225D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8917 C [2] BOLT  
  1B-1067 [2] WASHER  
2. 1A-8526 C [2] NUT-FULL  
3. 8M-6191 [2] SLEEVE-BOLT  
4. 7M-1851 [2] BOLT-SPRING  
5. 1S-5331 [2] CYLINDER  
6. 5F-0149 [2] SEAL  
7. 4S-9006 [2] SEAL-PACKING  
8. 7X-3358 C [2] BOLT  
9. 5M-2997 [2] SEAL  
10. 5M-2998 [2] RING-EXTRUSION  
11. 8H-7980 [2] PISTON  
12. 1H-8397 [2] RING-RETAINING  
13. 6H-6269 [4] RING-WEAR  
14. 2P-0347 [2] PLUG  
  1S-8947 [2] SEAL-O-RING  
15. 3V-5073 [4] BEARING-IDLER  
16. 3V-5131 [2] IDLER AS-FRONT  
17. 8T-2502 C [24] BOLT  
  8T-4896 C [24] WASHER-HARD  
18. 2M-2858 R [4] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
19. 1M-3097 [2] RING-SEALING  
20. 5K-0305 [2] SHAFT-FRONT IDLER  
21. 7F-8267 [4] SEAL-O-RING  
22. 1H-6227 [4] SEAL-O-RING  
23. 3P-8272 [4] BUSHING AS-IDLER  
    (EACH INCLUDES)
  9B-2289 [2] PIN  
24. 8P-6652 [1] BEARING AS  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP18810204
 

9C-3988: FRAME AR-UNDERCARRIAGE

9C3988 FRAME AR-UNDERCARRIAGE
AN ATTACHMENT
SEBP18810204 SEBP1881
  For full view, you need register

Parts for your 225D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3V-1463 Y [1] BEARING & GEAR GP  
   
  3V-5277 Y [1] CARBODY GP  
   
  9C-3141 Y [1] FRAME GP-TRACK ROLLER  
   
  3V-5276 Y [1] GUARD GP-RECOIL MECHANISM  
   
  8K-0173 Y [1] GUARD GP-TRACK MOTOR  
   
  3V-5278 Y [1] IDLER GP-FRONT  
   
  6W-1988 Y [1] LINES GP-TRACK MOTOR  
   
  5A-8374 Y [4] ROLLER GP-TRACK CARRIER  
   
  9W-6772 Y [2] TRACK GP  
   
  9W-6721 Y [16] TRACK ROLLER GP-SINGLE FLANGE  
    S/N 2SJ1-551
  8E-4612 Y [16] TRACK ROLLER GP-SINGLE FLANGE  
    S/N 2SJ552-UP
   
  4E-2281 Y [1] STEP GP  
   
  9X-5892 [2] FILM-225D  
  Y   SEPARATE ILLUSTRATION
 

#SEBP18810205
 

9C-3141: FRAME GP-TRACK ROLLER

9C3141 FRAME GP-TRACK ROLLER
TYPE 1
PART OF 9C3988 FRAME AR-UNDERCARRIAGE
AN ATTACHMENT
c457016 SEBP1881
9C3141 FRAME GP-TRACK ROLLER Parts scheme
  For full view, you need register

Parts for your 225D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9C-3143 [1] FRAME AS-TRACK ROLLER  
2. 9C-3145 [1] FRAME AS-TRACK ROLLER  
    (EA FRAME AS INCL)
3. 5K-3414 [2] BAR  
4. 4K-1136 [2] BLOCK  
5. 3V-8922 [1] GUARD AS (RH INNER AND LH OUTER)  
  3V-8923 [1] GUARD AS (LH INNER AND RH OUTER)  
6. 8K-1909 [2] RETAINER AS  
7. 5P-2566 [4] BOLT  
  8T-4223 [4] WASHER  
8. 7X-0366 [8] BOLT  
  8T-4994 [8] WASHER  
9. 8C-6362 [8] BOLT  
  8T-4122 [8] WASHER  
10. 3V-5257 [4] BRACKET-CARRIAGE ROLLER  
11. 7M-8480 [4] DOWEL  
 

#SEBP18810206
 

9C-3141: FRAME GP-TRACK ROLLER

9C3141 FRAME GP-TRACK ROLLER
TYPE 2
PART OF 9C3988 FRAME AR-UNDERCARRIAGE
AN ATTACHMENT
c536535 SEBP1881
9C3141 FRAME GP-TRACK ROLLER Parts scheme
  For full view, you need register

Parts for your 225D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6C-2903 C [1] FRAME AS-TRACK ROLLER  
2. 6C-2904 C [1] FRAME AS-TRACK ROLLER (EA FRAME AS INCL)  
3. 5K-3414 C [2] BAR  
4. 6C-0807 C [2] BLOCK  
5. 6C-2910 C [1] GUARD AS (RH INNER LH OUTER)  
  6C-2909 C [1] GUARD AS (LH INNER RH OUTER)  
6. 8K-1909 [2] RETAINER AS  
7. 5P-2566 [4] BOLT  
  8T-4223 [4] WASHER  
8. 7X-0366 [8] BOLT  
  8T-4994 [8] WASHER  
9. 8C-6362 [8] BOLT  
  8T-4122 [8] WASHER  
10. 3V-5257 [4] BRACKET-CARRIAGE ROLLER  
11. 7M-8480 [4] DOWEL  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP18810207
 

9C-3131: FRAME GP-TRACK ROLLER

9C3131 FRAME GP-TRACK ROLLER
LONG
c458252 SEBP1881
9C3131 FRAME GP-TRACK ROLLER Parts scheme
  For full view, you need register

Parts for your 225D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-8480 [4] DOWEL  
2. 9C-3135 [1] FRAME AS-TRACK ROLLER  
  5K-3414 [2] BAR  
3. 4K-1136 [2] BLOCK  
4. 3V-8923 [1] GUARD AS (INNER)  
5. 3V-8922 [1] GUARD AS (OUTER)  
6. 8K-1909 [2] RETAINER AS  
7. 8C-6362 [8] BOLT  
  8T-4122 [8] WASHER  
8. 3V-5257 [4] BRACKET-CARRIAGE ROLLER  
9. 7X-0366 [8] BOLT  
  8T-4994 [8] WASHER  
10. 5P-2566 [4] BOLT  
  8T-4223 [4] WASHER  
11. 9C-3133 [1] FRAME AS-TRACK ROLLER  
12. 3V-8922 [1] GUARD AS (INNER)  
13. 3V-8923 [1] GUARD AS (OUTER)  
14. 4K-1136 [2] BLOCK  
15. 5K-3414 [2] BAR  
 

#SEBP18810208
 

5A-8374: ROLLER GP-TRACK CARRIER

5A8374 ROLLER GP-TRACK CARRIER
4 REQUIRED
ALSO PART OF 9C3988 FRAME AR-UNDERCARRIAGE
c310309 SEBP1881
5A8374 ROLLER GP-TRACK CARRIER Parts scheme
  For full view, you need register

Parts for your 225D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-7914 [1] RING-RETAINING  
2. 9S-3567 [1] COLLAR AS-END  
3. 1M-4291 [2] DOWEL  
4. 1M-8747 R [1] SEAL GP-DUO-CONE  
5. 8H-2262 [2] RING-TORIC SEALING  
6. 9S-3582 [2] CONE-ROLLER BEARING  
7. 9S-3581 [2] CUP-ROLLER BEARING  
8. 0S-1594 [3] BOLT  
9. 2H-6338 [1] SEAL-O-RING  
10. 8P-6188 [1] PLATE-RETAINER  
11. 5K-9107 C [2] BOLT-SELF LOCKING  
12. 2P-0347 [1] PLUG  
13. 5M-2043 [1] COVER-ROLLER  
14. 1H-9696 [1] SEAL-O-RING  
15. 3T-3207 C [1] SHAFT-ROLLER  
16. 5A-8375 [1] ROLLER AS  
17. 1S-8947 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP18810209
 

9W-6721: ROLLER GP-TRACK-SINGLE FLANGE

9W6721 TRACK ROLLER GP-SINGLE FLANGE
ALSO PART OF 9C3988 FRAME AR-UNDERCARRIAGE
c457019 SEBP1881
9W6721 ROLLER GP-TRACK-SINGLE FLANGE Parts scheme
  For full view, you need register

Parts for your 225D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-6789 [1] TRACK ROLLER GP-SINGLE FLANGE  
  9W-2198 [1] ROLLER AS-& BEARING  
2. 9W-3198 [1] SHAFT-TRACK ROLLER  
3. 9W-2146 [1] PLUG  
4. 1M-8748 R [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  6H-1309 [2] RING-SEALING  
5. 9W-6788 [2] COLLAR-TRACK ROLLER  
6. 9W-2204 [2] PIN  
7. 1H-5728 [2] SEAL-O-RING  
8. 7F-5227 [4] BOLT  
  5P-8248 [4] WASHER-HARD  
  R   REMFG PART MAY BE AVAILABLE
 

Information:

Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Specifications
Front Idlers
225D, 229D AND 231D EXCAVATORS HYDRAULIC SYSTEM
Front Idlers
225D & 231D EXCAVATORS HYDRAULIC SYSTEM
Front Idler<BR> 9U0938 (Part of 4E7481 Frame Arrangement)
215D, 219D, 225D, 231D, 235C, 245B. 235D, 245D EXCAVATOR ATT
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Undercarriage Reconditioning Bulletin
Reconditioning Dimensions for Idlers {4159}
Reconditioning Dimensions for Idlers {4159}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}
Idler Oil Fill Volume {4159, 4159}
Idler Oil Fill Volume {4159, 4159}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Information Release Memo
205B/211B/213/215SA/219/225 EXCAVATOR CLASSIC UNDERCARRIAGE OFFERING
205B/211B/213/215SA/219/225 EXCAVATOR CLASSIC UNDERCARRIAGE OFFERING
Disassembly and Assembly
Recoil Springs And Hydraulic Track Adjusters
225D & 229D EXCAVATOR VEHICLE SYSTEMS
Hydraulic Track Adjusters
225D & 229D EXCAVATOR VEHICLE SYSTEMS
Recoil Springs
225D & 229D EXCAVATOR VEHICLE SYSTEMS
Front Idlers
225D & 229D EXCAVATOR VEHICLE SYSTEMS
Recoil Springs And Hydraulic Track Adjusters
225D & 231D EXCAVATORS VEHICLE SYSTEMS
Hydraulic Track Adjusters
225D & 231D EXCAVATORS VEHICLE SYSTEMS
Recoil Springs
225D & 231D EXCAVATORS VEHICLE SYSTEMS
Front Idlers
225D & 231D EXCAVATORS VEHICLE SYSTEMS
Service Magazine
Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16
Oil for Arctic Track Rollers and Idlers Has Changed from SAE 5W40 to SAE 0W40 {0645, 4159, 4180, 7000}
2011/08/10
Preventing Track Roller & Idler Duo-Cone Seal Packing in Freeze-Thaw Conditions {4159, 4180}
Preventing Track Roller & Idler Duo-Cone Seal Packing in Freeze-Thaw Conditions {4159, 4180}

Caterpillar Parts SIS Catalog 225D :

GUARD GP-LINES
6C-3425 GUARD GP-LINES
GUARD GP-LINES
6C-3425 GUARD GP-LINES
GUARD GP-RECOIL MECHANISM
3V-5276 GUARD GP-RECOIL MECHANISM
GUARD GP-TRACK MOTOR
8K-0173 GUARD GP-TRACK MOTOR
GUARD GP-TRACK MOTOR
8K-4683 GUARD GP-TRACK MOTOR
GUARD GP-SWIVEL
8K-4123 GUARD GP-SWIVEL
9C-3398 GUARD GP-BOTTOM
GUARD GP-SWIVEL
6W-6647 GUARD GP-SWIVEL
IDLER GP-FRONT
3V-5266 IDLER GP-FRONT
IDLER GP-FRONT
3V-5278 IDLER GP-FRONT
IDLER GP-FRONT
3V-5278 IDLER GP-FRONT
9C-3988 FRAME AR-UNDERCARRIAGE
FRAME GP-TRACK ROLLER
9C-3141 FRAME GP-TRACK ROLLER
FRAME GP-TRACK ROLLER
9C-3141 FRAME GP-TRACK ROLLER
FRAME GP-TRACK ROLLER
9C-3131 FRAME GP-TRACK ROLLER
ROLLER GP-TRACK CARRIER
5A-8374 ROLLER GP-TRACK CARRIER

Truck sale:

 
 
1990 CAT 225D

Joey Martin Auctioneers
Benton, Georgia
1988 CAT 225D
USD $21,500 
1988 CAT 225D

Big D Heavy Equipment LLC
Dallas, Texas
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.