9W6472 TIP GP-SHARP-CENTER TYPE 2 AN ATTACHMENT 225D EXCAVATOR

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)

0. 9W-6472 TIP GP
1. 9W-6473 TIP GP

RIPPER GP

2. 9C-7517 RIPPER GP
3. 4E-9097 RIPPER AS

SERVICE EQUIPMENT AND SUPPLIES

CHARTS & FILMS

4. NAME PLATE
0. INFORMATION

EXCAVATOR 225D EXCAVATOR 2SJ
225D EXCAVATOR 2SJ00001-UP (MACHINE) POWERED BY 3208 ENGINE SEBP1881 225D 2SJ (1989)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)

#SEBP18810590

9W-6472: TIP GP

TIP GP

9W6472 TIP GP-SHARP-CENTER
TYPE 2
AN ATTACHMENT

c631536 SEBP1881

For full view, you need register

Parts for your 225D EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	114-0358	[1]	PIN-G.E.T.
2.	9W-2359	[1]	TIP-PENETRATION
3.	114-0359	[1]	RETAINER AS-G.E.T.

#SEBP18810591

9W-6473: TIP GP

TIP GP

9W6473 TIP GP-SHARP-CORNER
2 REQUIRED. TYPE 2
AN ATTACHMENT

c631528 SEBP1881

For full view, you need register

Parts for your 225D EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	114-0358	[1]	PIN-G.E.T.
2.	9W-2358	[1]	TIP-PENETRATION
3.	114-0359	[1]	RETAINER AS-G.E.T.

#SEBP18810592

9C-7517: RIPPER GP

RIPPER GP

9C7517 RIPPER GP-VERSA-LINK
FOR USE WITH VERSA-LINK LINKAGE
AN ATTACHMENT

c414646 SEBP1881

For full view, you need register

Parts for your 225D EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	9C-7516	[1]	RIPPER AS
	9C-7515	[1]	PLATE AS
	9C-7513	[2]	PLATE
2.	9C-5187	[1]	SUPPORT-LH
	9C-5189	[1]	SUPPORT-RH
3.	9C-7509	[2]	PLATE
4.	9C-7514	[1]	PLATE
5.	9W-7488	[1]	ADAPTER
6.	9W-2678	[1]	PIN
	1U-2405	[1]	RETAINER
7.	9J-8920	[1]	TIP-RIPPER

#SEBP18810593

4E-9097: RIPPER AS

RIPPER AS

4E9097 RIPPER AS-3 SHANK
FOR USE WITH 864 MM (34 IN) EXTRME TRENCHING BUCKET
AN ATTACHMENT

c534776 SEBP1881

For full view, you need register

Parts for your 225D EXCAVATOR:

Pos.	Part No	Qty	Parts name	Comments
1.	9C-3281	[1]	PLATE AS

#SEBP18810594

NAME PLATES & FILMS

SEBP18810594 SEBP1881

For full view, you need register

Parts for your 225D EXCAVATOR:

Part No	Qty	Parts name

5P-8197	[1]	PLATE-WARNING-IN CAB ON RH SIDE WALL
		ABOVE WINDOW TOWARD FRONT OF CAB
9X-1878	[1]	PLATE-PRODUCT IDENTIFICATION NUMBER
		ON RH SIDE MAIN FRAME BELOW BOOM PIVOT
4B-4158	[12]	SCREW-DRIVE
3E-5785	[1]	FILM-WARNING-ON UNDERSIDE OF ACCESS DOOR
		TO FUEL AND HYDRAULIC TANK FILL CAPS
3E-5795	[1]	FILM-INSTRUCTION
		ON HYDRAULIC TANK NEAR SIGHT GAUGE
1P-2807	[3]	FILM-SYMBOL
		1-ON OUTSIDE SURFACE OF RH LIFT EYE
		1-ON INSIDE SURFACE OF LH LIFT EYE
		REARWARD AND FOREWARD FROM
		BOOM PIVOT PIN
		1-ON FRONT SURFACE OF CARBODY NEXT TO
		CENTER TOW EYE AT IDLER END
5P-7049	[1]	FILM-INSTRUCTION
		IN CAB RH SIDE ABOVE WINDOW TOWARD FRONT
5P-7524	[1]	FILM-WARNING-IN CAB-LOWER EDGE OF RH
		SIDE WINDOW ABOVE SWING LOCK LEVER
8T-0213	[1]	FILM-INSTRUCTION
		ON INSIDE OF FRONT SERVICE DOOR
8T-0560	[1]	FILM -HYDRAULIC CONNECTION
		ON INSIDE OF LH FRONT HOUSE DOOR
8T-1881	[1]	FILM-WARNING-ON INSIDE SURFACE OF CAB
		DOOR FOREWARD OF DOOR LATCH
8T-1882	[1]	FILM-WARNING
		ON CENTER POST OF REAR HOOD SUPPORT
8T-1911	[1]	FILM-WARNING
		IN CAB ON RH SIDE WALL ABOVE WINDOW
8T-1915	[4]	FILM-NOTICE
		1-LOWER REAR CORNER OF RH SIDE WINDOW
		1-LOWER REAR CORNER OF LH SIDE WINDOW
		1-LOWER CENTER (REAR WINDOW
		1-REAR CENTER (SKYLIGHT)
6V-4611	[1]	FILM-WARNING-ON LH SIDE OF BATTERY
		COMPARTMENT BELOW WASHER BOTTLE
	[2]	FILM-IDENTIFICATION-ON OIL FILTER
6V-7615	[1]	FILM-IDENTIFICATION-ON FUEL FILTER
7X-3229	[2]	FILM-TIE DOWN-ON UNDERCARRIAGE (FRONT)
		ABOVR RH AND LH LIFT EYES
7X-7644	[2]	FILM-TIE DOWN-ON UNDERCARRIAGE
		ABOVE CENTER TOW/TIE DOWN EYES
9X-1724	[1]	FILM-CAT
9X-2170		FILM INSTRUCTION-IN CAB-LOWER RH CORNER
		OF RH SIDE WINDOW
9X-6085	[1]	FILM-INSTRUCTION-OUTSIDE OF LH CONSOL
		ADJACENT TO LOCK LEVER
9X-8335	[2]	FILM-CAT
9X-8341	[2]	FILM-225 LC
9S-8063	[1]	TAG-NOTICE

Information:

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)

Special Instruction

Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}

Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}

Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System

Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}

Convert the Buckets from the J-Series Base Edge Assemblies to the K-Series Base Edge Assemblies{6523, 6803, 6805}
Convert the Buckets from the J-Series Base Edge Assemblies to the K-Series Base Edge Assemblies{6523, 6803, 6805}

398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}

398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}

256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}

256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}

Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}

Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}

Procedure for Installation and Removal of Cat<SUP>®</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat^® Advansys Tips {0751, 6001, 6800, 6805}

Instructions for Welding the Cat<SUP>®</SUP> Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat^® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}

Tool Operating Manual

Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}

Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}

Reuse And Salvage Guidelines

Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}

Service Magazine

6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23

The Special Instruction, REHS0597, "Recommendation for Welding 2-Strap Bucket Adapters to Base Edges" is Available {6800, 6801, 6803}
2001/04/23

Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16

Correct Installation of Bucket Side Cutters {6813}
2004/08/02

Correct Installation and Removal of Retainers for K Series Bucket Tips {6800, 6803, 6805}
2006/02/06

The Special Instruction, REHS2834 , "Converting Straight Edge Buckets from the J-Series Base Edge Assemblies to the K-Series" Is Now Available. {6523, 6800, 6803, 6823}
2005/12/05

Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27

Caterpillar Parts SIS Catalog 225D :

3G-3351 TIP GP

3G-3236 TIP GP

9W-6473 TIP GP

9W-6475 TIP GP-CORNER

Truck sale:

1990 CAT 225D

Joey Martin Auctioneers
Benton, Georgia

USD $21,500

1988 CAT 225D

Big D Heavy Equipment LLC
Dallas, Texas

9W6472 TIP GP-SHARP-CENTER TYPE 2 AN ATTACHMENT 225D EXCAVATOR

WORK TOOLS

9W-6472: TIP GP

Parts for your 225D EXCAVATOR:

9W-6473: TIP GP

Parts for your 225D EXCAVATOR:

9C-7517: RIPPER GP

Parts for your 225D EXCAVATOR:

4E-9097: RIPPER AS

Parts for your 225D EXCAVATOR:

NAME PLATES & FILMS

Parts for your 225D EXCAVATOR:

Information:

Caterpillar Parts SIS Catalog 225D :

Truck sale:

Modal