AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3G3816 VALVE GP-CONTROL R.H.-FORWARD SPEED PART OF 3G3818 VALVE-CONTROL 219D EXCAVATOR


HYDRAULIC SYSTEM
VALVE GP-CONTROL
VALVE GP-PILOT
LINES GP-PUMP
FILTER GP
VALVE GP
VALVE GP-RELIEF

EXCAVATOR 219D EXCAVATOR 5XG
 219D EXCAVATOR 5XG00001-UP (MACHINE) POWERED BY 3304 ENGINE SEBP1884 219D 5XG   (1989)

HYDRAULIC SYSTEM

VALVE GP-CONTROL
VALVE GP-CONTROL
3G-3818 VALVE GP-CONTROL
VALVE GP-CONTROL
3G-3817 VALVE GP-CONTROL
VALVE GP-CONTROL
3G-3816 VALVE GP-CONTROL
VALVE GP
9T-9088 VALVE GP
VALVE GP
6E-0267 VALVE GP
VALVE GP
9T-1690 VALVE GP
 

#SEBP18840330
 

3G-3816: VALVE GP-CONTROL

3G3816 VALVE GP-CONTROL
R.H.-FORWARD SPEED
PART OF 3G3818 VALVE-CONTROL
c528365 SEBP1884
3G3816 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 219D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-4476 [1] SPRING  
2. 2S-4434 [1] SPACER  
3. 8J-4491 [1] BOLT  
4. 8J-4488 [1] COVER  
5. 8J-4492 [1] STEM  
6. 4M-6979 B [5] SHIM .127MM(.005IN)THK  
  4M-6980 B [5] SHIM .254MM(.010IN)THK  
7. 3G-3814 [1] VALVE GP (RH)  
8. 5J-8004 [1] SPRING  
9. 6V-8546 [1] SEAL-LIP TYPE  
10. 0L-1351 C [2] BOLT  
11. 3D-2992 [1] SEAL  
12. 4J-2506 [3] SEAL-O-RING  
13. 9S-8004 [1] PLUG-O-RING  
  3J-1907 [1] SEAL  
14. 8J-4486 [1] STEM  
15. 4B-9880 [1] BALL  
16. 9S-4191 C [2] PLUG-O-RING  
  3J-1907 C [2] SEAL  
17. 6F-4855 [3] SEAL-O-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP18840331
 

8J-4356: VALVE GP-PILOT

8J4356 VALVE GP-PILOT
PART OF 3G3818 VALVE-CONTROL
c477921 SEBP1884
8J4356 VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 219D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-4345 [1] BOLT-12 POINT HEAD  
2. 1A-4790 [1] WASHER 1.67CM(.656IN)THK  
3. 5B-2113 [1] BEARING-NEEDLE  
4. 8J-4493 [1] SHAFT  
5. 1U-3931 [1] LEVER  
  1B-8702 [2] KEY-WOODRUFF  
6. 8J-4484 [4] RETAINER  
7. 8J-4482 [2] RETAINER  
8. 8J-4481 [2] SPRING (OUTER)  
9. 4D-3107 [2] SEAL-O-RING  
10. 0L-1351 C [14] BOLT  
11. 8J-4494 [1] COVER  
12. 8J-4480 [2] SPRING (INNER)  
13. 4D-0514 C [2] PLUG-PIPE  
14. 3G-5967 C [1] VALVE GP  
15. 7J-7673 [1] SEAL-LIP TYPE  
16. 1F-4503 [1] BEARING-NEEDLE  
17. 8J-4490 [1] GASKET  
18. 8J-4489 [1] COVER  
19. 6H-0190 [1] WASHER 1.98CM(.781IN)THK  
20. 5P-3108 C [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP18840332
 

8R-6383: LINES GP-PUMP

8R6383 LINES GP-PUMP-PART 1 OF 2
S/N 5XG1-694
8J7390-PAGE 199, 9J6394, 9T9088-PAGE 200
c477970 SEBP1884
8R6383 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your 219D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-5766 [12] FLANGE-HALF  
  1P-3703 [6] SEAL-RECTANGULAR  
2. 8C-6877 [24] BOLT (7/16-14X1.75IN)  
3. 9L-2182 [1] SPACER  
4. 8R-7144 [1] TUBE AS  
5. 1P-3704 [4] SEAL-RECTANGULAR (45MM DIA)  
6. 7X-0310 [15] BOLT (7/16-14X2IN)  
7. 9V-8831 [1] MANIFOLD  
8. 8T-2502 [3] BOLT (3/8-16X1.125IN)  
9. 6V-4432 [1] BOLT (1/2-13X4IN)  
10. 5C-4118 [1] TUBE AS  
11. 5P-8444 [3] GROMMET  
12. 5P-7469 [3] CLIP (TAB)  
  5P-7468 [3] CLIP (SLOT)  
13. 6W-3026 I [1] HOSE AS  
14. 6W-3027 I [1] HOSE AS  
15. 5C-8526 [1] TUBE AS  
16. 8R-7143 [1] TUBE AS  
17. 6V-8188 [1] NUT (1/2-13 THD)  
18. 8T-4223 [7] WASHER  
19. 9J-6394 Y [1] VALVE GP-RELIEF  
20. 5C-4114 [4] CLAMP  
  4L-6454 [2] BOLT (3/8-16X1IN)  
  6V-8801 [2] NUT (3/8-16 THD)  
21. 7K-1181 [3] STRAP-CABLE  
22. 8T-5360 [32] WASHER  
23. 030-7947 [1] ELBOW (9/16-18 STR THD)  
24. 8T-4896 [9] WASHER-HARD  
25. 5C-8509 I [2] HOSE AS  
26. 9S-4185 [1] PLUG-O-RING (3/4 X 16 THD)  
  3K-0360 [1] SEAL-O-RING (16.36MM ID)  
27. 3J-1907 [3] SEAL (11.89MM ID)  
28. 9S-4183 [1] PLUG  
29. 3D-2824 [4] SEAL-O-RING (23.47MM ID)  
30. 9S-4191 [2] PLUG-O-RING (9/16 X 18 THD)  
31. 2R-6276 [2] CONNECTOR (1 1/16-12 STR THD)  
32. 7D-0978 [1] TEE  
33. 5C-8511 [2] CLAMP  
34. 8T-9101 [1] BOLT (3/8-16X2.75IN)  
35. 4J-8265 [2] NUT (3/8-16 THD)  
36. 9T-9088 Y [1] VALVE GP (COMBINATION)  
  8T-9382 [3] BOLT (7/16-14X1.25IN)  
37. 5C-4321 I [1] HOSE AS  
38. 1P-4579 [2] FLANGE-HALF  
  4J-0524 [1] SEAL (47.22MM ID)  
  8T-8919 [4] BOLT (1/2-13X1.75IN)  
39. 8J-7390 Y [1] FILTER GP  
  8C-4436 [2] BOLT (1/2-13X1.375IN)  
40. 1P-4578 [2] FLANGE  
  7X-0308 [4] BOLT (7/16-14X1.375IN)  
41. 4J-0522 [1] SEAL (37.69MM ID)  
42. 030-7944 [1] ELBOW  
43. 6W-3025 [1] HOSE AS  
44. 5C-8659 [2] CLAMP  
45. 8T-7008 [1] BOLT (3/8-16X3IN)  
  I   SEE HOSE FABRICATION GUIDE
  Y   SEPARATE ILLUSTRATION
 

#SEBP18840333
 

8R-6383: LINES GP-PUMP

8R6383 LINES GP-PUMP-PART 2 OF 2
S/N 5XG1-694
c535449 SEBP1884
8R6383 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your 219D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-0344 [4] BOLT (5/8-11X1.375IN)  
2. 7X-0591 [8] WASHER-HARD  
3. 6W-3028 [1] TUBE AS  
4. 2J-8163 [1] SEAL-O-RING  
5. 6D-4597 [1] ADAPTER  
6. 4J-0522 [1] SEAL (37.69MM ID)  
7. 7X-0314 [2] BOLT (7/16-14X3IN)  
8. 6W-3030 [2] TEE  
9. 6W-3023 [1] TUBE  
10. 6C-3630 [2] HOSE HUMP  
  5P-0598 [8] CLAMP  
11. 6C-3647 [1] TUBE AS  
  8H-7521 [1] SEAL-O-RING  
  7X-0345 [4] BOLT (5/8-11X1.75IN)  
12. 7X-0311 [2] BOLT (7/16-14X2.25IN)  
  9G-5211 [2] SPACER  
13. 6E-3528 [1] VALVE GP-BREAKER RELIEF  
14. 3D-2824 [3] SEAL-O-RING (23.47MM ID)  
15. 030-7950 [1] ELBOW (1 1/16-12 STR THD)  
16. 6W-3024 [1] HOSE AS  
17. 2P-7211 [1] TEE  
  9S-8896 [1] CAP  
18. 7X-0320 [8] BOLT (7/16-14X5IN)  
19. 8T-5360 [8] WASHER  
20. 1P-5766 [4] FLANGE-HALF  
  1P-3703 [2] SEAL-RECTANGULAR  
21. 6V-0852 [2] CAP-DUST  
  1P-3704 [2] SEAL-RECTANGULAR (45MM DIA)  
22. 6V-3965 [2] NIPPLE AS  
  3J-1907 [2] SEAL (11.89MM ID)  
23. 8J-5914 [2] PLUG-O-RING  
  2S-4078 [2] SEAL-O-RING (37.46MM ID)  
 

#SEBP18840334
 

8R-6383: LINES GP-PUMP

8R6383 LINES GP-PUMP-PART 1 OF 2
S/N 5XG695-UP
8J7390-PAGE 199, 9J6394, 9T9088-PAGE 200
c477970 SEBP1884
8R6383 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your 219D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-5766 [12] FLANGE-HALF  
  1P-3703 [6] SEAL-RECTANGULAR  
2. 8C-6877 [24] BOLT (7/16-14X1.75IN)  
3. 9L-2182 [1] SPACER  
4. 8R-7144 [1] TUBE AS  
5. 1P-3704 [4] SEAL-RECTANGULAR (45MM DIA)  
6. 7X-0310 [15] BOLT (7/16-14X2IN)  
7. 9V-8831 [1] MANIFOLD  
8. 8T-2502 [3] BOLT (3/8-16X1.125IN)  
9. 6V-4432 [1] BOLT (1/2-13X4IN)  
10. 5C-4118 [1] TUBE AS  
11. 5P-8444 [3] GROMMET  
12. 5P-7469 [3] CLIP (TAB)  
  5P-7468 [3] CLIP (SLOT)  
13. 6W-3026 I [1] HOSE AS  
14. 6W-3027 I [1] HOSE AS  
15. 5C-8526 [1] TUBE AS  
16. 8R-7143 [1] TUBE AS  
17. 6V-8188 [1] NUT (1/2-13 THD)  
18. 8T-4223 [7] WASHER  
19. 9J-6394 Y [1] VALVE GP-RELIEF  
20. 5C-4114 [4] CLAMP  
  4L-6454 [2] BOLT (3/8-16X1IN)  
  6V-8801 [2] NUT (3/8-16 THD)  
21. 7K-1181 [3] STRAP-CABLE  
22. 8T-5360 [32] WASHER  
23. 030-7947 [1] ELBOW (9/16-18 STR THD)  
24. 8T-4896 [9] WASHER-HARD  
25. 5C-8509 I [2] HOSE AS  
26. 9S-4185 [1] PLUG-O-RING (3/4 X 16 THD)  
  3K-0360 [1] SEAL-O-RING (16.36MM ID)  
27. 3J-1907 [3] SEAL (11.89MM ID)  
28. 9S-4183 [1] PLUG  
29. 3D-2824 [4] SEAL-O-RING (23.47MM ID)  
30. 9S-4191 [2] PLUG-O-RING (9/16 X 18 THD)  
31. 2R-6276 [2] CONNECTOR (1 1/16-12 STR THD)  
32. 7D-0978 [1] TEE  
33. 5C-8511 [2] CLAMP  
34. 8T-9101 [1] BOLT (3/8-16X2.75IN)  
35. 4J-8265 [2] NUT (3/8-16 THD)  
36. 9T-9088 Y [1] VALVE GP (COMBINATION)  
  8T-9382 [3] BOLT (7/16-14X1.25IN)  
37. 5C-4321 I [1] HOSE AS  
38. 1P-4579 [2] FLANGE-HALF  
  4J-0524 [1] SEAL (47.22MM ID)  
  8T-8919 [4] BOLT (1/2-13X1.75IN)  
39. 8J-7390 Y [1] FILTER GP  
  8C-4436 [2] BOLT (1/2-13X1.375IN)  
40. 1P-4578 [2] FLANGE  
  7X-0308 [4] BOLT (7/16-14X1.375IN)  
41. 4J-0522 [1] SEAL (37.69MM ID)  
42. 030-7944 [1] ELBOW  
43. 6W-3025 [1] HOSE AS  
44. 5C-8659 [2] CLAMP  
45. 8T-7008 [1] BOLT (3/8-16X3IN)  
  I   SEE HOSE FABRICATION GUIDE
  Y   SEPARATE ILLUSTRATION
 

#SEBP18840335
 

8R-6383: LINES GP-PUMP

8R6383 LINES GP-PUMP-PART 2 OF 2
S/N 5XG695-UP
c535449 SEBP1884
8R6383 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your 219D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-0344 [4] BOLT (5/8-11X1.375IN)  
2. 7X-0591 [8] WASHER-HARD  
3. 6W-3028 [1] TUBE AS  
4. 2J-8163 [1] SEAL-O-RING  
5. 6D-4597 [1] ADAPTER  
6. 4J-0522 [1] SEAL (37.69MM ID)  
7. 7X-0314 [2] BOLT (7/16-14X3IN)  
8. 6W-3030 [2] TEE  
9. 6W-3023 [1] TUBE  
10. 6C-3630 [2] HOSE HUMP  
  5P-0598 [8] CLAMP  
11. 6C-3647 [1] TUBE AS  
  8H-7521 [1] SEAL-O-RING  
  7X-0345 [4] BOLT (5/8-11X1.75IN)  
12. 7X-0311 [2] BOLT (7/16-14X2.25IN)  
  9G-5211 [2] SPACER  
13. 6E-3528 [1] VALVE GP-BREAKER RELIEF  
14. 3D-2824 [3] SEAL-O-RING (23.47MM ID)  
15. 030-7950 [1] ELBOW (1 1/16-12 STR THD)  
16. 6W-3024 [1] HOSE AS  
17. 2P-7211 [1] TEE  
  9S-8896 [1] CAP  
18. 7X-0320 [8] BOLT (7/16-14X5IN)  
19. 8T-5360 [8] WASHER  
20. 1P-5766 [4] FLANGE-HALF  
  1P-3703 [2] SEAL-RECTANGULAR  
21. 6V-0852 [2] CAP-DUST  
  1P-3704 [2] SEAL-RECTANGULAR (45MM DIA)  
22. 6V-3965 [2] NIPPLE AS  
  3J-1907 [2] SEAL (11.89MM ID)  
23. 8J-5914 [2] PLUG-O-RING  
  2S-4078 [2] SEAL-O-RING (37.46MM ID)  
 

#SEBP18840336
 

8J-7390: FILTER GP

8J7390 FILTER GP
PART OF 8R6383 LINES-PUMP
c228941 SEBP1884
8J7390 FILTER GP Parts scheme
  For full view, you need register

Parts for your 219D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4686 [1] PLUG-O-RING  
2. 7J-5589 C [1] BOLT-FILTER  
3. 8F-9206 C [1] SEAL-O-RING  
4. 1H-8128 [1] SEAL-O-RING  
5. 5J-1095 [1] SEAT-VALVE  
6. 5J-1096 [1] VALVE  
7. 8J-7389 [1] COVER  
8. 9S-4191 [1] PLUG-O-RING  
9. 3J-1907 [2] SEAL  
10. 8J-7387 [1] HOUSING AS  
11. 3J-1997 [1] RETAINER-SPRING  
12. 7F-9802 [1] SPRING  
13. 3J-1162 [1] SPRING  
14. 2M-8729 [1] PIN-SPRING  
15. 4J-0816 [1] ELEMENT-FILTER (DISPOSABLE)  
  3G-5653 A [1] ELEMENT-FILTER (FIRE RESISTANT FLUID)  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP18840337
 

9T-9088: VALVE GP

9T9088 VALVE GP
COMBINATION
9T9176-PAGE 202, 9T1690-PAGE 203
PART OF 8R6383 LINES-PUMP
c477980 SEBP1884
9T9088 VALVE GP Parts scheme
  For full view, you need register

Parts for your 219D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8006 [1] PLUG-O-RING  
  2M-9780 [1] SEAL-O-RING  
2. 9T-1690 Y [1] VALVE GP  
3. 9J-3584 [2] SPRING  
4. 1U-1576 [2] PLUG AS  
  7M-8485 [2] SEAL-O-RING  
5. 9T-9176 Y [1] VALVE GP-RELIEF  
6. 3J-4567 [2] BOLT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP18840338
 

9J-6394: VALVE GP-RELIEF

9J6394 VALVE GP-RELIEF
COOLER BY-PASS & PILOT RELIEF
9J6395-PAGE 201
PART OF 8R6383 LINES-PUMP
c478308 SEBP1884
9J6394 VALVE GP-RELIEF Parts scheme
  For full view, you need register

Parts for your 219D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8008 [1] PLUG-O-RING  
2. 3D-2824 C [1] SEAL-O-RING  
3. 9J-6395 Y [1] VALVE GP-RELIEF  
4. 0T-0065 C [4] BOLT  
5. 4J-8997 [1] SEAL  
6. 4J-0519 [1] SEAL  
7. 5J-9078 [1] VALVE  
8. 3G-1799 [1] SPRING  
9. 9S-8001 [1] PLUG-O-RING  
  4J-7533 [1] SEAL-O-RING  
10. 0S-1588 C [4] BOLT  
11. 1B-8633 [6] SHIM  
12. 5C-4251 [1] COVER  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP18840339
 

9J-6395: VALVE GP-RELIEF

9J6395 VALVE GP-RELIEF
PART OF 9J6394 VALVE-RELIEF
c516492 SEBP1884
9J6395 VALVE GP-RELIEF Parts scheme
  For full view, you need register

Parts for your 219D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-7113 [1] VALVE GP  
2. 7L-8695 [1] SPRING  
3. 9S-8002 [1] PLUG-O-RING  
4. 3J-7354 [1] SEAL-O-RING (8.92MM ID)  
5. 8J-8838 [1] VALVE GP  
6. 1K-4066 [1] SPRING-COMPENSATOR  
7. 6J-3134 [1] SEAL  
8. 1B-4203 [1] NUT-FULL  
9. 8J-1752 [1] PLUNGER  
10. 5H-6005 [2] SEAL-O-RING  
11. 9T-4897 [1] RETAINER-VALVE  
12. 5P-7972 [1] BOLT-12 POINT HEAD  
13. [1] PLATE-IDENTIFICATION  
14. 4B-4158 [1] SCREW  
15. 5P-1893 [2] BOLT-12 POINT HEAD  
16. 3K-9077 [3] WASHER  
17. 1T-0720 [2] BOLT-12 POINT HEAD  
18. 4J-8996 [2] SEAL-O-RING  
19. 4J-5267 [2] SEAL (24.99MM ID)  
 

Information:

Tool Operating Manual
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28

Caterpillar Parts SIS Catalog 219D :

VALVE GP-CONTROL
3G-3817 VALVE GP-CONTROL
VALVE GP-SELECTOR
9T-3672 VALVE GP-SELECTOR
VALVE GP-CONTROL
3G-3818 VALVE GP-CONTROL
VALVE GP-PILOT
6E-4068 VALVE GP-PILOT
VALVE GP-PILOT
6E-3322 VALVE GP-PILOT
VALVE GP-PILOT
9T-2630 VALVE GP-PILOT
4E-9783 CONTROL GP-PILOT OPERATED HYD
4E-9783 CONTROL GP-PILOT OPERATED HYD
VALVE GP-PILOT
8J-4356 VALVE GP-PILOT
LINES GP-PUMP
8R-6383 LINES GP-PUMP
8R-6383 LINES GP-PUMP
LINES GP-PUMP
8R-6383 LINES GP-PUMP
8R-6383 LINES GP-PUMP
FILTER GP
8J-7390 FILTER GP
VALVE GP
9T-9088 VALVE GP
VALVE GP-RELIEF
9J-6394 VALVE GP-RELIEF

Truck sale:

1990 CAT 219D
USD $22,000 
1990 CAT 219D

WHAYNE SUPPLY CO INC
Somerset, Kentucky
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.