AIR INLET AND EXHAUST SYSTEM
LINES GP-AIRMANIFOLD GP-EXHAUST
MANIFOLD GP-INLET
MUFFLER GP
EXHAUST GP
TURBOCHARGER GP
FUEL SYSTEM
TANK GP-FUELCONTROL GP-GOVERNOR
AIR INLET AND EXHAUST SYSTEM
LINES GP-AIR
#SEBP18870130
4W-0753: LINES GP-AIR
For full view, you need register
Parts for your 578 PIPELAYER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-2444 | [1] | ELBOW | |
| 2. | 2N-8630 | [2] | GASKET | |
| 3. | 2P-3203 | [2] | BOLT-WASHER HEAD (3/8-16X1.25-IN) | |
| 4. | 2P-3202 | [4] | BOLT-WASHER HEAD (3/8-16X1.125-IN) | |
| 5. | 7C-1186 | [1] | BRACKET | |
| 6. | 2P-3205 C | [2] | BOLT-WASHER HEAD (3/8-16X1.75-IN) | |
| 6B-0933 C | [2] | SPACER (10.31X19.05X6.35-MM THK) | ||
| 7. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 8. | 1W-3092 | [1] | ELBOW-OUTLET | |
| 9. | 5S-1188 | [2] | SEAL-O-RING | |
| 10. | 5L-8854 | [2] | RING-SEALING | |
| 11. | 2N-8628 | [1] | COVER | |
| 12. | 4L-8337 | [2] | SEAL-O-RING | |
| 13. | 7W-8634 | [1] | SUPPORT-EXHAUST PIPE | |
| 14. | 2N-2765 | [2] | BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN) | |
| 15. | 2N-2766 | [2] | LOCKNUT (3/8-16-THD) | |
| 16. | 9L-5839 | [1] | COUPLING-EXHAUST | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP18870131
7C-0067: MANIFOLD GP-EXHAUST
7C-0067 MANIFOLD GP-EXHAUST
S/N 11N1-UP; 70V31500-99999
PART OF 137-9537, 2W-2652 ENGINE AR
S/N 11N1-UP; 70V31500-99999
PART OF 137-9537, 2W-2652 ENGINE AR
For full view, you need register
Parts for your 578 PIPELAYER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 104-5283 | [1] | MANIFOLD-EXHAUST (CENTER) | |
| 2. | 101-7352 | [2] | MANIFOLD-EXHAUST (END) | |
| 3. | 108-3612 | [11] | SPACER (11.13X19.05X53-MM THK) | |
| 4. | 129-9452 | [6] | GASKET-EXHAUST MANIFOLD | |
| 5. | 2S-3770 | [1] | SPACER (11X19X33.5-MM THK) | |
| 6. | 2N-2766 | [12] | LOCKNUT (3/8-16-THD) | |
| 7. | 5M-2894 | [12] | WASHER-HARD (10.2X18.5X2.5-MM THK) |
#SEBP18870132
1N-4471: MANIFOLD GP-INLET
1N-4471 MANIFOLD GP-INLET
S/N 11N1-UP; 70V31500-99999
PART OF 137-9537, 2W-2652 ENGINE AR
S/N 11N1-UP; 70V31500-99999
PART OF 137-9537, 2W-2652 ENGINE AR
For full view, you need register
Parts for your 578 PIPELAYER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 031-0219 | [11] | BOLT-LOCKING (3/8-16X1.75-IN) | |
| 2. | 9Y-8857 C | [1] | MANIFOLD-INLET | |
| 3. | 8T-6765 C | [3] | PLUG-PIPE (1/4-18-THD) | |
| 4. | 5D-9844 | [1] | BOLT-LOCKING (3/8-16X2-IN) | |
| 5. | 7W-6492 B | [1] | PLUG-PIPE (1/2-14-THD) | |
| 6. | 2N-8204 | [6] | GASKET | |
| 7. | 8T-6764 | [1] | PLUG-PIPE (1/8-27-THD) | |
| 8. | 8T-6762 | [1] | PLUG-PIPE (1/2-14-THD) | |
| 9. | 5M-2894 | [12] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 10. | 8B-8817 C | [1] | PLUG (PIPE-SQUARE COUNTERSUNK) | |
| 11. | 8T-6764 B | [1] | PLUG-PIPE (1/8-27-THD) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP18870133
2W-0584: MUFFLER GP
For full view, you need register
Parts for your 578 PIPELAYER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7S-4411 | [1] | CAP AS-RAIN (EXHAUST) | |
| 2. | 7C-2991 | [1] | EJECTOR AS | |
| 3. | 7N-5686 | [1] | CLAMP | |
| 4. | 0S-1608 | [1] | BOLT (3/8-16X3.75-IN) | |
| 5. | 1B-5355 | [1] | NUT-FULL (3/8-16-THD) | |
| 6. | 1W-3088 | [1] | CLAMP | |
| 7. | 164-9633 | [1] | MUFFLER AS | |
| 8. | 0S-1585 | [4] | BOLT (1/2-13X1.5-IN) | |
| 9. | 1D-4719 | [2] | NUT-FULL (1/2-13-THD) | |
| 10. | 5P-8245 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 11. | 1A-2029 | [2] | BOLT (3/8-16X1.125-IN) | |
| 12. | 9L-9132 | [2] | WASHER (10.2X25.5X2.5-MM THK) | |
| 13. | 7W-4123 | [1] | SUPPORT AS | |
| 14. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) |
#SEBP18870134
7E-8735: SHIELD GP-EXHAUST
For full view, you need register
Parts for your 578 PIPELAYER:
CATERPILLAR SIS#SEBP18870135
7C-0045: TURBOCHARGER GP
For full view, you need register
Parts for your 578 PIPELAYER:
CATERPILLAR SIS#SEBP18870136
7C-7691: TURBOCHARGER GP
For full view, you need register
Parts for your 578 PIPELAYER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7C-7503 Y | [1] | CARTRIDGE GP-TURBOCHARGER | |
| 2. | 7W-3843 | [1] | HOUSING-COMPRESSOR | |
| 3. | 7C-3173 | [1] | HOUSING | |
| 4. | 7W-7778 | [1] | CLAMP AS (COMPRESSOR) | |
| 7M-9918 | [1] | LOCKNUT (1/4-28-THD) | ||
| 5. | 5S-4517 | [1] | CLAMP AS (TURBINE) | |
| 7M-9918 | [1] | LOCKNUT (1/4-28-THD) | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP18870137
9P-9088: ADAPTER GP-FAST FILL FUEL
9P-9088 ADAPTER GP-FAST FILL FUEL
S/N 8HB1-UP
CANNOT BE USED WITH RIPPER
AN ATTACHMENT
S/N 8HB1-UP
CANNOT BE USED WITH RIPPER
AN ATTACHMENT
For full view, you need register
Parts for your 578 PIPELAYER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-1314 C | [1] | VENT AS-FUEL TANK | |
| 2. | 5T-8592 C | [1] | SEAL-BODY | |
| 3. | 9G-1711 | [1] | ELBOW | |
| 4. | 217-5703 | [1] | RECEIVER (FAST FILL FUEL) | |
| 5. | 9D-0630 | [1] | CAP-DUST (FAST FILL VALVE) | |
| 6. | 6V-0484 | [1] | ELBOW | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 7. | 1H-5728 C | [1] | SEAL-O-RING | |
| 8. | 8T-8917 | [4] | BOLT (1/2-13X1.25-IN) | |
| 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP18870138
9P-8031: CONTROL GP-GOVERNOR
For full view, you need register
Parts for your 578 PIPELAYER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2A-1736 | [1] | HANDLE | |
| 2. | 9W-6469 | [1] | LEVER (GOVERNOR CONTROL) | |
| 3. | 5S-7382 | [2] | BOLT (3/8-16X1.375-IN) | |
| 4. | 1B-8706 | [1] | KEY-WOODRUFF | |
| 5. | 5S-7379 | [3] | BOLT (3/8-16X0.875-IN) | |
| 6. | 8T-4896 | [7] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 7. | 9G-4484 | [1] | HOUSING AS | |
| 7D-8627 | [3] | LUG | ||
| 8. | 4L-9337 | [1] | BOLT (3/8-16X1.5-IN) | |
| 6V-8801 | [1] | NUT (3/8-16-THD) | ||
| 9. | 8T-2502 | [4] | BOLT (3/8-16X1.125-IN) | |
| 10. | 9G-4482 | [1] | LEVER | |
| 11. | 9B-7237 | [4] | BOLT (3/8-16X1.25-IN) | |
| 12. | 2K-4973 | [4] | LOCKNUT (3/8-16-THD) | |
| 13. | 4D-4064 | [8] | ROD END (3/8-24-THD) | |
| 14. | 6V-8183 | [8] | NUT-FULL (3/8-24-THD) | |
| 15. | 9P-7415 | [1] | LEVER | |
| 16. | 3L-2139 | [1] | ROD | |
| 17. | 4L-6454 | [2] | BOLT (3/8-16X1-IN) | |
| 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 18. | 6T-9318 | [1] | LINK AS | |
| 19. | 5D-1185 | [1] | ROD-CONTROL | |
| 20. | 4D-2258 | [1] | ROD-CONTROL | |
| 21. | 6V-5782 | [1] | BOLT (5/16-18X1.125-IN) | |
| 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 031-4155 | [1] | LOCKNUT (5/16-18-THD) | ||
| 22. | 8C-6561 | [1] | BOLT (5/16-18X1.375-IN) | |
| 6V-8189 | [1] | NUT (5/16-18-THD) | ||
| 23. | 9P-6579 | [1] | LEVER | |
| 24. | 8T-0192 | [1] | BOLT (3/8-16X2.25-IN) | |
| 25. | 9G-4459 | [1] | PEDAL | |
| 26. | 9G-4470 | [1] | COVER | |
| 27. | 6P-0593 | [2] | BEARING-ROLLER | |
| 28. | 1K-0502 | [7] | WASHER (16.3X25.4X1.2-MM THK) | |
| 29. | 6H-0190 | [6] | WASHER (19.8X31.75X1.6-MM THK) | |
| 30. | 9G-4483 | [1] | SHAFT | |
| 31. | 6D-3787 | [2] | BEARING-ROLLER | |
| 32. | 9G-4481 | [1] | SHAFT | |
| 33. | 8H-9180 | [2] | SEAL-LIP TYPE | |
| 34. | 5H-7152 | [1] | SPRING | |
| 35. | 9M-3025 | [1] | COVER AS | |
| 2K-2605 | [1] | BEARING | ||
| 36. | 7M-6955 | [1] | GASKET | |
| 37. | 7G-3088 | [1] | PLATE | |
| 38. | 3K-3534 | [1] | BUSHING | |
| 39. | 9G-4473 | [1] | SHAFT | |
| 40. | 8M-7836 | [1] | SHAFT AS-CONTROL | |
| 9M-6970 | [2] | DOWEL | ||
| 41. | 4L-9337 | [7] | BOLT (3/8-16X1.5-IN) | |
| 42. | 6V-8801 | [8] | NUT (3/8-16-THD) | |
| 43. | 3D-9777 | [1] | LEVER | |
| 44. | 1B-8704 | [7] | KEY-WOODRUFF | |
| 45. | 2K-4973 | [6] | LOCKNUT (3/8-16-THD) | |
| 46. | 9B-7237 | [5] | BOLT (3/8-16X1.25-IN) | |
| 47. | 8T-9375 | [1] | BOLT (3/8-16X1.75-IN) | |
| 48. | 4D-4064 | [2] | ROD END (3/8-24-THD) | |
| 49. | 6V-8183 | [2] | NUT-FULL (3/8-24-THD) | |
| 50. | 5D-1849 | [1] | LEVER | |
| 51. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
| 52. | 8T-4896 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 53. | 5S-7379 | [4] | BOLT (3/8-16X0.875-IN) | |
| 54. | 9W-0975 | [1] | SHAFT | |
| 55. | 9W-0979 | [1] | PLATE AS | |
| 56. | 5H-6933 | [1] | LEVER | |
| 57. | 9W-0976 | [1] | PLATE AS | |
| 58. | 5K-0906 | [4] | BOLT (5/16-18X0.625-IN) | |
| 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 59. | 5T-8919 | [2] | BEARING | |
| 60. | 4K-5973 | [3] | LEVER | |
| 61. | 5D-6857 | [1] | LEVER | |
| 62. | 9G-4485 | [1] | SHAFT | |
| 63. | 9G-4475 | [1] | BRACKET AS | |
| 6P-0593 | [2] | BEARING-ROLLER | ||
| 64. | 9G-4477 | [1] | ROD | |
| 65. | 5P-2675 | [4] | BOLT (1/4-20X1.75-IN) | |
| 66. | 8H-9186 | [2] | SPRING | |
| 67. | 1B-8735 | [1] | KEY-WOODRUFF | |
| 68. | 8H-9182 | [2] | ROLLER-GOVERNOR CONTROL | |
| 69. | 8H-7577 | [1] | PLATE-LOCK |
#SEBP18870139
9P-8031: CONTROL GP-GOVERNOR
For full view, you need register
Parts for your 578 PIPELAYER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2A-1736 | [1] | HANDLE | |
| 2. | 107-3734 | [1] | LEVER (GOVERNOR CONTROL) | |
| 3. | 5S-7382 | [3] | BOLT (3/8-16X1.375-IN) | |
| 4. | 3K-3534 | [1] | BUSHING | |
| 5. | 5S-7379 | [3] | BOLT (3/8-16X0.875-IN) | |
| 6. | 8T-4896 | [7] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 7. | 9G-4484 | [1] | HOUSING AS | |
| 7D-8627 | [3] | LUG | ||
| 8. | 9G-4473 | [1] | SHAFT | |
| 9. | 8T-2502 | [4] | BOLT (3/8-16X1.125-IN) | |
| 10. | 9G-4482 | [1] | LEVER | |
| 11. | 9B-7237 | [4] | BOLT (3/8-16X1.25-IN) | |
| 12. | 2K-4973 | [4] | LOCKNUT (3/8-16-THD) | |
| 13. | 4D-4064 | [8] | ROD END (3/8-24-THD) | |
| 14. | 6V-8183 | [8] | NUT-FULL (3/8-24-THD) | |
| 15. | 9P-7415 | [1] | LEVER | |
| 16. | 3L-2139 | [1] | ROD | |
| 17. | 4L-6454 | [2] | BOLT (3/8-16X1-IN) | |
| 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 18. | 6T-9318 | [1] | LINK AS | |
| 19. | 5D-1185 | [1] | ROD-CONTROL | |
| 20. | 4D-2258 | [1] | ROD-CONTROL | |
| 21. | 6V-5782 | [1] | BOLT (5/16-18X1.125-IN) | |
| 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 031-4155 | [1] | LOCKNUT (5/16-18-THD) | ||
| 22. | 8C-6561 | [1] | BOLT (5/16-18X1.375-IN) | |
| 6V-8189 | [1] | NUT (5/16-18-THD) | ||
| 23. | 9P-6579 | [1] | LEVER | |
| 24. | 8T-0192 | [1] | BOLT (3/8-16X2.25-IN) | |
| 25. | 9G-4459 | [1] | PEDAL | |
| 26. | 9G-4470 | [1] | COVER | |
| 27. | 6P-0593 | [2] | BEARING-ROLLER | |
| 28. | 1K-0502 | [7] | WASHER (16.3X25.4X1.2-MM THK) | |
| 29. | 6H-0190 | [6] | WASHER (19.8X31.75X1.6-MM THK) | |
| 30. | 8M-7836 | [1] | SHAFT AS-CONTROL | |
| 9M-6970 | [2] | DOWEL | ||
| 31. | 6D-3787 | [2] | BEARING-ROLLER | |
| 32. | 9G-4481 | [2] | SHAFT | |
| 33. | 8H-9180 | [2] | SEAL-LIP TYPE | |
| 34. | 5H-7152 | [1] | SPRING | |
| 35. | 9M-3025 | [1] | COVER AS | |
| 2K-2605 | [1] | BEARING | ||
| 36. | 7M-6955 | [1] | GASKET | |
| 37. | 7G-3088 | [1] | PLATE | |
| 38. | 4L-9337 | [7] | BOLT (3/8-16X1.5-IN) | |
| 39. | 6V-8801 | [8] | NUT (3/8-16-THD) | |
| 40. | 3D-9777 | [1] | LEVER | |
| 41. | 1B-8704 | [7] | KEY-WOODRUFF | |
| 42. | 2K-4973 | [6] | LOCKNUT (3/8-16-THD) | |
| 43. | 9B-7237 | [5] | BOLT (3/8-16X1.25-IN) | |
| 44. | 8T-9375 | [1] | BOLT (3/8-16X1.75-IN) | |
| 45. | 4D-4064 | [2] | ROD END (3/8-24-THD) | |
| 46. | 6V-8183 | [2] | NUT-FULL (3/8-24-THD) | |
| 47. | 5D-1849 | [1] | LEVER | |
| 48. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
| 49. | 8T-4896 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 50. | 5S-7379 | [4] | BOLT (3/8-16X0.875-IN) | |
| 51. | 9W-0975 | [1] | SHAFT | |
| 52. | 9W-0979 | [1] | PLATE AS | |
| 53. | 5H-6933 | [1] | LEVER | |
| 54. | 9W-0976 | [1] | PLATE AS | |
| 55. | 5K-0906 | [4] | BOLT (5/16-18X0.625-IN) | |
| 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 56. | 5T-8919 | [2] | BEARING | |
| 57. | 4K-5973 | [3] | LEVER | |
| 58. | 5D-6857 | [1] | LEVER | |
| 59. | 9G-4485 | [1] | SHAFT | |
| 60. | 9G-4475 | [1] | BRACKET AS | |
| 6P-0593 | [2] | BEARING-ROLLER | ||
| 61. | 9G-4477 | [1] | ROD | |
| 62. | 5P-2675 | [4] | BOLT (1/4-20X1.75-IN) | |
| 63. | 8H-9186 | [2] | SPRING | |
| 64. | 1B-8735 | [1] | KEY-WOODRUFF | |
| 65. | 8H-9182 | [2] | ROLLER-GOVERNOR CONTROL | |
| 66. | 8H-7577 | [1] | PLATE-LOCK |
