7G-4774 WINCH AR-TOWING S/N 9EB1-UP PART OF 9W-6541 WINCH AR-TOWING FOR USE WITH 7T-0409 INSTALLATION AR-WINCH AN ATTACHMENT 578

Part No	Qty	Parts name
7G-4787 Y	[1]	CASE & COVERS GP-WINCH
7G-4775 Y	[1]	CLUTCH & GEAR GP-WINCH
3T-9923 Y	[1]	CONTROL GP-WINCH
7G-1181 Y	[1]	COVER GP-SHIPPING
7G-4788 Y	[1]	LINES GP-WINCH
7G-4786 Y	[1]	SCREEN GP-MAGNETIC

9X-8793	[2]	FILM-IDENTIFICATION (CAT)
		(1 EACH SIDE ABOVE DRUM SHAFT)
102-9480	[1]	FILM-INSTRUCTION (WINCH)
		(IN CAB NEAR CONTROL LEVER)
Y		SEPARATE ILLUSTRATION

#SEBP18870391

9W-6541: WINCH AR-TOWING

WINCH AR-TOWING

9W-6541 WINCH AR-TOWING
S/N 9EB1-UP
POWERSHIFT-LOW SPEED
AN ATTACHMENT

i00433198 SEBP1887

For full view, you need register

Parts for your 578 PIPELAYER:

CATERPILLAR SIS

Part No	Qty	Parts name
9W-6542 Y	[1]	CONVERSION GP-WINCH
7G-4774 Y	[1]	WINCH AR-TOWING
Y		SEPARATE ILLUSTRATION

#SEBP18870392

9P-7434: WINCH GP-HOOK

WINCH GP-HOOK

9P-7434 WINCH GP-HOOK
S/N 9CA1-UP
PART OF 9P-7433 WINCH AR-PIPELAYER

i00441238 SEBP1887

For full view, you need register

Parts for your 578 PIPELAYER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8S-9089	[10]	BOLT (1/2-13X4.5-IN)
2.	5P-8245	[16]	WASHER-HARD (13.5X25.5X3-MM THK)
3.	7G-6891	[1]	COVER
4.	5F-3144	[3]	SEAL-O-RING
5.	7G-6876	[1]	SPRING
6.	7G-6352	[1]	RACE-FREEWHEEL
7.	7G-6877	[1]	CLUTCH AS-SPRAG
8.	7G-6892	[1]	SUPPORT AS-BEARING
9.	0S-1585	[5]	BOLT (1/2-13X1.5-IN)
10.	9S-1366	[1]	BOLT (1/2-13X2.5-IN)
11.	7G-6894	[1]	HOUSING-SUPPORT
12.	4N-1230	[1]	SEAL-O-RING
13.	6T-8013	[1]	RING-SEAL (55.09-MM ID)
14.	1J-3628	[1]	RING-RETAINING
15.	3L-3296	[1]	BALL BEARING
16.	0S-1589	[11]	BOLT (5/8-11X1.75-IN)
17.	5P-8247	[26]	WASHER-HARD (17X32X3.5-MM THK)
18.	3K-0158	[1]	SEAL-LIP TYPE
19.	6V-6640 B		SEALANT
20.	7G-6895	[1]	CAGE-BEARING
21.	0L-0139	[1]	BOLT (3/8-24X2.75-IN)
22.	5V-7190	[1]	WASHER-HARD (10.5X45.2X6-MM THK)
23.	7G-6878	[1]	RACE-FREEWHEEL
24.	7G-6880	[1]	SLEEVE
25.	4B-1127	[1]	RING-SNAP
26.	6T-8012	[2]	RING-SEAL (73.9-MM ID)
27.	7G-6883	[1]	PISTON
28.	6V-5085	[2]	BEARING-THRUST
29.	6V-5084	[2]	RACE-THRUST BEARING
30.	7G-6887	[1]	SPRING
31.	6T-8014	[1]	SPACER
32.	7G-6884	[1]	PISTON
33.	6T-4021	[1]	SHAFT
34.	6V-2302	[2]	RING-RETAINING
35.	3S-1307	[6]	BOLT-12 POINT HEAD (3/8-16X2-IN)
36.	3S-0004	[6]	WASHER (0.406X0.728X0.09-IN THK)
37.	0S-1625	[15]	BOLT (5/8-11X2.5-IN)
38.	8P-8103	[1]	GEAR-RING (70-TEETH)
39.	7G-6896	[1]	FLANGE-SUPPORT
40.	8L-9241	[1]	SEAL-O-RING
41.	8P-8090	[1]	COUPLER
42.	6T-4026	[1]	COUPLER AS
43.	8P-8094	[1]	GEAR-COUPLING (52-TEETH)
44.	2H-3548	[1]	RING-RETAINING
45.	1T-0994	[1]	BALL BEARING
46.	1H-8142	[1]	RING-RETAINING
47.	1M-4093	[1]	RING-RETAINING
48.	3K-2556	[1]	RING-RETAINING
49.	3K-2518	[1]	BALL BEARING
50.	4S-8670	[6]	SHAFT-PLANETARY
51.	3S-8109	[6]	PIN-SPRING
52.	7T-3136	[12]	DISC-THRUST
53.	5M-2055	[12]	BEARING-CAGED (NEEDLE)
54.	7G-3454	[6]	GEAR (17-TEETH)
55.	7G-6897	[1]	CARRIER-PLANETARY
56.	6T-4024	[1]	SLEEVE
57.	6T-4022	[1]	SPACER
58.	6T-4023	[1]	PLATE
59.	6T-5607	[6]	SPRING-DISC
60.	6T-4366	[1]	PLATE
61.	6V-7424	[1]	RING-RETAINING
62.	9L-9132	[1]	WASHER (10.2X25.5X2.5-MM THK)
63.	1D-4706	[1]	BOLT (3/8-16X6-IN)
64.	8P-8095	[1]	CARRIER-PLANETARY
65.	6T-7799	[8]	DISC-THRUST
66.	1P-4146	[4]	ROLLER AS (NEEDLE BEARING)
67.	8P-8096	[4]	GEAR-PLANETARY (34-TEETH)
68.	2S-4899	[4]	SHAFT-PLANETARY
69.	3S-2708	[4]	PIN-SPRING
70.	8P-8098	[1]	GEAR-RING (90, 88-TEETH)
71.	9P-8244	[1]	DRUM
72.	4K-5175	[2]	BOLT-12 POINT HEAD (1/2-13X1.5-IN)
73.	3T-1108	[1]	CLAMP
74.	9S-8006	[1]	PLUG (7/8-14-THD)
75.	2M-9780	[1]	SEAL-O-RING
76.	8P-8730	[1]	SHAFT-CENTER
77.	2H-3548	[1]	RING-RETAINING
78.	8P-8099	[1]	SHAFT-CENTER
79.	7B-1297	[1]	RING-SNAP
80.	9P-2693	[1]	CARRIER AS
81.	4H-8380	[1]	PIN-SPRING
82.	8P-8101	[4]	SHAFT-PLANETARY
83.	3S-2708	[4]	PIN-SPRING
84.	7T-3145	[8]	DISC-THRUST
85.	5M-7925	[8]	BEARING AS-ROLLER (NEEDLE)
86.	8P-8102	[4]	GEAR-PLANETARY (24 TEETH)
87.	8P-8105	[4]	SPACER
88.	8P-8104	[1]	SLINGER-OIL
89.	0T-0102	[4]	BOLT (3/8-16X0.625-IN)
90.	5P-2236	[1]	SEAL-O-RING
91.	9P-9023	[1]	HUB
92.	5P-8247	[30]	WASHER-HARD (17X32X3.5-MM THK)
93.	7K-3116	[30]	BOLT-12 POINT HEAD (5/8-11X3.5-IN)
94.	2S-8939	[1]	RING-RETAINING
95.	5P-5423	[1]	BEARING-ROLLER (NEEDLE)
96.	5K-5129	[1]	RING-SEALING
97.	9H-9849	[1]	BEARING
98.	5P-6928	[1]	RACE-BEARING OUTER
99.	5P-7003	[1]	SEAL-LIP TYPE
100.	6V-6640 B		SEALANT
101.	4F-7952	[1]	SEAL-O-RING
102.	9P-8584	[1]	CAGE AS-SUPPORT
103.	9P-8583	[1]	PLUG-CUP
104.	8M-8659	[2]	DOWEL
105.	3J-1907	[1]	SEAL-O-RING
106.	9S-8004	[1]	PLUG (9/16-18-THD)
107.	9S-8005	[1]	PLUG (3/4-16-THD)
108.	3K-0360	[1]	SEAL-O-RING
109.	2M-3340	[1]	SEAL-O-RING
110.	9P-1343	[1]	SEAL-TEFLON (69.13-MM ID)
111.	8P-8731	[1]	WASHER-THRUST (9-MM THK)
112.	034-3223	[1]	SCREW
113.	5P-8248	[14]	WASHER-HARD (20X36.5X3.5-MM THK)
114.	3B-2968	[12]	BOLT (3/4-10X3.5-IN)
115.	0S-1756	[2]	BOLT (3/4-10X4.25-IN)
116.	8P-8738	[1]	HOUSING-BRAKE
117.	8P-8736	[7]	DISC-FRICTION
118.	8P-8737	[7]	PLATE-CLUTCH
119.	6V-1861	[1]	BEARING AS-NEEDLE
120.	5P-6047	[1]	RING-RETAINING
121.	7G-8986	[1]	PLATE-SLIDE
122.	7G-8987	[1]	RACE-FREEWHEEL
123.	7G-8991	[1]	GEAR-RING (79-TEETH)
124.	7G-8984	[1]	CAMSHAFT AS
125.	7G-8983	[1]	CAGE AS
126.	7G-8981	[4]	PIN-GUIDE
127.	7G-8982	[4]	SPRING
128.	7G-8980	[22]	ROLLER-FREEWHEEL
129.	7G-6068	[1]	GEAR-PUMP DRIVE (79 T)
130.	5P-6047	[1]	RING-RETAINING
131.	5P-5423	[1]	BEARING-ROLLER (NEEDLE)
132.	6V-1199	[1]	BEARING
133.	9P-1343	[1]	SEAL-TEFLON (69.13-MM ID)
134.	034-3223	[1]	SCREW
135.	8P-8731	[1]	WASHER-THRUST (9-MM THK)
136.	9P-3222	[1]	CAGE AS-BEARING
137.	2K-5986	[1]	PIN-SPRING
138.	7T-3146	[1]	DISC-THRUST
139.	8P-8740	[1]	COUPLING
140.	8N-7294	[1]	RETAINER-PIN
141.	8P-8765	[1]	WASHER-HARD (8-MM THK)
142.	0L-0139	[1]	BOLT (3/8-24X2.75-IN)
143.	6V-1175	[2]	SEAL-O-RING
144.	8P-8748	[1]	RING-RETAINING
145.	8P-8747	[1]	PISTON
146.	8P-8746	[1]	RING-SEAL INTERNAL
147.	7G-1023	[1]	PISTON AS
148.	6V-4371	[1]	PLATE-WARNING (HIGH SPRING LOAD)
	4B-4158	[3]	SCREW-DRIVE (NO 4X0.25-IN)
149.	5H-6202	[1]	PIN
150.	8P-8744	[1]	RING-SEAL EXTENSION
151.	8P-8743	[8]	SPRING
152.	8P-8742	[8]	SPRING
153.	8P-8741	[8]	SPRING
154.	6H-5474	[1]	RING-RETAINING
155.	7G-6067	[1]	GEAR-PUMP DRIVE (25 T)
156.	3T-6208	[2]	DISC-THRUST
157.	5P-6724	[2]	BEARING-ROLLER
158.	1B-8735	[2]	KEY-WOODRUFF
159.	8P-8941	[1]	SHAFT
160.	3J-7354	[1]	SEAL-O-RING
161.	9G-0305	[1]	BOLT
162.	8P-8943	[1]	GEAR (32-TEETH)
163.	4D-6432	[1]	LOCKNUT (7/16-20-THD)
164.	3K-0360	[1]	SEAL-O-RING
165.	9S-4185	[1]	PLUG (3/4-16-THD)
166.	5P-8245	[10]	WASHER-HARD (13.5X25.5X3-MM THK)
167.	2A-1531	[1]	BOLT (1/2-13X6.5-IN)
168.	8F-8733	[1]	SEAL-O-RING
169.	5P-8248	[4]	WASHER-HARD (20X36.5X3.5-MM THK)
170.	2J-3506	[4]	NUT-FULL (3/4-10-THD)
171.	6V-3266	[3]	BOLT (5/8-11X9.5-IN)
172.	5P-8247	[3]	WASHER-HARD (17X32X3.5-MM THK)
173.	5M-2894	[5]	WASHER-HARD (10.2X18.5X2.5-MM THK)
174.	0S-1590	[5]	BOLT (3/8-16X2-IN)
175.	1D-4569	[9]	BOLT (1/2-13X4.25-IN)
176.	0S-1624	[3]	BOLT (5/8-11X1-IN)
177.	8N-4410	[3]	WASHER
178.	9P-2324	[1]	HOUSING AS
179.	1P-0604	[1]	PLUG-CUP
180.	2D-8369	[4]	STUD-TAPERLOCK
181.	6V-3361	[1]	PLATE-WARNING (HIGH SPRING LOAD)(HIGH SPRING LOAD)
	4B-4158	[4]	SCREW-DRIVE (NO 4X0.25-IN)
182.	2M-9780	[1]	SEAL-O-RING
183.	3H-4190	[1]	PLUG-DRAIN
184.	9W-8318	[1]	SPACER
185.	5P-8244	[1]	WASHER-HARD (12X22.5X2.5-MM THK)
186.	2M-9780	[2]	SEAL-O-RING
187.	7T-6737	[1]	HOUSING
188.	9S-8006	[2]	PLUG (7/8-14-THD)
189.	7X-0299	[2]	BOLT (3/8-16-THD)
190.	8T-4896	[5]	WASHER-HARD (10.2X18.5X2.5-MM THK)
191.	7T-6733	[1]	GASKET
192.	7T-6736	[1]	COVER
193.	7X-0292	[3]	BOLT (3/8-16X4.5-IN)
194.	7T-6445	[1]	LEVER AS
195.	9U-8222	[1]	LEVER AS
196.	1B-8705	[1]	KEY-WOODRUFF
197.	9B-7237	[1]	BOLT (3/8-16X1.25-IN)
198.	8T-2501	[1]	BOLT (3/8-16X2-IN)
199.	9S-9302	[2]	BEARING-ROLLER
200.	7K-2135	[2]	BEARING-ROLLER
201.	6J-2419	[2]	SEAL-O-RING
202.	7T-6441	[1]	LEVER AS
203.	2N-6272	[1]	DOWEL
204.	7T-6732	[2]	KEEPER
205.	1B-8704	[1]	KEY-WOODRUFF
206.	7T-6442	[1]	LEVER AS
207.	2N-6272	[1]	DOWEL
	B		USE AS REQUIRED

#SEBP18870393

3B-3460: BOX GP-TOOL

BOX GP-TOOL

3B-3460 BOX GP-TOOL
S/N 8HB1-UP
PART OF 9P-7399 CHASSIS AR

i00362894 SEBP1887

For full view, you need register

Parts for your 578 PIPELAYER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-3427	[1]	BOX AS-TOOL
2.	5S-7383	[4]	BOLT (3/8-16X1.75-IN)
	1D-4717	[4]	NUT (3/8-16-THD)
	5P-1075	[8]	WASHER-HARD (10.2X22.5X3-MM THK)
	3K-1470	[4]	SPACER (0.4X1X0.38-IN THK)
3.	5P-8502	[1]	PADLOCK GP
	8Y-6364 A	[1]	SLEEVE
	5P-8500 A	[1]	KEY
	A		NOT PART OF THIS GROUP

#SEBP18870394

9G-9288: CAP GP-PROTECTION

CAP GP-PROTECTION

9G-9288 CAP GP-PROTECTION
S/N 8HB1-UP
PART OF 6T-9945 PROTECTION AR-VANDALISM
AN ATTACHMENT

i00092951 SEBP1887

For full view, you need register

Parts for your 578 PIPELAYER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1L-5072	[1]	DOWEL
2.	9M-7394	[1]	LEVER (HYDRAULIC TANK FILL)
3.	5D-1911	[1]	COVER-HYDRAULIC CAP
4.	2J-7761	[1]	RING-RETAINING
5.	246-2641	[1]	PADLOCK GP
	5P-8500	[1]	KEY

#SEBP18870395

7G-1181: COVER GP-SHIPPING

COVER GP-SHIPPING

7G-1181 COVER GP-SHIPPING
S/N 9EB1-UP; 1MK1-UP
WINCH
PART OF 6Y-6916, 7G-4774 WINCH AR-TOWING
AN ATTACHMENT

i00393103 SEBP1887

For full view, you need register

Parts for your 578 PIPELAYER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1P-4577	[2]	FLANGE-HALF
	8M-4987	[1]	SEAL-O-RING
2.	7B-3235	[4]	BOLT (1/2-13X1.375-IN)
	5P-8245 C	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
3.	1P-4579	[2]	FLANGE-HALF
	4J-0524	[1]	SEAL-O-RING
4.	0S-1588	[4]	BOLT (3/8-16X1.25-IN)
	5M-2894 C	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE

#SEBP18870396

6V-0311: FILM GP

FILM GP

6V-0311 FILM GP
S/N 8HB1-UP
FIELD INSTALLATION

i01069437 SEBP1887

For full view, you need register

Parts for your 578 PIPELAYER:

CATERPILLAR SIS

Part No	Qty	Parts name
2P-0931	[2]	FILM (CAT)
8S-3942	[1]	FILM-IDENTIFICATION (CATERPILLAR)
8S-8974	[1]	FILM-IDENTIFICATION (CATERPILLAR)

#SEBP18870397

128-2922: KIT-GASKET

KIT-GASKET

128-2922 KIT-GASKET
S/N 8HB1-UP
CONTAINS THE GASKETS & SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES.
FOR USE WITH E573- ENGINE S/N 7CZ1-UP, E571- ENGINE S/N 1MM117-UP, E572- ENGINE S/N 6NZ1-UP, 9NZ1-UP, E399- ENGINE S/N 5EK1-UP, 6TS1-UP, T276- MACHINE S/N 58X1-UP
FIELD INSTALLATION

i04724160 SEBP1887

For full view, you need register

Parts for your 578 PIPELAYER:

CATERPILLAR SIS

Part No	Qty	Parts name
1L-8212	[1]	GASKET
2N-0931	[1]	GASKET
383-3683 ABJ	[1]	GASKET
4N-0699	[1]	GASKET
4N-0933	[1]	GASKET
7C-0307	[3]	GASKET (REGULATOR HOUSING, OUTLET)
104-8585	[1]	GASKET-REGULATOR
390-0941 ABJ	[1]	GASKET-REGULATOR
139-3550	[1]	GASKET-REGULATOR (HOUSING)
4N-1156	[1]	GASKET-REGULATOR COVER
4W-4014	[1]	GASKET-REGULATOR HOUSING
9Y-2588	[1]	GASKET-REGULATOR HOUSING
125-0434	[1]	SEAL-INTEGRAL (WATER TEMPERATURE REGULATOR)
9M-3786	[1]	SEAL-O-RING
109-0076	[1]	SEAL-O-RING
109-0077	[3]	SEAL-O-RING
156-5198	[1]	SEAL-O-RING
A		NOT PART OF THIS GROUP
B		USE AS REQUIRED
J		CLASSIC OPTIONAL SERVICE REPLACEMENT

#SEBP18870398

160-9874: KIT-GASKET

KIT-GASKET

160-9874 KIT-GASKET -SINGLE CYLINDER LINER
S/N 8HB1-UP
FOR USE WITH PQ0863
FIELD INSTALLATION

i04946741 SEBP1887

For full view, you need register

Parts for your 578 PIPELAYER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9L-5854	[1]	BAND-FILLER (130.2-MM ID)
2.	110-2220	[1]	SEAL-LINER (MID)
3.	142-7072	[1]	SEAL-LINER (COOLANT)
4.	142-6217	[1]	SEAL-O-RING

			FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

			HTTP://DEALER.CAT.COM/RELATED

#SEBP18870399

233-9465: KIT-GASKET

KIT-GASKET

233-9465 KIT-GASKET
S/N 8HB1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD.. KIT INCLUDES TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINE WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE
FIELD INSTALLATION

i06719030 SEBP1887

For full view, you need register

Parts for your 578 PIPELAYER:

CATERPILLAR SIS

Part No	Qty	Parts name
2N-8204	[6]	GASKET
2N-8630	[2]	GASKET
7C-0307	[1]	GASKET
6I-3066	[1]	GASKET-CYLINDER HEAD
129-9452	[6]	GASKET-EXHAUST MANIFOLD
1S-4810	[1]	GASKET-OIL DRAIN
1S-6595	[1]	GASKET-OIL SUPPLY
6I-4024	[1]	GASKET-PLATE
4N-1156	[1]	GASKET-REGULATOR COVER
5P-5678 D		SEAL (6-M)
3E-6772	[24]	SEAL (WATER)
3S-9643	[1]	SEAL-LIP TYPE
3S-5496	[4]	SEAL-O-RING
4F-7390	[1]	SEAL-O-RING
214-7568	[4]	SEAL-O-RING
8C-5196	[3]	SEAL-O-RING
8L-2779	[6]	SEAL-O-RING
109-0076	[1]	SEAL-O-RING
117-1385	[6]	SEAL-O-RING
8H-9204	[6]	WASHER-FELT (19/32X7/8X5/16-IN THK)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED
D		ORDER BY THE METER