AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8C-9430 HYDRAULIC GP-GRAPPLE S/N 8ZF1-99999; 3NG1-99999 HSG 100 INCH ICE TONG PART OF 8C-7945, 9U-9727 GRAPPLE AR AN ATTACHMENT D4HTSK II


HYDRAULIC SYSTEM
HYDRAULIC GP
LINES GP-CYLINDER
LINES GP-GRAPPLE
LINES GP-CYLINDER
LINES GP-PUMP

TRACK SKIDDER D4HTSK II TRACK SKIDDER 8ZF
 D4H Track-Type Skidder Series II 8ZF00001-UP (MACHINE) POWERED BY 3204 Engine SEBP1888 D4HTSK II 8ZF   (1989)

HYDRAULIC SYSTEM

HYDRAULIC GP
HYDRAULIC GP-GRAPPLE
8C-9416 HYDRAULIC GP-GRAPPLE
HYDRAULIC GP-GRAPPLE
8C-9430 HYDRAULIC GP-GRAPPLE
 

#SEBP18880210
 

8C-9430: HYDRAULIC GP-GRAPPLE

8C-9430 HYDRAULIC GP-GRAPPLE
S/N 8ZF1-99999; 3NG1-99999
HSG 100 INCH ICE TONG
PART OF 8C-7945, 9U-9727 GRAPPLE AR
AN ATTACHMENT
i00429198 SEBP1888
8C9430 HYDRAULIC GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your D4HTSK II TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-9401 Y [1] MOTOR GP-HYDRAULIC  
2. 8C-9420 [2] PLUG-PIPE  
3. 8C-9417 [4] SWIVEL JOINT  
4. 8S-4951 [2] CAP  
5. 8C-9429 Y [2] CYLINDER GP-GRAPPLE  
6. 3B-7255 [2] BUSHING-TERMINAL  
7. 8C-9418 [2] PIPE  
8. 5P-3273 [2] ELBOW-FLARED  
9. 8S-4950 [2] CAP  
10. 8C-9432 [2] HOSE AS-HYDRAULIC  
11. 8C-9431 [2] HOSE AS-HYDRAULIC  
12. 3K-0360 [2] SEAL-O-RING (16.36MM ID)  
13. 8C-9402 [1] MANIFOLD-RH  
14. 8C-9403 [1] MANIFOLD-LH  
15. 0S-1589 [4] BOLT (5/8-11X1.75IN)  
16. 3B-4510 [4] LOCKWASHER  
17. 8L-3282 [4] CONNECTOR-FLARED  
18. 8C-9399 [1] LINK-DRIVE  
19. 8C-9400 [1] SPIDER  
20. 0S-1603 [4] BOLT (1/2-20X1.5IN)  
21. 3B-4508 [4] LOCKWASHER (3.84MM THK)  
22. 5F-8807 [2] BOLT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP18880211
 

1U-2387: LINES GP-ANGLE & TILT

1U-2387 LINES GP-ANGLE & TILT
S/N 5NH1-99999
CYLINDER
PART OF 9N-4804 BULLDOZER AR-ANGLING
AN ATTACHMENT
i00354029 SEBP1888
1U2387 LINES GP-ANGLE & TILT Parts scheme 1U2387 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D4HTSK II TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-9783 I [2] HOSE AS  
2. 4T-9784 I [2] HOSE AS  
3. 4T-9786 I [2] HOSE AS  
4. 6V-8398 [12] SEAL-O-RING (12.47MM ID)  
5. 6V-8625 [2] ELBOW-90 DEGREE (3/4-16 THD)  
6. 3K-0360 [4] SEAL-O-RING (16.36MM ID)  
7. 6V-8942 [2] REDUCER-O-RING  
  6V-9746 [2] SEAL-O-RING (18.94MM ID)  
  6V-8556 [2] NUT (1 3/16-12 THD)  
8. 4T-9781 [2] TUBE AS  
9. 4T-9788 I [1] HOSE AS  
10. 4T-9789 I [1] HOSE AS  
11. 6V-8639 [2] CONNECTOR-SEAL  
12. 4T-2139 [2] GUARD AS  
13. 5P-2566 C [6] BOLT (1/2-13X1.50IN)  
  8T-4223 [6] WASHER-HARD (3MM THK)  
  1K-6872 [6] LOCKNUT (1/2-13 THD)  
14. 5P-7464 [6] CLIP (SLOT)  
15. 5P-7465 [6] CLIP (TAB)  
16. 6V-1249 [6] GROMMET (22.00MM OD)  
17. 5C-6565 C [21] BOLT (1/2-13X1.25IN)  
18. 8T-4223 C [22] WASHER-HARD (3MM THK)  
19. 7S-3916 [6] CLIP (TAB)  
  7S-3919 [6] CLIP (SLOT)  
20. 6V-8942 [2] REDUCER-O-RING  
  6V-8556 [2] NUT (1 3/16-12 THD)  
  6V-9746 [2] SEAL-O-RING (18.94MM ID)  
21. 6V-8398 [4] SEAL-O-RING (12.47MM ID)  
22. 4T-2136 [1] CLAMP  
23. 8T-9384 [2] BOLT (1/2-13X.875IN)  
24. 4T-9780 [1] GUARD  
25. 6V-8639 [2] CONNECTOR-SEAL  
  3K-0360 [2] SEAL-O-RING (16.36MM ID)  
26. 5S-7379 [2] BOLT (3/8-16X.875IN)  
  8T-4896 [2] WASHER-HARD (2.5MM THK)  
  2K-4973 [2] LOCKNUT (3/8-16 THD)  
27. 7L-7304 [1] CLIP  
28. 4T-1848 [1] CLAMP  
29. 6Y-2456 C [1] PLATE AS-LH  
30. 6Y-2506 C [1] PLATE AS-RH  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
 

#SEBP18880212
 

8G-4485: LINES GP-ANGLE & TILT

8G-4485 LINES GP-ANGLE & TILT
PIN 8ZF1-99999
Type 1
i00421827 SEBP1888
8G4485 LINES GP-ANGLE & TILT Parts scheme 8G4485 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D4HTSK II TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8713 [2] CONNECTOR-SEAL  
  3D-2824 [2] SEAL-O-RING (23.47MM ID)  
2. 3P-5903 [1] CLIP (TAB)  
  3P-5904 [1] CLIP (SLOT)  
3. 4L-6454 [2] BOLT (3/8-16X1.0IN)  
4. 5P-1075 [1] WASHER-HARD (3MM THK)  
5. 8G-9427 [1] TUBE AS  
6. 7J-9108 [8] SEAL-O-RING (15.72MM ID)  
7. 3W-3114 [1] TUBE AS  
8. 6V-9169 [6] NUT-BULKHEAD (13/16-16 THD)  
9. 6V-9353 C [4] UNION-BULKHEAD  
10. 8T-1809 [1] TEE-UNION  
11. 6V-9352 [1] TEE-BULKHEAD  
  6V-9357 [1] PLUG  
  6V-8555 [1] NUT-FACE SEAL (THICK)  
12. 9M-9162 [3] CLAMP  
13. 6V-8801 [1] NUT (3/8-16 THD)  
14. 8T-4896 [2] WASHER-HARD (2.5MM THK)  
15. 8Y-0357 [1] TUBE AS  
16. 8Y-0358 [1] TUBE AS  
17. 3W-3115 [1] TUBE AS  
18. 6V-9162 [1] CONNECTOR  
19. 3D-2824 [2] SEAL-O-RING (23.47MM ID)  
20. 6V-8637 [1] CONNECTOR-SEAL  
21. 6V-9746 [6] SEAL-O-RING (18.94MM ID)  
22. 8G-5773 [1] TUBE AS  
23. 8G-5774 [1] TUBE AS  
24. 7J-9108 [4] SEAL-O-RING (15.72MM ID)  
25. 8G-5771 [1] TUBE AS  
26. 8G-5772 [1] TUBE AS  
27. 8G-6189 [3] CLAMP  
28. 9S-8752 [3] NUT-FULL (3/8-16 THD)  
29. 8T-4896 [4] WASHER-HARD (2.5MM THK)  
30. 8G-5775 [1] TUBE AS  
31. 6V-8791 [1] TEE-FACE SEAL  
32. 9M-9162 [2] CLAMP  
  4L-6454 [1] BOLT (3/8-16X1.0IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP18880213
 

8G-4485: LINES GP-ANGLE & TILT

8G-4485 LINES GP-ANGLE & TILT
PIN 8ZF1-99999
Type 2
i00421832 SEBP1888
8G4485 LINES GP-ANGLE & TILT Parts scheme 8G4485 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D4HTSK II TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8713 [2] CONNECTOR-SEAL  
  3D-2824 [2] SEAL-O-RING (23.47MM ID)  
2. 3P-5903 [1] CLIP (TAB)  
  3P-5904 [1] CLIP (SLOT)  
3. 4L-6454 [2] BOLT (3/8-16X1.0IN)  
4. 5P-1075 [1] WASHER-HARD (3MM THK)  
5. 9U-8258 C [1] TUBE AS  
6. 7J-9108 C [7] SEAL-O-RING (15.72MM ID)  
7. 3W-3114 [1] TUBE AS  
8. 6V-9169 C [5] NUT-BULKHEAD (13/16-16 THD)  
9. 6V-9353 C [5] UNION-BULKHEAD  
10. 9U-8261 C [1] TEE AS  
11. 3W-3115 [1] TUBE AS  
12. 9M-9162 [3] CLAMP  
13. 6V-8801 [1] NUT (3/8-16 THD)  
14. 8T-4896 [2] WASHER-HARD (2.5MM THK)  
15. 8Y-0357 [1] TUBE AS  
16. 8Y-0358 [1] TUBE AS  
17. 6V-9162 [1] CONNECTOR  
18. 3D-2824 [2] SEAL-O-RING (23.47MM ID)  
19. 6V-8637 [1] CONNECTOR-SEAL  
20. 6V-9746 [6] SEAL-O-RING (18.94MM ID)  
21. 8G-5773 [1] TUBE AS  
22. 9U-8257 C [1] TUBE AS  
23. 7J-9108 [4] SEAL-O-RING (15.72MM ID)  
24. 8G-5771 [1] TUBE AS  
25. 8G-5772 [1] TUBE AS  
26. 8G-6189 [3] CLAMP  
27. 6V-8801 [3] NUT (3/8-16 THD)  
28. 8T-4896 [4] WASHER-HARD (2.5MM THK)  
29. 8G-5775 [1] TUBE AS  
30. 6V-8791 [1] TEE-FACE SEAL  
31. 9M-9162 [2] CLAMP  
  4L-6454 [1] BOLT (3/8-16X1.0IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP18880214
 

9N-4813: LINES GP-GRAPPLE

9N-4813 LINES GP-GRAPPLE
PIN 8ZF1-99999
PART OF 9N-4806, 9N-4872 GRAPPLE AR
Type 1
AN ATTACHMENT
i00437736 SEBP1888
9N4813 LINES GP-GRAPPLE Parts scheme 9N4813 LINES GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your D4HTSK II TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0452 [1] CLIP (SLOT)  
  6V-0453 [1] CLIP (TAB)  
2. 6V-8791 [2] TEE-FACE SEAL  
3. 8E-0013 [1] TUBE AS  
4. 6V-9746 [10] SEAL-O-RING (18.94MM ID)  
5. 8T-2502 [1] BOLT (3/8-16X1.13IN)  
6. 5P-1075 [11] WASHER-HARD (3MM THK)  
7. 5R-0939 [1] CLIP (TAB)  
  5R-0940 [1] CLIP (SLOT)  
8. 3P-5903 [2] CLIP (TAB)  
  3P-5904 [2] CLIP (SLOT)  
9. 5S-7379 [2] BOLT (3/8-16X.875IN)  
10. 8E-0014 [1] TUBE AS  
11. 8E-0015 [1] TUBE AS  
12. 4L-9337 [8] BOLT (3/8-16X1.50IN)  
13. 8E-0019 [1] TUBE AS  
14. 3W-1300 [1] TUBE AS  
15. 3W-1298 [1] TUBE AS  
16. 6V-8942 [1] REDUCER-O-RING  
  6V-8556 [1] NUT (1 3/16-12 THD)  
17. 8E-0020 [1] TUBE AS  
18. 8E-0555 [1] TUBE AS  
  6V-9746 [2] SEAL-O-RING (18.94MM ID)  
19. 5P-1075 [7] WASHER-HARD (3MM THK)  
20. 5R-0939 [8] CLIP (TAB)  
  5R-0940 [8] CLIP (SLOT)  
21. 5S-7379 [4] BOLT (3/8-16X.875IN)  
22. 6V-8633 [2] CONNECTOR  
23. 3D-2824 [6] SEAL-O-RING (23.47MM ID)  
24. 5S-7382 [1] BOLT (3/8-16X1.375IN)  
25. 6V-8801 [1] NUT (3/8-16 THD)  
26. 6V-9162 [2] CONNECTOR  
27. 3W-2569 [4] PLATE  
28. 5P-9299 [4] CLIP (12.7MM ID)  
29. 8T-8915 [1] BOLT (3/8-16X3.25IN)  
30. 8E-0017 [1] TUBE AS  
31. 8E-0016 [1] TUBE AS  
32. 8E-0018 [1] TUBE AS  
33. 6V-8398 [2] SEAL-O-RING (12.47MM ID)  
34. 8E-0021 [1] TUBE AS  
35. 6V-8637 [2] CONNECTOR-SEAL  
36. 7S-3998 [1] SPACER  
37. 6V-8942 [1] REDUCER-O-RING  
  6V-8556 [1] NUT (1 3/16-12 THD)  
38. 5M-3062 [2] BOLT (3/8-16X.750IN)  
39. 8T-4896 [3] WASHER-HARD (2.5MM THK)  
40. 8T-4223 [3] WASHER-HARD (3MM THK)  
41. 8T-4835 [1] BOLT (1/2-13X2IN)  
 

#SEBP18880215
 

9N-4813: LINES GP-GRAPPLE

9N-4813 LINES GP-GRAPPLE
PIN 8ZF1-99999
PART OF 9N-4806, 9N-4872 GRAPPLE AR
Type 2
AN ATTACHMENT
i00437741 SEBP1888
9N4813 LINES GP-GRAPPLE Parts scheme 9N4813 LINES GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your D4HTSK II TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-7175 C [1] CLIP  
2. 6V-8791 [2] TEE-FACE SEAL  
3. 8E-0013 [1] TUBE AS  
4. 6V-9746 [10] SEAL-O-RING (18.94MM ID)  
5. 8T-2502 [1] BOLT (3/8-16X1.125IN)  
6. 5P-1075 C [2] WASHER-HARD (3MM THK)  
7. 5R-0939 [1] CLIP (TAB)  
  5R-0940 [1] CLIP (SLOT)  
8. 3P-5903 [2] CLIP (TAB)  
  3P-5904 [2] CLIP (SLOT)  
9. 5S-7379 C [1] BOLT (3/8-16X.875IN)  
10. 8E-0014 [1] TUBE AS  
11. 8E-0015 [1] TUBE AS  
12. 8E-8042 C [1] TUBE AS  
13. 8E-8043 C [1] TUBE AS  
14. 3W-1300 [1] TUBE AS  
15. 3W-1298 [1] TUBE AS  
16. 6V-8942 [1] REDUCER-O-RING  
  6V-8556 [1] NUT (1 3/16-12 THD)  
17. 8E-8061 C [1] TUBE AS  
  6V-9746 [2] SEAL-O-RING (18.94MM ID)  
18. 5P-1075 [15] WASHER-HARD (3MM THK)  
19. 5R-0939 [8] CLIP (TAB)  
  5R-0940 [8] CLIP (SLOT)  
20. 5S-7379 [4] BOLT (3/8-16X.875IN)  
21. 6V-8633 [2] CONNECTOR  
22. 3D-2824 [6] SEAL-O-RING (23.47MM ID)  
23. 5S-7382 [1] BOLT (3/8-16X34.92)  
24. 6V-8801 [1] NUT (3/8-16 THD)  
25. 6V-9162 [2] CONNECTOR  
26. 3W-2569 [4] PLATE  
27. 5P-9299 [4] CLIP (12.7MM ID)  
28. 8T-8915 [1] BOLT (3/8-16X3.25IN)  
29. 8E-0017 [1] TUBE AS  
30. 8E-0016 [1] TUBE AS  
31. 8E-0018 [1] TUBE AS  
32. 6V-8398 [2] SEAL-O-RING (16.03MM ID)  
33. 8E-0021 [1] TUBE AS  
34. 6V-8637 [2] CONNECTOR-SEAL  
35. 7S-3998 [1] SPACER  
36. 6V-8942 [1] REDUCER-O-RING  
  6V-8556 [1] NUT (1 3/16-12 THD)  
37. 5M-3062 [2] BOLT (3/8-16X.75IN)  
38. 8T-4896 [3] WASHER-HARD (2.5MM THK)  
39. 8T-4223 [3] WASHER-HARD (3MM THK)  
40. 8T-4835 [1] BOLT (1/2X2.0 IN)  
41. 4L-9337 [8] BOLT (3/8-16X1.5IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP18880216
 

9N-4825: LINES GP-GRAPPLE

9N-4825 LINES GP-GRAPPLE
PIN 8ZF1-99999
PART OF 9N-4806, 9N-4872 GRAPPLE AR
AN ATTACHMENT
i00437814 SEBP1888
9N4825 LINES GP-GRAPPLE Parts scheme 9N4825 LINES GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your D4HTSK II TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-2566 [4] BOLT (1/2-13X1.50IN)  
  8T-4223 [4] WASHER-HARD (3MM THK)  
2. 2J-7731 [4] CLAMP-HOSE  
3. 4L-6454 [11] BOLT (3/8-16X1.0IN)  
4. 5P-1075 [19] WASHER-HARD (3MM THK)  
5. 6Y-9543 [1] PLATE AS  
  2J-7730 [2] CLAMP-HOSE  
6. 8T-5082 [2] UNION  
  6V-9746 [2] SEAL-O-RING (18.94MM ID)  
7. 3G-8054 [2] CLIP (TAB)  
  3G-8057 [2] CLIP (SLOT)  
  3G-8047 [2] GROMMET  
8. 6V-8801 [4] NUT (3/8-16 THD)  
9. 6Y-9551 I [1] HOSE AS  
10. 6V-8398 [6] SEAL-O-RING (12.47MM ID)  
11. 6Y-9552 I [1] HOSE AS  
12. 6D-9392 [4] CLAMP  
13. 8T-4896 [2] WASHER-HARD (2.5MM THK)  
14. 7S-3912 [3] CLIP (TAB)  
  7S-3913 [3] CLIP (SLOT)  
15. 5S-7379 [6] BOLT (3/8-16X.875IN)  
16. 6V-8731 [2] UNION-FACE SEAL  
17. 8E-8109 I [2] HOSE AS  
18. 6V-0683 [2] GROMMET  
19. 8F-4028 [1] SPACER  
20. 6V-8730 [2] UNION-FACE SEAL  
21. 8E-8108 I [2] HOSE AS  
22. 6V-8397 [2] SEAL-O-RING (9.27MM ID)  
23. 5R-0939 [3] CLIP (TAB)  
  5R-0940 [3] CLIP (SLOT)  
24. 6V-8633 [2] CONNECTOR  
  3D-2824 [2] SEAL-O-RING (23.47MM ID)  
25. 6Y-9550 I [2] HOSE AS  
26. 6V-8398 [8] SEAL-O-RING (12.47MM ID)  
27. 7X-0290 [4] BOLT (3/8-16X3.50IN)  
28. 5P-1075 [14] WASHER-HARD (3MM THK)  
29. 6Y-9545 [1] BRACKET AS  
30. 9B-7237 [8] BOLT (3/8-16X1.25IN)  
31. 8T-2501 [4] BOLT (3/8-16X2IN)  
32. 8T-4896 [8] WASHER-HARD (2.5MM THK)  
33. 8T-2502 [4] BOLT (3/8-16X1.13IN)  
34. 4J-0519 [2] SEAL-O-RING (31.34MM ID)  
35. 6Y-9556 I [1] HOSE AS  
36. 6Y-9557 [1] TUBE AS  
37. 6Y-9558 [1] TUBE AS  
38. 3G-8054 [2] CLIP (TAB)  
  3G-8057 [2] CLIP (SLOT)  
  3G-8047 [2] GROMMET  
39. 6Y-9549 I [1] HOSE AS  
40. 6Y-9547 [1] BRACKET AS  
41. 6Y-9553 I [2] HOSE AS  
  6V-8397 [4] SEAL-O-RING (9.27MM ID)  
42. 5S-7379 [4] BOLT (3/8-16X.875IN)  
43. 7S-3912 [2] CLIP (TAB)  
  7S-3913 [2] CLIP (SLOT)  
44. 5R-0939 [2] CLIP (TAB)  
  5R-0940 [2] CLIP (SLOT)  
45. 6V-8801 [2] NUT (3/8-16 THD)  
46. 6Y-9542 [2] CLAMP  
47. 6Y-9540 [2] BRACKET AS  
  I   SEE HOSE FABRICATION GUIDE
 

#SEBP18880217
 

8G-4484: LINES GP-LIFT CYLINDER

8G-4484 LINES GP-LIFT CYLINDER
PIN 8ZF1-99999
i00421818 SEBP1888
8G4484 LINES GP-LIFT CYLINDER Parts scheme 8G4484 LINES GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your D4HTSK II TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-9162 [1] CONNECTOR  
2. 3D-2824 [2] SEAL-O-RING (23.47MM ID)  
3. 8G-5933 [1] TUBE AS  
4. 6V-9746 [4] SEAL-O-RING (18.94MM ID)  
5. 6V-9169 [2] NUT-BULKHEAD (13/16-16 THD)  
6. 6V-8637 [1] CONNECTOR-SEAL  
7. 8G-5932 [1] TUBE AS  
8. 8T-1809 [2] TEE-UNION  
9. 4L-6454 [4] BOLT (3/8-16X1.0IN)  
  5P-1075 [4] WASHER-HARD (3MM THK)  
10. 8G-6195 [1] BRACKET AS  
11. 3P-5903 [2] CLIP (TAB)  
  3P-5904 [2] CLIP (SLOT)  
12. 6V-9169 [2] NUT-BULKHEAD (13/16-16 THD)  
13. 8T-1810 [2] ELBOW-90 DEGREE  
14. 6V-9852 [2] ELBOW-SWIVEL  
15. 7J-9108 [8] SEAL-O-RING (15.72MM ID)  
16. 8G-9516 [1] TUBE AS  
17. 8G-9476 [1] TUBE AS  
18. 8G-6192 I [4] HOSE AS  
  6V-8398 [8] SEAL-O-RING (12.47MM ID)  
19. 8G-6091 [2] TUBE AS  
20. 6V-8633 [2] CONNECTOR  
21. 3D-2824 [4] SEAL-O-RING (23.47MM ID)  
22. 6V-8713 [2] CONNECTOR-SEAL  
23. 4L-6454 [4] BOLT (3/8-16X1.0IN)  
  5P-1075 [4] WASHER-HARD (3MM THK)  
24. 6K-4939 [4] CLIP  
  6K-4938 [4] CLIP  
  I   SEE HOSE FABRICATION GUIDE
 

#SEBP18880218
 

6Y-7232: LINES GP-OIL

6Y-7232 LINES GP-OIL
S/N 7BG1-99999
WINCH
PART OF 8E-0304 WINCH AR-TOWING
AN ATTACHMENT
i00394875 SEBP1888
6Y7232 LINES GP-OIL Parts scheme
  For full view, you need register

Parts for your D4HTSK II TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-4439 [1] ADAPTER-ORIFICE  
2. 5K-9239 [1] CONNECTOR  
3. 6Y-4570 [1] TUBE AS  
4. 5K-9238 [4] CONNECTOR-FLARED  
5. 6K-8214 [1] TEE-FLARED  
6. 6L-3616 [3] CONNECTOR-FLARED  
7. 6T-4099 [1] TUBE AS  
8. 9G-0796 [1] TUBE AS  
9. 2J-0157 [2] SEAL-O-RING (15.47MM ID)  
10. 7T-7822 [1] TUBE  
11. 7T-7819 [1] TUBE  
12. 7T-7820 [1] TUBE  
13. 7T-7821 [1] TUBE  
14. 7T-7823 [1] TUBE  
15. 4H-1966 [10] CONNECTOR  
16. 2S-4958 [1] SLEEVE  
17. 8M-4435 [2] SEAL (18.64MM ID)  
18. 9L-9045 [1] TEE  
19. 6V-0367 [1] ADAPTER  
20. 9G-0798 [1] TUBE AS  
21. 6Y-4740 [1] TUBE AS  
22. 5K-9244 [1] ELBOW-FLARED  
23. 0S-1613 [1] BOLT  
  1A-5350 [1] CLIP (6.35MM ID)  
  5P-0537 [1] WASHER (2MM THK)  
24. 9W-3305 [1] TUBE AS  
25. 6Y-5424 [1] VALVE AS  
26. 030-7764 [1] NIPPLE  
27. 5K-9243 [1] ELBOW-FLARED  
28. 6T-5994 [1] TUBE AS  
 

#SEBP18880219
 

9N-4822: LINES GP-PUMP

9N-4822 LINES GP-PUMP
PIN 8ZF1-99999
i00554999 SEBP1888
9N4822 LINES GP-PUMP Parts scheme 9N4822 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your D4HTSK II TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-2424 [2] BOLT (1/2-13X2.25IN)  
  8T-4223 [2] WASHER-HARD (3MM THK)  
2. 7M-8485 [4] SEAL-O-RING (29.74MM ID)  
3. 2M-9780 [1] SEAL-O-RING (19.18MM ID)  
4. 6V-8638 [1] CONNECTOR-SEAL  
5. 6V-8398 [1] SEAL-O-RING (12.47MM ID)  
6. 6V-8716 [3] CONNECTOR-SEAL  
7. 6V-9746 [4] SEAL-O-RING (18.94MM ID)  
8. 8Y-0607 I [1] HOSE AS  
9. 4L-6454 [2] BOLT (3/8-16X1.0IN)  
10. 5P-1075 [12] WASHER-HARD (3MM THK)  
11. 7K-1401 [1] CLIP (CURVE)  
12. 7K-1402 [1] BRACKET (STRAIGHT)  
13. 5S-7382 [4] BOLT (3/8-16X1.375IN)  
14. 6V-8801 [5] NUT (3/8-16 THD)  
15. 1S-1015 [2] CLIP (20.46MM ID)  
16. 5P-7462 [1] CLIP (SLOT)  
  5P-7463 [1] CLIP (TAB)  
17. 6V-0683 [1] GROMMET  
18. 3W-6687 [1] BRACKET AS  
  9F-2978 [1] NUT-WELD (3/8-16 THD)  
19. 6V-5185 [1] CLIP (SLOT)  
  6V-5186 [3] CLIP (TAB)  
20. 8G-6149 I [1] HOSE AS  
21. 3W-6689 [2] BRACKET AS  
    (EACH INCLUDES)
  5J-0096 [1] STUD-WELD  
22. 5C-6565 [1] BOLT (1/2-13X1.25IN)  
  7X-0550 [1] WASHER-HARD  
23. 8G-6604 [1] TUBE AS  
24. 8T-1681 [1] NUT-FACE SEAL  
25. 8E-0143 I [1] HOSE AS  
26. 3J-7354 [1] SEAL-O-RING (8.92MM ID)  
  6V-9200 [1] ELBOW-FACE SEAL  
27. 6V-9182 [1] ELBOW-FACE SEAL  
28. 5R-0939 [1] CLIP (TAB)  
  5R-0940 [1] CLIP (SLOT)  
29. 3W-6719 [1] ROD  
30. 8T-0315 [1] SEAL (37.82MM ID)  
31. 6V-9850 [1] ELBOW-SWIVEL (11/16-16 THD)  
32. 6V-8397 [6] SEAL-O-RING (9.27MM ID)  
33. 5G-9733 [1] TUBE AS  
34. 6V-9836 [1] TEE (SWIVEL)  
35. 8T-4896 [1] WASHER-HARD (2.5MM THK)  
36. 1P-3705 [1] SEAL-RECTANGULAR (44.7MM ID)  
37. 8G-6121 [1] TUBE AS  
38. 6V-9200 [1] ELBOW-FACE SEAL  
  6V-8397 [1] SEAL-O-RING (9.27MM ID)  
39. 3J-7354 [1] SEAL-O-RING (8.92MM ID)  
40. 6V-9853 [1] ELBOW-SWIVEL  
  6V-9746 [1] SEAL-O-RING (18.94MM ID)  
41. 8E-0144 I [1] HOSE AS  
42. 1S-1015 [5] CLIP (20.46MM ID)  
43. 5M-3062 [1] BOLT (3/8-16X.750IN)  
44. 5P-1075 [7] WASHER-HARD (3MM THK)  
45. 8T-2502 [3] BOLT (3/8-16X1.13IN)  
46. 6V-8801 [3] NUT (3/8-16 THD)  
47. 7K-1401 [2] CLIP (CURVE)  
  7K-1402 [2] BRACKET (STRAIGHT)  
48. 5P-0597 [4] CLAMP  
49. 6V-2432 E HOSE (39 CM)  
50. 5P-7466 [1] CLIP (SLOT)  
  5P-7467 [1] CLIP (TAB)  
  5P-8112 [1] GROMMET  
51. 134-5645 [1] CLIP-LOOP  
52. 6V-8721 [1] ELBOW-90 DEGREE (7/8-14 THD)  
  2M-9780 [1] SEAL-O-RING (19.18MM ID)  
  6V-8398 [1] SEAL-O-RING (12.47MM ID)  
53. 9S-1310 [2] CLIP (9.5MM ID)  
54. 6V-9508 [1] PLUG-FACE SEAL  
  E   ORDER BY THE CENTIMETER
  I   SEE HOSE FABRICATION GUIDE
 

Information:

Caterpillar Parts SIS Catalog D4HTSK II :

HYDRAULIC GP-GRAPPLE
8C-9416 HYDRAULIC GP-GRAPPLE
CYLINDER GP-TILT
9T-9557 CYLINDER GP-TILT
CYLINDER GP-LIFT
6E-0365 CYLINDER GP-LIFT
CYLINDER GP-GRAPPLE
8C-9429 CYLINDER GP-GRAPPLE
CYLINDER GP-GRAPPLE
8C-9412 CYLINDER GP-GRAPPLE
CYLINDER GP-ARCH LIFT
6E-0366 CYLINDER GP-ARCH LIFT
CYLINDER GP-ANGLING
100-6174 CYLINDER GP-ANGLING
CYLINDER GP-ANGLING
9T-9247 CYLINDER GP-ANGLING
LINES GP-ANGLE & TILT
1U-2387 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
8G-4485 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
8G-4485 LINES GP-ANGLE & TILT
LINES GP-GRAPPLE
9N-4813 LINES GP-GRAPPLE
LINES GP-GRAPPLE
9N-4813 LINES GP-GRAPPLE
LINES GP-GRAPPLE
9N-4825 LINES GP-GRAPPLE
LINES GP-LIFT CYLINDER
8G-4484 LINES GP-LIFT CYLINDER
LINES GP-OIL
6Y-7232 LINES GP-OIL

Truck sale:

1989 CAT D4H TSK II
USD $49,500 
1989 CAT D4H TSK II

Clark Heavy Equipment
Pleasureville, Kentucky
1989 CAT D4H TSK II
USD $49,500 
1989 CAT D4H TSK II

Clark Heavy Equipment
Pleasureville, Kentucky
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.