AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8G-7711 LINES GP-TILT CYLINDER S/N 7EG1-1008 D5HTSK II TRACK SKIDDER


HYDRAULIC SYSTEM
LINES GP-CYLINDER
MOTOR GP
MOUNTING GP
PIN GP
PUMP GP

TRACK SKIDDER D5HTSK II TRACK SKIDDER 7EG
 D5H Track-Type Skidder Series II 7EG00001-UP (MACHINE) POWERED BY 3304 Engine SEBP1889 D5HTSK II 7EG   (1989)

HYDRAULIC SYSTEM

LINES GP-CYLINDER
LINES GP-ANGLE & TILT
6Y-6077 LINES GP-ANGLE & TILT
LINES GP-ANGLING CYLINDER
8G-4441 LINES GP-ANGLING CYLINDER
LINES GP-LIFT CYLINDER
8G-4442 LINES GP-LIFT CYLINDER
LINES GP-TILT CYLINDER
8G-7711 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
8G-7711 LINES GP-TILT CYLINDER
 

#SEBP18890330
 

8G-7711: LINES GP-TILT CYLINDER

8G-7711 LINES GP-TILT CYLINDER
S/N 7EG1-1008
i00423102 SEBP1889
8G7711 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D5HTSK II TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8713 [2] CONNECTOR  
2. 3W-3886 [1] TUBE AS  
3. 3W-3885 [1] TUBE AS  
4. 3W-3223 [1] TUBE AS  
5. 3W-3204 [1] TUBE AS  
6. 3W-3222 [1] TUBE AS  
7. 8T-1810 [2] ELBOW  
8. 6V-9169 [2] NUT (13/16-16-THD)  
9. 3D-2824 [2] SEAL-O-RING  
10. 7J-9108 [7] SEAL-O-RING  
11. 4S-8002 [2] CLAMP  
12. 5S-7379 [1] BOLT (3/8-16X0.875-IN)  
13. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

#SEBP18890331
 

8G-7711: LINES GP-TILT CYLINDER

8G-7711 LINES GP-TILT CYLINDER
S/N 7EG1009-UP
i00423107 SEBP1889
8G7711 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D5HTSK II TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8637 C [1] CONNECTOR  
2. 8E-3869 C [1] TUBE AS  
3. 8E-3868 C [1] TUBE AS  
4. 3W-3223 [1] TUBE AS  
5. 3W-3204 [1] TUBE AS  
6. 3W-3222 [1] TUBE AS  
7. 8T-1810 [2] ELBOW  
8. 6V-9169 [2] NUT (13/16-16-THD)  
9. 3D-2824 [2] SEAL-O-RING  
10. 7J-9108 C [5] SEAL-O-RING  
11. 4S-8002 [2] CLAMP  
12. 9B-7237 C [1] BOLT (3/8-16X1.25-IN)  
13. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
14. 6V-9162 C [1] CONNECTOR  
15. 6V-9746 C [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP18890332
 

8C-9401: MOTOR GP-GEROTOR

8C-9401 MOTOR GP-GEROTOR -GRAPPLE ROTATION
S/N 1WG1-UP; 3NG1-UP; 7EG1-UP
HSG 82 & 100 INCH ICE TONG
PART OF 103-0257, 103-0971, 8C-9416, 8C-9430 HYDRAULIC GP-GRAPPLE
AN ATTACHMENT
i00170299 SEBP1889
8C9401 MOTOR GP-GEROTOR Parts scheme
  For full view, you need register

Parts for your D5HTSK II TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-9439 [4] BOLT  
2. JZ [1] SEAL  
3. 8C-9441 [1] FLANGE-MOUNTING  
4. JZ [1] SEAL  
5. JZ [1] SEAL  
6. 8C-9444 [1] RACE-BEARING  
7. 8C-9445 [1] BEARING  
8. 8C-9446 [1] KEY  
9. 8C-9447 [1] SHAFT  
10. JZ [1] SEAL  
11. 9N-8121 [1] BOLT  
12. 8C-9448 [1] HOUSING  
13. JZ [3] SEAL  
14. 8C-9450 [1] DRIVE  
15. 8C-9451 [1] PLATE-SPACER  
16. 8C-9452 [1] GEROTOR SET  
17. 8C-9453 [1] SPACER  
18. 8C-9454 [1] CAP  
19. JZ [7] WASHER  
20. 8C-9456 [7] SCREW  
   
    AVAILABLE REPAIR KIT(S):
  8C-9457 J [1] KIT-SEAL  
  J   (KIT MARKED J SERICES PARTS MARKED J)
  Z   NOT SERVICED SEPARATELY
 

#SEBP18890333
 

8G-4478: MOUNTING GP-VALVE

8G-4478 MOUNTING GP-VALVE
S/N 7EG1-UP
i00421749 SEBP1889
8G4478 MOUNTING GP-VALVE Parts scheme
  For full view, you need register

Parts for your D5HTSK II TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-1474 [1] PLATE AS  
  3T-6090 [1] BOSS  
2. 9F-2978 [26] NUT-WELD (3/8-16 THD)  
3. 8T-2502 [4] BOLT (3/8-16X1.13IN)  
  5P-1075 [4] WASHER-HARD (3MM THK)  
4. 4L-9337 [3] BOLT (3/8-16X1.50IN)  
  8T-4896 [3] WASHER-HARD (2.5MM THK)  
 

#SEBP18890334
 

9N-4829: MOUNTING GP-VALVE

9N-4829 MOUNTING GP-VALVE
S/N 7EG1-UP
PART OF 6I-8950, 9N-4906, 9N-4907, 9U-8330 GRAPPLE AR
AN ATTACHMENT
i00437851 SEBP1889
9N4829 MOUNTING GP-VALVE Parts scheme
  For full view, you need register

Parts for your D5HTSK II TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-0087 [1] PLATE AS  
2. 9F-2978 [17] NUT-WELD (3/8-16 THD)  
3. 5G-1014 [1] BOSS  
4. 4L-9337 [3] BOLT (3/8-16X1.50IN)  
5. 8T-4896 [3] WASHER-HARD (2.5MM THK)  
6. 8T-2502 [4] BOLT (3/8-16X1.13IN)  
7. 5P-1075 [4] WASHER-HARD (3MM THK)  
 

#SEBP18890335
 

6Y-8115: PIN GP-CYLINDER

6Y-8115 PIN GP-CYLINDER
S/N 4ZH1-99999; 7DH1-UP
PART OF 9N-4904 BULLDOZER AR-ANGLING, 9U-8236 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00395282 SEBP1889
6Y8115 PIN GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your D5HTSK II TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-8900 [2] PIN  
2. 4T-0231 [2] RETAINER  
3. 8C-4436 [2] BOLT (1/2-13X1.375-IN)  
  8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 4J-0805 [6] WASHER (1.781X2.5X0.12-IN THK)  
 

#SEBP18890336
 

7G-5719: PUMP GP-GEAR

7G-5719 PUMP GP-GEAR
S/N 7EG1-UP
1 SECTION
PART OF 7G-5720 PUMP GP-GEAR
AN ATTACHMENT
i00399020 SEBP1889
7G5719 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your D5HTSK II TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9G-2807 [1] BODY AS-OIL PUMP  
2. 8M-8489 [2] DOWEL (12.54MM DIA)  
3. 2S-7931 [2] BEARING  
4. 2P-3537 [1] COVER AS-OIL PUMP  
5. 8M-8489 [2] DOWEL (12.54MM DIA)  
6. 2S-7931 [2] BEARING  
7. 7S-3029 [1] SEAL-LIP  
8. 5P-0076 [4] BOLT-12 POINT HEAD (3/8-16X1.50IN)  
  3V-2431 [4] WASHER (2.0MM THK)  
9. 4M-0189 [1] SEAL-O-RING (104.37MM ID)  
10. 9G-2805 [1] GEAR AS-PUMP (8 TEETH)  
11. 7G-5710 [1] GEAR AS-PUMP (8 TEETH)  
 

#SEBP18890337
 

7G-5720: PUMP GP-GEAR

7G-5720 PUMP GP-GEAR
S/N 7EG1-UP
1 SECTION
PART OF 7T-9867 INSTALLATION AR-WINCH
AN ATTACHMENT
i00399029 SEBP1889
7G5720 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your D5HTSK II TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7G-5719 Y [1] PUMP GP-GEAR  
2. 0L-2070 [2] BOLT (3/8-16X2.25IN)  
3. 8T-7192 [1] SEAL-FACE  
4. 5M-2894 [2] WASHER (2.5MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP18890338
 

6E-5052: PUMP GP-PISTON

6E-5052 PUMP GP-PISTON
S/N 7EG1000-UP
SLIPPER
i00401147 SEBP1889
6E5052 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your D5HTSK II TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-6572 [1] SHAFT  
2. 6E-6573 [1] BEARING  
3. 6E-4224 [1] PLUG-SWASHPLATE  
4. 033-6036 [1] SEAL-O-RING  
5. 6E-6574 [1] HEAD  
6. 9T-1699 [1] SPRING  
7. 9T-1710 [1] POPPET  
8. 9T-1636 [1] SEAT  
9. 6E-6575 [1] COVER  
10. 6V-8837 M [3] BOLT (M6X1X16-MM)  
11. 1P-8362 [1] SEAL-O-RING  
12. 6E-6576 [1] BEARING  
13. 3E-4302 M [2] SCREW-FLAT HEAD (M4X0.7X10-MM)  
14. 6E-2943 [1] PLUG  
15. 095-0888 [2] PIN-SPRING  
16. 9T-3038 B [1] SHIM PACK  
17. 6V-5684 M [4] BOLT (M12X1.75X45-MM)  
18. 9S-4185 [1] PLUG  
19. 3K-0360 [1] SEAL-O-RING  
20. 6E-6568 Y [1] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)  
21. 6V-8336 M [1] BOLT (M12X1.75X70-MM)  
22. 8T-5039 [3] SEAL-O-RING  
23. 6V-8337 M [4] BOLT-SOCKET HEAD (M8X1.25X35-MM)  
24. 6E-6577 [1] HOUSING  
25. 005-0469 [1] CUP-BEARING  
26. 6E-6578 [1] KIT-PISTON BIAS  
    (INCLUDES SPRING, ROD, PISTON & SEAL)
27. 6E-6579 [1] SPRING-BIAS  
28. 6E-6569 Y [1] ROTATING GP-PUMP  
29. 6E-6580 [1] GASKET  
30. 6V-3922 [2] SEAL-O-RING  
31. 3E-7417 [4] PLUG  
32. 8T-7876 [4] SEAL-O-RING  
33. 9T-3030 [1] PLATE  
34. 111-6800 [1] CONE-BEARING  
35. 111-6801 [1] CUP-BEARING  
36. 8T-0372 M [1] BOLT (M12X1.75X90-MM)  
37. 6E-6581 [1] SPACER  
38. 9T-1652 [1] PIN  
39. 6E-6582 [1] KIT-PISTON CONTROL  
    (INCLUDES ROD, PISTON & SEAL)
40. 6E-6583 [1] SWASHPLATE GP  
  8F-7219 [2] SEAL-O-RING  
  139-0532 [2] BLOCK-STOP  
41. 008-3214 [2] RING-RETAINING (INTERNAL)  
42. 3E-6776 [2] SEAL-LIP TYPE  
43. 005-0471 [1] CONE-BEARING  
44. 5F-3106 A [1] SEAL-O-RING  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP18890339
 

9T-3029: PUMP GP-PISTON

9T-3029 PUMP GP-PISTON
S/N 7EG1-999
i00433220 SEBP1889
9T3029 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your D5HTSK II TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-6757 Y [1] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)  
2. 9S-4182 [3] PLUG  
3. 3J-7354 [3] SEAL-O-RING  
4. 6V-8150 M [2] BOLT (M12X1.75X60-MM)  
5. 064-9829 [1] PLUG  
6. 1J-9671 [1] SEAL-O-RING  
7. 9T-3031 [1] HEAD  
8. 9T-1699 [1] SPRING  
9. 9T-1710 [1] POPPET  
10. 9T-1636 [1] SEAT  
11. 8T-4812 [2] BUSHING-TERMINAL  
12. 9T-1652 [1] PIN  
13. 6V-5696 M [6] BOLT (M12X1.75X80-MM)  
14. 5A-3604 M [4] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
15. 9W-2110 [1] CUP-TAPERED ROLLER  
16. 9W-2109 [1] CONE-BEARING  
17. 9T-3038 B [1] SHIM PACK  
18. 9T-3030 [1] PLATE  
19. 9T-3017 [1] ROTATING GP-PUMP  
  9T-3026 [1] BARREL  
20. 002-3455 [1] RING-RETAINING  
21. 9T-3021 [1] GUIDE  
22. 9T-3023 [1] SPRING  
23. 9T-3025 [1] GUIDE  
24. 9T-3024 [1] SPACER  
25. 9T-3019 [1] PLATE  
26. 9T-3020 [1] PLATE  
27. 9T-3018 [9] PISTON AS  
28. 9T-3022 [1] KEY  
29. 9T-6755 [1] SHAFT  
30. 1M-8735 [1] CONE-BEARING  
31. 1M-8736 [1] CUP-BEARING  
32. 1A-2036 [1] DOWEL  
33. 9T-3027 [1] SWASHPLATE  
34. 9T-3033 [2] STOP  
35. 9T-6762 [1] SPACER  
36. 9T-3016 [1] KIT-PISTON CONTROL  
37. 2M-9780 [2] SEAL-O-RING  
38. 9T-3014 [1] KIT-BIAS PISTON  
39. 9T-3015 [1] SPRING  
40. 008-3214 [1] RING-RETAINING (INTERNAL)  
41. 9T-3035 [1] GASKET  
42. 9T-6756 [1] HOUSING  
43. 6V-5217 M [8] BOLT (M8X1.25X20-MM)  
44. 9T-1712 [2] COVER  
45. 5P-3863 [2] SEAL-O-RING  
46. 9T-3036 [2] SPACER  
47. 9S-3581 [2] CUP-BEARING  
48. 9S-3582 [2] CONE-BEARING  
49. 9T-2216 B [1] SHIM PACK  
50. 8T-6785 [2] SEAL  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog D5HTSK II :

LINES GP-PUMP
9N-4922 LINES GP-PUMP
LINES GP-PUMP
6I-8953 LINES GP-PUMP
LINES GP-LIFT CYLINDER
8G-4442 LINES GP-LIFT CYLINDER
LINES GP-GRAPPLE
9N-4926 LINES GP-GRAPPLE
LINES GP-GRAPPLE
9N-4926 LINES GP-GRAPPLE
LINES GP-GRAPPLE
9N-4924 LINES GP-GRAPPLE
LINES GP-GRAPPLE
9N-4924 LINES GP-GRAPPLE
LINES GP-ANGLING CYLINDER
8G-4441 LINES GP-ANGLING CYLINDER
LINES GP-TILT CYLINDER
8G-7711 LINES GP-TILT CYLINDER
MOTOR GP-GEROTOR
8C-9401 MOTOR GP-GEROTOR
MOUNTING GP-VALVE
8G-4478 MOUNTING GP-VALVE
MOUNTING GP-VALVE
9N-4829 MOUNTING GP-VALVE
PIN GP-CYLINDER
6Y-8115 PIN GP-CYLINDER
PUMP GP-GEAR
7G-5719 PUMP GP-GEAR
PUMP GP-GEAR
7G-5720 PUMP GP-GEAR
PUMP GP-PISTON
6E-5052 PUMP GP-PISTON

Truck sale:

 
Call 
1996 CAT D5H TSK II

CROWLEY EQUIPMENT INC
Eugene, Oregon
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.