HYDRAULIC SYSTEM
VALVE GP-SELECTOR & PRESS CONTIMPLEMENTS
BULLDOZER GPC-FRAME GP
LINKAGE GP
HYDRAULIC SYSTEM
VALVE GP-SELECTOR & PRESS CONT
#SEBP18890370
3T-9924: VALVE GP-SELECTOR & PRESS CONT
3T-9924 VALVE GP-SELECTOR & PRESS CONT
S/N 2EJ1-UP
PART OF 3T-9923 CONTROL GP-WINCH
AN ATTACHMENT
S/N 2EJ1-UP
PART OF 3T-9923 CONTROL GP-WINCH
AN ATTACHMENT
For full view, you need register
Parts for your D5HTSK II TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1F-4111 C | [6] | BOLT (5/16-18X3.5-IN) | |
| 2. | 5M-6214 | [6] | PLUG-PIPE | |
| 3. | 3T-9927 Y | [1] | VALVE GP-SELECTOR & PRESS CONT | |
| 4. | 3T-9932 | [1] | PLATE AS | |
| 4N-5629 | [2] | BUSHING | ||
| 9F-2247 | [2] | PLUG-PIPE | ||
| 5. | 3T-9926 Y | [1] | VALVE GP-PRESSURE CONTROL | |
| 6. | 9W-0276 | [1] | SCREEN | |
| 7. | 5H-8853 | [1] | SEAL-O-RING | |
| 8. | 8B-4884 | [1] | ELBOW (90-DEG) | |
| 9. | 3B-7263 | [1] | NIPPLE-PIPE | |
| 10. | 4B-0831 C | [1] | BOLT (5/16-18X3.75-IN) | |
| 9M-1974 C | [2] | WASHER-HARD (8.8X16X2-MM THK) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP18890371
3T-9927: VALVE GP-SELECTOR & PRESS CONT
3T-9927 VALVE GP-SELECTOR & PRESS CONT
S/N 2EJ1-UP
PART OF 3T-9924 VALVE GP-SELECTOR & PRESS CONT
AN ATTACHMENT
S/N 2EJ1-UP
PART OF 3T-9924 VALVE GP-SELECTOR & PRESS CONT
AN ATTACHMENT
For full view, you need register
Parts for your D5HTSK II TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1A-8312 | [1] | SPRING-VALVE | |
| 2. | 3T-9939 | [1] | SPOOL | |
| 3. | 3T-9945 | [1] | GUIDE AS | |
| 4. | 3T-9951 | [1] | PISTON-LOAD | |
| 5. | 8M-4431 | [1] | SEAL (26.64MM ID) | |
| 6. | 7T-7764 | [1] | COVER | |
| 7. | 3T-9952 | [1] | PLUNGER | |
| 8. | 2B-2695 | [2] | BOLT (5/16-18X.875 IN) | |
| 9. | 3T-9949 | [1] | SPOOL | |
| 10. | 3T-9937 | [1] | SPOOL-SELECTOR | |
| 11. | 5S-9606 | [1] | SPRING | |
| 12. | 9W-4023 | [2] | RETAINER | |
| 13. | 8J-4552 | [1] | SPRING | |
| 14. | 1D-4539 | [2] | BOLT (5/16-18X2.5IN) | |
| 15. | 0S-1617 | [2] | BOLT (5/16-18X.75IN) | |
| 16. | 1T-0738 | [1] | WASHER (1.83MM THK) | |
| 17. | 6B-0830 | [1] | COVER | |
| 18. | 3T-9953 | [1] | SLUG-VALVE | |
| 19. | 9W-4251 | [1] | SPOOL | |
| 20. | 3G-3916 | [1] | RING-RETAINING |
#SEBP18890372
4T-5348: BRACE GP-BULLDOZER
For full view, you need register
Parts for your D5HTSK II TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6F-3183 | [2] | CAP-BEARING | |
| 2. | 7X-0368 | [4] | BOLT (3/4-10X3-IN) | |
| 3. | 1U-1176 | [2] | PIN (LARGE) | |
| 4F-0255 | [2] | PIN (SMALL) | ||
| 3B-4627 | [2] | PIN-COTTER | ||
| 4. | 1U-0929 | [2] | SCREW-ADJUSTMENT | |
| 5. | 1U-1267 | [2] | BRACE AS | |
| (EACH INCLUDES) | ||||
| 6F-3908 | [1] | HANDLE | ||
| 8J-4866 | [1] | LUG | ||
| 3F-4854 | [1] | KNOB | ||
| 6. | 3B-8489 | [4] | FITTING-GREASE | |
| 7. | 1U-0928 | [2] | SCREW-ADJUSTMENT | |
| 8. | 3J-6559 | [4] | CAP-BEARING | |
| 9. | 7X-0370 | [16] | BOLT (3/4-10X3.5-IN) | |
| 10. | 3J-6573 | [2] | SCREW-ADJUSTMENT | |
| 11. | 3J-6572 B | [72] | SHIM (0.5-MM THK) | |
| 12. | 4F-1252 | [2] | PIN | |
| 13. | 3J-1770 | [2] | LOCK PIN | |
| 14. | 4T-5495 | [2] | STUD-BALL | |
| 15. | 7T-4970 | [1] | ARM AS | |
| 7T-9146 | [1] | ARM AS | ||
| (EA ARM AS INCL) | ||||
| 1U-1174 | [1] | BRACKET (LH) | ||
| 1U-1173 | [1] | BRACKET (RH) | ||
| 1U-1175 | [2] | PLATE | ||
| 4B-4098 | [1] | PLUG-CUP | ||
| 1U-1263 J | [1] | BEARING | ||
| 9J-9147 J | [1] | NUT (2-3/4-8-THD) | ||
| 9W-0588 L | [1] | BEARING | ||
| 3Y-3866 L | [1] | NUT (2-3/4-8-THD) | ||
| B | USE AS REQUIRED | |||
| J | USE WITH 2-CHANNEL ARM AS | |||
| L | USE WITH 4-PLATE ARM AS | |||
#SEBP18890373
4T-5348: BRACE GP-BULLDOZER
For full view, you need register
Parts for your D5HTSK II TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-5495 | [2] | STUD-BALL | |
| 2. | 3B-8489 | [4] | FITTING-GREASE | |
| 3. | 1U-0928 | [2] | SCREW-ADJUSTMENT | |
| 4. | 7X-0370 | [16] | BOLT (3/4-10X3.5-IN) | |
| 5. | 3J-6559 | [4] | CAP-BEARING | |
| 6. | 8E-9212 CB | [104] | SHIM (0.8-MM THK) | |
| 7. | 3J-1770 | [2] | LOCK PIN | |
| 8. | 4F-1252 | [2] | PIN | |
| 9. | 160-6306 | [2] | CAP-BEARING | |
| 10. | 7X-0368 | [4] | BOLT (3/4-10X3-IN) | |
| 11. | 8E-5701 CB | [52] | SHIM (0.8-MM THK) | |
| 12. | 1U-0929 | [2] | SCREW-ADJUSTMENT | |
| 13. | 3J-6573 | [2] | SCREW-ADJUSTMENT | |
| 14. | 1U-1176 | [2] | PIN | |
| 15. | 4F-0255 | [2] | PIN | |
| 16. | 3B-4627 | [2] | PIN-COTTER | |
| 17. | 1U-1267 | [2] | BRACE AS | |
| (EACH INCLUDES) | ||||
| 18. | 8J-4866 | [1] | LUG | |
| 19. | 6F-3908 | [1] | HANDLE | |
| 20. | 3F-4854 | [1] | KNOB | |
| 21. | 7T-4970 | [1] | ARM AS | |
| 22. | 7T-9146 | [1] | ARM AS | |
| (EACH ARM AS INCLUDES) | ||||
| 4B-4098 | [1] | PLUG-CUP | ||
| 23. | 1U-1174 | [1] | BRACKET (LH) | |
| 1U-1173 | [1] | BRACKET (RH) | ||
| 24. | 1U-1175 | [2] | PLATE | |
| 25. | 3Y-3866 | [1] | NUT (2-3/4-8-THD)(FOR USE WITH 4 PLATE ARM AS) | |
| -OR- | ||||
| 9J-9147 | [1] | NUT (2-3/4-8-THD)(FOR USE WITH 2 CHANNEL ARM AS) | ||
| 26. | 9W-0588 | [1] | BEARING (FOR USE WITH 4 PLATE ARM AS) | |
| -OR- | ||||
| 1U-1263 | [1] | BEARING (FOR USE WITH 2 CHANNEL ARM AS) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP18890374
9N-4904: BULLDOZER AR-ANGLING
For full view, you need register
Parts for your D5HTSK II TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 6Y-6130 Y | [1] | BLADE GP-ANGLING | ||
| 6Y-6135 Y | [1] | C-FRAME GP-POWER ANGLING | ||
| 9T-9558 Y | [1] | CYLINDER GP-TILT | ||
| 9T-9273 Y | [2] | CYLINDER GP-ANGLING | ||
| 6E-0367 Y | [2] | CYLINDER GP-LIFT | ||
| 6Y-6077 Y | [1] | LINES GP-ANGLE & TILT | ||
| 6Y-8115 Y | [1] | PIN GP-CYLINDER | ||
| 8E-2796 Y | [1] | SINGLETREE GP | ||
| 9N-4821 Y | [2] | STEP GP | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER | ||
| BACK OF MOLDBOARD-NEAR TOP AT RH END | ||||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP18890375
9U-8236: BULLDOZER AR-PWR ANGLE & TILT
9U-8236 BULLDOZER AR-PWR ANGLE & TILT
S/N 7DH1-UP
POWER ANGLE & TILT
AN ATTACHMENT
S/N 7DH1-UP
POWER ANGLE & TILT
AN ATTACHMENT
For full view, you need register
Parts for your D5HTSK II TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8E-9494 Y | [1] | BLADE GP-ANGLING | ||
| 6Y-6135 Y | [1] | C-FRAME GP-POWER ANGLING | ||
| 9T-9558 Y | [1] | CYLINDER GP-TILT | ||
| 9T-9273 Y | [2] | CYLINDER GP-ANGLING | ||
| 6E-0367 Y | [2] | CYLINDER GP-LIFT | ||
| 6Y-6077 Y | [1] | LINES GP-ANGLE & TILT | ||
| 6Y-8115 Y | [1] | PIN GP-CYLINDER | ||
| 8E-2796 Y | [1] | SINGLETREE GP | ||
| 9N-4821 Y | [2] | STEP GP | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER | ||
| BACK OF MOLDBOARD-NEAR TOP AT RH END | ||||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP18890376
6Y-6135: C-FRAME GP-POWER ANGLING
6Y-6135 C-FRAME GP-POWER ANGLING
S/N 4ZH1-99999
PART OF 9N-4904 BULLDOZER AR-ANGLING
AN ATTACHMENT
S/N 4ZH1-99999
PART OF 9N-4904 BULLDOZER AR-ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D5HTSK II TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9J-2365 | [2] | RETAINER | |
| 2. | 7X-0379 | [4] | BOLT (7/8-9X1.5-IN) | |
| 3. | 6Y-4027 | [2] | PIN | |
| 4. | 3G-8891 | [4] | SPACER (45X50X18-MM THK) | |
| 5. | 3G-8900 | [4] | PIN | |
| 6. | 4T-0231 | [4] | RETAINER | |
| 7. | 8C-4436 | [4] | BOLT (1/2-13X1.375-IN) | |
| 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 8. | 6Y-6775 | [1] | PIN | |
| 9. | 6Y-6770 | [2] | SPACER (64X71X23.5-MM THK) | |
| 10. | 8E-6221 | [1] | PIN | |
| 11. | 8G-5243 | [2] | BEARING | |
| 12. | 4J-0805 B | [14] | WASHER (1.781X2.5X0.12-IN THK) | |
| 13. | 9S-1336 B | [8] | WASHER | |
| 14. | 7K-6058 | [1] | BOLT-12 POINT HEAD (1/2-13X2.5-IN) | |
| 15. | 6Y-6773 | [1] | SPACER (64X71X55-MM THK) | |
| 16. | 6Y-6769 | [1] | SPACER | |
| 17. | 8T-9398 | [2] | BOLT (3/4-10X1.75-IN) | |
| 18. | 6Y-6581 | [1] | RETAINER | |
| 19. | 3B-8489 | [2] | FITTING-GREASE | |
| 20. | 6Y-6136 | [1] | C-FRAME AS | |
| 8S-6004 | [1] | BOSS | ||
| 21. | 4T-1326 B | BRACKET (89MM HOLES) | ||
| 9W-6111 B | BRACKET (82MM HOLES) | |||
| 22. | 6Y-6217 | [1] | TOWER AS | |
| 23. | 6Y-6236 | [2] | BUSHING | |
| 24. | 6Y-6234 | [2] | BEARING | |
| 25. | 6Y-4388 | [1] | BEARING-THRUST | |
| 26. | 6Y-4389 | [1] | SPACER (78X87X66.5-MM THK) | |
| 27. | 6D-0217 | [2] | BUSHING | |
| 28. | 9P-7849 | [6] | BOSS | |
| 29. | 4T-2169 | [1] | TOWER AS (RH) | |
| 30. | 8E-6220 | [1] | PIN AS | |
| 31. | 4T-5274 | TOWER AS (LH) | ||
| 32. | 9W-5375 | [2] | BAR | |
| 33. | 8P-9770 | [1] | PLATE | |
| B | USE AS REQUIRED | |||
#SEBP18890377
6Y-6135: C-FRAME GP-POWER ANGLING
6Y-6135 C-FRAME GP-POWER ANGLING
S/N 4ZH1-99999; 7DH1-UP
PART OF 9N-4904 BULLDOZER AR-ANGLING, 9U-8236 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
S/N 4ZH1-99999; 7DH1-UP
PART OF 9N-4904 BULLDOZER AR-ANGLING, 9U-8236 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
For full view, you need register
Parts for your D5HTSK II TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9J-2365 | [2] | RETAINER | |
| 2. | 7X-0379 | [4] | BOLT (7/8-9X1.5-IN) | |
| 3. | 8E-9214 C | [2] | PIN | |
| 4. | 3G-8891 | [4] | SPACER (45X50X18-MM THK) | |
| 5. | 3G-8900 | [4] | PIN | |
| 6. | 4T-0231 | [4] | RETAINER | |
| 7. | 8C-4436 | [4] | BOLT (1/2-13X1.375-IN) | |
| 8. | 6Y-6775 | [1] | PIN | |
| 9. | 6Y-6770 | [2] | SPACER (64X71X23.5-MM THK) | |
| 10. | 8E-6221 | [1] | PIN | |
| 11. | 8G-5243 | [2] | BEARING | |
| 12. | 4J-0805 B | [14] | WASHER (1.781X2.5X0.12-IN THK) | |
| 13. | 9S-1336 B | [8] | WASHER | |
| 14. | 7K-6058 | [1] | BOLT-12 POINT HEAD (1/2-13X2.5-IN) | |
| 15. | 6Y-6773 | [1] | SPACER (64X71X55-MM THK) | |
| 16. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 17. | 8T-9398 | [2] | BOLT (3/4-10X1.75-IN) | |
| 18. | 6Y-6581 | [1] | RETAINER | |
| 19. | 6Y-6136 | [1] | C-FRAME AS | |
| 8S-6004 | [1] | BOSS | ||
| 20. | 4T-1326 B | [2] | BRACKET (89MM HOLES) | |
| 9W-6111 B | [1] | BRACKET (82MM HOLES) | ||
| 21. | 6Y-6217 | [1] | TOWER AS | |
| 22. | 6Y-6236 | [2] | BUSHING | |
| 23. | 6Y-6234 | [2] | BEARING | |
| 24. | 6Y-4388 | [1] | BEARING-THRUST | |
| 25. | 6Y-4389 | [1] | SPACER (78X87X66.5-MM THK) | |
| 26. | 6D-0217 | [2] | BUSHING | |
| 27. | 9P-7849 | [6] | BOSS | |
| 28. | 4T-2169 | [1] | TOWER AS (RH) | |
| 29. | 8E-6220 | [1] | PIN AS | |
| 30. | 4T-5274 | [1] | TOWER AS (LH) | |
| 31. | 9W-5375 | [2] | BAR | |
| 32. | 8P-9770 | [1] | PLATE | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP18890378
6Y-6135: C-FRAME GP-POWER ANGLING
6Y-6135 C-FRAME GP-POWER ANGLING
S/N 7DH1-UP
PART OF 9U-8236 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
S/N 7DH1-UP
PART OF 9U-8236 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
For full view, you need register
Parts for your D5HTSK II TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9J-2365 | [2] | RETAINER | |
| 2. | 7X-0379 | [4] | BOLT (7/8-9X1.5-IN) | |
| 3. | 6Y-4027 C | [2] | PIN | |
| 4. | 3G-8891 | [4] | SPACER (45X50X18-MM THK) | |
| 5. | 3G-8900 | [4] | PIN | |
| 6. | 4T-0231 | [4] | RETAINER | |
| 7. | 8C-4436 | [4] | BOLT (1/2-13X1.375-IN) | |
| 8. | 6Y-6136 | [1] | C-FRAME AS | |
| 8S-6004 | [1] | BOSS | ||
| 8A. | 4T-1326 | [3] | BRACKET | |
| 8B. | 3G-8887 | [1] | COLLAR | |
| 8C. | 9P-7849 | [6] | BOSS | |
| 8D. | 4T-2169 | [1] | TOWER AS (RH) | |
| 8E. | 8E-6220 | [1] | PIN AS | |
| 8F. | 4T-5274 | TOWER AS (LH) | ||
| 8G. | 9W-5375 | [2] | BAR | |
| 8H. | 8P-9770 | [1] | PLATE | |
| 8J. | 6Y-6217 | [1] | TOWER AS | |
| 8K. | 6Y-6236 | [2] | BUSHING | |
| 8L. | 6Y-6234 | [2] | BEARING | |
| 8M. | 6Y-4388 | [1] | BEARING-THRUST | |
| 8N. | 6Y-4389 | [1] | SPACER (78X87X66.5-MM THK) | |
| 8P. | 6D-0217 | [2] | BUSHING | |
| 8R. | 8J-8489 | [6] | BOSS | |
| 9. | 6Y-6775 | [1] | PIN | |
| 10. | 6Y-6770 | [2] | SPACER (64X71X23.5-MM THK) | |
| 11. | 8E-6221 | [1] | PIN | |
| 12. | 105-3015 C | [2] | BUSHING | |
| 13. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 4J-0805 BC | [14] | WASHER (1.781X2.5X0.12-IN THK) | |
| 15. | 9S-1336 B | [8] | WASHER (1.5MM THK) | |
| 16. | 7K-6058 | [1] | BOLT-12 POINT HEAD (1/2-13X2.5-IN) | |
| 17. | 3E-6757 C | [4] | SEAL-LIP TYPE | |
| 18. | 3B-8489 C | [2] | FITTING-GREASE (C FRAME) | |
| 21. | 8T-9398 | [2] | BOLT (3/4-10X1.75-IN) | |
| 22. | 6Y-6581 | [1] | RETAINER | |
| 24. | 6Y-6773 | [1] | SPACER (64X71X55-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP18890379
3W-3477: LINKAGE GP-IMPLEMENT
3W-3477 LINKAGE GP-IMPLEMENT
S/N 7EG1-UP
WINCH
PART OF 7T-9867 INSTALLATION AR-WINCH
AN ATTACHMENT
S/N 7EG1-UP
WINCH
PART OF 7T-9867 INSTALLATION AR-WINCH
AN ATTACHMENT
For full view, you need register
Parts for your D5HTSK II TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-5977 | [1] | GUARD | |
| 2. | 4L-9337 | [3] | BOLT (3/8-16X1.5-IN) | |
| 5P-1075 | [3] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 3. | 8T-1173 | [2] | SEAL-LIP TYPE | |
| 4. | 1B-0676 | [8] | PIN | |
| 3B-4615 | [8] | PIN-COTTER | ||
| 5. | 4K-6287 | [1] | LEVER | |
| 6. | 8T-2502 | [1] | BOLT (3/8-16X1.125-IN) | |
| 7. | 7V-0989 | [1] | SPACER | |
| 8. | 8T-1177 | [2] | BEARING-ROLLER | |
| 9. | 3W-3349 | [1] | BRACKET | |
| 10. | 3W-3768 | [1] | SHAFT | |
| 1B-8706 | [2] | KEY-WOODRUFF | ||
| 11. | 5G-1340 | [2] | SPACER | |
| 12. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
| 13. | 8T-4896 | [9] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 14. | 3W-2671 | [1] | COVER | |
| 15. | 9B-7237 | [5] | BOLT (3/8-16X1.25-IN) | |
| 16. | 2K-4973 | [3] | LOCKNUT (3/8-16-THD) | |
| 17. | 3W-3752 | [1] | LEVER | |
| 18. | 3W-1482 | [1] | SHAFT AS | |
| 19. | 3W-3346 | [1] | ROD | |
| 20. | 4D-4064 | [2] | ROD END (3/8-24-THD) | |
| 21. | 3S-2713 | [8] | NUT-FULL (3/8-24-THD) | |
| 22. | 2K-0400 | [3] | END-YOKE ROD | |
| 23. | 8T-8917 | [2] | BOLT (1/2-13X1.25-IN) | |
| 5P-1076 | [2] | WASHER-HARD (13.5X30X4-MM THK) | ||
| 24. | 3W-3343 | [1] | BRACKET | |
| 25. | 3W-4589 | [1] | SHAFT | |
| 26. | 8T-0798 | [1] | BEARING-ROLLER | |
| 27. | 8T-0741 | [1] | SEAL-LIP TYPE | |
| 28. | 2L-6267 | [1] | LOCKNUT (3/8-24-THD) | |
| 29. | 5P-8167 | [1] | BOLT (3/8-16X0.625-IN) | |
| 30. | 3W-3347 | [1] | ROD | |
| 31. | 5J-5315 | [1] | ROD END | |
| 32. | 1M-1341 | [3] | END-YOKE ROD | |
| 33. | 3W-3345 | [1] | ROD | |
| 34. | 5J-6131 | [1] | ROD-CONTROL | |
| 35. | 5S-7382 | [4] | BOLT (3/8-16X1.375-IN) | |
| 36. | 4K-7993 | [1] | ROD | |
| 37. | 3W-7525 | [1] | ROD | |
| 38. | 6V-8183 | [3] | NUT-FULL (3/8-24-THD) | |
| 39. | 1F-5403 | [2] | ROD END-ADJUSTABLE | |
| 40. | 3W-3341 | [1] | LEVER | |
| 41. | 1A-9579 | [1] | BOLT (5/16-18X1.5-IN) | |
| 42. | 1B-8704 | [2] | KEY-WOODRUFF | |
| 43. | 3W-3342 | [1] | LEVER | |
| 44. | 1B-7182 | [1] | BOLT (5/16-18X1.25-IN) | |
| 45. | 3W-3340 | [1] | LEVER | |
| 46. | 5S-7382 | [1] | BOLT (3/8-16X1.375-IN) | |
| 47. | 2P-3980 | [1] | LEVER | |
| 48. | 3W-3336 | [1] | LEVER | |
| 49. | 1B-0676 | [1] | PIN | |
| 3B-4615 | [1] | PIN-COTTER | ||
| 50. | 7M-8459 | [1] | LOCKNUT | |
| 51. | 7X-0591 | [4] | WASHER-HARD (17X29X3-MM THK) | |
| 52. | 9B-7237 | [3] | BOLT (3/8-16X1.25-IN) | |
| 53. | 3W-3757 | [1] | BRACKET | |
| 54. | 8T-2502 | [2] | BOLT (3/8-16X1.125-IN) | |
| 55. | 4L-7551 | [1] | ROD-CONTROL | |
| 56. | 4D-4064 | [1] | ROD END (3/8-24-THD) | |
| 57. | 3S-2713 | [2] | NUT-FULL (3/8-24-THD) | |
| 58. | 3K-4290 | [1] | BALL JOINT AS | |
| 59. | 8T-2637 | [1] | PIN-SPRING | |
| 60. | 8T-0741 | [2] | SEAL-LIP TYPE | |
| 61. | 8T-0798 | [2] | BEARING-ROLLER | |
| 62. | 3W-3761 | [1] | BRACKET | |
| 63. | 3W-3756 | [1] | LEVER | |
| 64. | 3W-3771 | [1] | LEVER | |
| 65. | 3W-3767 | [1] | SHAFT | |
| 66. | 1B-8706 | [4] | KEY-WOODRUFF | |
| 67. | 3W-3768 | [1] | SHAFT | |
| 68. | 3W-3772 | [1] | LEVER | |
| 69. | 2L-6267 | [1] | LOCKNUT (3/8-24-THD) | |
| 70. | 8T-1177 | [6] | BEARING-ROLLER | |
| 71. | 8T-1173 | [6] | SEAL-LIP TYPE | |
| 72. | 8T-4994 | [7] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 73. | 1D-5874 | [1] | SPACER (0.766X1.25X1.125-IN THK) | |
| 74. | 6T-7162 | [1] | SEAL-DOMED | |
| 75. | 6T-7163 | [1] | SEAL-DOMED | |
| 76. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 77. | 1M-4533 | [1] | LEVER | |
| 78. | 8E-4149 | [1] | CUSHION AS (RH) | |
| 79. | 8E-4150 | [1] | SUPPORT-RH |
