AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7E-8818 COVER GP-CYLINDER BLOCK REAR STRUCTURE-FLYWHEEL 3412 INDUSTRIAL ENGINE


BASIC ENGINE
CYLINDER BLOCK GP
HOUSING GP-FRONT
PAN GP-OIL
VALVE MECHANISM GP
CRANKSHAFT GP

INDUSTRIAL ENGINE 3412 INDUSTRIAL ENGINE 9XF
 3412 Industrial Engine 9XF00001-UP SEBP1890 3412 9XF   (1989)

BASIC ENGINE

CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
2W-9319 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
4N-6866 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
7E-8818 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK AS
126-1372 CYLINDER BLOCK AS
CYLINDER BLOCK AS
126-1375 CYLINDER BLOCK AS
CYLINDER BLOCK AS
4P-7231 CYLINDER BLOCK AS
 

#SEBP18900010
 

7E-8818: COVER GP-CYLINDER BLOCK

7E-8818 COVER GP-CYLINDER BLOCK
REAR STRUCTURE-FLYWHEEL
i00390004 SEBP1890
7E8818 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-2772 [2] COVER  
2. 4N-0933 [2] GASKET  
3. 0S-1619 [1] BOLT (3/8-16X3-IN)  
4. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 0S-1594 [1] BOLT (3/8-16X1-IN)  
6. 0S-1566 [3] BOLT (5/8-11X1.5-IN)  
  5P-8247 [3] WASHER-HARD (17X32X3.5-MM THK)  
7. 0S-1594 B [1] BOLT (3/8-16X1-IN)  
8. 4N-1114 [1] COVER  
9. 9Y-6089 [1] GASKET  
10. 0S-1619 B [1] BOLT (3/8-16X3-IN)  
11. 5M-2894 B [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
 

#SEBP18900011
 

4N-6798: COVER GP-FRONT HOUSING

4N-6798 COVER GP-FRONT HOUSING
i00107929 SEBP1890
4N6798 COVER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-2509 [1] COVER  
  6N-2508 [1] GASKET  
2. 0S-1594 [3] BOLT (3/8-16X1-IN)  
3. 3M-0496 [1] STUD-TAPERLOCK (3/8-16X2.6-IN)  
4. 9S-8752 C [7] NUT-FULL (3/8-16-THD)  
5. 5M-2894 [11] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 9N-5576 [1] COVER-FUEL PUMP GEAR  
  4N-1998 [1] GASKET (FUEL PUMP GEAR)  
7. 5F-4899 [4] BOLT (3/8-16X5.5-IN)  
8. 0L-1352 [6] BOLT (3/8-16X3.25-IN)  
9. 2P-1974 [3] STUD-TAPERLOCK (3/8-16X4.2-IN)  
10. 4N-0933 [1] GASKET  
11. 2P-2772 [1] COVER  
12. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
13. 3K-3256 [1] STUD-TAPERLOCK (3/8-16X1.7-IN)  
14. 4P-7820 C [1] COVER-ACCESSORY DRIVE  
  5F-3144 C [1] SEAL-O-RING  
15. 4F-9081 [1] STUD  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP18900012
 

9Y-9827: COVER GP-OIL PAN

9Y-9827 COVER GP-OIL PAN -LH
LOWER STRUCTURE
i00434386 SEBP1890
9Y9827 COVER GP-OIL PAN Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 239-5572 [2] SEAL-INTEGRAL (PAN)  
2. 4N-0794 [2] COVER  
3. 0S-1588 [5] BOLT (3/8-16X1.25-IN)  
4. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 9S-4185 [1] PLUG (3/4-16-THD)  
6. 8L-2786 [1] SEAL-O-RING  
7. 061-9458 [1] SEAL-O-RING  
8. 9X-6451 [1] PLUG-DRAIN (MAGNETIC)(ENGINE OIL PAN)  
9. 4P-0519 [1] ADAPTER AS-DRAIN  
  109-5840 [1] ADAPTER-PLUG  
  109-5839 [1] PLUG-DRAIN (ENGINE OIL PAN)  
10. 379-5053 [1] SEAL-O-RING  
11. 0S-1587 [2] BOLT (1/2-13X1.75-IN)  
12. 3B-0551 [1] PLUG-PIPE  
13. 4N-9968 [1] PLUG  
14. 109-0072 [1] SEAL-O-RING  
 

#SEBP18900013
 

9Y-9828: COVER GP-OIL PAN

9Y-9828 COVER GP-OIL PAN -RH
S/N 9XF1-75; 9XF81-UP
LOWER STRUCTURE
i00434389 SEBP1890
9Y9828 COVER GP-OIL PAN Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-0519 [1] ADAPTER AS-DRAIN  
  109-5839 [1] PLUG-DRAIN (ENGINE OIL PAN)  
  109-5840 [1] ADAPTER-PLUG (PAN)  
2. 239-5572 [2] SEAL-INTEGRAL  
3. 4N-0794 [2] COVER  
4. 0S-1588 [6] BOLT (3/8-16X1.25-IN)  
5. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 4N-9968 [2] PLUG  
7. 109-0072 [2] SEAL-O-RING  
8. 379-5053 [1] SEAL-O-RING  
9. 9S-4185 [1] PLUG (3/4-16-THD)  
10. 8L-2786 [1] SEAL-O-RING  
11. 0S-1587 [2] BOLT (1/2-13X1.75-IN)  
12. 3B-0551 [2] PLUG-PIPE  
 

#SEBP18900014
 

9Y-8481: COVER GP-VALVE MECHANISM

9Y-8481 COVER GP-VALVE MECHANISM -RH SERVICE
S/N 9XF1-75; 9XF81-UP
i00433096 SEBP1890
9Y8481 COVER GP-VALVE MECHANISM Parts scheme 9Y8481 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-4980 [2] BASE-VALVE MECHANISM COVER  
2. 7C-6514 [4] ADAPTER  
3. 9L-8925 [28] BOLT (5/16-18X1.25-IN)  
4. 5P-5678 BD SEAL  
5. 272-2583 [4] SEAL-O-RING  
6. 9Y-0015 [2] COVER-ROCKER ARM  
7. 272-2583 [3] SEAL-O-RING  
8. 7C-6514 [3] ADAPTER  
9. 9L-8925 [29] BOLT (5/16-18X1.25-IN)  
10. 5P-5678 BD SEAL  
11. 7C-7780 [1] COVER-ROCKER ARM  
12. 9Y-0015 [1] COVER-ROCKER ARM  
13. 4P-4980 [2] BASE-VALVE MECHANISM COVER  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
 

#SEBP18900015
 

9Y-8482: COVER GP-VALVE MECHANISM

9Y-8482 COVER GP-VALVE MECHANISM -LH SERVICE
i00433102 SEBP1890
9Y8482 COVER GP-VALVE MECHANISM Parts scheme 9Y8482 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 272-2583 [3] SEAL-O-RING  
2. 7C-6514 [3] ADAPTER  
3. 9L-8925 [30] BOLT (5/16-18X1.25-IN)  
4. 5P-5678 BD SEAL  
5. 7C-7780 [1] COVER-ROCKER ARM  
6. 9Y-0015 [1] COVER-ROCKER ARM  
7. 4W-2580 [2] BASE-VALVE MECHANISM COVER  
8. 4W-2580 [2] BASE-VALVE MECHANISM COVER  
9. 7C-6514 [4] ADAPTER  
10. 9L-8925 [29] BOLT (5/16-18X1.25-IN)  
11. 5P-5678 BD SEAL  
12. 272-2583 [4] SEAL-O-RING  
13. 9Y-0015 [2] COVER-ROCKER ARM  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
 

#SEBP18900016
 

384-9906: CRANKSHAFT AS

384-9906 CRANKSHAFT AS
S/N 9XF170-UP
PART OF 4N-0922 CRANKSHAFT GP
i04789980 SEBP1890
3849906 CRANKSHAFT AS Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-2940 [1] GEAR-CRANKSHAFT (99-TEETH)  
2. 4N-0684 [1] DOWEL  
3. 7S-5005 [1] DOWEL  
 

#SEBP18900017
 

4N-0922: CRANKSHAFT GP

4N-0922 CRANKSHAFT GP
i00089669 SEBP1890
4N0922 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-4088 C [1] CRANKSHAFT AS  
2. 4N-0684 [1] DOWEL  
3. 114-0966 [1] GEAR-CRANKSHAFT (99-TEETH)  
4. 8T-6757 [6] PLUG-PIPE  
5. 7S-5005 [1] DOWEL  
6. 253-1752 J [2] PLATE-THRUST  
7. 2W-1733 [1] SEAL GP-CRANKSHAFT (FRONT)  
8. 4W-5492 J [7] BEARING-MAIN (STANDARD)  
    EACH SERVICED BY
  317-8766 [1] BEARING-MAIN (DIESEL)  
  317-8766 [1] BEARING-MAIN (GAS)  
  4W-5698 AB BEARING-MAIN (0.63-MM US)  
  4W-5699 AB BEARING-MAIN (1.27-MM US)  
  4W-5700 AB BEARING-MAIN (0.63-MM OS)  
  4W-5701 AB BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
9. 2W-1734 [1] SEAL GP-CRANKSHAFT (REAR)  
   
    AVAILABLE REPAIR KIT(S):
  243-6718 AJ KIT-CRANKSHAFT BEARING (STANDARD)  
    (INCLUDES A COMPLETE SET OF MAIN BEARINGS & THRUST PLATES)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP18900018
 

4N-0922: CRANKSHAFT GP

4N-0922 CRANKSHAFT GP
S/N 9XF170-UP
Type 1
i01131544 SEBP1890
4N0922 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-2941 C [1] CRANKSHAFT AS  
2. 4N-0684 [1] DOWEL  
3. 151-2940 [1] GEAR-CRANKSHAFT (99-TEETH)  
4. 8T-6757 [6] PLUG-PIPE  
5. 7S-5005 [1] DOWEL  
6. 253-1752 J [2] PLATE-THRUST  
7. 142-5867 [1] SEAL-CRANKSHAFT (FRONT)  
8. 4W-5492 J [7] BEARING-MAIN (STANDARD)  
    EACH SERVICED BY
  317-8766 [1] BEARING-MAIN (DIESEL)  
  321-5746 [1] BEARING-MAIN (GAS)  
  4W-5698 AB BEARING-MAIN (0.63-MM US)  
  4W-5699 AB BEARING-MAIN (1.27-MM US)  
  4W-5700 AB BEARING-MAIN (0.63-MM OS)  
  4W-5701 AB BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
9. 142-5868 [1] SEAL-CRANKSHAFT (REAR)(REAR)  
   
    AVAILABLE REPAIR KIT(S):
  243-6718 AJ KIT-CRANKSHAFT BEARING (STANDARD)  
    (INCLUDES A COMPLETE SET OF MAIN BEARINGS & THRUST PLATES)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP18900019
 

4N-0922: CRANKSHAFT GP

4N-0922 CRANKSHAFT GP
S/N 9XF170-UP
Type 2
i02302821 SEBP1890
4N0922 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 384-9906 CY [1] CRANKSHAFT AS  
2. 317-8766 J [7] BEARING-MAIN (STANDARD)  
  4W-5698 AB BEARING-MAIN (0.63-MM US)  
  4W-5699 AB BEARING-MAIN (1.27-MM US)  
  4W-5700 AB BEARING-MAIN (0.63-MM OS)  
  4W-5701 AB BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
3. 253-1752 J [2] PLATE-THRUST  
4. 319-0785 Y [1] SEAL GP-CRANKSHAFT (REAR)  
5. 319-7401 Y [1] SEAL GP-CRANKSHAFT (FRONT)  
   
    AVAILABLE REPAIR KIT(S):
  243-6718 AJ KIT-CRANKSHAFT BEARING (STANDARD)  
    (INCLUDES A COMPLETE SET OF MAIN BEARING & THRUST PLATES)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
The Cylinder Liners Have a New Appearance {1216}
2005/03/01
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
New Liner Seat Insert Available
1983/08/17
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
New Cylinder Liner Available
1986/02/01
3400 Engine Major Component Performance Guide Available
1987/07/01
Thinner Spacer Plates Available For Parts Service
1992/06/01
Connecting Rod Bearing Eliminates The Need For Mid-Life Connecting Rod Bearing Roll-In
1992/08/01
New Liner Seat Inserts Available
1992/11/01
Cylinder Pack Puller Groups Improved
1993/01/01
Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/12/01
Flywheel Housing To Cylinder Block Joint Improvements{1157,1201}
1997/01/22
New Block Cover Used{1201}
1999/05/01
Modification To Holder To Machine Counterbore On Cylinder Block
1977/03/15
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
The Cylinder Liners Have a New Appearance {1216}
2005/03/14
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Technical Information Bulletin
Liner Flange Breakage
Liner Flange Breakage
Specifications
Cylinder Block
3408C & 3412C INDUSTRIAL ENGINES
Cylinder Liners
3408C & 3412C INDUSTRIAL ENGINES
Cylinder Liner Projection
3408C & 3412C INDUSTRIAL ENGINES
Cylinder Block
3412 INDUSTRIAL ENGINES
Cylinder Liners
3412 INDUSTRIAL ENGINES
Cylinder Liner Projection
3412 INDUSTRIAL ENGINES
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Disassembly and Assembly
Spacer Plates
3408 & 3412 INDUSTRIAL ENGINES
Camshaft Bearings
3408 & 3412 INDUSTRIAL ENGINES
Cylinder Liners
3408 & 3412 INDUSTRIAL ENGINES
Crankshaft Main Bearings
3408 & 3412 INDUSTRIAL ENGINES
Piston Cooling Tubes
3408 & 3412 INDUSTRIAL ENGINES
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Liner Seat Insert Available{1217}
1983/08/15
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
New Cylinder Block Groups Used{1201}
1984/10/01
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
New Cylinder Liner Available{1201}
1986/02/10
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Holder To Machine Counterbore On Cylinder Block{0664,1201}
1977/02/28
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
Thinner Spacer Plates Available For Parts Service{1221}
1992/06/29
New Liner Seat Inserts Available{1217}
1992/11/09
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18

Caterpillar Parts SIS Catalog 3412 :

COVER GP-CYLINDER BLOCK
4N-6866 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
2W-9319 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
183-6229 COVER GP-CYLINDER BLOCK
CAMSHAFT GP
4N-0965 CAMSHAFT GP
ADAPTER GP-FLYWHEEL
9Y-9466 ADAPTER GP-FLYWHEEL
9Y-7338 ENGINE AR
9Y-7337 ENGINE AR
115-6846 ENGINE AR
COVER GP-FRONT HOUSING
4N-6798 COVER GP-FRONT HOUSING
COVER GP-OIL PAN
9Y-9827 COVER GP-OIL PAN
COVER GP-OIL PAN
9Y-9828 COVER GP-OIL PAN
COVER GP-VALVE MECHANISM
9Y-8481 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
9Y-8482 COVER GP-VALVE MECHANISM
CRANKSHAFT AS
384-9906 CRANKSHAFT AS
CRANKSHAFT GP
4N-0922 CRANKSHAFT GP
CRANKSHAFT GP
4N-0922 CRANKSHAFT GP

Truck sale:

Caterpillar 3412, mobile generator sets, Construction
95,720 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
96,795 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
93,569 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, Stationary Generator Sets, Construction
60,000 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3412, Stationary Generator Sets, Construction
159,600 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.