AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

143-0046 CYLINDER HEAD AS S/N 9XF68-UP PART OF 143-0047, 7W-2243 CYLINDER HEAD AS FIELD REPLACEMENT ORDER @@@@@143-0047@@@@@ 3412


BASIC ENGINE
CYLINDER HEAD GP

INDUSTRIAL ENGINE 3412 INDUSTRIAL ENGINE 9XF
 3412 Industrial Engine 9XF00001-UP SEBP1890 3412 9XF   (1989)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD AS
143-0046 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0047 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-2241 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-2243 CYLINDER HEAD AS
 

#SEBP18900030
 

143-0046: CYLINDER HEAD AS

143-0046 CYLINDER HEAD AS
S/N 9XF68-UP
PART OF 143-0047, 7W-2243 CYLINDER HEAD AS
FIELD REPLACEMENT ORDER @@@@@143-0047@@@@@
i00562988 SEBP1890
1430046 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0645 [10] PLUG-CUP  
2. 4N-5893 [12] INSERT-VALVE SEAT (INLET)(STANDARD)  
  7C-7602 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  7C-7603 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  7C-7604 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  7C-7605 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
3. 1W-5283 [12] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  7C-5353 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  7C-5354 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
4. 3B-0623 [12] PLUG-CUP  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP18900031
 

143-0047: CYLINDER HEAD AS

143-0047 CYLINDER HEAD AS
S/N 9XF98-UP
PART OF 141-3228 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@143-0046@@@@@
i00566897 SEBP1890
1430047 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-0046 Y [1] CYLINDER HEAD AS  
2. 173-7188 [24] GUIDE-VALVE (STANDARD)  
  7C-5306 AB GUIDE-VALVE (0.51-MM OS)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP18900032
 

7W-2241: CYLINDER HEAD AS

7W-2241 CYLINDER HEAD AS
S/N 9XF1-67
PART OF 7W-2243 CYLINDER HEAD AS, 7W-2242 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 7W-2243@@@@@
i00108864 SEBP1890
7W2241 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0645 [10] PLUG-CUP  
2. 4N-5893 [12] INSERT-VALVE SEAT (INLET)(STANDARD)  
  7C-7602 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  7C-7603 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  7C-7604 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  7C-7605 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
3. 1W-5283 [12] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  7C-5353 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  7C-5354 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
4. 3B-0623 [12] PLUG-CUP  
5. 8T-6762 [1] PLUG-PIPE (1/2-14-THD)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP18900033
 

7W-2243: CYLINDER HEAD AS

7W-2243 CYLINDER HEAD AS
S/N 9XF1-67
FIELD REPLACEMENT FOR @@@@@ 7W-2241@@@@@
i00108867 SEBP1890
7W2243 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2241 Y [1] CYLINDER HEAD AS  
2. 173-7188 [24] GUIDE-VALVE (STANDARD)  
  7C-5306 AB GUIDE-VALVE (0.51-MM OS)  
3. 2N-5775 [12] DOWEL  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP18900034
 

7W-2243: CYLINDER HEAD AS

7W-2243 CYLINDER HEAD AS
S/N 9XF68-97
PART OF 7W-2242 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@ 7W-2241@@@@@
i00089706 SEBP1890
7W2243 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-0046 CY [1] CYLINDER HEAD AS  
2. 173-7188 [24] GUIDE-VALVE (STANDARD)  
  7C-5306 AB GUIDE-VALVE (0.51-MM OS)  
3. 2N-5775 [12] DOWEL  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP18900035
 

141-3228: CYLINDER HEAD GP

141-3228 CYLINDER HEAD GP
S/N 9XF98-UP
PART OF 9Y-8510 CYLINDER HEAD GP
i00566483 SEBP1890
1413228 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-0047 Y [1] CYLINDER HEAD AS  
2. 122-0322 [12] VALVE-INLET  
3. 2A-4429 [48] LOCK-RETAINER  
4. 6N-7175 [24] ROTOCOIL AS  
    (EACH INCLUDES)
  6N-7174 [1] SHIELD-OIL  
5. 4N-5906 [24] SPRING-VALVE  
6. 122-0321 [12] VALVE-EXHAUST  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP18900036
 

7W-2242: CYLINDER HEAD GP

7W-2242 CYLINDER HEAD GP
S/N 9XF1-67
PART OF 9Y-8510 CYLINDER HEAD GP
i00108865 SEBP1890
7W2242 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2241 Y [1] CYLINDER HEAD AS  
2. 2W-2622 [12] VALVE-INLET  
3. 2N-5775 [12] DOWEL  
4. 2A-4429 [48] LOCK-RETAINER  
5. 6N-7175 [24] ROTOCOIL AS  
    (EACH INCLUDES)
5A. 6N-7174 [1] SHIELD-OIL  
6. 4N-5906 [24] SPRING-VALVE  
7. 1W-3860 [12] VALVE-EXHAUST  
8. 173-7188 [24] GUIDE-VALVE (STANDARD)  
  7C-5306 AB GUIDE-VALVE (0.51-MM OS)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP18900037
 

7W-2242: CYLINDER HEAD GP

7W-2242 CYLINDER HEAD GP
S/N 9XF68-97
PART OF 9Y-8510 CYLINDER HEAD GP
i00108866 SEBP1890
7W2242 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2243 YC [1] CYLINDER HEAD AS  
2. 115-2368 [12] VALVE-INLET  
3. 2A-4429 [48] LOCK-RETAINER  
4. 6N-7175 [24] ROTOCOIL AS  
    (EACH INCLUDES)
4A. 6N-7174 [1] SHIELD-OIL  
5. 4N-5906 [24] SPRING-VALVE  
6. 115-2367 [12] VALVE-EXHAUST  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP18900038
 

9Y-8510: CYLINDER HEAD GP

9Y-8510 CYLINDER HEAD GP
S/N 9XF1-66
i00433154 SEBP1890
9Y8510 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2242 Y [1] CYLINDER HEAD GP  
2. 4N-0932 [2] PLUG-CUP  
3. 5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 7E-7312 [2] GASKET-CYLINDER HEAD  
5. 0L-1352 [14] BOLT (3/8-16X3.25-IN)  
6. 5M-6214 [2] PLUG (1/8-27 PTF)  
7. 6N-6547 [1] SUPPORT (TIMING GEAR)  
8. 2H-3750 [40] BOLT (3/4-16X7.5-IN)  
9. 5H-1504 [40] WASHER-HARD (20X33.5X5-MM THK)  
10. 4W-1055 [48] SEAL  
11. 7W-5435 [12] ADAPTER-NOZZLE  
12. 5H-7153 [12] SEAL-O-RING  
13. 4N-7253 [12] GASKET-CHAMBER  
14. 4S-6137 [24] STUD-TAPERLOCK (3/8-16X3.1-IN)  
15. 7E-0039 [1] BRACKET  
16. 3B-1915 [2] BOLT (3/8-16X1.375-IN)  
17. 1B-5174 [2] PLUG-PIPE  
18. 5P-0063 [4] PLUG-CUP  
19. 5B-2638 [2] BOLT (3/8-16X5.25-IN)  
20. 0T-0055 [2] BOLT (3/8-16X4.25-IN)  
21. 6N-6546 [1] SUPPORT (TIMING GEAR)  
22. 2B-0858 [4] PLUG-PIPE  
23. 9Y-7128 [1] BRACKET  
24. 8S-9191 [4] BOLT (3/8-16X4-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP18900039
 

9Y-8510: CYLINDER HEAD GP

9Y-8510 CYLINDER HEAD GP
S/N 9XF67-UP
i00433158 SEBP1890
9Y8510 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2242 Y [2] CYLINDER HEAD GP  
2. 4N-0932 [2] PLUG-CUP  
3. 5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 7E-7312 [2] GASKET-CYLINDER HEAD  
5. 0L-1352 [14] BOLT (3/8-16X3.25-IN)  
6. 8T-6764 [2] PLUG-PIPE (1/8-27-THD)  
7. 6N-6547 [1] SUPPORT (TIMING GEAR)  
8. 2H-3750 [40] BOLT (3/4-16X7.5-IN)  
9. 5H-1504 [40] WASHER-HARD (20X33.5X5-MM THK)  
10. 3E-6772 [48] SEAL (WATER)  
11. 100-6920 [12] ADAPTER-NOZZLE  
12. 8M-5249 [12] SEAL-O-RING  
13. 4N-7253 [12] GASKET-CHAMBER  
14. 106-1792 [24] STUD-TAPERLOCK (3/8-16X4-IN)  
15. 7E-0039 [1] BRACKET  
16. 3B-1915 [2] BOLT (3/8-16X1.375-IN)  
17. 7X-7731 [2] PLUG-PIPE (3/4-14-THD)  
18. 5P-0063 [4] PLUG-CUP  
19. 5B-2638 [2] BOLT (3/8-16X5.25-IN)  
20. 0T-0055 [2] BOLT (3/8-16X4.25-IN)  
21. 6N-6546 [1] SUPPORT (TIMING GEAR)  
22. 8T-6762 [4] PLUG-PIPE (1/2-14-THD)  
23. 9Y-7128 [1] BRACKET  
24. 8S-9191 [4] BOLT (3/8-16X4-IN)  
25. 0L-1352 [4] BOLT (3/8-16X3.25-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem "Use Again" Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
New High Alloy Material Is Used In Cylinder Head Assemblies
1984/10/24
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
Improved Head Gasket Used; Service Tips
1990/03/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/01
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/18
New Intake And Exhaust Valves Used {1105,1100}
1994/06/01
New Rocker Arm Adjustment Screw Used To Adjust Valve Clearance {1123,1100}
1994/06/01
New Valve Lifter Assembly Provides Improved Lubrication Of Lifter Roller And Camshaft Lobes {1209,1210}
1994/06/01
Valve Lash Adjustment Intervals{1105}
1995/08/01
New And Reconditioned Valve Projection Specifications{1105}
1995/09/01
Be Sure To Use The Correct Inlet And Exhaust Valves In Engines Equipped With Valve Bridges That Do Not Ride On Dowels{1105,1121}
1998/03/01
Recommended Repairs After Cylinder Head Gasket Failure {1101}
1999/11/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
5P8700 Lifting Brackets Permit Cylinder Head Assembly To Be Removed And Installed
1978/07/05
Remanufactured 3412 Crankshafts {1100}
2000/01/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Improved Cylinder Head Assemblies Are Available through Cat Reman for Certain Commercial Engines {1100}
2014/10/10
A New Water Seal Assembly Is Now Used on All 3408, 3412, C27 and C32 Commercial Engines {1100, 7555}
2013/05/13
Special Instruction
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Specifications
Fuel Injection Nozzle And Adapter
3408C & 3412C INDUSTRIAL ENGINES
Valves, Valve Springs And Valve Seat Inserts
3408C & 3412C INDUSTRIAL ENGINES
Cylinder Heads
3408C & 3412C INDUSTRIAL ENGINES
Fuel Injection Nozzle And Adapter
3412 INDUSTRIAL ENGINES
Valves, Valve Springs And Valve Seat Inserts
3412 INDUSTRIAL ENGINES
Cylinder Heads
3412 INDUSTRIAL ENGINES
Tool Operating Manual
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Service Letter-China
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
Service Letter-APD
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Disassembly and Assembly
Cylinder Head
3408 & 3412 INDUSTRIAL ENGINES
Valves
3408 & 3412 INDUSTRIAL ENGINES
Valve Guides
3408 & 3412 INDUSTRIAL ENGINES
Bridge Dowels
3408 & 3412 INDUSTRIAL ENGINES
Valve Seat Inserts
3408 & 3412 INDUSTRIAL ENGINES
Fuel Injection Nozzles & Adapters
3408 & 3412 INDUSTRIAL ENGINES
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New Instruction Card Available For 6V87 Valve Stem Gauge{0653}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
New Liner Seat Insert Available{1217}
1983/08/15
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
New High Alloy Material Is Used In Cylinder Head Assemblies{1101}
1984/10/15
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads{0663,1101}
1977/06/20
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08

Caterpillar Parts SIS Catalog 3412 :

CYLINDER BLOCK GP
7E-3762 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-3762 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4P-7230 CYLINDER BLOCK GP
CYLINDER BLOCK GP
126-1374 CYLINDER BLOCK GP
CYLINDER BLOCK GP
126-1373 CYLINDER BLOCK GP
CYLINDER BLOCK GP
123-1032 CYLINDER BLOCK GP
CYLINDER BLOCK AS
9Y-9164 CYLINDER BLOCK AS
CYLINDER BLOCK AS
4P-7231 CYLINDER BLOCK AS
CYLINDER HEAD AS
143-0047 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-2241 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-2243 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-2243 CYLINDER HEAD AS
CYLINDER HEAD GP
141-3228 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2242 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2242 CYLINDER HEAD GP
CYLINDER HEAD GP
9Y-8510 CYLINDER HEAD GP

Truck sale:

Caterpillar 3412, mobile generator sets, Construction
95,720 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
96,795 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
93,569 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, Stationary Generator Sets, Construction
60,000 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3412, Stationary Generator Sets, Construction
159,600 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.