AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9Y-6145 PUMP GP-FUEL INJECTION PART OF 9Y-6146 PUMP GP-GOV & FUEL INJ Type 2 3412 INDUSTRIAL ENGINE


FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
PUMP GP-FUEL TRANSFER
GOVERNOR GP

INDUSTRIAL ENGINE 3412 INDUSTRIAL ENGINE 9XF
 3412 Industrial Engine 9XF00001-UP SEBP1890 3412 9XF   (1989)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
116-4074 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
9Y-6145 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
9Y-6145 PUMP GP-FUEL INJECTION
PUMP GP-GOV & FUEL INJ
116-4073 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
116-4075 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
9Y-6146 PUMP GP-GOV & FUEL INJ
 

#SEBP18900140
 

9Y-6145: PUMP GP-FUEL INJECTION

9Y-6145 PUMP GP-FUEL INJECTION
PART OF 9Y-6146 PUMP GP-GOV & FUEL INJ
Type 2
i00444624 SEBP1890
9Y6145 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-7156 [1] HOUSING AS-PUMP  
2. 9S-8001 [2] PLUG  
3. 4J-7533 [2] SEAL-O-RING  
4. 9S-8002 [1] PLUG (7/16-20-THD)  
5. 3J-7354 [1] SEAL-O-RING  
6. 2A-0762 [2] BOLT (1/4-20X0.625-IN)  
7. 9Y-6088 [2] COVER-FUEL GALLERY  
8. 9Y-6087 [2] GASKET-GALLERY  
9. 7C-6617 [12] BUSHING-TERMINAL  
10. 9X-7735 C [12] SEAL-O-RING  
11. 8N-0672 [12] SPACER  
12. 108-6630 CY [12] PUMP GP-FUEL INJECTION  
13. 9Y-7241 [1] PLATE AS  
14. 9Y-7515 [1] ADAPTER AS  
15. 1T-0099 [1] PIN-SPRING  
16. 8S-6814 [6] PIN  
17. 9S-8007 [5] PLUG  
  7J-0204 [5] SEAL-O-RING  
18. 9Y-8056 [1] RACK AS-REGULATING (LH)  
  7W-7819 [1] MAGNET  
19. 7E-6011 C [12] LIFTER AS  
20. 7F-2836 [2] LOCK  
21. 9Y-6090 [1] PLATE  
22. 9Y-5894 [1] CAMSHAFT AS  
  9Y-6161 [1] DOWEL-ORIFICE  
23. 1H-0974 [1] DOWEL  
24. 9Y-6080 [1] RACK-REGULATOR (RH)  
25. 9Y-8723 [1] GASKET-HOUSING  
26. 7B-2742 [6] BOLT (1/4-20X1.25-IN)  
27. 8H-3127 [2] BOLT (1/4-20X0.75-IN)  
28. 0S-1615 [28] BOLT (1/4-20X0.75-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP18900141
 

145-8855: PUMP GP-FUEL PRIMING

145-8855 PUMP GP-FUEL PRIMING
S/N 9XF140-173
i00658601 SEBP1890
1458855 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
2. 137-5541 [1] PUMP GP-FUEL PRIMING  
3. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
4. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
5. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
6. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
 

#SEBP18900142
 

4N-3287: PUMP GP-FUEL PRIMING

4N-3287 PUMP GP-FUEL PRIMING
i00107921 SEBP1890
4N3287 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
2. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
3. 7X-2501 [1] BOLT (1/4-20X1.25-IN)  
4. 105-2508 [1] PUMP AS-FUEL PRIMING  
5. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
6. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
 

#SEBP18900143
 

8N-3365: PUMP GP-FUEL PRIMING

8N-3365 PUMP GP-FUEL PRIMING
PART OF 9Y-8483 FILTER GP-PRIMARY FUEL
i00157299 SEBP1890
8N3365 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6350 [1] BASE AS-FUEL FILTER  
1A. 8N-0803 [1] BASE-FILTER  
1B. 7E-5346 [1] VALVE AS (FUEL CHECK)  
1C. 9S-8003 [2] PLUG (1/2-20-THD)  
1D. 1J-9671 [2] SEAL-O-RING  
2. 105-2508 [1] PUMP AS-FUEL PRIMING  
3. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
  5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
5. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
 

#SEBP18900144
 

7E-5789: PUMP GP-FUEL TRANSFER

7E-5789 PUMP GP-FUEL TRANSFER
S/N 9XF1-75
ONE-SECTION GEAR
PART OF 9Y-6147 PUMP GP-GOV & FUEL INJ
i00406803 SEBP1890
7E5789 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] BODY AS  
2. 5P-9294 [1] SEAL-LIP TYPE  
3. 6V-8977 [1] SEAL-LIP TYPE  
4. 7E-7745 [1] BEARING  
5. 6V-5218 M [2] BOLT (M8X1.25X35-MM)  
  9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
6. 9S-8004 [1] PLUG (9/16-18-THD)  
  6V-5049 [1] SEAL-O-RING  
7. 6N-1069 [1] SPRING  
8. 9Y-4635 [1] VALVE-PRESSURE RELIEF (FUEL)  
9. 4P-0989 [1] COVER AS  
10. 7E-5346 [1] VALVE AS  
11. 8C-5197 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP18900145
 

116-4073: PUMP GP-GOV & FUEL INJ

116-4073 PUMP GP-GOV & FUEL INJ
S/N 9XF81-UP
PART OF 116-4075 PUMP GP-GOV & FUEL INJ
i00482847 SEBP1890
1164073 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-4074 Y [1] PUMP GP-FUEL INJECTION  
2. 4P-8235 Y [1] GOVERNOR GP  
3. 9Y-6074 [1] LINK-RACK  
4. 128-5463 [1] PIN-CONTROL  
5. 6I-1324 [1] GEAR AS (23 TEETH)  
6. 9Y-8058 [1] GASKET  
7. 104-5604 [1] WASHER (7.2X25X2-MM THK)  
8. 3B-7614 [2] BOLT (3/8-16X4-IN)  
9. 1B-2714 [1] BOLT (1/4-20X2.5-IN)  
10. 5P-0537 [11] WASHER-HARD (7.2X14.5X2-MM THK)  
11. 8F-8178 [1] BOLT (1/4-20X3.25-IN)  
12. 1B-2713 [3] BOLT (1/4-20X1.75-IN)  
13. 0S-1616 [2] BOLT (1/4-20X1-IN)  
14. 4N-1767 [1] VALVE-BYPASS  
15. 9Y-6083 [1] SPRING-VALVE  
16. 3K-0360 [1] SEAL-O-RING  
17. 9Y-6084 [1] VALVE AS-BYPASS  
18. 9Y-6086 [1] HOUSING-VALVE  
19. 1J-9671 [1] SEAL-O-RING  
20. 177-1450 [2] BOLT-SOCKET HEAD  
21. 9Y-6076 [1] BAR-RACK CONTROL  
22. 104-5010 [1] PLUG-RACK  
23. 104-5603 [2] BOLT (1/4-28X1-IN)  
24. 103-0082 [1] HOUSING AS-DRIVE  
  9F-2247 [1] PLUG-PIPE (4.90MM HEX)  
  3J-7354 [1] SEAL-O-RING  
  9S-4182 [1] PLUG (7/16-20-THD)  
  103-1216 [1] PLUG (3/8-32-THD)  
  7J-0204 [1] SEAL-O-RING  
25. 2A-4781 [2] BOLT (1/4-20X2.75-IN)  
26. 7B-8167 [1] BOLT (1/4-20X1.625-IN)  
27. 105-2504 [1] SUPPORT AS  
28. 1S-5440 [1] DOWEL  
29. 1W-9509 [1] SPRING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP18900146
 

116-4075: PUMP GP-GOV & FUEL INJ

116-4075 PUMP GP-GOV & FUEL INJ
S/N 9XF81-UP
i00482856 SEBP1890
1164075 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-4073 Y [1] PUMP GP-GOV & FUEL INJ  
2. 105-2939 [1] SOLENOID-ROTARY  
3. 2H-3931 [1] SEAL-O-RING  
4. 4W-2482 [2] CLAMP  
5. 5B-7040 [2] BOLT (1/4-20X1-IN)  
6. 2A-0762 [2] BOLT (1/4-20X0.625-IN)  
7. 6I-0972 [1] GASKET  
8. 0S-1616 [7] BOLT (1/4-20X1-IN)  
9. 1B-2714 [2] BOLT (1/4-20X2.5-IN)  
10. 1B-2713 [2] BOLT (1/4-20X1.75-IN)  
11. 4B-4909 [1] SPRING  
12. 9Y-6042 [1] GASKET-OIL PUMP  
13. 108-3797 Y [1] SERVO GP-ROTARY  
14. 1F-4111 [2] BOLT (5/16-18X3.5-IN)  
  9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
15. 4P-9667 [1] COLLAR  
16. 8C-0624 [1] SEAL-O-RING  
17. 105-7573 [1] PUMP GP-FUEL TRANSFER  
18. 4W-2480 [1] NUT  
19. 5P-0537 [11] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 3E-0445 [1] CONTROL GP-ENGINE ELECTRONIC  
    (RACK SENSOR FOR ELECTRONIC FUEL SYSTEM)
21. 7F-8607 [1] SEAL-O-RING  
22. 6I-0973 [1] PLATE  
23. 6V-1903 [1] SEAL-O-RING  
24. 3E-0076 [1] SOLENOID AS (4/28-VOLT)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8732 [1] RECEPTACLE-CONNECTOR (3-PIN)  
  8T-8737 [1] PLUG-SEAL  
25. 4P-8033 [1] BRACKET AS  
  7C-2642 [3] CLIP (21.8 MM ID)  
  7C-2644 [1] CLIP (32.5 MM ID)  
  8C-3334 [8] RIVET-TUBULAR  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP18900147
 

9Y-6146: PUMP GP-GOV & FUEL INJ

9Y-6146 PUMP GP-GOV & FUEL INJ
PART OF 9Y-6147 PUMP GP-GOV & FUEL INJ
i00444627 SEBP1890
9Y6146 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-6145 Y [1] PUMP GP-FUEL INJECTION  
2. 9Y-7891 Y [1] GOVERNOR GP-ELECTRONIC  
3. 9Y-6074 [1] LINK-RACK  
4. 105-8652 [1] PIN-CONTROL  
5. 105-2504 [1] SUPPORT AS  
6. 1S-5440 [1] DOWEL  
7. 9Y-7704 [1] HOUSING AS-DRIVE  
8. 9F-2247 [1] PLUG-PIPE  
9. 9Y-8060 [1] GEAR-PUMP DRIVE (23 T)  
10. 3B-7614 [2] BOLT (3/8-16X4-IN)  
11. 9Y-8059 [1] GASKET  
12. 4B-9365 [1] BOLT (1/4-20X3-IN)  
13. 5P-0537 [20] WASHER-HARD (7.2X14.5X2-MM THK)  
14. 7B-8167 [3] BOLT (1/4-20X1.625-IN)  
15. 1B-2714 [2] BOLT (1/4-20X2.5-IN)  
16. 2A-4781 [1] BOLT (1/4-20X2.75-IN)  
17. 4F-7957 [11] BOLT (1/4-20X0.875-IN)  
18. 8B-2377 [1] BOLT (1/4-20X2-IN)  
19. 4N-1767 [1] VALVE-BYPASS  
20. 9Y-6083 [1] SPRING-VALVE  
21. 3K-0360 [1] SEAL-O-RING  
22. 9Y-6084 [1] VALVE AS-BYPASS  
23. 9Y-6086 [1] HOUSING-VALVE  
24. 1J-9671 [1] SEAL-O-RING  
25. 104-5010 [1] PLUG-RACK  
26. 1H-3340 [2] BOLT (10-24X1-IN)  
27. 104-5603 [2] BOLT (1/4-28X1-IN)  
28. 9Y-6076 [1] BAR-RACK CONTROL  
29. 104-5604 [1] WASHER (7.2X25X2-MM THK)  
30. 4N-7437 [1] PLUG  
31. 7J-0204 [1] SEAL-O-RING  
32. 9Y-8057 [1] PLATE  
33. 9Y-8058 [1] GASKET  
  Y   SEPARATE ILLUSTRATION
 

#SEBP18900148
 

9Y-6147: PUMP GP-GOV & FUEL INJ

9Y-6147 PUMP GP-GOV & FUEL INJ
S/N 9XF1-75
ELECTRONIC
i00444630 SEBP1890
9Y6147 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-6146 Y [1] PUMP GP-GOV & FUEL INJ  
2. 105-2939 [1] SOLENOID-ROTARY  
3. 2H-3931 [1] SEAL-O-RING  
4. 4W-2482 [2] CLAMP  
5. 0S-1347 [2] BOLT (1/4-20X0.75-IN)  
6. 8M-2771 [1] CLIP  
7. 7W-7290 [1] GASKET  
8. 9X-9081 [1] CONTROL GP (TRANSDUCER)  
9. 1B-2714 [2] BOLT (1/4-20X2.5-IN)  
10. 1B-2713 [2] BOLT (1/4-20X1.75-IN)  
11. 100-6619 [1] SENSOR-DIGITAL (SPEED)(ENGINE SPEED)  
12. 9Y-6042 [1] GASKET-OIL PUMP  
13. 9Y-6035 Y [1] SERVO GP-ROTARY  
14. 1F-4111 [2] BOLT (5/16-18X3.5-IN)  
  9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
15. 8T-8737 [1] PLUG-SEAL  
16. 8C-0624 [1] SEAL-O-RING  
17. 7E-5789 Y [1] PUMP GP-FUEL TRANSFER  
18. 8T-8734 [1] RECEPTACLE-CONNECTOR  
19. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 9X-7793 [1] CONTROL GP-ELECTRONIC (RACK POSITION SENSOR)  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8733 [1] PLUG-CONNECTOR (5-PIN)  
  8T-8737 [1] PLUG-SEAL  
  9W-4059 [1] WASHER  
  9X-1386 BE SLEEVE  
21. 7F-8607 [1] SEAL-O-RING  
22. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
23. 6V-1903 [1] SEAL-O-RING  
24. 3E-0076 [1] SOLENOID AS (4/28-VOLT)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8732 [1] RECEPTACLE-CONNECTOR (3-PIN)  
  8T-8737 [1] PLUG-SEAL  
25. 8L-6557 [2] CONNECTOR  
26. 9Y-4837 [1] TUBE AS  
27. 7E-0569 [1] BRACKET AS  
  9F-6445 [2] NUT-WELD (1/4-20-THD)  
28. 4K-9097 [2] NUT-WELD (5/16-18-THD)  
29. 8C-3334 [12] RIVET-TUBULAR  
30. 6B-4198 [4] BOLT (1/4-20X4.19-IN)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP18900149
 

9Y-6147: PUMP GP-GOV & FUEL INJ

9Y-6147 PUMP GP-GOV & FUEL INJ
S/N 9XF76-UP
ELECTRONIC
i00444634 SEBP1890
9Y6147 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3412 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-6146 Y [1] PUMP GP-GOV & FUEL INJ  
2. 105-2939 [1] SOLENOID-ROTARY  
3. 2H-3931 [1] SEAL-O-RING  
4. 4W-2482 [2] CLAMP  
5. 0S-1347 [2] BOLT (1/4-20X0.75-IN)  
6. 8M-2771 [1] CLIP  
7. 7W-7290 [1] GASKET  
8. 9X-9081 [1] CONTROL GP (TRANSDUCER)  
9. 1B-2714 [2] BOLT (1/4-20X2.5-IN)  
10. 1B-2713 [2] BOLT (1/4-20X1.75-IN)  
11. 100-6619 [1] SENSOR-DIGITAL (SPEED)(ENGINE SPEED)  
12. 9Y-6042 [1] GASKET-OIL PUMP  
13. 9Y-6035 Y [1] SERVO GP-ROTARY  
14. 1F-4111 [2] BOLT (5/16-18X3.5-IN)  
  9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
15. 8T-8737 [1] PLUG-SEAL  
16. 8C-0624 [1] SEAL-O-RING  
17. 105-7573 C [1] PUMP GP-FUEL TRANSFER  
18. 8T-8734 [1] RECEPTACLE-CONNECTOR  
19. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 9X-7793 [1] CONTROL GP-ELECTRONIC (RACK POSITION SENSOR)  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8733 [1] PLUG-CONNECTOR (5-PIN)  
  8T-8737 [1] PLUG-SEAL  
  9W-4059 [1] WASHER  
  9X-1386 BE SLEEVE  
21. 7F-8607 [1] SEAL-O-RING  
22. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
23. 6V-1903 [1] SEAL-O-RING  
24. 3E-0076 [1] SOLENOID AS (4/28-VOLT)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8732 [1] RECEPTACLE-CONNECTOR (3-PIN)  
  8T-8737 [1] PLUG-SEAL  
25. 8L-6557 [2] CONNECTOR  
26. 9Y-4837 [1] TUBE AS  
27. 7E-0569 [1] BRACKET AS  
  9F-6445 [2] NUT-WELD (1/4-20-THD)  
28. 4K-9097 [2] NUT-WELD (5/16-18-THD)  
29. 8C-3334 [12] RIVET-TUBULAR  
30. 6B-4198 [4] BOLT (1/4-20X4.19-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09
Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26
Explanation Of Differences In Timing Advance Information
1981/08/26
Changes In Engine RPM; Governor Does Not Operate Correctly
1982/10/20
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/10/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
New Speed Setting Clutch Group For 3161 Woodward Governors
1991/06/01
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/19
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/03/01
New 5P4185 Fuel Pump Timing Pin To Be Used Only On 3408 And 3412 Engines
1977/05/13
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
The Edge Filter Is Now Removed from Fuel Nozzles {1254, 1290}
2007/08/20
Calibration Fluid for Fuel Nozzle Test Equipment Is Available {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Injection Pump And Governor
3408C & 3412C INDUSTRIAL ENGINES
Fuel Injection Pump
3408C & 3412C INDUSTRIAL ENGINES
Fuel Injection Pump Housing
3408C & 3412C INDUSTRIAL ENGINES
Fuel Injection Nozzle And Adapter
3408C & 3412C INDUSTRIAL ENGINES
Fuel Injection Pump And Governor
3412 INDUSTRIAL ENGINES
Fuel Injection Pump
3412 INDUSTRIAL ENGINES
Fuel Injection Pump Housing
3412 INDUSTRIAL ENGINES
Fuel Injection Nozzle And Adapter
3412 INDUSTRIAL ENGINES
Governor And Fuel Pump Drive
3412 INDUSTRIAL ENGINES
Fuel Transfer Pump
3412 INDUSTRIAL ENGINES
Valve Mechanism Covers
3412 INDUSTRIAL ENGINES
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Automatic Timing Advance
3408 & 3412 INDUSTRIAL ENGINES
Fuel Injection Nozzles & Adapters
3408 & 3412 INDUSTRIAL ENGINES
Fuel Injection Pumps
3408 & 3412 INDUSTRIAL ENGINES
Fuel Transfer Pump
3408 & 3412 INDUSTRIAL ENGINES
Governor & Fuel Injection Pump Housing
3408 & 3412 INDUSTRIAL ENGINES
Fuel Shutoff Solenoid
3408 & 3412 INDUSTRIAL ENGINES
Service Magazine
Modification Of 5P1768 Pointer Assembly Necessary For Use On Some Fuel Injection Pump Housings{1253,0653}
1980/03/31
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Changes In Engine RPM; Governor Does Not Operate Correctly{1264}
1982/10/18
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
New 5P4185 Fuel Pump Timing Pin To Be Used Only On 3408 And 3412 Engines{0650,1257}
1977/05/16
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
New Speed Setting Clutch Group For 3161 Woodward Governors{1265}
1991/05/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Caterpillar Parts SIS Catalog 3412 :

PUMP GP-FUEL INJECTION
9Y-6145 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
116-4074 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
108-6633 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
108-6630 PUMP GP-FUEL INJECTION
LINES GP-FUEL RATIO CONTROL
9Y-8996 LINES GP-FUEL RATIO CONTROL
LINES GP-FUEL INJECTION
9Y-5276 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
9Y-5275 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
9Y-5274 LINES GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
145-8855 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
4N-3287 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
8N-3365 PUMP GP-FUEL PRIMING
PUMP GP-FUEL TRANSFER
7E-5789 PUMP GP-FUEL TRANSFER
PUMP GP-GOV & FUEL INJ
116-4073 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
116-4075 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
9Y-6146 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
9Y-6147 PUMP GP-GOV & FUEL INJ

Truck sale:

Caterpillar 3412, mobile generator sets, Construction
95,720 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
96,795 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
93,569 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, Stationary Generator Sets, Construction
60,000 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3412, Stationary Generator Sets, Construction
159,600 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.