AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

G3406 Engine 1RK00001-UP BASIC ENGINE Caterpillar SIS



GAS ENGINE G3406 GAS ENGINE 1RK
 G3406 Engine 1RK00001-UP SEBP1891 G3406 1RK   (1990)

Parts group G3406:

  For full view, you need register
BASIC ENGINE
CAMSHAFT GP
CAMSHAFT GP
4P-7697 CAMSHAFT GP
4P-7697 CAMSHAFT GP
S/N 1RK1-UP
330-4929 KIT-BEARING
330-4929 KIT-BEARING
S/N 1RK1-UP
OPTIONAL SERVICE REPAIR & INCLUDES STANDARD MAIN & THRUST BEARINGS
FIELD INSTALLATION
COUPLING GP
COUPLING GP-GENERATOR
109-3319 COUPLING GP-GENERATOR
109-3319 COUPLING GP-GENERATOR
S/N 8JF1-UP; 9FF1-UP
FOR USE WITH 440 PERMANENT MAGNET GENERATOR
AN ATTACHMENT
COUPLING GP-GENERATOR
133-9878 COUPLING GP-GENERATOR
133-9878 COUPLING GP-GENERATOR
S/N 9FF1-UP
FOR USE WITH 440 FRAME GENERATORS
AN ATTACHMENT
COUPLING GP-GENERATOR
4P-3359 COUPLING GP-GENERATOR
4P-3359 COUPLING GP-GENERATOR
S/N 8JF1-UP; 9FF1-UP
FOR USE WITH 440 PRIME GENERATORS
AN ATTACHMENT
CRANKSHAFT GP
CRANKSHAFT AS
430-2593 CRANKSHAFT AS
430-2593 CRANKSHAFT AS
S/N 1RK110-UP
PART OF 251-2303 CRANKSHAFT GP
CRANKSHAFT GP
251-2303 CRANKSHAFT GP
251-2303 CRANKSHAFT GP
S/N 1RK110-UP
CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
S/N 1RK1-UP
243-6718 KIT-CRANKSHAFT BEARING
243-6718 KIT-CRANKSHAFT BEARING
S/N 1RK1-UP
FIELD INSTALLATION
SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT -REAR
S/N 1RK1-UP
PART OF 251-2303, 4N-0741 CRANKSHAFT GP
FOR USE WITH CCW ROTATION
SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT -FRONT
S/N 1RK1-UP
PART OF 251-2303, 4N-0741 CRANKSHAFT GP
FOR USE WITH CW ROTATION
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
9N-0684 COVER GP-CYLINDER BLOCK
9N-0684 COVER GP-CYLINDER BLOCK
S/N 1RK1-UP
CYLINDER BLOCK AS
202-1257 CYLINDER BLOCK AS
202-1257 CYLINDER BLOCK AS
S/N 1RK106-UP
PART OF 463-3536 CYLINDER BLOCK AS, 152-7642 CYLINDER BLOCK GP
CYLINDER BLOCK AS
463-3536 CYLINDER BLOCK AS
463-3536 CYLINDER BLOCK AS
S/N 1RK106-UP
PART OF 202-1258 CYLINDER BLOCK GP
CYLINDER BLOCK GP
105-5420 CYLINDER BLOCK GP
105-5420 CYLINDER BLOCK GP
S/N 1RK1-46
CYLINDER BLOCK GP
108-3914 CYLINDER BLOCK GP
108-3914 CYLINDER BLOCK GP
S/N 1RK33-UP
PART OF 108-3916 CYLINDER BLOCK GP
CYLINDER BLOCK GP
108-3916 CYLINDER BLOCK GP
108-3916 CYLINDER BLOCK GP
S/N 1RK33-UP
FIELD INSTALLATION
CYLINDER BLOCK GP
110-2099 CYLINDER BLOCK GP
110-2099 CYLINDER BLOCK GP
S/N 1RK47-85
CYLINDER BLOCK GP
110-2099 CYLINDER BLOCK GP
110-2099 CYLINDER BLOCK GP
S/N 1RK86-105
CYLINDER BLOCK GP
110-2099 CYLINDER BLOCK GP
110-2099 CYLINDER BLOCK GP
S/N 1RK106-UP
CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
S/N 1RK33-UP
Type 1
FIELD INSTALLATION
CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
S/N 1RK33-UP
Type 2
FIELD INSTALLATION
CYLINDER BLOCK GP
152-7644 CYLINDER BLOCK GP
152-7644 CYLINDER BLOCK GP
S/N 1RK33-UP
PART OF 152-7642 CYLINDER BLOCK GP
CYLINDER BLOCK GP
152-7646 CYLINDER BLOCK GP
152-7646 CYLINDER BLOCK GP
S/N 1RK86-105
PART OF 110-2099 CYLINDER BLOCK GP
CYLINDER BLOCK GP
202-1258 CYLINDER BLOCK GP
202-1258 CYLINDER BLOCK GP
S/N 1RK106-UP
PART OF 110-2099 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4P-3720 CYLINDER BLOCK GP
4P-3720 CYLINDER BLOCK GP
S/N 1RK1-32
FIELD INSTALLATION
CYLINDER HEAD GP
226-1803 CONVERSION GP-CYLINDER HEAD
226-1803 CONVERSION GP-CYLINDER HEAD
S/N 1RK1-UP
FIELD INSTALLATION
CYLINDER HEAD AS
123-7334 CYLINDER HEAD AS
123-7334 CYLINDER HEAD AS
S/N 1RK33-83
PART OF 123-7335 CYLINDER HEAD GP
CYLINDER HEAD AS
151-1333 CYLINDER HEAD AS
151-1333 CYLINDER HEAD AS
S/N 1RK84-92
PART OF 123-7335 CYLINDER HEAD GP
CYLINDER HEAD AS
199-3207 CYLINDER HEAD AS
199-3207 CYLINDER HEAD AS
S/N 1RK93-UP
PART OF 199-3208 CYLINDER HEAD GP
CYLINDER HEAD AS
6I-3600 CYLINDER HEAD AS
6I-3600 CYLINDER HEAD AS
S/N 1RK1-32
PART OF 6I-3599 CYLINDER HEAD GP
CYLINDER HEAD GP
123-7335 CYLINDER HEAD GP
123-7335 CYLINDER HEAD GP
S/N 1RK33-83
PART OF 6I-3598 CYLINDER HEAD GP
CYLINDER HEAD GP
123-7335 CYLINDER HEAD GP
123-7335 CYLINDER HEAD GP
S/N 1RK84-92
PART OF 6I-3598 CYLINDER HEAD GP
CYLINDER HEAD GP
199-3208 CYLINDER HEAD GP
199-3208 CYLINDER HEAD GP
S/N 1RK93-UP
PART OF 6I-3598 CYLINDER HEAD GP
CYLINDER HEAD GP
223-6519 CYLINDER HEAD GP
223-6519 CYLINDER HEAD GP
S/N 1RK110-123
PART OF 223-6520 CYLINDER HEAD GP
CYLINDER HEAD GP
223-6520 CYLINDER HEAD GP
223-6520 CYLINDER HEAD GP
S/N 1RK110-123
CYLINDER HEAD GP
223-6520 CYLINDER HEAD GP
223-6520 CYLINDER HEAD GP
S/N 1RK124-UP
Type 1
CYLINDER HEAD GP
223-6520 CYLINDER HEAD GP
223-6520 CYLINDER HEAD GP
S/N 1RK124-UP
Type 2
CYLINDER HEAD GP
327-6910 CYLINDER HEAD GP
327-6910 CYLINDER HEAD GP
S/N 1RK124-UP
PART OF 223-6520 CYLINDER HEAD GP
CYLINDER HEAD GP
364-3477 CYLINDER HEAD GP
364-3477 CYLINDER HEAD GP
S/N 1RK124-UP
PART OF 223-6520 CYLINDER HEAD GP
CYLINDER HEAD GP
6I-3598 CYLINDER HEAD GP
6I-3598 CYLINDER HEAD GP
S/N 1RK1-32
CYLINDER HEAD GP
6I-3598 CYLINDER HEAD GP
6I-3598 CYLINDER HEAD GP
S/N 1RK33-92
CYLINDER HEAD GP
6I-3598 CYLINDER HEAD GP
6I-3598 CYLINDER HEAD GP
S/N 1RK93-109
CYLINDER HEAD GP
6I-3599 CYLINDER HEAD GP
6I-3599 CYLINDER HEAD GP
S/N 1RK1-32
PART OF 6I-3598 CYLINDER HEAD GP
DAMPER GP
DAMPER & PULLEY GP
494-6415 DAMPER & PULLEY GP
494-6415 DAMPER & PULLEY GP
S/N 1RK1-UP
AN ATTACHMENT
DAMPER & PULLEY GP
4P-5894 DAMPER & PULLEY GP
4P-5894 DAMPER & PULLEY GP
S/N 1RK1-UP
4-GROOVE PULLEY
DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
7C-1052 DRIVE GP-ACCESSORY
7C-1052 DRIVE GP-ACCESSORY
S/N 1RK1-UP
AN ATTACHMENT
DRIVE GP-ACCESSORY
8N-9653 DRIVE GP-ACCESSORY
8N-9653 DRIVE GP-ACCESSORY
S/N 1RK1-UP
DRIVE GP-AUXILIARY
DRIVE GP-AUXILIARY
1W-6411 DRIVE GP-AUXILIARY
1W-6411 DRIVE GP-AUXILIARY -FRONT, RH
S/N 1RK1-UP
CANNOT BE USED WITH GUARD GP-BELT (RADIATOR FAN)
AN ATTACHMENT
FLYWHEEL GP
FLYWHEEL GP
7W-8953 FLYWHEEL GP
7W-8953 FLYWHEEL GP
S/N 1RK1-UP
GEAR GP
GEAR GP-FRONT
8N-9246 GEAR GP-FRONT
8N-9246 GEAR GP-FRONT
S/N 1RK1-UP
HOUSING GP-FRONT
184-5143 HOUSING GP-FRONT
184-5143 HOUSING GP-FRONT
S/N 1RK1-UP
PART OF 184-5146, 191-9374 DRIVE GP-GOVERNOR
AN ATTACHMENT
HOUSING GP-FRONT
1W-1468 HOUSING GP-FRONT
1W-1468 HOUSING GP-FRONT
S/N 1RK1-UP
HOUSING GP-FRONT
7W-2093 HOUSING GP-FRONT
7W-2093 HOUSING GP-FRONT
S/N 1RK1-UP
PART OF 179-9581, 191-9373 DRIVE GP-GOVERNOR, 7W-2096 DRIVE GP-GOVERNOR & MAGNETO
ALSO AN ATTACHMENT
GUARD GP-BELT
GUARD GP-BELT
121-4373 GUARD GP-BELT
121-4373 GUARD GP-BELT
S/N 1RK1-UP
AN ATTACHMENT
GUARD GP-BELT
124-5279 GUARD GP-BELT
124-5279 GUARD GP-BELT
S/N 1RK1-UP
AN ATTACHMENT
HOUSING GP-FLYWHEEL
COVER GP-FLYWHEEL HOUSING
7W-8951 COVER GP-FLYWHEEL HOUSING
7W-8951 COVER GP-FLYWHEEL HOUSING
S/N 1RK1-UP
HOUSING GP-FLYWHEEL
110-2098 HOUSING GP-FLYWHEEL
110-2098 HOUSING GP-FLYWHEEL
S/N 1RK47-UP
HOUSING GP-FLYWHEEL
7W-8955 HOUSING GP-FLYWHEEL
7W-8955 HOUSING GP-FLYWHEEL
S/N 1RK1-46
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
189-5783 COVER GP-FRONT HOUSING
189-5783 COVER GP-FRONT HOUSING
S/N 1RK99-UP
COVER GP-FRONT HOUSING
1W-1395 COVER GP-FRONT HOUSING
1W-1395 COVER GP-FRONT HOUSING
S/N 1RK1-98
FASTENER GP-FRONT HOUSING
284-8935 FASTENER GP-FRONT HOUSING
284-8935 FASTENER GP-FRONT HOUSING
S/N 1RK113-UP
FASTENER GP-FRONT HOUSING
4N-6006 FASTENER GP-FRONT HOUSING
4N-6006 FASTENER GP-FRONT HOUSING
S/N 1RK1-112
GEAR GP-FRONT
8N-9246 GEAR GP-FRONT
8N-9246 GEAR GP-FRONT
S/N 1RK1-UP
HOUSING GP-FRONT
184-5143 HOUSING GP-FRONT
184-5143 HOUSING GP-FRONT
S/N 1RK1-UP
PART OF 184-5146, 191-9374 DRIVE GP-GOVERNOR
AN ATTACHMENT
HOUSING GP-FRONT
1W-1468 HOUSING GP-FRONT
1W-1468 HOUSING GP-FRONT
S/N 1RK1-UP
HOUSING GP-FRONT
7W-2093 HOUSING GP-FRONT
7W-2093 HOUSING GP-FRONT
S/N 1RK1-UP
PART OF 179-9581, 191-9373 DRIVE GP-GOVERNOR, 7W-2096 DRIVE GP-GOVERNOR & MAGNETO
ALSO AN ATTACHMENT
LIFTING GP-ENGINE
COVER GP-ENGINE LIFTING EYE
3N-8594 COVER GP-ENGINE LIFTING EYE
3N-8594 COVER GP-ENGINE LIFTING EYE
S/N 1RK1-UP
PART OF 5N-2377, 9Y-1862, 9Y-5799 BASE GP-ENGINE & GENERATOR
AN ATTACHMENT
LIFTING GP-ENGINE
4N-1331 LIFTING GP-ENGINE
4N-1331 LIFTING GP-ENGINE
S/N 1RK1-UP
MOUNTING GP-ALTERNATOR
MOUNTING GP-ALTERNATOR
7W-1340 MOUNTING GP-ALTERNATOR
7W-1340 MOUNTING GP-ALTERNATOR
S/N 1RK1-UP
CANNOT BE USED WITH 75 AMPERE ALTERNATOR
AN ATTACHMENT
MOUNTING GP-ENGINE
SUPPORT GP-ENGINE
8N-2020 SUPPORT GP-ENGINE
8N-2020 SUPPORT GP-ENGINE -FRONT, WIDE
S/N 1RK1-UP
SUPPORT GP-ENGINE
9Y-3058 SUPPORT GP-ENGINE
9Y-3058 SUPPORT GP-ENGINE -REAR
S/N 1RK1-UP
AN ATTACHMENT
PAN GP-OIL
PAN GP-OIL
4W-1873 PAN GP-OIL
4W-1873 PAN GP-OIL -ENGINE
S/N 1RK1-UP
HIGH CAPACITY
PISTON & ROD GP
PISTON & ROD GP
105-5426 PISTON & ROD GP
105-5426 PISTON & ROD GP
S/N 1RK1-61
PISTON & ROD GP
135-4620 PISTON & ROD GP
135-4620 PISTON & ROD GP
S/N 1RK62-UP
PULLEY GP
DAMPER & PULLEY GP
494-6415 DAMPER & PULLEY GP
494-6415 DAMPER & PULLEY GP
S/N 1RK1-UP
AN ATTACHMENT
DAMPER & PULLEY GP
4P-5894 DAMPER & PULLEY GP
4P-5894 DAMPER & PULLEY GP
S/N 1RK1-UP
4-GROOVE PULLEY
SHAFT GP-STUB
SHAFT GP-STUB
165-8344 SHAFT GP-STUB
165-8344 SHAFT GP-STUB
S/N 1RK1-UP
AN ATTACHMENT
SHAFT GP-STUB
5N-2010 SHAFT GP-STUB
5N-2010 SHAFT GP-STUB
S/N 1RK1-UP
CANNOT BE USED WITH REAR ENCLOSED CLUTCH
AN ATTACHMENT
SERPENTINE/V-BELTS
GUARD GP-BELT
121-4373 GUARD GP-BELT
121-4373 GUARD GP-BELT
S/N 1RK1-UP
AN ATTACHMENT
GUARD GP-BELT
124-5279 GUARD GP-BELT
124-5279 GUARD GP-BELT
S/N 1RK1-UP
AN ATTACHMENT
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
7W-8956 COVER GP-VALVE MECHANISM
7W-8956 COVER GP-VALVE MECHANISM
S/N 1RK1-UP
ROCKER ARM GP
4N-1045 ROCKER ARM GP
4N-1045 ROCKER ARM GP
S/N 1RK1-32
PART OF 6I-0246 VALVE MECHANISM GP
ROCKER ARM GP
4P-5258 ROCKER ARM GP
4P-5258 ROCKER ARM GP
S/N 1RK33-UP
PART OF 6I-2077 VALVE MECHANISM GP
VALVE MECHANISM GP
6I-0246 VALVE MECHANISM GP
6I-0246 VALVE MECHANISM GP
S/N 1RK1-32
VALVE MECHANISM GP
6I-2077 VALVE MECHANISM GP
6I-2077 VALVE MECHANISM GP
S/N 1RK33-UP
Type 1
VALVE MECHANISM GP
6I-2077 VALVE MECHANISM GP
6I-2077 VALVE MECHANISM GP
S/N 1RK33-UP
Type 2
VALVE MECHANISM GP
6I-2077 VALVE MECHANISM GP
6I-2077 VALVE MECHANISM GP
S/N 1RK33-UP
Type 3
ENGINE OVERHAUL KIT
491-1916 KIT-ENGINE OVERHAUL
491-1916 KIT-ENGINE OVERHAUL
S/N 1RK1-UP
OIL COOLER AND LINES GASKET KIT
FIELD INSTALLATION

Information:

(For parts list, see above)

Truck Engine News
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
Engine News
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Service Magazine
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
Specifications
Belt Tension Chart
G3406 Engines
Service Magazine
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Engine News
New 8T2998 Lubricant Available
1986/03/01
Remanufactured Camshafts And Cam Kits Available For Parts Service
1990/12/01
New Camshafts Provide Increased Power, Reduced Fuel Consumption, Reduced Exhaust Temperature, And Reduced Emissions
1991/09/01
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure
1993/09/01
New Camshaft Design
1993/09/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Cat<SUP>&reg;</SUP> Reman Has Added Valve Lifters, Rocker Arms, and Camshafts for Certain Engines and Generator Set Engines {1123, 1130, 1209, 1210}
2014/09/05
Specifications
Camshaft
G3406 Engines
Camshaft
G3406 Engines
Camshaft Bearings
G3406 Engines
Camshaft Bearing Position
G3406 Engines
Systems Operation
Camshaft
G3406 Engine
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
New Camshafts Provide Increased Power, Reduced Fuel Consumption, Reduced Exhaust Temperature, And Reduced Emissions{1210}
1991/09/09
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
New Camshaft Design{1210}
1993/09/27
Operation and Maintenance Manual
Power Take-Off Clutch - Check
G3406 Engine
Driven Equipment - Check
G3406 Engine
Disassembly and Assembly
Coupling - Install
SR4B Generators
Coupling - Remove
SR4B Generators
Coupling - Remove
SR4 Generator with VR3 or VR4 Voltage Regulator
Service Magazine
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Truck Engine News
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
Engine News
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available
1980/09/10
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Crankshaft Failures
1983/11/30
Remanufactured Undersize Crankshafts Are Available
1984/04/11
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
Crankshaft Seal Usage On 3400 Series Engines
1986/01/01
3400 Engine Major Component Performance Guide Available
1987/07/01
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups
1990/12/01
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts
1991/01/01
Oil Holes In Crankshaft Main And Rod Journals
1992/10/01
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/09/01
Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly{1205}
1997/01/22
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
A New Type of Main Bearing is Now Used {1203}
2007/09/17
Use Reuse and Salvage Guidelines for Measurements of Crankshafts which Includes the Crankshaft of the Remanufactured Engine with the Serial Number Prefix 1WW {1202}
2006/10/09
A New Type of Main Bearing is Now Used {1202, 1203}
2008/07/14
Procedure for Crankshafts that will not Rotate after Installation during a Rebuild {1202}
2008/09/15
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
G3406 Engine
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Technical Information Bulletin
NEW CRANKSHAFT SEALS FOR THE FRONT AND FOR THE REAR ARE NOW IN PRODUCTION BUT ARE NOT AVAILIBLE TO BE OREDERD AT THIS TIME
NEW CRANKSHAFT SEALS FOR THE FRONT AND FOR THE REAR ARE NOW IN PRODUCTION BUT ARE NOT AVAILIBLE TO BE OREDERD AT THIS TIME
Specifications
Connecting Rod and Main Bearing Journals
G3406 Engines
Crankshaft
G3406 Engines
Systems Operation
Crankshaft
G3406 Engine
Testing and Adjusting
Crankshaft Position for Valve Lash Setting
G3406 Engine
Service Magazine
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Connecting Rod Bearing Eliminates The Need For Mid-Life Connecting Rod Bearing Roll-In{1219,1202}
1992/08/31
Oil Holes In Crankshaft Main And Rod Journals{1202}
1992/11/09
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Truck Engine News
The Cylinder Liners Have a New Appearance {1216}
2005/03/01
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
New Liner Seat Insert Available
1983/08/17
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
New Cylinder Liner Available
1986/02/01
3400 Engine Major Component Performance Guide Available
1987/07/01
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups
1990/12/01
Thinner Spacer Plates Available For Parts Service
1992/06/01
Connecting Rod Bearing Eliminates The Need For Mid-Life Connecting Rod Bearing Roll-In
1992/08/01
New Liner Seat Inserts Available
1992/11/01
Cylinder Pack Puller Groups Improved
1993/01/01
Damper Requirements For Remanufactured Short Block
1993/08/01
Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/12/01
New Cylinder Liner Seal Resists Deterioration {1216}
1995/03/01
New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}
1996/02/16
New Piston Cooling Jet Tube Assembly Provides Increased Piston Clearance{1331}
1998/03/01
New Piston Cooling Jet Tube Assemblies Provide Increased Piston Clearance For Engines With Gallery Cooled Pistons{1331}
1998/12/01
Be Sure To Use The Correct Piston Cooling Jet Tube Assembly With Gallery Cooled Pistons {1331}
1999/10/01
Modification To Holder To Machine Counterbore On Cylinder Block
1977/03/15
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Be Sure To Use The Correct Piston Cooling Jet Tube Assembly With Gallery Cooled Pistons {1331}
1999/12/01
A New Piston Cooling Jet Assembly Has Been Released {1331}
2006/08/14
Operation and Maintenance Manual
Cylinder Pressure - Test/Record
G3406 Engine
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Technical Information Bulletin
Liner Flange Breakage
Liner Flange Breakage
Specifications
Cylinder Liner
G3406 Engines
Cylinder Block
G3406 Engines
Connecting Rod
G3406 Engines
Piston and Rings
G3406 Engines
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Systems Operation
Cylinder Block, Liners and Heads
G3406 Engine
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Testing and Adjusting
Cylinder Liner Projection
G3406 Engine
Cylinder Block
G3406 Engine
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Liner Seat Insert Available{1217}
1983/08/15
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
New Cylinder Block Groups Used{1201}
1984/10/01
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
New Cylinder Liner Available{1201}
1986/02/10
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Thinner Spacer Plates Available For Parts Service{1221}
1992/06/29
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31
New Liner Seat Inserts Available{1217}
1992/11/09
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
Engine News
Engine Valve Stem &quot;Use Again&quot; Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
New High Alloy Material Is Used In Cylinder Head Assemblies
1984/10/24
A New Book &quot;Analyzing Diesel And Natural Gas Engine Valve Failures&quot; Is Available
1985/03/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips
1989/08/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
New Specification For Exhaust Valve Clearance
1991/05/01
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/01
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/18
Longer Exhaust Manifold Mounting Studs Used In Cylinder Head Group{1100}
1994/11/01
Improved Cylinder Head Group Components And Valve Mechanism Group Components Provide Increased Service Life{1100,1102,1103,1104,1105}
1995/08/01
New And Reconditioned Valve Projection Specifications{1105}
1995/09/01
New Inlet Valve Seat Inserts Provide Improved Serviceability And Reliability {1103,1100}
1996/08/19
New Valve Guides Improve Wear Resistance {1104}
1998/01/20
Use 154-9521 Spark Plug Seat Cleaner To Remove Debris From Gasket Seat And Cylinder Heads{1100,0703}
1999/01/01
Recommended Repairs After Cylinder Head Gasket Failure {1101}
1999/11/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
A New Cylinder Head Group Provides Increased Valve Life {1100, 1103}
2001/03/01
New Cylinder Head Group {1100}
2004/07/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Improved O-Ring Seal for the Spark Plug Adapter {1100, 1555}
2006/03/13
A Floating Valve Bridge and New Cylinder Head Groups Are Used for Certain CG137 and G3400 Engines {1100, 1102, 1121, 1123, 1209}
2015/09/28
Operation and Maintenance Manual
Valve Stem Projection - Measure/Record
G3406 Engine
Special Instruction
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Installation Procedure for the 223-6519 Cylinder Head Group or the 223-6521 Cylinder Head Group {1101, 1124}
Installation Procedure for the 223-6519 Cylinder Head Group or the 223-6521 Cylinder Head Group {1101, 1124}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS ON CERTAIN G3406 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS ON CERTAIN G3406 ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Lubricant For Gas Engines
Lubricant For Gas Engines
Specifications
Cylinder Head
G3406 Engines
Cylinder Head Valves
G3406 Engines
Cylinder Head Valves
G3406 Engines
Cylinder Head
G3406 Engines
Cylinder Head Valves
G3406 Engines
Tool Operating Manual
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS ON CERTAIN G3406 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS ON CERTAIN G3406 ENGINES
Service Letter-Asia
Systems Operation
Cylinder Block, Liners and Heads
G3406 Engine
Valve System Components
G3406 Engine
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
CHANGE OF SERVICE FOR G3406 CYLINDER HEADS
CHANGE OF SERVICE FOR G3406 CYLINDER HEADS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDER HEADS FOR ALL G3400 APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDER HEADS FOR ALL G3400 APPLICATIONS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS ON CERTAIN G3406 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS ON CERTAIN G3406 ENGINES
Testing and Adjusting
Valve Lash and Valve Bridge Adjustment
G3406 Engine
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New Instruction Card Available For 6V87 Valve Stem Gauge{0653}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
New Liner Seat Insert Available{1217}
1983/08/15
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
New High Alloy Material Is Used In Cylinder Head Assemblies{1101}
1984/10/15
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Specification For Exhaust Valve Clearance{1123,1121,1105}
1991/05/13
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/04
Use 154-9521 Spark Plug Seat Cleaner To Remove Debris From Gasket Seat And Cylinder Heads {1100,0703}
1999/03/08
Engine News
Damper Requirements For Remanufactured Short Block
1993/08/01
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/09/01
Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly{1205}
1997/01/22
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
G3406 Engine
Specifications
Vibration Damper and Pulley
G3406 Engines
Testing and Adjusting
Vibration Damper - Check
G3406 Engine
Service Magazine
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
Engine News
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Specifications
Accessory Drive
G3406 Engines
Accessory Drive
G3406 Engines
Auxiliary Drive
G3406 Engines
Service Magazine
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Engine News
Improved Water Pump Groups Available{1361}
1996/11/01
Special Instruction
Using A 4P2152, 1025941, 0R2856 Or 0R3790 Water Pump With A 4P2383 Inlet Adapter{1361, 1364}
Using A 4P2152, 1025941, 0R2856 Or 0R3790 Water Pump With A 4P2383 Inlet Adapter{1361, 1364}
Using A 9Y3778 Water Pump Impeller With A 9Y5652 Inlet Adapter{1361, 1364}
Using A 9Y3778 Water Pump Impeller With A 9Y5652 Inlet Adapter{1361, 1364}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
New, Corrosion Resistant Water Pump Shaft Available{1389,1361}
1985/08/05
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}
1997/01/13
Special Instruction
Using A 4P2152, 1025941, 0R2856 Or 0R3790 Water Pump With A 4P2383 Inlet Adapter{1361, 1364}
Using A 4P2152, 1025941, 0R2856 Or 0R3790 Water Pump With A 4P2383 Inlet Adapter{1361, 1364}
Using A 9Y3778 Water Pump Impeller With A 9Y5652 Inlet Adapter{1361, 1364}
Using A 9Y3778 Water Pump Impeller With A 9Y5652 Inlet Adapter{1361, 1364}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
New, Corrosion Resistant Water Pump Shaft Available{1389,1361}
1985/08/05
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}
1997/01/13
Engine News
Proper Storage Procedures Are Available For Commercial Engines {1000}
Proper Storage Procedures Are Available For Commercial Engines {1000}
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Oil and Your Engine {1000}
Oil and Your Engine {1000}
General Troubleshooting Guidelines For Nitrite Levels For Certain Gas Engines {0769, 1000, 1352, 1395}
General Troubleshooting Guidelines For Nitrite Levels For Certain Gas Engines {0769, 1000, 1352, 1395}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine News
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket
1992/09/01
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Special Instruction
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Specifications
Flywheel
G3406 Engines
Flywheel Housing
G3406 Engines
Testing and Adjusting
Flywheel - Inspect
G3406 Engine
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Engine News
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Special Instruction
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Specifications
Gear Group (Front)
G3406 Engines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Engine News
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket
1992/09/01
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
New Flywheel Housing Gasket For 3406 Engines {1157}
1999/03/01
Specifications
Flywheel Housing
G3406 Engines
Testing and Adjusting
Flywheel Housing - Inspect
G3406 Engine
Service Magazine
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Engine News
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Special Instruction
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Specifications
Housing (Front)
G3406 Engines
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available
1980/09/10
Crankshaft Seal Usage On 3400 Series Engines
1986/01/01
New Camshafts Provide Increased Power, Reduced Fuel Consumption, Reduced Exhaust Temperature, And Reduced Emissions
1991/09/01
Modification To Holder To Machine Counterbore On Cylinder Block
1977/03/15
New Piston Pin Bearing Used In Connecting Rod Assembly
1977/04/22
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Tolerance Added To Valve Clearance Specifications
1978/01/18
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Operation and Maintenance Manual
Engine Mounts - Inspect
G3406 Engine
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Magazine
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings{1214,1225,1215,1218}
1983/09/12
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
New Cylinder Block Groups Used{1201}
1984/10/01
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16
New Cylinder Liner Available{1201}
1986/02/10
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Engine Coolant Can Be Recycled{1395}
1989/11/13
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
New Drain Plug And O-ring Seal Used In Oil Pan Groups{1302,7553,7555}
1991/05/06
New Oil Drain Assembly Used; Be Sure To Correctly Tighten Drain Plugs, Port Plugs, And Pipe Plugs In Oil Pans{1302}
1991/06/03
New Piston Pin Retainer Used{1225}
1991/10/14
Thinner Spacer Plates Available For Parts Service{1221}
1992/06/29
Oil Holes In Crankshaft Main And Rod Journals{1202}
1992/11/09
New Liner Seat Inserts Available{1217}
1992/11/09
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
Operation and Maintenance Manual
Engine Mounts - Inspect
G3406 Engine
Engine News
New Drain Plug And O-ring Seal Used In Oil Pan Groups
1991/05/01
New Oil Drain Assembly Used; Be Sure To Correctly Tighten Drain Plugs, Port Plugs, And Pipe Plugs In Oil Pans
1991/06/01
New Engine Oil Reservoir Groups Are Now Available {1308}
1998/11/01
An Improved Three-Piece Oil Pan Gasket is Now Used {1302, 7555}
2008/01/07
Special Instruction
Installation Of The Auxiliary Engine Oil Reservoir Group{1302}
Installation Of The Auxiliary Engine Oil Reservoir Group{1302}
Specifications
Engine Oil Pan
G3406 Engines
Engine Oil Pan
G3406 Engines
Engine Oil Pan
G3406 Engines
Service Magazine
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Auxiliary Oil Filter Groups Used To Increase Oil Capacity And Extend Oil Change Interval To 750 Hours{1318,7534}
1990/12/24
New Drain Plug And O-ring Seal Used In Oil Pan Groups{1302,7553,7555}
1991/05/06
New Oil Drain Assembly Used; Be Sure To Correctly Tighten Drain Plugs, Port Plugs, And Pipe Plugs In Oil Pans{1302}
1991/06/03
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Engine News
3400 Engine Major Component Performance Guide Available
1987/07/01
Procedure For Cleaning Engine Bolts {1000}
2002/03/01
Service Magazine
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/11/10
Pistons With Thicker Top Rings Must Be Used In Correct Applications
1983/04/27
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings
1983/09/14
Increase Piston Reuse With Keystone Piston Ring Gauge Group
1986/07/01
Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/12/01
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method
1987/06/01
3400 Engine Major Component Performance Guide Available
1987/07/01
Testing Connecting Rod Eye Bushings When Overhauling Engines
1987/07/01
New Piston Pin Retainer Used
1991/10/01
Connecting Rod Bearing Eliminates The Need For Mid-Life Connecting Rod Bearing Roll-In
1992/08/01
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/11/01
Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/12/01
New Piston Rings Extend Valve Service Life {1215}
1996/09/23
New Piston Cooling Jet Tube Assembly Provides Increased Piston Clearance{1331}
1998/03/01
New Piston Pin Bearing Used In Connecting Rod Assembly
1977/04/22
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Be Sure To Use The Correct Piston Cooling Jet Tube Assembly With Gallery Cooled Pistons {1331}
1999/12/01
A New Piston Cooling Jet Assembly Has Been Released {1331}
2006/08/14
A New Connecting Rod Bearing is Available for Certain Commercial Engines {1219, 1225}
2009/01/05
Special Instruction
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Technical Information Bulletin
Connecting Rod Bearings
Connecting Rod Bearings
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Specifications
Connecting Rod
G3406 Engines
Piston and Rings
G3406 Engines
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Systems Operation
Pistons, Rings and Connecting Rods
G3406 Engine
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDER PACKS FOR CERTAIN 3400, 3500, C-15, AND C18 ENGINE APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDER PACKS FOR CERTAIN 3400, 3500, C-15, AND C18 ENGINE APPLICATIONS
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Testing and Adjusting
Compression
G3406 Engine
Service Magazine
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Pistons With Thicker Top Rings Must Be Used In Correct Applications {1214,1215}
1983/04/18
Reuse Of Engine Bearings{1230}
1983/05/16
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings{1214,1225,1215,1218}
1983/09/12
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Piston Pin Retainer Used{1225}
1991/10/14
Connecting Rod Bearing Eliminates The Need For Mid-Life Connecting Rod Bearing Roll-In{1219,1202}
1992/08/31
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/10/31
Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Operation and Maintenance Manual
Power Take-Off Clutch - Check
G3406 Engine
Engine News
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut
1988/01/01
Damper Requirements For Remanufactured Short Block
1993/08/01
Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly{1205}
1997/01/22
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
G3406 Engine
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Specifications
Vibration Damper and Pulley
G3406 Engines
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
Engine News
Different Housings are Used on 3400 Remanufactured Engines {1304}
Different Housings are Used on 3400 Remanufactured Engines {1304}
Specifications
Stub Shaft (Rear)
G3406 Engines
Service Magazine
New Drain Plug And O-ring Seal Used In Oil Pan Groups{1302,7553,7555}
1991/05/06
Engine News
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available
1980/09/10
Separate Valve Stem Gauges Available
1982/08/25
New Instruction Card Available For 6V87 Valve Stem Gauge
1982/09/22
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New Engine Timing Indicator Group Available
1986/07/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group
1987/07/01
Use 154-9521 Spark Plug Seat Cleaner To Remove Debris From Gasket Seat And Cylinder Heads{1100,0703}
1999/01/01
The New 213-9285 Valve Recession Tool Kit Is Available {0703}
2002/11/01
Special Instruction
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Service Magazine
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Four New Contact Points Added To 5P6524 Engine Timing Indicator Group{0653}
1978/08/07
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Use 154-9521 Spark Plug Seat Cleaner To Remove Debris From Gasket Seat And Cylinder Heads {1100,0703}
1999/03/08
Use 165-4638 Guide To Install Exhaust Manifold {1059,0701,0702}
1999/08/30
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
G3406 Engine
Specifications
Belt Tension Chart
G3406 Engines
Engine News
Engine Valve Stem &quot;Use Again&quot; Specifications
1983/03/16
New High Alloy Material Is Used In Cylinder Head Assemblies
1984/10/24
A New Book &quot;Analyzing Diesel And Natural Gas Engine Valve Failures&quot; Is Available
1985/03/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips
1989/08/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
New Specification For Exhaust Valve Clearance
1991/05/01
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/01
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/18
New Valve Lifter Assembly Includes A Roller Pin With Improved Corrosion Resistance {1209}
1995/05/01
Improved Cylinder Head Group Components And Valve Mechanism Group Components Provide Increased Service Life{1100,1102,1103,1104,1105}
1995/08/01
New And Reconditioned Valve Projection Specifications{1105}
1995/09/01
New Valve Guides Improve Wear Resistance {1104}
1998/01/20
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
A New Guide Spring for the Camshaft Lifter is Now Used {1102}
2008/03/17
A Floating Valve Bridge and New Cylinder Head Groups Are Used for Certain CG137 and G3400 Engines {1100, 1102, 1121, 1123, 1209}
2015/09/28
Cat<SUP>&reg;</SUP> Reman Has Added Valve Lifters, Rocker Arms, and Camshafts for Certain Engines and Generator Set Engines {1123, 1130, 1209, 1210}
2014/09/05
Operation and Maintenance Manual
Engine Valve Rotators - Inspect
G3406 Engine
Engine Valve Lash - Check
G3406 Engine
Special Instruction
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Technical Information Bulletin
Failures of the 305-6843 Guide Spring on Certain Engines{1102, 1121, 1123, 1209}
Failures of the 305-6843 Guide Spring on Certain Engines{1102, 1121, 1123, 1209}
3406C 7E-0329 Valve Cover Base Quality Containment {1107, 1120}
3406C 7E-0329 Valve Cover Base Quality Containment {1107, 1120}
Specifications
Valve Cover
G3406 Engines
Valve Mechanism
G3406 Engines
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Finding the Top Center Position for the No. 1 Piston
G3406 Engine
Valve Lash and Valve Bridge Adjustment
G3406 Engine
Crankshaft Position for Valve Lash Setting
G3406 Engine
Service Magazine
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Specification For Exhaust Valve Clearance{1123,1121,1105}
1991/05/13
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/04
Engine News
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Service Magazine
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23

Truck sale:

Caterpillar G3406, Construction
90,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3406, Construction
99,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3406, Construction
90,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3406, Construction
90,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3406, Construction
90,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.