AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

152-7646 CYLINDER BLOCK GP S/N 1RK86-105 PART OF 110-2099 CYLINDER BLOCK GP G3406 GAS ENGINE


BASIC ENGINE
CYLINDER BLOCK GP
CYLINDER HEAD GP

GAS ENGINE G3406 GAS ENGINE 1RK
 G3406 Engine 1RK00001-UP SEBP1891 G3406 1RK   (1990)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
CYLINDER BLOCK GP
152-7644 CYLINDER BLOCK GP
CYLINDER BLOCK GP
152-7646 CYLINDER BLOCK GP
CYLINDER BLOCK GP
202-1258 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4P-3720 CYLINDER BLOCK GP
 

#SEBP18910030
 

152-7646: CYLINDER BLOCK GP

152-7646 CYLINDER BLOCK GP
S/N 1RK86-105
PART OF 110-2099 CYLINDER BLOCK GP
i00734532 SEBP1891
1527646 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 197-9322 [6] LINER-CYLINDER BLOCK  
2. 9L-5854 [6] BAND-FILLER (130.2-MM ID)  
3. 110-2220 [6] SEAL-LINER  
4. 3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
5. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
6. 4N-5857 [7] CAP-CRANKSHAFT BEARING (MAIN BEARING)  
7. 142-7072 [6] SEAL-LINER  
8. 142-6217 [6] SEAL-O-RING  
10. 4N-0685 [6] BUSHING (1-IN WIDE)  
11. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
 

#SEBP18910031
 

202-1258: CYLINDER BLOCK GP

202-1258 CYLINDER BLOCK GP
S/N 1RK106-UP
PART OF 110-2099 CYLINDER BLOCK GP
i01538305 SEBP1891
2021258 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-5854 [6] BAND-FILLER (130.2-MM ID)  
2. 197-9322 [6] LINER-CYLINDER BLOCK  
3. 463-3536 Y [1] CYLINDER BLOCK AS  
4. 110-2220 [6] SEAL-LINER  
5. 142-6217 [6] SEAL-O-RING  
6. 142-7072 [6] SEAL-LINER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP18910032
 

4P-3720: CYLINDER BLOCK GP

4P-3720 CYLINDER BLOCK GP
S/N 1RK1-32
FIELD INSTALLATION
i00147180 SEBP1891
4P3720 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4K-1388 [1] SEAL-O-RING  
2. 9F-2247 [3] PLUG-PIPE (1/8-27-THD)  
3. 7M-7410 [1] PLUG-PIPE  
4. 9S-8009 [3] PLUG-O-RING  
5. 7H-3171 [3] PLUG-PIPE  
6. 4P-2098 [1] CYLINDER BLOCK AS  
  4N-5857 [1] CAP-CRANKSHAFT BEARING  
  3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
  9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
7. 5M-6214 [1] PLUG (1/8-27 PTF)  
8. 3J-5389 [1] PLUG (EXTERNAL)  
9. 030-7571 [4] BOLT (3/8-16X1-IN)  
10. 4W-8585 [1] COVER  
11. 7W-6081 [1] GASKET  
12. 2M-6471 [2] PLUG-CUP  
13. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
14. 4N-0685 [6] BUSHING (1-IN WIDE)  
15. 3J-5390 [6] PLUG (3/8-18-THD)  
16. 2M-9780 [2] SEAL-O-RING  
17. 8S-9094 [1] PLUG-ORIFICE  
18. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
 

#SEBP18910033
 

123-7334: CYLINDER HEAD AS

123-7334 CYLINDER HEAD AS
S/N 1RK33-83
PART OF 123-7335 CYLINDER HEAD GP
i00515027 SEBP1891
1237334 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 122-7352 [12] INSERT-VALVE SEAT (INLET)(INLET)  
  133-9745 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  133-9746 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  133-9747 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  133-9748 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
2. 6I-4014 [12] INSERT-VALVE SEAT (EXHAUST)(EXHAUST)  
  6I-4015 AB INSERT-VALVE SEAT (0.13-MM OS, EXHAUST)  
  6I-4016 AB INSERT-VALVE SEAT (0.25-MM OS, EXHAUST)  
  6I-4017 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  6I-4018 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
3. 2M-6471 [1] PLUG-CUP  
4. 3B-0623 [10] PLUG-CUP  
5. 3B-0645 [12] PLUG-CUP (32.08-MM OD)  
6. 123-3984 [12] GUIDE-VALVE (INLET)  
6A. 123-3984 [12] GUIDE-VALVE (EXHAUST)  
7. 2N-5775 [12] DOWEL  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP18910034
 

151-1333: CYLINDER HEAD AS

151-1333 CYLINDER HEAD AS
S/N 1RK84-92
PART OF 123-7335 CYLINDER HEAD GP
i00773309 SEBP1891
1511333 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2N-5775 [12] DOWEL  
2. 122-7352 [12] INSERT-VALVE SEAT (INLET)  
  133-9745 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  133-9746 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  133-9747 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  133-9748 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
3. 6I-4014 [12] INSERT-VALVE SEAT (EXHAUST)  
  6I-4015 AB INSERT-VALVE SEAT (0.13-MM OS, EXHAUST)  
  6I-4016 AB INSERT-VALVE SEAT (0.25-MM OS, EXHAUST)  
  6I-4017 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  6I-4018 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
4. 2M-6471 [1] PLUG-CUP  
5. 3B-0623 [10] PLUG-CUP  
6. 3B-0645 [12] PLUG-CUP (32.08-MM OD)  
7. 151-6235 [12] GUIDE-VALVE (INLET)  
7A. 151-6235 [12] GUIDE-VALVE (EXHAUST)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP18910035
 

199-3207: CYLINDER HEAD AS

199-3207 CYLINDER HEAD AS
S/N 1RK93-UP
PART OF 199-3208 CYLINDER HEAD GP
i01481524 SEBP1891
1993207 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-6471 [1] PLUG-CUP  
2. 2N-5775 [12] DOWEL  
3. 3B-0623 [10] PLUG-CUP  
4. 3B-0645 [12] PLUG-CUP (32.08-MM OD)  
6. 122-7352 [12] INSERT-VALVE SEAT (INLET)  
  133-9745 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  133-9746 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  133-9747 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  133-9748 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
7. 151-6235 [24] GUIDE-VALVE  
8. 198-6529 [12] INSERT-VALVE SEAT (EXHAUST)  
  200-4280 AB INSERT-VALVE SEAT (0.13-MM OS, EXHAUST)  
  200-4281 AB INSERT-VALVE SEAT (0.25-MM OS, EXHAUST)  
  200-4282 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  200-4283 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP18910036
 

6I-3600: CYLINDER HEAD AS

6I-3600 CYLINDER HEAD AS
S/N 1RK1-32
PART OF 6I-3599 CYLINDER HEAD GP
i00397416 SEBP1891
6I3600 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-4014 [12] INSERT-VALVE SEAT (EXHAUST)  
  6I-4015 AB INSERT-VALVE SEAT (0.13-MM OS, EXHAUST)  
  6I-4016 AB INSERT-VALVE SEAT (0.25-MM OS, EXHAUST)  
  6I-4017 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  6I-4018 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
2. 6I-4019 [12] INSERT-VALVE SEAT (INTAKE)  
  6I-4020 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  6I-4021 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  6I-4022 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  6I-4023 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
3. 2M-6471 [1] PLUG-CUP  
4. 3B-0623 [10] PLUG-CUP  
5. 3B-0645 [12] PLUG-CUP (32.08-MM OD)  
6. 7E-3413 [24] GUIDE-VALVE  
7. 2N-5775 [12] DOWEL  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP18910037
 

123-7335: CYLINDER HEAD GP

123-7335 CYLINDER HEAD GP
S/N 1RK33-83
PART OF 6I-3598 CYLINDER HEAD GP
i00515029 SEBP1891
1237335 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 123-7334 Y [1] CYLINDER HEAD AS  
2. 101-8314 [12] VALVE-EXHAUST  
3. 2A-4429 [48] LOCK-RETAINER  
4. 6N-7175 [24] ROTOCOIL AS  
5. 4N-5906 [24] SPRING-VALVE  
6. 122-7353 [12] VALVE-INLET  
  Y   SEPARATE ILLUSTRATION
 

#SEBP18910038
 

123-7335: CYLINDER HEAD GP

123-7335 CYLINDER HEAD GP
S/N 1RK84-92
PART OF 6I-3598 CYLINDER HEAD GP
i00745608 SEBP1891
1237335 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-1333 YC [1] CYLINDER HEAD AS  
2. 101-8314 [12] VALVE-EXHAUST  
3. 2A-4429 [48] LOCK-RETAINER  
4. 6N-7175 [24] ROTOCOIL AS  
  6N-7174 [1] SHIELD-OIL  
5. 4N-5906 [24] SPRING-VALVE  
6. 122-7353 [12] VALVE-INLET  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP18910039
 

199-3208: CYLINDER HEAD GP

199-3208 CYLINDER HEAD GP
S/N 1RK93-UP
PART OF 6I-3598 CYLINDER HEAD GP
i01481519 SEBP1891
1993208 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 199-3207 Y [1] CYLINDER HEAD AS  
2. 122-7353 [12] VALVE-INLET  
3. 101-8314 [12] VALVE-EXHAUST  
4. 2A-4429 [48] LOCK-RETAINER  
5. 6N-7154 [24] ROTOCOIL AS  
6. 4N-5906 [24] SPRING-VALVE  
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
The Cylinder Liners Have a New Appearance {1216}
2005/03/01
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
New Liner Seat Insert Available
1983/08/17
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
New Cylinder Liner Available
1986/02/01
3400 Engine Major Component Performance Guide Available
1987/07/01
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups
1990/12/01
Thinner Spacer Plates Available For Parts Service
1992/06/01
Connecting Rod Bearing Eliminates The Need For Mid-Life Connecting Rod Bearing Roll-In
1992/08/01
New Liner Seat Inserts Available
1992/11/01
Cylinder Pack Puller Groups Improved
1993/01/01
Damper Requirements For Remanufactured Short Block
1993/08/01
Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/12/01
New Cylinder Liner Seal Resists Deterioration {1216}
1995/03/01
New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}
1996/02/16
New Piston Cooling Jet Tube Assembly Provides Increased Piston Clearance{1331}
1998/03/01
New Piston Cooling Jet Tube Assemblies Provide Increased Piston Clearance For Engines With Gallery Cooled Pistons{1331}
1998/12/01
Be Sure To Use The Correct Piston Cooling Jet Tube Assembly With Gallery Cooled Pistons {1331}
1999/10/01
Modification To Holder To Machine Counterbore On Cylinder Block
1977/03/15
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Be Sure To Use The Correct Piston Cooling Jet Tube Assembly With Gallery Cooled Pistons {1331}
1999/12/01
A New Piston Cooling Jet Assembly Has Been Released {1331}
2006/08/14
Operation and Maintenance Manual
Cylinder Pressure - Test/Record
G3406 Engine
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Technical Information Bulletin
Liner Flange Breakage
Liner Flange Breakage
Specifications
Cylinder Liner
G3406 Engines
Cylinder Block
G3406 Engines
Connecting Rod
G3406 Engines
Piston and Rings
G3406 Engines
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Systems Operation
Cylinder Block, Liners and Heads
G3406 Engine
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Testing and Adjusting
Cylinder Liner Projection
G3406 Engine
Cylinder Block
G3406 Engine
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Liner Seat Insert Available{1217}
1983/08/15
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
New Cylinder Block Groups Used{1201}
1984/10/01
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
New Cylinder Liner Available{1201}
1986/02/10
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Thinner Spacer Plates Available For Parts Service{1221}
1992/06/29
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31
New Liner Seat Inserts Available{1217}
1992/11/09
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16

Caterpillar Parts SIS Catalog G3406 :

CYLINDER BLOCK GP
152-7644 CYLINDER BLOCK GP
CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
CYLINDER BLOCK GP
110-2099 CYLINDER BLOCK GP
CYLINDER BLOCK GP
110-2099 CYLINDER BLOCK GP
CYLINDER BLOCK GP
110-2099 CYLINDER BLOCK GP
CYLINDER BLOCK GP
108-3916 CYLINDER BLOCK GP
CYLINDER BLOCK GP
108-3914 CYLINDER BLOCK GP
CYLINDER BLOCK GP
202-1258 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4P-3720 CYLINDER BLOCK GP
CYLINDER HEAD AS
123-7334 CYLINDER HEAD AS
CYLINDER HEAD AS
151-1333 CYLINDER HEAD AS
CYLINDER HEAD AS
199-3207 CYLINDER HEAD AS
CYLINDER HEAD AS
6I-3600 CYLINDER HEAD AS
CYLINDER HEAD GP
123-7335 CYLINDER HEAD GP
CYLINDER HEAD GP
123-7335 CYLINDER HEAD GP

Truck sale:

Caterpillar G3406, Construction
90,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3406, Construction
99,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3406, Construction
90,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3406, Construction
90,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3406, Construction
90,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.