3G4533 CYLINDER GP-TILT (CHGS 08-10) 165.1 MM (6.50 IN.) BORE X 174 MM (6.86 IN.) STROKE BULLDOZER S/N 4DB1-99999,5SB-99999,6KB1-99999,6JB1-99999,8LH1-UP, 8MH1-UP,8NH1-UP,8RH1-UP PART OF 4T3996, 3G5725 PUSH ARMS-STABILIZER. AN ATTACHMENT D7H

HYDRAULIC SYSTEM

CYLINDER GP

0. 3G-4533 CYLINDER G

IMPLEMENTS

BRACE GP

1. 4T-8067 BRACE GP-B
2. 4T-6137 BRACE GP-B
3. 4T-6137 BRACE GP-B

WORK TOOLS

RIPPER GP

4. 1U-0701 RIPPER AR

IMPLEMENTS

BRACE GP

5. 4T-8066 BRACE GP-B

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)

6. 9J-1641 TOOTH GP-R

RIPPER GP

7. 8E-0945 RIPPER AR
8. 8E-4481 RIPPER GP
9. 3G-5546 RIPPER GP
0. INFORMATION

TRACK-TYPE TRACTOR D7H TRACK-TYPE TRACTOR 79Z
D7H & D7H LGP SERIES II TRACTORS / POWERSHIFT / 79Z04000-UP (MACHINE) POWERED BY 3306 ENGINE SEBP1897 D7H 79Z (1990)

HYDRAULIC SYSTEM

CYLINDER GP

129-4259 CYLINDER GP-LIFT

3G-4533 CYLINDER GP-TILT

#SEBP18970720

3G-4533: CYLINDER GP-TILT

CYLINDER GP-TILT

3G4533 CYLINDER GP-TILT (CHGS 08-10)
165.1 MM (6.50 IN.) BORE X 174 MM (6.86 IN.) STROKE
BULLDOZER S/N 4DB1-99999,5SB-99999,6KB1-99999,6JB1-99999,8LH1-UP,
8MH1-UP,8NH1-UP,8RH1-UP
PART OF 4T3996, 3G5725 PUSH ARMS-STABILIZER. AN ATTACHMENT

c623118 SEBP1897

For full view, you need register

Parts for your D7H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2J-0564	[1]	LOCKNUT
2.	6J-9748	[1]	PISTON
3.	3J-9703	[1]	RING-WEAR
4.	5J-4991	[1]	SEAL AS
5.	6J-9747	[1]	WASHER
6.	3G-4532 R	[1]	CYLINDER AS
7.	1U-1115	[1]	YOKE AS
8.	4J-6374	[2]	BEARING-SLEEVE
9.	6E-5527 C	[1]	HEAD
10.	1D-4709	[4]	BOLT (1-8X3IN)
	5P-8250	[4]	WASHER (5.0MM THK)
11.	9T-6115 R	[1]	ROD AS
12.	3G-0911 B	[28]	SHIM (.8MM THK)
13.	9S-1322	[4]	BOLT (7/8-9X6IN)
	2J-3505	[4]	NUT-FULL (7/8-9 THD)
14.	3G-0910	[1]	CAP-BEARING
15.	2J-1411	[1]	SEAL-LIP
16.	5J-8300	[1]	SEAL-U-CUP
17.	6J-6915	[1]	SEAL-RING
18.	7J-8955 C	[1]	RING-BACKUP
19.	7J-8956 C	[1]	SEAL-O-RING
20.	9T-0094	[1]	RING-WEAR
21.	8T-8379 C	[1]	SEAL-HEAD
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	R		REMFG PART MAY BE AVAILABLE

#SEBP18970721

4T-8067: BRACE GP-BULLDOZER

BRACE GP-BULLDOZER

4T8067 BRACE GP-BULLDOZER
BULLDOZER S/N 4DB1-99999,5SB1-99999,6KB1-99999,6JB1-99999,8LH1-UP
8MH1-UP,8NH1-UP,8RH1-UP. PART OF 4T3996, 3G5725 PUSH ARMS-STABILIZER
AN ATTACHMENT

c519146 SEBP1897

For full view, you need register

Parts for your D7H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4T-8065	[1]	SCREW
2.	4T-7783	[1]	BRACE AS-TILTING
3.	1U-1320	[1]	LUG
4.	4T-5323	[1]	HANDLE
5.	7X-0392	[4]	BOLT
6.	4T-7784	[1]	SCREW
	7X-0449	[4]	NUT-FULL
7.	3G-0911 B	[26]	SHIM
8.	3G-0910	[1]	CAP-BEARING
9.	3B-8489	[2]	FITTING-GREASE
	B		USE AS REQUIRED

#SEBP18970722

4T-6137: BRACE GP-BULLDOZER

BRACE GP-BULLDOZER

4T6137 BRACE GP-BULLDOZER
BULLDOZER S/N 4EB1-UP
4T8066-PAGE 301.02
PART OF 1U0640, 1U0641 BULLDOZER ARS
AN ATTACHMENT

c561941 SEBP1897

For full view, you need register

Parts for your D7H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4F-1252	[2]	PIN
2.	3J-1770	[2]	PIN-LOCK
3.	4T-5495	[2]	BALLSTUD
4.	1U-0873	[2]	PIN
5.	6J-5342	[2]	RETAINER
6.	7X-0365	[4]	BOLT
7.	4T-8066 Y	[2]	BRACE GP-BULLDOZER
8.	3G-0911 B	[52]	SHIM
9.	1U-1212	[2]	CAP
10.	4T-8088	[2]	SCREW
11.	7X-0388	[8]	BOLT
12.	4T-6212	[1]	ARM AS-RH
	8P-9770	[1]	PLATE
13.	9W-1677 C	[1]	BEARING
14.	1U-1220	[1]	PLATE AS
15.	9W-1676 C	[1]	NUT
16.	4T-6211	[1]	ARM AS-LH
	8P-9770	[1]	PLATE
17.	9W-1677 C	[1]	BEARING
18.	1U-1220	[1]	PLATE AS
19.	9W-1676 C	[1]	NUT
20.	4F-2710	[4]	NUT
21.	6F-3183	[2]	CAP-BEARING
22.	8T-8925	[4]	BOLT
23.	8E-5701 B	[52]	SHIM
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP18970723

4T-6137: BRACE GP-BULLDOZER

BRACE GP-BULLDOZER

4T6137 BRACE GP-BULLDOZER
BULLDOZER S/N 4EB1-UP
4T8066-PAGE 301.02
PART OF 9U8550, 1U0640 BULLDOZER ARS
AN ATTACHMENT

c561947 SEBP1897

For full view, you need register

Parts for your D7H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4F-1252	[2]	PIN
2.	3J-1770	[2]	PIN-LOCK
3.	4T-5495	[2]	BALLSTUD
4.	1U-0873	[2]	PIN
5.	6J-5342	[2]	RETAINER
6.	7X-0365	[4]	BOLT
7.	4T-8066 Y	[2]	BRACE GP-BULLDOZER
8.	3G-0911 B	[52]	SHIM
9.	1U-1212	[2]	CAP
10.	4T-8088	[2]	SCREW
11.	7X-0388	[8]	BOLT
12.	4T-6212	[1]	ARM AS-RH
	8P-9770	[1]	PLATE
13.	9W-1677 C	[1]	BEARING
14.	1U-1220	[1]	PLATE AS
15.	4T-6211	[1]	ARM AS-LH
	8P-9770	[1]	PLATE
16.	1U-1220	[1]	PLATE AS
17.	9W-1677 C	[1]	BEARING
18.	8T-8925	[4]	BOLT
19.	8E-5701 B	[52]	SHIM
20.	4F-2710	[4]	NUT
21.	6F-3183	[2]	CAP-BEARING
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP18970724

1U-0701: RIPPER AR

RIPPER AR

1U0701 RIPPER AR
MULTI-SHANK. RIPPER S/N 5HC1-UP
CANNOT BE USED WITH 660 MM (26 IN.) TRACK SHOES
AN ATTACHMENT

SEBP18970724 SEBP1897

For full view, you need register

Parts for your D7H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name


4T-8639 Y	[2]	CYLINDER GP

3G-5150 Y	[1]	FRAME GP-RIPPER

6T-4916 Y	[1]	GUARD GP-TRANSMISSION

1U-0680 Y	[1]	LINES GP-RIPPER

3G-4925 Y	[1]	MOUNTING GP-RIPPER

3G-5546 Y	[1]	RIPPER GP

5P-1327	[1]	PLATE-SERIAL NUMBER
		ON CYLINDER TOWER.
4B-4158	[2]	SCREW-DRIVE
Y		SEPARATE ILLUSTRATION

#SEBP18970725

4T-8066: BRACE GP-BULLDOZER

BRACE GP-BULLDOZER

4T8066 BRACE GP-BULLDOZER
MANUAL TILT. BULLDOZER S/N 4EB1-UP
PART OF 4T6137 BRACE-BULLDOZER
AN ATTACHMENT

c522230 SEBP1897

For full view, you need register

Parts for your D7H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4T-7782	[1]	BRACE AS-TILTING
2.	1U-1320 C	[1]	LUG
3.	7T-9153 C	[1]	HANDLE
4.	1U-1212	[1]	CAP
5.	4T-8065	[1]	SCREW
6.	3B-8489	[2]	FITTING-GREASE
7.	7X-0455	[4]	BOLT
8.	4T-7784	[1]	SCREW
9.	3G-0911 B	[26]	SHIM .508MM(.02IN)THK
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE

#SEBP18970726

9J-1641: TOOTH GP-RIPPER

TOOTH GP-RIPPER

9J1641 TOOTH GP-RIPPER
RIPPER S/N 5HC1-UP
PART OF 3G5546 RIPPER
AN ATTACHMENT

c621432 SEBP1897

For full view, you need register

Parts for your D7H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4J-5241	[2]	RETAINER
2.	9W-7382 C	[1]	SHANK
3.	8E-6358 C	[1]	PIN-G.E.T.
	1U-2405 C	[1]	RETAINER
4.	6Y-0359	[1]	TIP-RIPPER
5.	4J-5240	[1]	PIN
6.	1J-2919 B	[2]	COTTER
7.	9J-3661 CA	[1]	ADAPTER
8.	0L-1329 CB	[2]	BOLT (1/2-13X3IN)
	1K-6872 CB	[2]	LOCKNUT (1/2-13 THD)
9.	9W-9224 CB	[2]	RETAINER
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE

#SEBP18970727

8E-0945: RIPPER AR

RIPPER AR

8E0945 RIPPER AR
MULTI-SHANK. RIPPER S/N 8SH1-UP
FOR USE WITH 2 OR 3 VALVE HYDRAULIC CONTROL AR
AN ATTACHMENT

SEBP18970727 SEBP1897

For full view, you need register

Parts for your D7H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name


6Y-8108 Y	[1]	LINES GROUP-RIPPER

8E-4474 Y	[1]	FRAME GROUP-RIPPER

8E-4476 Y	[1]	MOUNTING GROUP-RIPPER

8E-4481 Y	[1]	RIPPER GROUP

112-4814 Y	[2]	CYLINDER GROUP

119-4154 Y	[1]	GUARD GROUP-TRANSMISSION
Y		SEPARATE ILLUSTRATION

#SEBP18970728

8E-4481: RIPPER GP

RIPPER GP

8E4481 RIPPER GP
RIPPER S/N 8SH1-UP
9J1641-PAGE 301
PART OF 8E0945 RIPPER AR. AN ATTACHMENT

c601619 SEBP1897

For full view, you need register

Parts for your D7H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8E-4483	[1]	BEAM AS
2.	2J-1227	[2]	RETAINER (112MM)
3.	3G-1877	[2]	RETAINER (120MM)
4.	8P-9770	[1]	PLATE
5.	9J-1641 Y	[1]	TOOTH GP-RIPPER
	Y		SEPARATE ILLUSTRATION

#SEBP18970729

3G-5546: RIPPER GP

RIPPER GP

3G5546 RIPPER GP
RIPPER S/N 5HC1-UP
9J1641-PAGE 301
PART OF 1U0701 RIPPER AR. AN ATTACHMENT

c324805 SEBP1897

For full view, you need register

Parts for your D7H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4T-9062	[1]	BEAM AS
2.	3J-6167	[4]	BEARING-SLEEVE
3.	3J-6035	[2]	RETAINER
4.	3G-2035	[3]	BLOCK
5.	3G-2036	[3]	BLOCK
6.	9J-1641 Y	[1]	TOOTH GP-RIPPER
	Y		SEPARATE ILLUSTRATION

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Special Instruction

Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Technical Information Bulletin

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Reuse And Salvage Guidelines

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Service Magazine

Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D7H :

3G-4533 CYLINDER GP-TILT

4T-5307 LINK GP-STABILIZER

4T-5317 LINK GP-STABILIZER

3G-5724 PUSH ARM GP-LH

3G-5723 PUSH ARM GP-RH

3G-5725 PUSH ARM GP-STABILIZER

4T-8067 BRACE GP-BULLDOZER

4T-6137 BRACE GP-BULLDOZER

1U-0701 RIPPER AR

4T-8066 BRACE GP-BULLDOZER

9J-1641 TOOTH GP-RIPPER

8E-0945 RIPPER AR

8E-4481 RIPPER GP

Truck sale:

Caterpillar D7H
- Crawler dozers
WESTERN STATES EQUIPMENT

69,737

Caterpillar D7H, Crawler dozers, Construction
- Crawler dozers
TOROMONT CAT

89,000

Caterpillar D7H, Crawler dozers, Construction

105,500

Caterpillar D7H, Crawler dozers, Construction