AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7X1361 STARTING MOTOR GP-ELECTRIC 12 VOLT MOUNTING HARDWARE IS USED: 3-1B4203 NUT & 3-5M2894 WASHER 428


ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
POWER TRAIN
TORQUE CONVERTER GP
TRANSMISSION GP
DRIVE GP
TRANSMISSION GP

BACKHOE LOADER 428 BACKHOE LOADER 6TC
 428 SERIES II BACKHOE LOADER 6TC06564-UP (MACHINE) POWERED BY 4.236 DIESEL ENGINE SEBP1903 428 6TC   (1986)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
STARTING MOTOR GP-ELECTRIC
7X-1361 STARTING MOTOR GP-ELECTRIC
 

#SEBP19030110
 

7X-1361: STARTING MOTOR GP-ELECTRIC

7X1361 STARTING MOTOR GP-ELECTRIC
12 VOLT
MOUNTING HARDWARE IS USED: 3-1B4203 NUT & 3-5M2894 WASHER
c498846 SEBP1903
7X1361 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 428 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-0856 [1] COIL AS  
2. 9W-0859 [1] ARMATURE AS  
3. 9W-0861 [1] COVER AS  
4. 8T-4133 M [2] NUT  
5. 8T-4121 [2] WASHER  
6. 9W-0845 [1] HOLDER AS-BRUSH  
7. 8C-3652 [1] HOUSING AS-DRIVE  
8. 9W-0862 [1] LEVER AS-FORK  
9. 9W-0850 [1] DRIVE AS-CLUTCH  
10. 9W-0848 [1] BEARING AS  
11. 9W-0853 [1] COVER  
12. 9W-0860 [4] SPRING  
13. 9W-0854 [1] CLAMP  
  6V-8816 M [1] SCREW-MACHINE  
   
   
   
   
   
   
   
   
   
   
   
   
    THE FOLLOWING REPAIR
    KITS ARE AVAILABLE:
  9W-0855 [1] KIT-BRUSH  
  9W-1950 [1] KIT-BUSHING  
  9W-0843 [1] KIT-ARMATURE (INCLUDES  
    RETAINER, RING, SEAL,
    WASHERS AND SHIMS)
  9W-1952 [1] KIT-HARDWARE  
    (INCLUDES SCREWS, NUTS,
    STUD AND WASHERS)
  7X-1590 [1] KIT-SOLENOID  
    (INCLUDES SPACER, SCREW,
    AND SOLENOID AS)
  M   METRIC PART
 

#SEBP19030111
 

8E-0735: TORQUE CONVERTER AS

8E0735 TORQUE CONVERTER AS
PART OF 9W3329 TRANSMISSION
SEBP19030111 SEBP1903
  For full view, you need register

Parts for your 428 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
    NO SERVICEABLE PARTS
 

#SEBP19030112
 

9W-3329: TRANSMISSION AR

9W3329 TRANSMISSION AR
SEBP19030112 SEBP1903
  For full view, you need register

Parts for your 428 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  9W-1355 Y [1] DRIVE GP-FLEX COUPLING  
   
  9W-8111 Y [1] MOUNTING GP-TRANSMISSION  
   
  8E-0735 Y [1] TORQUE CONVERTER AS  
   
  9W-7920 Y [1] TRANSMISSION GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19030113
 

9W-1355: DRIVE GP-FLEXIBLE COUPLING

9W1355 DRIVE GP-FLEXIBLE COUPLING
PART OF 9W3329 TRANSMISSION AR
c534757 SEBP1903
9W1355 DRIVE GP-FLEXIBLE COUPLING Parts scheme
  For full view, you need register

Parts for your 428 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-2742 [1] PLATE-CONVERTER DRIVE  
2. 6T-9487 [1] PLATE  
3. 0L-1138 [6] BOLT  
4. 5K-0906 [6] BOLT (5/16-18X.625IN)  
5. 8T-4224 [6] WASHER-HARD (2MM THK)  
 

#SEBP19030114
 

9W-8111: MOUNTING GP-TRANSMISSION

9W8111 MOUNTING GP-TRANSMISSION
PART OF 9W3329 TRANSMISSION AR
c575022 SEBP1903
9W8111 MOUNTING GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 428 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8675 M [2] BOLT (LOCATION U)  
2. 5P-8245 [17] WASHER  
3. 6V-7673 M [3] BOLT (LOCATION X)  
4. 8T-4244 MC [3] NUT  
5. 6V-8150 M [5] BOLT (LOCATION V)  
6. 6V-5696 M [2] BOLT (LOCATION W)  
7. 9W-8110 [1] ROD  
8. 6V-3535 [2] DOWEL  
9. 8T-4179 M [2] BOLT  
10. 6V-8336 M [2] BOLT (LOCATION Y)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP19030115
 

9W-7920: TRANSMISSION GP

9W7920 TRANSMISSION GP-PART 1 OF 3
TYPE 1
6Y7468-PAGE 112, 6Y3864-PAGE 113.01
PART OF 9W3329 TRANSMISSION AR
c486663 SEBP1903
9W7920 TRANSMISSION GP Parts scheme
  For full view, you need register

Parts for your 428 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-9201 [1] CLIP  
2. 7T-3111 [1] COVER  
3. 6V-5217 M [3] BOLT  
4. 7T-3108 [1] SEAT  
5. 6T-9209 [1] GASKET  
6. 7T-3107 [1] LEVER  
7. 7T-3109 [1] PIN  
8. 6Y-2007 [1] SEAT  
9. 6Y-2008 [1] SEAL  
10. 7T-3049 [1] PLUG  
11. 9W-5454 [1] BOLT  
12. 7T-8494 [1] COVER  
13. 7T-3116 [1] COVER  
14. 6T-9200 [1] GASKET  
15. 6V-3822 M [11] BOLT  
16. 5B-9628 [2] WASHER  
17. 6V-7981 M [2] BOLT  
18. 6V-5842 M [15] BOLT  
19. 6Y-1897 [1] CASE-TMSN-REAR  
20. 6T-9171 [1] GASKET  
21. 6Y-1896 [2] PLUG AS-DRAIN  
22. 3G-6927 [1] ADAPTER  
23. 6E-0924 [1] FILTER-OIL  
24. 6V-5218 M [2] BOLT  
25. 9M-7959 [1] CLAMP  
26. 7T-8536 [1] GASKET  
27. 4F-7952 [1] SEAL-O-RING  
28. 7T-3051 [1] PLUG  
29. 9W-5460 [1] RING  
30. 7T-2649 [1] PIPE AS  
31. 9W-8109 [1] HOUSING-CONVERTER  
32. 9P-9150 C [4] WASHER  
33. 6V-3918 M [4] BOLT  
34. 6Y-3864 [1] PUMP GP-HYDRAULIC  
35. 8T-9592 [1] SEAL-LIP TYPE  
36. 7X-4741 [1] SEAL  
37. 6V-8197 M [8] BOLT  
38. 6V-5215 M [3] BOLT  
39. 6Y-2004 [1] COVER  
40. 7T-3253 [4] DOWEL  
41. 7T-2651 [1] STRAINER  
42. 6T-9202 [2] PLUG  
43. 7T-3251 [1] BREATHER  
44. 9S-4191 [2] PLUG-O-RING  
45. 7T-3119 [1] HOUSING  
46. 6T-9197 [1] GASKET  
47. 6T-9184 [1] GASKET  
48. 8E-1593 [1] CASE AS-FRONT  
49. 7F-0880 [1] GASKET-COPPER  
50. 067-6044 C [1] PLUG  
51. 014-5645 [1] BALL  
52. 7T-3129 [1] SPRING  
53. 3J-1907 [5] SEAL  
54. 7T-3128 [1] GUIDE  
55. 6V-3965 [1] NIPPLE AS  
56. 6V-0852 [1] CAP-DUST  
57. 6V-5221 M [4] BOLT  
58. 6Y-7468 CY [1] VALVE GP-PRESSURE COMPENSATOR  
59. 9W-7904 [1] ADAPTER-VALVE  
60. 6V-4248 M [8] BOLT  
61. 6V-8149 M [1] NUT  
62. 6Y-4429 [1] PLUG  
63. 7T-3113 [1] COVER  
64. 6V-8836 M [4] BOLT  
   
   
65. 8C-5492 [1] SWITCH AS (NEUTRAL ST)  
66. 9B-7233 [2] LOCKWASHER  
67. 6V-8376 [2] SCREW-MACHINE  
68. 7T-3130 [1] PIN  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP19030116
 

9W-7920: TRANSMISSION GP

9W7920 TRANSMISSION GP-PART 2 OF 3
TYPE 1
PART OF 9W3329 TRANSMISSION AR
c515290 SEBP1903
9W7920 TRANSMISSION GP Parts scheme
  For full view, you need register

Parts for your 428 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-1223 C [2] DISC-THRUST  
2. 7T-8493 [2] WASHER  
3. 005-0469 [2] CUP-ROLLER BEARING  
4. 005-0471 [2] CONE-BEARING  
5. 7T-3034 B [1] SHIM .100CM(.0394IN)THK  
6. 6Y-1192 [4] RING-SEAL  
7. 6T-9142 B [1] SHIM .0508CM(.020IN)THK  
  6T-9143 B [1] SHIM .0381CM(.015IN)THK  
  6T-9144 B [1] SHIM .00508CM(.002IN)THK  
  6T-9145 B [1] SHIM .01778CM(.007IN)THK  
  6T-9146 B [1] SHIM .0127CM(.005IN)THK  
  6T-9147 B [1] SHIM .00762CM(.003IN)THK  
8. 7T-3038 C [1] GEAR (20 T) (REVERSE)  
9. 7T-3036 [2] WASHER  
10. 8T-2151 [2] RING  
11. 6Y-1254 [2] RETAINER  
12. 6T-9194 [14] PLATE  
13. 6Y-7929 [12] DISC-FRICTION  
14. 8T-2150 [2] RING  
15. 7T-3122 [2] SPRING AS  
16. 7T-3173 [2] PISTON  
17. 6T-9196 [2] SEAL  
18. 6T-9195 [2] SEAL  
19. 6Y-7466 C [1] SHAFT AS-INPUT  
20. 7T-3035 [4] PIN  
21. 7T-3039 C [1] GEAR (20 T)  
22. 7T-1514 [1] NUT  
23. 6H-0659 [1] WASHER  
24. 9W-5461 [1] GEAR (REVERSE IDLER)  
25. 6V-4636 [2] CUP  
26. 6V-4635 [2] CONE  
27. 7T-3045 B [1] SHIM .200CM(.079IN)THK  
28. 7T-3040 B [1] SHIM .0559CM(.022IN)THK  
  7T-3041 B [1] SHIM .0178CM(.007IN)THK  
  7T-3042 B [1] SHIM .0076CM(.003IN)THK  
  7T-3043 B [1] SHIM .0051CM(.002IN)THK  
29. 7T-3044 [1] SPACER  
30. 7T-3046 [1] GEAR (27 TEETH)  
31. 7T-2646 B [1] SHIM .100CM(.039IN)THK  
32. 6T-9163 B [1] SHIM .0599CM(.024IN)THK  
33. 8T-1580 [2] CUP  
34. 8T-1581 [2] CONE  
35. 9W-5464 [1] GEAR (COUNTERSHAFT)  
36. 6T-9167 [1] GEAR (38 TEETH)  
37. 6V-8501 C [4] BEARING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19030117
 

9W-7920: TRANSMISSION GP

9W7920 TRANSMISSION GP-PART 3 OF 3
TYPE 1
PART OF 9W3329 TRANSMISSION AR
c486665 SEBP1903
9W7920 TRANSMISSION GP Parts scheme
  For full view, you need register

Parts for your 428 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1580 [2] CUP  
2. 8T-1581 [2] CONE  
3. 7T-2646 B [1] SHIM .100CM(.039IN)THK  
4. 8T-2193 [1] SEAL-LIP TYPE  
5. 8E-2043 [1] YOKE AS  
6. 9W-5462 [1] GEAR (4TH)  
7. 6Y-2326 [1] RING  
8. 7T-3022 [2] SLEEVE  
9. 7T-3016 [1] SYNCHRONIZER GP  
10. 6T-9163 B [1] SHIM .0599CM(.024IN)THK  
  6T-9164 B [1] SHIM .0178CM(.007IN)THK  
  6T-9165 B [1] SHIM .0076CM(.003IN)THK  
  6T-9166 B [1] SHIM .0051CM(.002IN)THK  
11. 7T-2645 [1] SPACER  
12. 9W-5463 [1] GEAR (3RD)  
13. 7T-2647 [1] SHAFT (OUTPUT)  
14. 6T-9162 [1] GEAR (35 TEETH)  
15. 7T-3021 [1] SYNCHRONIZER GP  
16. 6Y-2936 [1] SPACER  
17. 6T-9160 [1] GEAR (43 TEETH)  
18. 6V-8500 [2] BEARING  
19. 7T-3017 [1] SPACER  
20. 7T-3018 [1] SLEEVE  
21. 9S-4191 [2] PLUG-O-RING  
22. 3J-1907 [2] SEAL  
23. 6Y-1341 [2] SPRING  
24. 014-5645 [4] BALL  
25. 7T-3102 [1] ROD (UPPER)  
26. 7T-3249 [4] SCREW  
27. 7T-3103 [2] LUG  
28. 7T-3101 [1] FORK (UPPER)  
29. 6V-8836 M [2] BOLT  
30. 7T-3105 [1] PLATE  
31. 7T-3099 [1] FORK (LOWER)  
32. 7T-3100 [1] ROD (LOWER)  
   
    THE FOLLOWING REPAIR
    KITS ARE AVAILABLE :
  6Y-1174 KIT-BEARING  
  6Y-1175 KIT-CLUTCH PACK  
  6Y-1176 KIT-WASHER  
  6Y-1177 KIT-SNAP RING  
  6Y-1178 KIT-SEAL  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP19030118
 

9W-7920: TRANSMISSION GP

9W7920 TRANSMISSION GP-PART 1 OF 3
TYPE 2
6Y7468-PAGE 112, 6Y3864-PAGE 113.01
PART OF 9W3329 TRANSMISSION AR
c678748 SEBP1903
9W7920 TRANSMISSION GP Parts scheme
  For full view, you need register

Parts for your 428 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5V-9155 [1] CLAMP-HOSE  
2. 7T-3111 [1] COVER  
3. 6V-5217 M [3] BOLT (M8X1.25X20MM)  
4. 7T-3108 [1] SEAT  
5. 6T-9209 [1] GASKET  
6. 7T-3107 [1] LEVER  
7. 7T-3109 [1] PIN  
8. 6Y-2007 [1] SEAT  
9. 6Y-2008 [1] SEAL  
10. 7T-3049 [1] PLUG  
11. 9W-5454 [1] BOLT  
12. 7T-8494 [1] COVER  
13. 7T-3116 [1] COVER  
14. 6T-9200 [1] GASKET  
15. 6V-3822 M [11] BOLT (M10X1.50X35MM)  
16. 5B-9628 [2] WASHER  
17. 6V-7981 M [2] BOLT (M10X1.50X70MM)  
18. 6V-5842 M [15] BOLT (M10X1.50X40MM)  
19. 6Y-1897 [1] CASE-REAR TRANSMISSION  
20. 6T-9171 [1] GASKET  
21. 6Y-1896 [1] PLUG AS-DRAIN  
22. 3G-6927 [1] ADAPTER  
23. 119-4740 [1] FILTER-OIL  
24. 6V-5218 M [2] BOLT (M8X1.25X35MM)  
25. 9M-7959 [1] CLAMP  
26. 7T-8536 [1] GASKET  
27. 4F-7952 [1] SEAL-O-RING (37.7MM ID)  
28. 7T-3051 [1] PLUG  
29. 9W-5460 [1] RING  
30. 7T-2649 [1] PIPE AS  
31. 9W-8109 [1] HOUSING-CONVERTER  
32. 9P-9150 C [4] WASHER (.84MM THK)  
33. 6V-3918 M [4] BOLT (M8X1.25X50MM)  
34. 6Y-3864 Y [1] PUMP GP-TRANSMISSION  
35. 8T-9592 A [1] SEAL-LIP  
36. 7X-4741 [1] SEAL  
37. 6V-8197 M [8] BOLT (M12X1.75X40MM)  
38. 6V-5215 M [3] BOLT (M8X1.25X16MM)  
39. 106-9861 [1] PLATE-COVER  
40. 7T-3253 [4] DOWEL  
41. 7T-2651 [1] STRAINER  
42. 6T-9202 [2] PLUG  
43. 7T-3251 [1] BREATHER  
44. 9S-4191 [3] PLUG-O-RING (9/16-18 THD)  
45. 7T-3119 [1] HOUSING  
46. 6Y-2035 [1] GASKET  
47. 6T-9184 [1] GASKET  
48. 8E-1593 [1] CASE AS-FRONT  
49. 7T-3130 [1] PIN  
50. 6Y-4429 [1] PLUG  
51. 014-5645 [1] BALL  
52. 7T-3129 [1] SPRING  
53. 3J-1907 [5] SEAL-O-RING (11.89MM ID)  
54. 7T-3128 [1] GUIDE  
55. 6V-8836 M [4] BOLT  
56. 7T-3113 [1] COVER  
57. 6V-5221 M [4] BOLT (M8X1.25X80MM)  
58. 6Y-7468 CY [1] VALVE GP-PRESSURE COMPENSATOR  
59. 9W-7904 [1] ADAPTER-VALVE  
60. 6V-4248 M [8] BOLT (M10X1.50X25MM)  
61. 6V-8149 M [1] NUT (M12X1.75 THD)  
62. 8C-5492 [1] SWITCH AS-BALL (NEUTRAL START)  
63. 9B-7233 [2] LOCKWASHER (NO.8)  
64. 6V-8376 [2] SCREW-MACHINE (8-32X.25IN)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP19030119
 

9W-7920: TRANSMISSION GP

9W7920 TRANSMISSION GP-PART 2 OF 3
TYPE 2
PART OF 9W3329 TRANSMISSION AR
c555196 SEBP1903
9W7920 TRANSMISSION GP Parts scheme
  For full view, you need register

Parts for your 428 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-1223 C [2] DISC-THRUST  
2. 7T-8493 [2] WASHER  
3. 005-0469 [2] CUP-ROLLER BEARING  
4. 005-0471 [2] CONE-BEARING  
5. 7T-3034 B [1] SHIM .100CM(.0394IN)THK  
6. 6Y-1192 [4] RING-SEAL  
7. 6T-9142 B [1] SHIM .0508CM(.020IN)THK  
  6T-9143 B [1] SHIM .0381CM(.015IN)THK  
  6T-9144 B [1] SHIM .00508CM(.002IN)THK  
  6T-9145 B [1] SHIM .01778CM(.007IN)THK  
  6T-9146 B [1] SHIM .0127CM(.005IN)THK  
  6T-9147 B [1] SHIM .00762CM(.003IN)THK  
8. 7T-3038 C [1] GEAR (20 T) (REVERSE)  
9. 7T-3036 [2] WASHER  
10. 8T-2151 [2] RING  
11. 6Y-1254 [2] RETAINER  
12. 6T-9194 [14] PLATE  
13. 6Y-7929 [12] DISC-FRICTION  
14. 8T-2150 [2] RING  
15. 7T-3122 [2] SPRING AS  
16. 7T-3173 [2] PISTON  
17. 6T-9196 [2] SEAL  
18. 8C-3078 C [2] SEAL-O-RING  
19. 6Y-7466 C [1] SHAFT AS-INPUT  
20. 7T-3035 [4] PIN  
21. 7T-3039 C [1] GEAR (20 T)  
22. 7T-1514 [1] NUT  
23. 6H-0659 [1] WASHER  
24. 9W-5461 [1] GEAR (REVERSE IDLER)  
25. 6V-4636 [2] CUP  
26. 6V-4635 [2] CONE  
27. 7T-3045 B [1] SHIM .200CM(.079IN)THK  
28. 7T-3040 B [1] SHIM .0559CM(.022IN)THK  
  7T-3041 B [1] SHIM .0178CM(.007IN)THK  
  7T-3042 B [1] SHIM .0076CM(.003IN)THK  
  7T-3043 B [1] SHIM .0051CM(.002IN)THK  
29. 7T-3044 [1] SPACER  
30. 7T-3046 [1] GEAR (27 TEETH)  
31. 7T-2646 B [1] SHIM .100CM(.039IN)THK  
32. 6T-9163 B [1] SHIM .0599CM(.024IN)THK  
33. 8T-1580 [2] CUP  
34. 8T-1581 [2] CONE  
35. 9W-5464 [1] GEAR (COUNTERSHAFT)  
36. 6T-9167 [1] GEAR (38 TEETH)  
37. 6V-8501 C [4] BEARING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Engine News
Caterpillar Remanufactured Electric Starting Motors Are Improved {1453}
2011/05/16
Special Instruction
Installation of 7X1590 Sealed Solenoid Kit{1407, 1400}
Installation of 7X1590 Sealed Solenoid Kit{1407, 1400}
Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Starting Motor<BR> (6T8832) Bosch Number 0 001 369 002
4.236 DIESEL ENGINE FOR BACKHOE LOADERS
Starting Motor Solenoid<BR> (9W0863) Bosch Number 0 331 402 204
4.236 DIESEL ENGINE FOR BACKHOE LOADERS
Starter<BR> 6T8832 12 Volt Bosch Number 0001369002
416, 426, 428, 436 & 438 BACKHOE LOADERS OPERATOR'S STATION
Starting Motor
JF Series Starting Motor
Systems Operation
General Information
JF Series Starting Motor
Normal Operation
JF Series Starting Motor
Component Description
JF Series Starting Motor
Testing and Adjusting
Field Winding - Test
JF Series Starting Motor
Armature - Test
JF Series Starting Motor
Brush and Brush Holder - Check
JF Series Starting Motor
No Load - Test
JF Series Starting Motor
Armature End Play - Adjust
JF Series Starting Motor
Starting Motor Solenoid - Test
JF Series Starting Motor
Troubleshooting
Starting Motor Does Not Turn or Turns Slowly
JF Series Starting Motor
Pinion Does Not Engage Ring Gear While Armature Turns
JF Series Starting Motor
Starting Motor Continues to Operate after Start Switch Has Been Released
JF Series Starting Motor
Pinion Continues to Engage after Engine Starts
JF Series Starting Motor
General Information
JF Series Starting Motor
Disassembly and Assembly
Electric Starting Motor
BACKHOE LOADER ENGINE
Starting Motor - Disassemble
JF Series Starting Motor
Starting Motor - Assemble
JF Series Starting Motor
General Information
JF Series Starting Motor
Service Magazine
New Procedure To Prime Fuel System Using Engine Starter{1250,1450}
1988/02/29
New Starting Motor Has Sealed Solenoid {1407,1453}
1988/07/18
Improved Sealing For Starter Solenoid{1467}
1990/07/23
7X1361 Electric Starting Motor Group Improved{1518}
1992/10/12

Caterpillar Parts SIS Catalog 428 :

ALTERNATOR GP-CHARGING
7T-2876 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
2W-9774 ALTERNATOR GP-CHARGING
LAMP GP-HEAD & TURN
7X-6109 LAMP GP-HEAD & TURN
LAMP GP-HEAD & TURN
7X-6108 LAMP GP-HEAD & TURN
9R-6510 LIGHTING GP-ROADING
LAMP GP-HEAD & TURN
7T-7104 LAMP GP-HEAD & TURN
LAMP GP-HEAD & TURN
7T-7103 LAMP GP-HEAD & TURN
LIGHTING GP-ROADING
9R-1174 LIGHTING GP-ROADING
8E-0735 TORQUE CONVERTER AS
9W-3329 TRANSMISSION AR
DRIVE GP-FLEXIBLE COUPLING
9W-1355 DRIVE GP-FLEXIBLE COUPLING
MOUNTING GP-TRANSMISSION
9W-8111 MOUNTING GP-TRANSMISSION
TRANSMISSION GP
9W-7920 TRANSMISSION GP
9W-7920 TRANSMISSION GP
9W-7920 TRANSMISSION GP
TRANSMISSION GP
9W-7920 TRANSMISSION GP

Truck sale:

 
 
Caterpillar 428, backhoe loader, Construction
- backhoe loader
BERGERAT MONNOYEUR SP. Z O.O.
 
78,072 
Caterpillar 428, backhoe loader, Construction
- backhoe loader
FINANZAUTO S.A.
 
81,118 
Caterpillar 428, backhoe loader, Construction
- backhoe loader
BERGERAT MONNOYEUR SP. Z O.O.
 
 
Caterpillar 428-07, backhoe loader, Construction


Caterpillar 428-07LRC, backhoe loader, Construction
119,900 
Caterpillar 428-07LRC, backhoe loader, Construction

TRACSA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.