AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4T-1659 CYLINDER GP-BULLDOZER LIFT S/N 8RC4000-UP; 1DD4000-UP; 1YH1-UP; 2AH1-UP; 6SH1-UP; 6TH1-UP 114.3 MM (4.50")BORE X 435 MM (17.13")STROKE. LIFT PART OF 3A-8421, 3A-8440, 3A-8583, 3A-8590, 8E-2223, 8E-2225 BULLDOZER AR-ANGLING AN ATTACHMENT D5H


HYDRAULIC SYSTEM
CYLINDER GP
FILTER GP
HYDRAULIC GP

TRACK-TYPE TRACTOR D5H TRACK-TYPE TRACTOR 1DD
 D5H LGP Series II Track-Type Tractors Power Shift 1DD04000-UP (MACHINE) POWERED BY 3304 Engine SEBP1915 D5H 1DD   (1986)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BULLDOZER LIFT
4T-1089 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
4T-1659 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
4T-1659 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
6E-5400 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-RIPPER
3G-5909 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
9T-2716 CYLINDER GP-RIPPER
 

#SEBP19150380
 

4T-1659: CYLINDER GP-BULLDOZER LIFT

4T-1659 CYLINDER GP-BULLDOZER LIFT
S/N 8RC4000-UP; 1DD4000-UP; 1YH1-UP; 2AH1-UP; 6SH1-UP; 6TH1-UP
114.3 MM (4.50")BORE X 435 MM (17.13")STROKE. LIFT
PART OF 3A-8421, 3A-8440, 3A-8583, 3A-8590, 8E-2223, 8E-2225 BULLDOZER AR-ANGLING
AN ATTACHMENT
i00375388 SEBP1915
4T1659 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-8425 [1] CYLINDER AS  
  9T-8424 [1] BUSHING  
2. 8F-9836 [2] BOSS (3/8-16-THD)  
3. 5J-4986 [1] SEAL AS  
4. 8J-5549 [1] PISTON  
5. 4T-1655 [1] CROWN  
6. 9T-9257 C [1] HEAD  
7. 8C-9134 C [1] SEAL-LIP TYPE  
8. 9T-8426 [1] ROD AS  
  9T-8424 [1] BUSHING  
9. 5J-8225 [1] SEAL-U-CUP  
10. 1K-7095 [1] RING-BACKUP  
11. 8C-9125 C [1] SEAL AS  
12. 4K-0684 [1] WASHER-HARD (34X55X6-MM THK)  
13. 6V-5599 [1] BOLT-LOCKING (1-1/4-12X3-IN)  
14. 4J-3745 [1] RING-WEAR  
15. 2H-3928 [1] SEAL-O-RING  
16. 8T-4958 C [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  8T-1396 [1] KIT-SEAL (INCL RINGS & SEALS)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP19150381
 

6E-5400: CYLINDER GP-BULLDOZER LIFT

6E-5400 CYLINDER GP-BULLDOZER LIFT
S/N 1YH1-UP; 6SH1-UP; 6TH1-UP; 7AH1-UP
114.3 MM (4.5 IN) BORE X 435 MM (17.1 IN) STROKE. LIFT
PART OF 3A-8583, 3A-8590, 8E-2225 BULLDOZER AR-ANGLING, 9U-8234 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00401572 SEBP1915
6E5400 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-5450 [1] ROD AS  
2. 6E-5449 [1] BEARING  
3. 8C-9134 [1] SEAL-LIP TYPE  
4. 5J-8225 [1] SEAL-U-CUP  
5. 8C-9125 [1] SEAL AS  
6. 8T-4958 [1] RING-WEAR  
7. 6E-3570 [1] HEAD  
8. 1K-7095 [1] RING-BACKUP  
9. 5H-6734 [1] SEAL-O-RING  
10. 6E-3569 [1] PISTON  
11. 9X-7269 [1] SEAL AS  
12. 4J-3745 [1] RING-WEAR  
13. 3S-7023 [1] WASHER (34X57X6-MM THK)  
14. 8C-3411 M [1] BOLT (M30X3.5X90-MM)  
15. 6E-5401 [1] CYLINDER AS  
  4D-9376 [2] BOSS (3/8-16-THD)  
16. 6E-5449 [1] BEARING  
17. 2R-1236 [1] RING-RETAINING (LOCK, INTERNAL)  
  M   METRIC PART
 

#SEBP19150382
 

3G-5909: CYLINDER GP-RIPPER

3G-5909 CYLINDER GP-RIPPER
S/N 2DH1-UP
102 MM (4")BORE X 451 MM (17.75") STROKE. RIPPER
PART OF 3G-4879 CYLINDER & MOUNTING GP
AN ATTACHMENT
i00364863 SEBP1915
3G5909 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-6214 [1] PLUG (1/8-27 PTF)  
2. 6J-2797 P [1] RING-WEAR  
3. 5J-5402 P [1] SEAL AS  
4. 7J-6469 [1] PISTON  
5. 3G-6533 [1] CYLINDER AS  
6. 289-2935 CNP [1] SEAL AS-BUFFER  
7. 289-2946 NP [1] SEAL-U-CUP  
8. 7J-6461 [1] CROWN  
9. 3G-6895 [1] ROD AS  
10. 308-1845 CNP [1] SEAL-WIPER  
11. 2K-6830 P [1] RING-BACKUP  
12. 1H-8128 P [1] SEAL-O-RING  
13. 9T-9258 C [1] HEAD AS  
14. 8J-7415 [1] WASHER-HARD (28X51X4.5-MM THK)  
15. 7J-5639 [1] BOLT-LOCKING (1-14X2.5-IN)  
16. 4T-5613 CN [1] RING-WEAR  
17. 8J-0484 [1] RING-RETAINING  
   
    AVAILABLE REPAIR KIT(S):
  233-9207 N [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
    (OVERSIZE BORE 0.76-MM)
  240-6899 P [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
    (STANDARD SIZE BORE)
    (ALL KITS ABOVE FOR USE WITH REHS1392)
  C   CHANGE FROM PREVIOUS TYPE
  N   KIT MARKED N SERVICES PART(S) MARKED N
  P   KIT MARKED P SERVICES PART(S) MARKED P
 

#SEBP19150383
 

9T-2716: CYLINDER GP-RIPPER

9T-2716 CYLINDER GP-RIPPER -LIFT
S/N 6YH1-UP
127-MM (5-IN) BORE X 362-MM (14.25-IN) STROKE
PART OF 3A-8606 RIPPER AR
AN ATTACHMENT
i00433106 SEBP1915
9T2716 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-1753 [1] PISTON  
2. 4J-3420 [1] RING-WEAR  
3. 5J-5020 [1] SEAL AS  
  5J-4973 [1] RING-EXPANDER  
  5J-4974 [1] SEAL  
4. 9T-2715 [1] CYLINDER AS  
4A. 4K-3128 [2] BUSHING  
5. 5P-8249 [4] WASHER-HARD (24X41.5X4-MM THK)  
6. 9T-6863 C [1] HEAD  
7. 167-2201 C [1] SEAL AS-BUFFER  
8. 167-2312 C [1] SEAL-U-CUP  
9. 225-3281 C [1] SEAL-WIPER  
10. 9T-2714 [1] ROD AS  
11. 2K-4507 [1] BUSHING  
12. 1D-4628 [4] BOLT (7/8-9X3.25-IN)  
13. 2K-4096 [1] RING-BACKUP  
14. 310-2189 [1] SEAL-O-RING  
15. 3G-1757 [1] WASHER (50.95X82X12-MM THK)  
16. 2J-0564 [1] LOCKNUT (2-12-THD)  
17. 8T-5668 C [1] RING-WEAR  
18. 1P-4576 [4] FLANGE-HALF  
19. 4J-5267 [2] SEAL-O-RING  
20. 5H-4018 [2] COVER  
21. 9B-7237 [8] BOLT (3/8-16X1.25-IN)  
22. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP19150384
 

4T-2613: CYLINDER GP-TILT

4T-2613 CYLINDER GP-TILT
S/N 8RC4000-UP; 1DD4000-UP; 2BH1-UP; 6FH1-UP; 6WH1-UP
127 MM (5 IN) BORE X 175 MM (6.89 IN) STROKE
PART OF 4T-2162, 4T-2452 CYLINDER AR-TILT, 6Y-1478, 6Y-1479 PUSH ARM GP
AN ATTACHMENT
i00376094 SEBP1915
4T2613 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-2629 [1] CYLINDER AS  
  4T-2632 [1] EYE  
  7J-9884 [1] BEARING  
2. 1J-2921 [1] BOLT (1-1/2-12X3.75-IN)  
3. 3S-6162 [1] WASHER-HARD (40.5X67X6-MM THK)  
4. 8J-6163 [1] PISTON  
5. 4J-3420 [1] RING-WEAR  
6. 5J-5020 [1] SEAL AS  
7. 8J-6166 [1] CROWN  
8. 8C-3840 C [1] SEAL-LIP TYPE  
9. 4T-2634 [1] ROD AS  
10. 5J-0964 [1] SEAL-U-CUP  
11. 2K-4096 [1] RING-BACKUP  
12. 5F-3144 [1] SEAL-O-RING  
13. 8C-3839 C [1] SEAL AS  
14. 9T-6549 C [1] HEAD  
15. 7X-0372 [4] BOLT (3/4-10X4.25-IN)  
  2J-3506 [4] NUT-FULL (3/4-10-THD)  
16. 4J-0121 [1] CAP AS-BEARING  
17. 8E-5703 B [20] SHIM (0.8-MM THK)  
18. 8T-8394 C [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  8T-1375 [1] KIT-SEAL (INCL RINGS)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19150385
 

9T-9558: CYLINDER GP-TILT

9T-9558 CYLINDER GP-TILT
S/N 1YH1-UP; 2AH1-UP; 6SH1-UP; 6TH1-UP; 7AH1-UP
120.65 MM (4.75 IN.) BORE X 200 MM (7.9 IN.) STROKE. TILT
PART OF 3A-8421, 3A-8440, 3A-8583, 3A-8590, 8E-2223, 8E-2224, 8E-2225, 8E-2226 BULLDOZER AR-ANGLING, 9U-8234, 9U-8235 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00437606 SEBP1915
9T9558 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-9597 [1] CYLINDER AS  
  1U-1730 [2] LUG  
  9J-0398 [2] BOSS  
  1S-3311 [1] RING-RETAINING  
  7J-1309 [1] BEARING  
2. 4T-1632 [1] PISTON  
3. 5P-1839 [1] BOLT-LOCKING (1-1/4-12X3.75-IN)  
4. 4K-0684 [1] WASHER-HARD (34X55X6-MM THK)  
5. 4J-3342 [1] RING-WEAR  
6. 4T-8588 [1] SEAL AS  
7. 2J-3961 [1] RING-BACKUP  
8. 5J-8225 [1] SEAL-U-CUP  
9. 8C-9134 [1] SEAL-LIP TYPE  
10. 3G-3910 [1] CROWN  
11. 6E-1456 [1] ROD AS  
  9J-7964 [1] BEARING-SPHERICAL  
  1K-6985 [2] RING-RETAINING  
12. 9T-9563 [1] HEAD  
13. 8C-9125 [1] SEAL AS  
14. 5H-6734 [1] SEAL-O-RING  
15. 8T-4958 [1] RING-WEAR  
16. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
 

#SEBP19150386
 

9T-3926: FILTER & MTG GP-HYDRAULIC

9T-3926 FILTER & MTG GP-HYDRAULIC
S/N 8RC5500-UP; 1DD5500-UP
PART OF 8G-4340, 9U-9163 LINES GP-PUMP
ALSO AN ATTACHMENT
i00433754 SEBP1915
9T3926 FILTER & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6915 [1] FILTER-OIL (STANDARD EFFICIENCY)  
2. 1L-0509 [4] BOLT (3/8-16X0.74-IN)  
3. 4F-7391 [1] SEAL-O-RING  
 

#SEBP19150387
 

3W-1055: HYDRAULIC AR

3W-1055 HYDRAULIC AR
S/N 8RC4000-5499
2 VALVE
AN ATTACHMENT
i00365104 SEBP1915
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8G-4479 Y [1] CONTROL GP-HYDRAULIC HAND (LIFT)  
  8G-4481 Y [1] CONTROL GP-HYDRAULIC HAND (TILT)  
  8G-4359 Y [1] LINES GP-LIFT CYLINDER  
  8G-4340 Y [1] LINES GP-PUMP  
  8G-4356 Y [1] LINES GP-TILT CYLINDER  
  8G-4478 Y [1] MOUNTING GP-CONTROL VALVE  
  9T-3029 Y [1] PUMP GP-PISTON  
  4T-1604 Y [1] TANK & FILTER GP-HYDRAULIC  
    -OR-
  9T-3825 Y [1] TANK & FILTER GP-HYDRAULIC  
  9T-6700 Y [1] VALVE GP-BANK  
  3W-6997 Y [1] WIRING GP-HYDRAULIC  
   
  5F-3106 [1] SEAL-O-RING  
  5P-9884 [1] FILM-IDENTIFICATION (HYDRAULIC OIL)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19150388
 

3W-1056: HYDRAULIC AR

3W-1056 HYDRAULIC AR
S/N 1DD4000-5499
LGP - 2 VALVE
AN ATTACHMENT
i00365107 SEBP1915
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8G-4479 CY [1] CONTROL GP-HYDRAULIC HAND (LIFT)  
  8G-4481 CY [1] CONTROL GP-HYDRAULIC HAND (TILT)  
  8G-7713 CY [1] LINES GP-LIFT CYLINDER  
  8G-4340 CY [1] LINES GP-PUMP  
  8G-4356 CY [1] LINES GP-TILT CYLINDER  
  8G-4478 CY [1] MOUNTING GP-CONTROL VALVE  
  9T-3029 CY [1] PUMP GP-PISTON  
  4T-1604 CY [1] TANK & FILTER GP-HYDRAULIC  
    -OR-
  9T-3825 Y [1] TANK & FILTER GP-HYDRAULIC  
  9T-6700 Y [1] VALVE GP-BANK  
  3W-6997 CY [1] WIRING GP-HYDRAULIC  
   
  5P-9884 [1] FILM-IDENTIFICATION (HYDRAULIC OIL)  
    ON TOP OF TANK ADJACENT TO HYDRAULIC TANK FILLER SPOUT
  5F-3106 C [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19150389
 

3W-1057: HYDRAULIC AR

3W-1057 HYDRAULIC AR
S/N 8RC4000-5499; 1DD4000-5499
3 VALVE
AN ATTACHMENT
i00365111 SEBP1915
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8G-4479 CY [1] CONTROL GP-HYDRAULIC HAND (LIFT)  
  8G-4480 CY [1] CONTROL GP-HYDRAULIC HAND (ANGLING)  
  8G-4481 CY [1] CONTROL GP-HYDRAULIC HAND (TILT)  
  8G-4441 CY [1] LINES GP-ANGLING CYLINDER  
  8G-4442 CY [1] LINES GP-LIFT CYLINDER  
  8G-4340 CY [1] LINES GP-PUMP  
  8G-7711 CY [1] LINES GP-TILT CYLINDER  
  8G-4478 CY [1] MOUNTING GP-CONTROL VALVE  
  9T-3029 CY [1] PUMP GP-PISTON  
  4T-1604 CY [1] TANK & FILTER GP-HYDRAULIC  
    -OR-
  9T-3825 Y [1] TANK & FILTER GP-HYDRAULIC  
  9T-9183 Y [1] VALVE GP-BANK  
  3W-6997 CY [1] WIRING GP-HYDRAULIC  
   
  5P-9884 [1] FILM-IDENTIFICATION (HYDRAULIC OIL)  
    ON TOP OF TANK ADJACENT TO HYDRAULIC TANK FILLER SPOUT
  5F-3106 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D5H :

CYLINDER GP-BULLDOZER LIFT
4T-1659 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
4T-1089 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
4T-1089 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
1U-1839 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
1U-1839 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-ANGLING
9T-9273 CYLINDER GP-ANGLING
CYLINDER GP-ANGLING
9T-9273 CYLINDER GP-ANGLING
4T-2452 CYLINDER AR-TILT
CYLINDER GP-BULLDOZER LIFT
6E-5400 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-RIPPER
3G-5909 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
9T-2716 CYLINDER GP-RIPPER
CYLINDER GP-TILT
4T-2613 CYLINDER GP-TILT
CYLINDER GP-TILT
9T-9558 CYLINDER GP-TILT
FILTER & MTG GP-HYDRAULIC
9T-3926 FILTER & MTG GP-HYDRAULIC
3W-1055 HYDRAULIC AR
3W-1056 HYDRAULIC AR

Truck sale:

CATERPILLAR D5H 1986
 
CATERPILLAR D5H 1986
- TRACK TYPE TRACTORS
FABICK CAT
 
 
CATERPILLAR D5H 1990
- TRACK TYPE TRACTORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
CATERPILLAR D5H 1989
 
CATERPILLAR D5H 1989
- TRACK TYPE TRACTORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
1991 CAT D5H
Call 
1991 CAT D5H

Chin Xing Agro Machinery PLT
Alor Star, KEDAH, Malaysia 06250
1992 CAT D5H
USD $39,500 
1992 CAT D5H

SOUTHWEST TRACTOR & PARTS
Atoka, Oklahoma
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.