AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8G-7711 LINES GP-TILT CYLINDER S/N 8RC4000-4453; 1DD4000-4334 PART OF 3W-1057 HYDRAULIC AR AN ATTACHMENT D5H


HYDRAULIC SYSTEM
LINES GP-CYLINDER
LINES GP-WINCH
MOUNTING GP
CYLINDER GP
PUMP GP

TRACK-TYPE TRACTOR D5H TRACK-TYPE TRACTOR 1DD
 D5H LGP Series II Track-Type Tractors Power Shift 1DD04000-UP (MACHINE) POWERED BY 3304 Engine SEBP1915 D5H 1DD   (1986)

HYDRAULIC SYSTEM

LINES GP-CYLINDER
LINES GP-TILT CYLINDER
8G-4356 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
8G-4356 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
8G-7711 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
8G-7711 LINES GP-TILT CYLINDER
 

#SEBP19150420
 

8G-7711: LINES GP-TILT CYLINDER

8G-7711 LINES GP-TILT CYLINDER
S/N 8RC4000-4453; 1DD4000-4334
PART OF 3W-1057 HYDRAULIC AR
AN ATTACHMENT
i00423115 SEBP1915
8G7711 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8713 [2] CONNECTOR  
2. 3W-3886 [1] TUBE AS  
3. 3W-3885 [1] TUBE AS  
4. 3W-3223 [1] TUBE AS  
5. 3W-3204 [1] TUBE AS  
6. 3W-3222 [1] TUBE AS  
7. 8T-1810 [2] ELBOW  
8. 6V-9169 [2] NUT (13/16-16-THD)  
9. 3D-2824 [2] SEAL-O-RING  
10. 7J-9108 [7] SEAL-O-RING  
11. 4S-8002 [2] CLAMP  
12. 5S-7379 [1] BOLT (3/8-16X0.875-IN)  
13. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

#SEBP19150421
 

8G-7711: LINES GP-TILT CYLINDER

8G-7711 LINES GP-TILT CYLINDER
S/N 8RC5500-UP; 1DD5500-UP
PART OF 3W-1057, 8E-8688 HYDRAULIC AR
ALSO AN ATTACHMENT
i00423120 SEBP1915
8G7711 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8637 C [1] CONNECTOR  
2. 8E-3869 C [1] TUBE AS  
3. 8E-3868 C [1] TUBE AS  
4. 3W-3223 [1] TUBE AS  
5. 3W-3204 [1] TUBE AS  
6. 3W-3222 [1] TUBE AS  
7. 8T-1810 [2] ELBOW  
8. 6V-9169 [2] NUT (13/16-16-THD)  
9. 3D-2824 [2] SEAL-O-RING  
10. 6V-9746 C [2] SEAL-O-RING  
11. 4S-8002 [2] CLAMP  
12. 9B-7237 C [1] BOLT (3/8-16X1.25-IN)  
13. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
14. 6V-9162 C [1] CONNECTOR  
15. 7J-9108 C [5] SEAL-O-RING  
16. 305-0441 [2] BAND-MARKER (HS)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19150422
 

6Y-7232: LINES GP-WINCH

6Y-7232 LINES GP-WINCH
S/N 2EJ1-UP
WINCH
PART OF 6Y-7222 WINCH AR-TOWING
AN ATTACHMENT
i00394877 SEBP1915
6Y7232 LINES GP-WINCH Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-4439 [1] ADAPTER  
2. 5K-9239 [1] CONNECTOR  
3. 6Y-4570 [1] TUBE AS  
4. 5K-9238 [4] CONNECTOR  
5. 6K-8214 [1] TEE-FLARED  
6. 6L-3616 [3] CONNECTOR  
7. 6T-4099 [1] TUBE AS  
8. 9G-0796 [1] TUBE AS  
9. 2J-0157 [2] SEAL-O-RING  
10. 7T-7822 [1] TUBE  
11. 7T-7819 [1] TUBE  
12. 7T-7820 [1] TUBE  
13. 7T-7821 [1] TUBE  
14. 7T-7823 [1] TUBE  
15. 4H-1966 [10] CONNECTOR  
16. 2S-4958 [1] SLEEVE  
17. 8M-4435 [2] SEAL-O-RING  
18. 9L-9045 [1] TEE  
19. 6V-0367 [1] ADAPTER  
20. 9G-0798 [1] TUBE AS  
21. 6Y-4740 [1] TUBE AS  
22. 5K-9244 [1] ELBOW-FLARED  
23. 0S-1613 [1] BOLT (1/4-20X0.375-IN)  
  1A-5350 [1] CLIP  
  5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
24. 9W-3305 [1] TUBE AS  
25. 6Y-5424 [1] VALVE AS (ORIFICE CHECK)  
26. 030-7764 [1] FITTING  
27. 5K-9243 [1] ELBOW-FLARED  
28. 6T-5994 [1] TUBE AS  
 

#SEBP19150423
 

8G-4449: LINES GP-WINCH

8G-4449 LINES GP-WINCH
S/N 8RC4000-UP; 1DD4000-UP
PART OF 7T-9867 INSTALLATION AR-WINCH
AN ATTACHMENT
i00421356 SEBP1915
8G4449 LINES GP-WINCH Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-0325 [6] BOLT (1/2-13X2.5-IN)  
2. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 1P-3705 [1] SEAL-RECTANGULAR  
4. 6V-2432 E HOSE (22 CM)  
5. 6K-8178 [1] CLIP (LOOP)  
6. 6J-4483 [1] LUG  
7. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
8. 8T-4896 [19] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 3W-2765 [1] TUBE AS  
10. 5S-7379 [2] BOLT (3/8-16X0.875-IN)  
11. 3H-4776 [1] BOSS (3/8-16X1.25-IN)  
12. 8J-4916 [1] BOSS (3/8-16-THD)  
13. 7S-3916 [1] CLIP (TAB)  
  7S-3919 [1] CLIP (SLOT)  
14. 4J-5267 [2] SEAL-O-RING  
15. 1P-4576 [4] FLANGE-HALF  
16. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
17. 8G-6087 I [1] HOSE AS  
18. 1P-4579 [2] FLANGE-HALF  
19. 4J-0524 [2] SEAL-O-RING  
20. 5P-2566 [4] BOLT (1/2-13X1.5-IN)  
21. 3W-2540 I [1] HOSE AS  
22. 5P-0597 [6] CLAMP-HOSE  
23. 004-1265 [1] CLAMP  
24. 1P-3703 [2] SEAL-RECTANGULAR  
25. 1P-5760 [2] FLANGE-HALF  
26. 4L-9337 [4] BOLT (3/8-16X1.5-IN)  
27. 3W-2766 [1] TUBE  
28. 4D-2886 [2] CLIP  
29. 3W-2767 [1] TUBE AS  
30. 3W-2598 [1] ELBOW  
31. 8T-9377 [4] BOLT (3/8-16X2.25-IN)  
32. 3W-2539 [1] TUBE AS  
  6V-0421 [2] PLUG  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP19150424
 

8G-4478: MOUNTING GP-CONTROL VALVE

8G-4478 MOUNTING GP-CONTROL VALVE
S/N 8RC5500-UP; 1DD5500-UP
PART OF 3W-1055, 3W-1056, 3W-1057, 3W-1058, 8E-8688 HYDRAULIC AR
ALSO AN ATTACHMENT
i00421753 SEBP1915
8G4478 MOUNTING GP-CONTROL VALVE Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-1474 [1] PLATE AS  
  3T-6090 [1] BOSS  
2. 9F-2978 [26] NUT-WELD (3/8-16-THD)  
3. 8T-2502 [4] BOLT (3/8-16X1.125-IN)  
  5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
4. 4L-9337 [3] BOLT (3/8-16X1.5-IN)  
  8T-4896 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

#SEBP19150425
 

8E-6518: MOUNTING GP-CYLINDER

8E-6518 MOUNTING GP-CYLINDER
S/N 1DD4000-UP; 6FH1-UP; 6WH1-UP
PART OF 3A-8597, 8E-2269 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
i00415196 SEBP1915
8E6518 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6522 [2] LINK AS  
2. 4T-0231 [6] RETAINER  
3. 5P-2228 [4] BOLT (1/2-13X1-IN)  
4. 8G-5502 J [1] HANDHOLD  
5. 3G-8891 [4] SPACER (45X50X18-MM THK)  
6. 8E-6537 [2] PIN AS  
7. 8G-5501 L [1] HANDHOLD  
8. 8E-6520 [1] SUPPORT AS  
9. 8E-6526 [2] BUSHING-TERMINAL  
10. 8G-5428 [2] PIN  
11. 8E-6519 [1] SUPPORT AS  
12. 8T-8917 [6] BOLT (1/2-13X1.25-IN)  
13. 8E-6523 [4] PIN  
  4J-0805 B [30] WASHER (1.781X2.5X0.12-IN THK)  
14. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
15. 1K-6872 [2] LOCKNUT (1/2-13-THD)  
16. 2B-2938 [2] PIN-CLEVIS  
17. 6S-6646 [2] PIN-COTTER  
18. 9W-9996 [2] BAR  
19. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 7X-0381 [2] BOLT (7/8-9X2-IN)  
  6S-3931 [2] WASHER  
  3P-9111 [2] SPACER (23X41.3X19-MM THK)  
  B   USE AS REQUIRED
  J   ASSEMBLE LH HANDLE ON RH SIDE OF MACHINE
  L   ASSEMBLE RH HANDLE ON LH SIDE OF MACHINE
 

#SEBP19150426
 

8E-6531: MOUNTING GP-CYLINDER

8E-6531 MOUNTING GP-CYLINDER
S/N 2BH1-UP
PART OF 6Y-1734 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
i00415205 SEBP1915
8E6531 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8917 [6] BOLT (1/2-13X1.25-IN)  
2. 4T-0231 [6] RETAINER  
3. 4T-7457 [2] LINK AS  
4. 8E-6537 [2] PIN AS  
5. 8G-5501 [1] HANDHOLD  
6. 5P-2228 [4] BOLT (1/2-13X1-IN)  
7. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
8. 8E-6523 [4] PIN  
9. 8E-6533 [1] SUPPORT AS  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
  8P-9770 [1] PLATE  
10. 8G-5428 [2] PIN  
11. 8E-6526 [2] BUSHING-TERMINAL  
12. 3G-8891 [4] SPACER (45X50X18-MM THK)  
13. 8G-5502 [1] HANDHOLD  
14. 8E-6532 [1] SUPPORT AS  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
  8P-9770 [1] PLATE  
15. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
  1K-6872 [2] LOCKNUT (1/2-13-THD)  
16. 2B-2938 [2] PIN-CLEVIS  
  6S-6646 [2] PIN-COTTER  
17. 9W-9996 [2] BAR  
18. 3P-9111 [2] SPACER (23X41.3X19-MM THK)  
19. 7X-0381 [2] BOLT (7/8-9X2-IN)  
  6S-3931 [2] WASHER  
20. 4J-0805 B [30] WASHER (1.781X2.5X0.12-IN THK)  
  B   USE AS REQUIRED
 

#SEBP19150427
 

8G-4054: MOUNTING GP-CYLINDER

8G-4054 MOUNTING GP-CYLINDER
S/N 1DD4000-UP; 6FH1-UP; 6WH1-UP
PART OF 3A-8597, 8E-2269 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
i00420524 SEBP1915
8G4054 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8G-5501 L [1] HANDHOLD  
2. 4T-6524 [1] SUPPORT AS (LH)  
  1F-0748 [1] NUT-WELD (1/2-13-THD)  
  8P-9770 [1] PLATE  
4. 8G-5427 [2] BUSHING-TERMINAL  
5. 8G-5428 [2] PIN  
6. 4T-6523 [1] SUPPORT AS (RH)  
  1F-0748 [1] NUT-WELD (1/2-13-THD)  
  8P-9770 [1] PLATE  
7. 8T-8917 [8] BOLT (1/2-13X1.25-IN)  
8. 3G-8900 [4] PIN  
9. 5P-2228 [4] BOLT (1/2-13X1-IN)  
10. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
11. 8G-5502 J [1] HANDHOLD  
12. 3G-8891 [4] SPACER (45X50X18-MM THK)  
13. 3G-8917 [2] PIN  
14. 4T-0231 [8] RETAINER  
15. 4T-6522 [2] LINK AS  
16. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
17. 1K-6872 [2] LOCKNUT (1/2-13-THD)  
18. 2B-2938 [2] PIN-CLEVIS  
19. 6S-6646 [2] PIN-COTTER  
20. 9W-9996 [1] BAR  
  J   ASSEMBLE LH HANDLE ON RH SIDE OF MACHINE
  L   ASSEMBLE RH HANDLE ON LH SIDE OF MACHINE
 

#SEBP19150428
 

8G-4328: MOUNTING GP-CYLINDER

8G-4328 MOUNTING GP-CYLINDER
S/N 8RC4000-UP; 2BH1-UP
PART OF 6Y-1734 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
i00420871 SEBP1915
8G4328 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8917 [8] BOLT (1/2-13X1.25-IN)  
2. 4T-0231 [8] RETAINER  
3. 4T-7457 [2] LINK AS  
4. 3G-8917 [2] PIN  
5. 8G-5501 [1] HANDHOLD  
6. 5P-2228 [4] BOLT (1/2-13X1-IN)  
7. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
8. 3G-8900 [4] PIN  
9. 4T-7459 [1] SUPPORT AS  
10. 8G-5428 [2] PIN  
11. 8G-5427 [2] BUSHING-TERMINAL  
12. 3G-8891 [4] SPACER (45X50X18-MM THK)  
13. 8G-5502 [1] HANDHOLD  
14. 4T-7460 [1] SUPPORT AS  
15. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
  1K-6872 [2] LOCKNUT (1/2-13-THD)  
16. 2B-2938 [2] PIN-CLEVIS  
  6S-6646 [2] PIN-COTTER  
17. 9W-9996 [1] BAR  
 

#SEBP19150429
 

7G-5719: PUMP GP-GEAR

7G-5719 PUMP GP-GEAR
S/N 8RC4000-UP; 1DD4000-UP
1 SECTION
PART OF 7G-5720 PUMP GP-GEAR
AN ATTACHMENT
i00399025 SEBP1915
7G5719 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9G-2807 [1] BODY AS-OIL PUMP  
2. 8M-8489 [2] DOWEL  
3. 2S-7931 [2] BEARING  
4. 2P-3537 [1] COVER AS-OIL PUMP  
5. 8M-8489 [2] DOWEL  
6. 2S-7931 [2] BEARING  
7. 7S-3029 [1] SEAL-LIP TYPE  
8. 5P-0076 [4] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
9. 4M-0189 [1] SEAL-O-RING  
10. 9G-2805 [1] GEAR AS-PUMP (8 TEETH)  
11. 7G-5710 [1] GEAR AS-PUMP (8 TEETH)  
12. 3V-2431 [4] WASHER (10.2X16X2-MM THK)  
 

Information:

Caterpillar Parts SIS Catalog D5H :

LINES GP-TILT CYLINDER
8G-4356 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
8G-4356 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
4T-2163 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
1U-3080 LINES GP-TILT CYLINDER
LINES GP-RIPPER
8G-4437 LINES GP-RIPPER
LINES GP-RIPPER
4T-2412 LINES GP-RIPPER
LINES GP-RIPPER
3W-2590 LINES GP-RIPPER
LINES GP-RIPPER
3A-8610 LINES GP-RIPPER
LINES GP-TILT CYLINDER
8G-7711 LINES GP-TILT CYLINDER
LINES GP-WINCH
6Y-7232 LINES GP-WINCH
LINES GP-WINCH
8G-4449 LINES GP-WINCH
MOUNTING GP-CONTROL VALVE
8G-4478 MOUNTING GP-CONTROL VALVE
MOUNTING GP-CYLINDER
8E-6518 MOUNTING GP-CYLINDER
MOUNTING GP-CYLINDER
8E-6531 MOUNTING GP-CYLINDER
MOUNTING GP-CYLINDER
8G-4054 MOUNTING GP-CYLINDER
MOUNTING GP-CYLINDER
8G-4328 MOUNTING GP-CYLINDER

Truck sale:

CATERPILLAR D5H 1986
 
CATERPILLAR D5H 1986
- TRACK TYPE TRACTORS
FABICK CAT
 
 
CATERPILLAR D5H 1990
- TRACK TYPE TRACTORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
CATERPILLAR D5H 1989
 
CATERPILLAR D5H 1989
- TRACK TYPE TRACTORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
1991 CAT D5H
Call 
1991 CAT D5H

Chin Xing Agro Machinery PLT
Alor Star, KEDAH, Malaysia 06250
1992 CAT D5H
USD $39,500 
1992 CAT D5H

SOUTHWEST TRACTOR & PARTS
Atoka, Oklahoma
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.