AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9T9558 CYLINDER GP-TILT (CHG 00) 120.65 MM (4.75 IN.) BORE X 200 MM (7.88 IN.) STROKE BULLDOZER S/N 2AH1-UP,1YH1-UP,6SH1-UP,7AH1-UP PART OF 8E2223, 8E2224, 8E2225, 8E2226, 3A8421, 3A8440 ,3A8590 ,9U8234 BULLDOZER ARS. AN ATTACHMENT D5H


HYDRAULIC SYSTEM
CYLINDER GP

TRACK-TYPE TRACTOR D5H TRACK-TYPE TRACTOR 7NC
 D5H & D5H LGP SERIES II TRACTORS - DIRECT DRIVE 7NC04000-UP (MACHINE) POWERED BY 3304 ENGINE SEBP1918 D5H 7NC   (1985)

HYDRAULIC SYSTEM

CYLINDER GP
4T-2452 CYLINDER AR-TILT
4T-2162 CYLINDER AR-TILT
CYLINDER GP
9T-9558 CYLINDER GP
CYLINDER GP-TILT
4T-2613 CYLINDER GP-TILT
CYLINDER GP
4T-1089 CYLINDER GP
CYLINDER GP
4T-1089 CYLINDER GP
 

#SEBP19180440
 

9T-9558: CYLINDER GP

9T9558 CYLINDER GP-TILT (CHG 00)
120.65 MM (4.75 IN.) BORE X 200 MM (7.88 IN.) STROKE
BULLDOZER S/N 2AH1-UP,1YH1-UP,6SH1-UP,7AH1-UP
PART OF 8E2223, 8E2224, 8E2225, 8E2226, 3A8421, 3A8440 ,3A8590 ,9U8234
BULLDOZER ARS. AN ATTACHMENT
c625992 SEBP1918
9T9558 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-9597 [1] CYLINDER AS  
  1U-1730 [2] LUG  
  9J-0398 [2] BOSS  
  1S-3311 [1] RING-RETAINING  
  7J-1309 [1] BEARING  
2. 4T-1632 [1] PISTON  
3. 5P-1839 [1] BOLT-LOCKING  
4. 4K-0684 [1] WASHER-HARD (6MM THK)  
5. 4J-3342 [1] RING-WEAR  
6. 4T-8588 [1] SEAL AS  
7. 2J-3961 [1] RING-BACKUP  
8. 5J-8225 [1] SEAL-U-CUP (54.70MM ID)  
9. 8C-9134 [1] SEAL-LIP (57.15MM ID)  
10. 3G-3910 [1] CROWN  
11. 6E-1456 [1] ROD AS  
  9J-7964 [1] BEARING-SPHERICAL  
  1K-6985 [2] RING-RETAINING  
12. 9T-9563 [1] HEAD  
13. 8C-9125 [1] SEAL AS  
14. 5H-6734 [1] SEAL-O-RING (113.89MM ID)  
15. 8T-4958 [1] RING-WEAR  
16. 3B-8489 [2] FITTING-GREASE  
 

#SEBP19180441
 

4T-2613: CYLINDER GP-TILT

4T2613 CYLINDER GP-LIFT (CHGS V01-V03)
127 MM (5 IN.) BORE X 175 MM (6.89 IN.) STROKE
PART OF 4T2162, 4T2452 CYLINDER ARS-TILT, 6Y1478, 6Y1479 PUSH ARMS
AN ATTACHMENT
c716822 SEBP1918
4T2613 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-2629 [1] CYLINDER AS  
  4T-2632 [1] EYE  
  7J-9884 [1] BEARING  
2. 1J-2921 [1] BOLT  
3. 3S-6162 [1] WASHER-HARD (6MM THK)  
4. 8J-6163 [1] PISTON  
5. 4J-3420 [1] RING-WEAR  
6. 5J-5020 [1] SEAL AS  
7. 8J-6166 [1] CROWN  
8. 8C-3840 C [1] SEAL-LIP  
9. 4T-2634 [1] ROD AS  
10. 5J-0964 [1] SEAL-U-CUP  
11. 2K-4096 [1] RING  
12. 5F-3144 [1] SEAL-O-RING (120.24MM ID)  
13. 8C-3839 C [1] SEAL AS  
14. 9T-6549 C [1] HEAD  
15. 7X-0372 [4] BOLT (3/4 X 10 X 4.25IN)  
  2J-3506 [4] NUT-FULL (3/4-10 THD)  
16. 4J-0121 [1] CAP-BEARING  
17. 8E-5703 B [20] SHIM (0.8MM THK)  
18. 8T-8394 C [1] RING-WEAR  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-1375 [1] KIT-SEAL (INCL SEALS & RINGS)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19180442
 

4T-1089: CYLINDER GP

4T1089 CYLINDER GP-LIFT (CHG 01)
2 REQUIRED. 95.25MM (3.75 IN.) BORE X 625MM (24.61 IN.) STROKE
TYPE 1. S/N 7NC4000-UP, BULLDOZER S/N 2BH1-UP
PART OF 6Y1734 BULLDOZER AR
ALSO AN ATTACHMENT
c523268 SEBP1918
4T1089 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-1088 [1] CYLINDER AS  
2. 1K-6985 [2] RING-RETAINING  
3. 9J-7964 [1] BEARING-SPHERICAL  
4. 8J-1196 [1] LUG  
5. 5P-8250 [1] WASHER  
6. 8J-6245 [1] RING-WEAR  
7. 5J-8011 [1] SEAL AS  
8. 8J-6016 [1] PISTON  
9. 8J-6020 [1] CROWN  
10. 3J-6572 B [12] SHIM .5MM(.02IN)THK  
11. 4J-3515 [1] SEAL-LIP TYPE  
12. 5J-8225 [1] SEAL-U-CUP  
13. 5J-3616 [1] SEAL-RING  
14. 1S-0669 [1] RING (BACK-UP)  
15. 2H-4145 [1] SEAL-O-RING  
16. 8J-6019 [1] HEAD  
17. 4T-1085 [1] ROD AS  
18. 3K-3318 [4] BOLT  
19. 2J-3506 [4] NUT-FULL  
20. 4J-0121 [1] CAP-BEARING  
21. 7J-5639 [1] BOLT-SELF LOCKING  
   
   
   
   
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-1473 [1] KIT-HYD CYLINDER SEAL  
    (INCL RINGS & SEALS)
  B   USE AS REQUIRED
 

#SEBP19180443
 

4T-1089: CYLINDER GP

4T1089 CYLINDER GP-LIFT (CHGS 02, 03)
2 REQUIRED. 95.25M (3.75 IN.) BORE X 625MM (24.61 IN.) STROKE
TYPE 2. S/N 7NC4000-UP, BULLDOZER S/N 2BH1-UP
PART OF 6Y1734 BULLDOZER AR
ALSO AN ATTACHMENT
c716772 SEBP1918
4T1089 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-1088 [1] CYLINDER AS  
2. 1K-6985 [2] RING-RETAINING  
3. 9J-7964 [1] BEARING-SPHERICAL  
4. 8J-1196 [1] LUG (3/8-16 THD)  
5. 5P-8250 [1] WASHER (5.0MM THK)  
6. 8J-6245 [1] RING-WEAR  
7. 5J-8011 [1] SEAL AS  
8. 8J-6016 [1] PISTON  
9. 8J-6020 [1] CROWN  
10. 8E-5703 B [16] SHIM (0.8MM THK)  
11. 8C-9134 C [1] SEAL-LIP (57.15MM ID)  
12. 5J-8225 [1] SEAL-U-CUP (54.70MM ID)  
13. 8C-9125 C [1] SEAL AS  
14. 1S-0669 [1] RING (BACK-UP)  
15. 2H-4145 [1] SEAL-O-RING (88.49MM ID)  
16. 6E-1410 C [1] HEAD  
17. 4T-1085 [1] ROD AS  
18. 7X-0372 C [4] BOLT (3/4 X 10 X 4.25IN)  
19. 2J-3506 [4] NUT-FULL (3/4-10 THD)  
20. 4J-0121 [1] CAP-BEARING  
21. 7J-5639 [1] BOLT-LOCKING (1-14X2.5IN)  
22. 8T-4958 C [1] RING-WEAR  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19180444
 

9T-9273: CYLINDER GP-ANGLE

9T9273 CYLINDER GP-ANGLE (CHGS 01-04)
2 REQUIRED. 102 MM (4.02 IN.) BORE X 450 MM (17.72 IN.) STROKE
BULLDOZER S/N 2AH1-UP,1YH1-UP,6SH1-UP,7AH1-UP
PART OF 8E2223, 8E2225, 3A8421, 3A8440, 3A8590, 9U8234
BULLDOZER ARS.-AN ATTACHMENT
c626384 SEBP1918
9T9273 CYLINDER GP-ANGLE Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-5790 [1] PISTON AS  
2. 6J-2797 [1] RING-WEAR  
3. 5J-5402 [1] SEAL AS  
  112-6142 [1] PLUNGER  
  8N-5083 [1] SPRING  
4. 9T-9258 C [1] HEAD  
5. 109-5792 RC [1] ROD AS  
6. 7J-9884 [1] BEARING  
7. 7J-6461 [1] CROWN  
8. 8C-9133 [1] SEAL  
9. 5J-8200 [1] SEAL-U-CUP  
10. 8C-9124 [1] SEAL AS (50.8MM ID)  
11. 2K-6830 [1] RING-BACKUP  
12. 1H-8128 [1] SEAL-O-RING (94.84MM ID)  
13. 4T-1665 R [1] CYLINDER AS  
  9J-0398 [1] BOSS  
14. 1K-6985 [2] RING-RETAINING  
15. 9J-7964 [1] BEARING-SPHERICAL  
16. 1J-2175 [1] BOLT (1 1/8-7X3.5IN)  
17. 110-6501 [1] WASHER-HARD  
18. 4T-5613 [1] RING-WEAR  
19. 8J-0484 [1] RING-RETAINING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP19180445
 

8G-4328: MOUNTING GP-CYLINDER

8G4328 MOUNTING GP-CYLINDER
S/N 7NC4000-UP, BULLDOZER S/N 2BH1-UP
PART OF 6Y1734 BULLDOZER AR
AN ATTACHMENT
c480833 SEBP1918
8G4328 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8917 [8] BOLT  
2. 4T-0231 [8] RETAINER  
3. 4T-7457 [2] LINK AS  
4. 3G-8917 [2] PIN  
5. 8G-5501 [1] GRAB HANDLE-RH  
6. 5P-2228 [4] BOLT  
7. 8T-4223 [12] WASHER  
8. 3G-8900 [4] PIN  
9. 4T-7459 [1] SUPPORT AS-RH  
10. 8G-5428 [2] PIN  
11. 8G-5427 [2] BUSHING  
12. 3G-8891 [4] SPACER  
13. 8G-5502 [1] GRAB HANDLE-LH  
14. 4T-7460 [1] SUPPORT AS-LH  
15. 5P-2566 [2] BOLT  
  1K-6872 [2] LOCKNUT  
16. 2B-2938 [2] PIN-CLEVIS  
  6S-6646 [2] PIN  
17. 9W-9996 [1] BAR  
 

#SEBP19180446
 

8G-4054: MOUNTING GP-CYLINDER

8G4054 MOUNTING GP-CYLINDER
S/N 9HC4000-UP, BULLDOZER S/N 6FH1-UP
PART OF 8E2269 BULLDOZER AR-STRAIGHT-LGP
AN ATTACHMENT
c479159 SEBP1918
8G4054 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6522 [2] LINK AS  
2. 4T-0231 [8] RETAINER  
3. 5P-2228 [4] BOLT  
4. 8G-5502 J [1] GRAB HANDLE-LH  
5. 3G-8891 [4] SPACER  
6. 3G-8917 [2] PIN  
7. 8G-5501 L [1] GRAB HANDLE-RH  
8. 4T-6524 [1] SUPPORT AS-LH  
9. 8G-5427 [2] BUSHING  
10. 8G-5428 [2] PIN  
11. 4T-6523 [1] SUPPORT AS (RH)  
12. 8T-8917 [8] BOLT  
13. 3G-8900 [4] PIN  
14. 5P-2566 [2] BOLT  
15. 1K-6872 [2] LOCKNUT  
16. 2B-2938 [2] PIN-CLEVIS  
17. 6S-6646 [2] PIN  
18. 9W-9996 [1] BAR  
19. 8T-4223 [12] WASHER  
   
    J-ASSEMBLE LH HANDLE
    ON RH SIDE OF MACHINE
   
    L-ASSEMBLE RH HANDLE
    ON LH SIDE OF MACHINE
 

#SEBP19180447
 

8E-6531: MOUNTING GP-CYLINDER

8E6531 MOUNTING GP-CYLINDER
BULLDOZER S/N 2BH1-UP
PART OF 6Y1734 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
c537103 SEBP1918
8E6531 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8917 [6] BOLT  
2. 4T-0231 [6] RETAINER  
3. 4T-7457 [2] LINK AS  
4. 8E-6537 [2] PIN AS  
5. 8G-5501 [1] GRAB HANDLE-RH  
6. 5P-2228 [4] BOLT  
7. 8T-4223 [10] WASHER  
8. 8E-6523 [4] PIN  
9. 8E-6533 [1] SUPPORT AS-RH  
  1F-0748 [2] NUT  
  8P-9770 [1] PLATE  
10. 8G-5428 [2] PIN  
11. 8E-6526 [2] BUSHING  
12. 3G-8891 [4] SPACER  
13. 8G-5502 [1] GRAB HANDLE-LH  
14. 8E-6532 [1] SUPPORT AS-LH  
  1F-0748 [2] NUT  
  8P-9770 [1] PLATE  
15. 5P-2566 [2] BOLT  
  1K-6872 [2] LOCKNUT  
16. 2B-2938 [2] PIN-CLEVIS  
  6S-6646 [2] PIN  
17. 9W-9996 [2] BAR  
18. 3P-9111 [2] SPACER  
19. 7X-0381 [2] BOLT  
  6S-3931 [2] WASHER  
20. 4J-0805 B [30] WASHER  
  B   USE AS REQUIRED
 

#SEBP19180448
 

8E-6518: MOUNTING GP-CYLINDER

8E6518 MOUNTING GP-CYLINDER
BULLDOZER S/N 6FH1-UP
PART OF 8E2269 BULLDOZER AR
AN ATTACHMENT
c537930 SEBP1918
8E6518 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6522 [2] LINK AS  
2. 4T-0231 [6] RETAINER  
3. 5P-2228 [4] BOLT  
4. 8G-5502 J [1] GRAB HANDLE-LH  
5. 3G-8891 [4] SPACER  
6. 8E-6537 [2] PIN AS  
7. 8G-5501 L [1] GRAB HANDLE-RH  
8. 8E-6520 [1] SUPPORT AS-LH  
9. 8E-6526 [2] BUSHING  
10. 8G-5428 [2] PIN  
11. 8E-6519 [1] SUPPORT AS-RH  
12. 8T-8917 [6] BOLT  
13. 8E-6523 [4] PIN  
  4J-0805 B [30] WASHER  
14. 5P-2566 [2] BOLT  
15. 1K-6872 [2] LOCKNUT  
16. 2B-2938 [2] PIN-CLEVIS  
17. 6S-6646 [2] PIN  
18. 9W-9996 [2] BAR  
19. 8T-4223 [10] WASHER  
20. 7X-0381 [2] BOLT  
  6S-3931 [2] WASHER  
  3P-9111 [2] SPACER  
   
    J-ASSEMBLE LH HANDLE
    ON RH SIDE OF MACHINE
   
    L-ASSEMBLE RH HANDLE
    ON LH SIDE OF MACHINE
  B   USE AS REQUIRED
 

#SEBP19180449
 

3G-4879: CYLINDER & MOUNTING GP

3G4879 CYLINDER & MOUNTING GP
RIPPER S/N 2DH1-UP
3G5909-PAGE 251
PART OF 4T2413 RIPPER AR. AN ATTACHMENT
c488260 SEBP1918
3G4879 CYLINDER & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-0472 [2] BEARING  
2. 7K-9203 [8] SEAL-LIP TYPE  
3. 3G-1583 [2] PIN  
4. 1U-0064 [2] BEARING  
5. 1U-0063 [2] PIN  
6. 3G-5909 Y [2] CYLINDER GP  
7. 8T-9378 [4] BOLT  
8. 2K-4973 [4] LOCKNUT  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D5H :

4T-2162 CYLINDER AR-TILT
4T-2452 CYLINDER AR-TILT
MOUNTING GP-VALVE
8G-4478 MOUNTING GP-VALVE
3W-6997 WIRING GP-HYDRAULIC
VALVE GP-PRESS & FLOW CMPNSTR
9T-6757 VALVE GP-PRESS & FLOW CMPNSTR
ROTATING GP-PUMP
6E-6569 ROTATING GP-PUMP
VALVE GP-PRESS & FLOW CMPNSTR
6E-6568 VALVE GP-PRESS & FLOW CMPNSTR
PUMP GP-PISTON
6E-5052 PUMP GP-PISTON
CYLINDER GP-TILT
4T-2613 CYLINDER GP-TILT
CYLINDER GP
4T-1089 CYLINDER GP
CYLINDER GP
4T-1089 CYLINDER GP
CYLINDER GP-ANGLE
9T-9273 CYLINDER GP-ANGLE
MOUNTING GP-CYLINDER
8G-4328 MOUNTING GP-CYLINDER
MOUNTING GP-CYLINDER
8G-4054 MOUNTING GP-CYLINDER
MOUNTING GP-CYLINDER
8E-6531 MOUNTING GP-CYLINDER
MOUNTING GP-CYLINDER
8E-6518 MOUNTING GP-CYLINDER

Truck sale:

CATERPILLAR D5H 1986
 
CATERPILLAR D5H 1986
- TRACK TYPE TRACTORS
FABICK CAT
 
 
CATERPILLAR D5H 1990
- TRACK TYPE TRACTORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
CATERPILLAR D5H 1989
 
CATERPILLAR D5H 1989
- TRACK TYPE TRACTORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
1991 CAT D5H
Call 
1991 CAT D5H

Chin Xing Agro Machinery PLT
Alor Star, KEDAH, Malaysia 06250
1992 CAT D5H
USD $39,500 
1992 CAT D5H

SOUTHWEST TRACTOR & PARTS
Atoka, Oklahoma
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.