AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3G5909 CYLINDER GP-RIPPER (CHG 03) 102 MM (4 IN.) BORE X 451 MM (17.75 IN.) STROKE PART OF 3G4879 CYLINDER & MOUNTING AN ATTACHMENT D5H


HYDRAULIC SYSTEM
CYLINDER GP
IMPLEMENTS
BULLDOZER GP

TRACK-TYPE TRACTOR D5H TRACK-TYPE TRACTOR 7NC
 D5H & D5H LGP SERIES II TRACTORS - DIRECT DRIVE 7NC04000-UP (MACHINE) POWERED BY 3304 ENGINE SEBP1918 D5H 7NC   (1985)

HYDRAULIC SYSTEM

CYLINDER GP
MOUNTING GP-CYLINDER
8E-6518 MOUNTING GP-CYLINDER
CYLINDER & MOUNTING GP
3G-4879 CYLINDER & MOUNTING GP
CYLINDER GP
3G-5909 CYLINDER GP
CYLINDER GP-RIPPER LIFT
9T-2716 CYLINDER GP-RIPPER LIFT
CYLINDER GP
4T-1659 CYLINDER GP
CYLINDER GP
4T-1659 CYLINDER GP
 

#SEBP19180450
 

3G-5909: CYLINDER GP

3G5909 CYLINDER GP-RIPPER (CHG 03)
102 MM (4 IN.) BORE X 451 MM (17.75 IN.) STROKE
PART OF 3G4879 CYLINDER & MOUNTING
AN ATTACHMENT
c614658 SEBP1918
3G5909 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-6214 [1] PLUG-PIPE  
2. 6J-2797 [1] RING-WEAR  
3. 5J-5402 [1] SEAL AS  
4. 7J-6469 [1] PISTON  
5. 3G-6533 [1] CYLINDER AS  
6. 8C-9124 C [1] SEAL AS (50.8MM ID)  
7. 5J-8200 [1] SEAL-U-CUP  
8. 7J-6461 [1] CROWN  
9. 3G-6895 [1] ROD AS  
10. 8C-9133 C [1] SEAL  
11. 2K-6830 [1] RING-BACKUP  
12. 1H-8128 [1] SEAL-O-RING (94.84MM ID)  
13. 9T-9258 C [1] HEAD  
14. 8J-7415 [1] WASHER-HARD  
15. 7J-5639 [1] BOLT-LOCKING (1-14 X 2.5IN)  
16. 4T-5613 C [1] RING-WEAR  
17. 8J-0484 [1] RING-RETAINING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19180451
 

9T-2716: CYLINDER GP-RIPPER LIFT

9T2716 CYLINDER GP-RIPPER LIFT (CHGS N01-N02)
127MM(5 IN.)BORE X 362MM(14.25 IN.)STROKE. RIPPER S/N 6YH1-UP
PART OF 3A8606 RIPPER AR
AN ATTACHMENT
c594171 SEBP1918
9T2716 CYLINDER GP-RIPPER LIFT Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-1753 [1] PISTON  
2. 4J-3420 [1] RING-WEAR  
3. 5J-5020 [1] SEAL AS  
4. 9T-2715 [1] CYLINDER AS  
5. 4K-3128 [2] BEARING-SLEEVE  
6. 9T-6863 C [1] HEAD  
7. 8C-3839 [1] SEAL AS  
8. 5J-0964 [1] SEAL-U-CUP  
9. 8C-3840 [1] SEAL-LIP  
10. 9T-2714 [1] ROD AS  
11. 2K-4507 [1] BEARING-SLEEVE  
12. 1D-4628 [4] BOLT  
  5P-8249 [4] WASHER  
13. 2K-4096 [1] RING  
14. 5F-3144 [1] SEAL-O-RING  
15. 3G-1757 [1] WASHER  
16. 2J-0564 [1] LOCKNUT  
17. 8T-5668 C [1] RING-WEAR  
18. 1P-4576 [4] FLANGE  
19. 4J-5267 [2] SEAL  
  5H-4018 [2] COVER  
20. 8T-4896 [8] WASHER-HARD  
  9B-7237 [8] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19180452
 

4T-1659: CYLINDER GP

4T1659 CYLINDER GP-LIFT (CHANGE 03)
114.3 MM (4.50 IN.) BORE X 435 MM (17.13 IN.) STROKE. 2 REQUIRED
TYPE 1. BULLDOZER S/N 2AH1-UP,1YH1-UP
PART OF 8E2223, 8E2225, 3A8421, 3A8440 BULLDOZER ARS
AN ATTACHMENT
c510063 SEBP1918
4T1659 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-8425 CR [1] CYLINDER AS  
  9T-8424 [1] BEARING-SLEEVE  
2. 8F-9836 [2] LUG  
3. 5J-4986 [1] SEAL AS  
4. 8J-5549 [1] PISTON  
5. 4T-1655 [1] CROWN  
6. 8J-5551 [1] HEAD  
7. 4J-3515 [1] SEAL-LIP TYPE  
8. 9T-8426 CR [1] ROD AS  
  9T-8424 [1] BEARING-SLEEVE  
9. 5J-8225 [1] SEAL-U-CUP  
10. 1K-7095 [1] RING-BACK-UP  
11. 5J-3616 [1] SEAL-RING  
12. 4K-0684 [1] WASHER-HARD  
13. 6V-5599 [1] BOLT-LOCKING  
14. 4J-3745 [1] RING-WEAR  
15. 2H-3928 [1] SEAL-O-RING  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-1396 [1] KIT-SEAL  
    (INCL. RINGS & SEALS)
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP19180453
 

4T-1659: CYLINDER GP

4T1659 CYLINDER GP-LIFT (CHG 05)
114.3 MM (4.50 IN.) BORE X 435 MM (17.13 IN.) STROKE. 2 REQUIRED
TYPE 2. BULLDOZER S/N 2AH1-UP,1YH1-UP,6SH1-UP
PART OF 8E2223, 8E2225, 3A8421, 3A8440, 3A8590 BULLDOZER ARS
AN ATTACHMENT
c502593 SEBP1918
4T1659 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-8425 R [1] CYLINDER AS  
  9T-8424 [1] BEARING-SLEEVE  
2. 8F-9836 [2] LUG  
3. 5J-4986 [1] SEAL AS  
4. 8J-5549 [1] PISTON  
5. 4T-1655 [1] CROWN  
6. 9T-9257 C [1] HEAD  
7. 8C-9134 C [1] SEAL-LIP TYPE  
8. 9T-8426 R [1] ROD AS  
  9T-8424 [1] BEARING-SLEEVE  
9. 5J-8225 [1] SEAL-U-CUP  
10. 1K-7095 [1] RING-BACK-UP  
11. 8C-9125 C [1] SEAL AS  
12. 4K-0684 [1] WASHER-HARD  
13. 6V-5599 [1] BOLT-LOCKING  
14. 4J-3745 [1] RING-WEAR  
15. 2H-3928 [1] SEAL-O-RING  
16. 8T-4958 C [1] RING-WEAR  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-1396 [1] KIT-SEAL  
    (INCL RINGS & SEALS)
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP19180454
 

6E-5400: CYLINDER GP

6E5400 CYLINDER GP-2 REQUIRED (CHG N01)
114.3 MM (4.5 IN) BORE X 435 MM (17.1 IN) STROKE-LIFT
BULLDOZER S/N 1YH1-UP,7AH1-UP,6SH1-UP
PART OF 8E2225,9U8234, 3A8590 BULLDOZERS-POWER ANGLE & TILT-LGP
AN ATTACHMENT
c594205 SEBP1918
6E5400 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-5450 [1] ROD AS  
2. 6E-5449 [1] BEARING  
3. 8C-9134 [1] SEAL-LIP  
4. 5J-8225 [1] SEAL-U-CUP  
5. 8C-9125 [1] SEAL AS  
6. 8T-4958 [1] RING-WEAR  
7. 6E-3570 [1] HEAD  
8. 1K-7095 [1] RING-BACKUP  
9. 5H-6734 [1] SEAL-O-RING  
10. 6E-3569 [1] PISTON  
11. 9X-7269 [1] SEAL AS  
12. 4J-3745 [1] RING-WEAR  
13. 3S-7023 [1] WASHER  
14. 8C-3411 M [1] BOLT  
15. 6E-5401 [1] CYLINDER AS  
  4D-9376 [2] BOSS  
16. 6E-5449 [1] BEARING  
17. 2R-1236 [1] RING-RETAINING  
  M   METRIC PART
 

#SEBP19180455
 

1U-1839: CYLINDER GP-LIFT

1U1839 CYLINDER GP-LIFT (CHG 04)
95.25 MM (3.75 IN.) BORE X 700 MM (27.55 IN.) STROKE. 2 REQUIRED
TYPE 1. S/N 9HC4000-UP, BULLDOZER S/N 6FH1-UP
PART OF 8E2269 BULLDOZER AR
AN ATTACHMENT
c523277 SEBP1918
1U1839 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-1838 [1] CYLINDER AS  
2. 1K-6985 [2] RING-RETAINING  
3. 9J-7964 [1] BEARING-SPHERICAL  
4. 7J-5639 [1] BOLT-SELF LOCKING  
5. 5P-8250 [1] WASHER  
6. 8J-6245 [1] RING-WEAR  
7. 5J-8011 [1] SEAL AS  
8. 8J-6016 [1] PISTON  
9. 8J-6020 [1] CROWN  
10. 3J-6572 B [12] SHIM .5MM(.02IN)THK  
11. 4J-3515 [1] SEAL-LIP TYPE  
12. 5J-8225 [1] SEAL-U-CUP  
13. 5J-3616 [1] SEAL-RING  
14. 1S-0669 [1] RING (BACK-UP)  
15. 2H-4145 [1] SEAL-O-RING  
16. 8J-6019 [1] HEAD  
17. 1U-1836 [1] ROD AS  
18. 3K-3318 [4] BOLT  
19. 2J-3506 [4] NUT-FULL  
20. 4J-0121 [1] CAP-BEARING  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-1473 [1] KIT-HYD CYLINDER SEAL  
    (INCL RINGS & SEALS)
  B   USE AS REQUIRED
 

#SEBP19180456
 

1U-1839: CYLINDER GP-LIFT

1U1839 CYLINDER GP-LIFT (CHG 05, 06)
95.25 MM (3.75 IN.) BORE X 700 MM (27.55 IN.) STROKE. 2 REQUIRED
TYPE 2. S/N 9HC4000-UP, BULLDOZER S/N 6FH1-UP
PART OF 8E2269 BULLDOZER AR
AN ATTACHMENT
c523281 SEBP1918
1U1839 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-1838 [1] CYLINDER AS  
2. 1K-6985 [2] RING-RETAINING  
3. 9J-7964 [1] BEARING-SPHERICAL  
4. 7J-5639 [1] BOLT-SELF LOCKING  
5. 5P-8250 [1] WASHER  
6. 8J-6245 [1] RING-WEAR  
7. 5J-8011 [1] SEAL AS  
8. 8J-6016 [1] PISTON  
9. 8J-6020 [1] CROWN  
10. 3J-6572 B [12] SHIM .5MM(.02IN)THK  
11. 8C-9134 C [1] SEAL-LIP TYPE  
12. 5J-8225 [1] SEAL-U-CUP  
13. 8C-9125 C [1] SEAL AS  
14. 1S-0669 [1] RING (BACK-UP)  
15. 2H-4145 [1] SEAL-O-RING  
16. 8J-6019 [1] HEAD  
17. 1U-1836 [1] ROD AS  
18. 7X-0372 C [4] BOLT  
19. 2J-3506 [4] NUT-FULL  
20. 4J-0121 [1] CAP-BEARING  
21. 8T-4958 C [1] RING-WEAR  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-1473 [1] KIT-HYD CYLINDER SEAL  
    (INCL RINGS & SEALS)
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19180457
 

9U-8234: BULLDOZER AR

9U8234 BULLDOZER AR-POWER ANGLE & TILT
BULLDOZER S/N 7AH1-UP
AN ATTACHMENT
SEBP19180457 SEBP1918
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  8E-9494 Y [1] BLADE GP-ANGLING  
   
  6Y-6135 Y [1] C-FRAME GP  
  6E-5400 Y [2] CYLINDER GP  
  9T-9558 Y [1] CYLINDER GP  
  9T-9273 Y [2] CYLINDER GP-ANGLE  
   
  4T-1839 Y [1] LINES GP-ANGLE & TILT  
   
  3G-8919 Y [1] PIN GP  
   
  8E-2796 Y [1] SINGLETREE GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19180458
 

6Y-1735: BULLDOZER AR-STRAIGHT

6Y1735 BULLDOZER AR-STRAIGHT
BULLDOZER S/N 2BH1-UP
AN ATTACHMENT
SEBP19180458 SEBP1918
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  4T-2159 Y [1] BLADE GP-STRAIGHT  
  4T-2163 Y [1] LINES GP-TILT CYLINDER  
  6Y-1478 Y [1] PUSH ARM GP  
  1U-4433 Y [1] TRUNNION GP  
  8T-7371 [1] PLATE-SERIAL NUMBER  
    BACK OF MOLDBOARD-NEAR TOP AT RH END
  4B-4158 [2] SCREW-DRIVE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19180459
 

8E-2223: BULLDOZER AR-ANGLING

8E2223 BULLDOZER AR-POWER ANGLE & TILT
BULLDOZER S/N 2AH1-UP
AN ATTACHMENT
SEBP19180459 SEBP1918
  For full view, you need register

Parts for your D5H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
   
  6Y-6130 Y [1] BLADE GP-ANGLING  
  4T-1659 Y [2] CYLINDER GP  
  9T-9558 Y [1] CYLINDER GP  
  9T-9273 Y [2] CYLINDER GP-ANGLE  
  6Y-6135 Y [1] FRAME GP-C POWER  
  4T-1839 Y [1] LINES GP-ANGLE & TILT  
  3G-8919 Y [1] PIN GP  
  8E-2796 Y [1] SINGLETREE GP  
  8T-7371 [1] PLATE-SERIAL NUMBER  
  4B-4158 [2] SCREW-DRIVE  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D5H :

CYLINDER & MOUNTING GP
3G-4879 CYLINDER & MOUNTING GP
MOUNTING GP-CYLINDER
8E-6518 MOUNTING GP-CYLINDER
MOUNTING GP-CYLINDER
8E-6531 MOUNTING GP-CYLINDER
MOUNTING GP-CYLINDER
8G-4054 MOUNTING GP-CYLINDER
MOUNTING GP-CYLINDER
8G-4328 MOUNTING GP-CYLINDER
CYLINDER GP-ANGLE
9T-9273 CYLINDER GP-ANGLE
CYLINDER GP
4T-1089 CYLINDER GP
CYLINDER GP
4T-1089 CYLINDER GP
CYLINDER GP-RIPPER LIFT
9T-2716 CYLINDER GP-RIPPER LIFT
CYLINDER GP
4T-1659 CYLINDER GP
CYLINDER GP
4T-1659 CYLINDER GP
CYLINDER GP
6E-5400 CYLINDER GP
CYLINDER GP-LIFT
1U-1839 CYLINDER GP-LIFT
CYLINDER GP-LIFT
1U-1839 CYLINDER GP-LIFT
9U-8234 BULLDOZER AR
6Y-1735 BULLDOZER AR-STRAIGHT

Truck sale:

CATERPILLAR D5H 1986
 
CATERPILLAR D5H 1986
- TRACK TYPE TRACTORS
FABICK CAT
 
 
CATERPILLAR D5H 1990
- TRACK TYPE TRACTORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
CATERPILLAR D5H 1989
 
CATERPILLAR D5H 1989
- TRACK TYPE TRACTORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
1991 CAT D5H
Call 
1991 CAT D5H

Chin Xing Agro Machinery PLT
Alor Star, KEDAH, Malaysia 06250
1992 CAT D5H
USD $39,500 
1992 CAT D5H

SOUTHWEST TRACTOR & PARTS
Atoka, Oklahoma
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.