FRAME AND BODY
CASE & FRAME GPCOUNTERWEIGHT GP
DRAWBAR GP
ENCLOSURE GP
FENDER GP
FRAME AND BODY
CASE & FRAME GP
#SEBP19190250
8E-2474: CASE & FRAME GP
For full view, you need register
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3T-0996 | [2] | BUSHING | |
| 2. | 3T-0997 | [2] | BUSHING | |
| 3. | 1J-8668 | [2] | STUD-TAPERLOCK (3/8-16X1.97-IN) | |
| 4. | 4T-2069 | [1] | PLUG-DRAIN | |
| 5. | 8E-2475 | [1] | CASE & FRAME AS | |
| 6. | 5H-9394 | [4] | BOSS (1/2-13X1-IN) | |
| 7. | 9F-2978 | [8] | NUT-WELD (3/8-16-THD) | |
| 8. | 8G-4386 | [14] | SLEEVE | |
| 9. | 8D-3508 | [9] | BOSS (3/8-16X1-IN) | |
| 10. | 8F-9836 | [8] | BOSS (3/8-16-THD) | |
| 11. | 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | |
| 12. | 3R-0451 | [1] | BOSS (3/8-16-THD) | |
| 13. | 4B-3572 | [1] | SETSCREW | |
| 14. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 15. | 1S-2067 | [2] | CLIP | |
| 16. | 1S-3618 | [1] | CLIP | |
| 17. | 4L-6454 | [3] | BOLT (3/8-16X1-IN) | |
| 18. | 5M-3062 | [2] | BOLT (3/8-16X0.75-IN) | |
| 19. | 5P-1075 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 20. | 5R-0939 | [1] | CLIP (TAB) | |
| 21. | 5R-0940 | [2] | CLIP (SLOT) | |
| 22. | 6L-3351 | [1] | CLIP-TUBE |
#SEBP19190251
6Y-5237: COUNTERWEIGHT GP
For full view, you need register
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6Y-5238 | [1] | COUNTERWEIGHT | |
| 2. | 9M-9649 | [8] | STUD-TAPERLOCK | |
| 6V-8190 | [8] | NUT (1-8-THD) | ||
| 3. | 8T-5361 | [12] | WASHER-HARD (28X49X5-MM THK) | |
| 4. | 7X-0408 | [4] | BOLT (1-8X3.5-IN) | |
| 5. | 6Y-5239 | [1] | BRACKET AS | |
| 6. | 2R-0179 | [1] | PIN AS-HEADLESS | |
| 7. | 7B-0863 | [1] | LATCH-PIN | |
| 8. | 5P-2424 | [1] | BOLT (1/2-13X2.25-IN) | |
| 1K-6872 | [1] | LOCKNUT (1/2-13-THD) | ||
| -OR- | ||||
| 7X-0349 | [1] | BOLT (5/8-11X3-IN) | ||
| 3K-2889 | [1] | LOCKNUT (5/8-11-THD) | ||
#SEBP19190252
3W-6866: DRAWBAR GP
3W-6866 DRAWBAR GP
S/N 1FJ4000-UP
LONG
CANNOT BE USED WITH RIPPER AR, WINCH AR, STRIKER GP-REAR
AN ATTACHMENT
S/N 1FJ4000-UP
LONG
CANNOT BE USED WITH RIPPER AR, WINCH AR, STRIKER GP-REAR
AN ATTACHMENT
For full view, you need register
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-6867 | [1] | DRAWBAR AS | |
| 2. | 7B-0863 | [1] | LATCH-PIN | |
| 3. | 7F-9547 | [1] | PIN AS-DRAWBAR | |
| 7F-9543 | [1] | COLLAR | ||
| 4. | 7X-7644 | [1] | FILM-IDENTIFICATION (TIE-DOWN) | |
| 5. | 356-2197 | [1] | FILM-INFORMATION (DRAWBAR, READ OMM) | |
| 6. | 5D-3118 | [10] | STUD-TAPERLOCK (1-8-THD) | |
| 7. | 6V-8190 | [10] | NUT (1-8-THD) | |
| 8. | 8T-4140 M | [1] | BOLT (M16X2X60-MM) | |
| 9. | 8T-4778 M | [1] | LOCKNUT (M16X2-THD) | |
| 10. | 299-3426 | [10] | WASHER-HARD (28X49X6-MM THK) | |
| 11. | 7X-1456 | [16] | PLUG | |
| M | METRIC PART | |||
#SEBP19190253
7G-7441: DRAWBAR GP
For full view, you need register
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4122 | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 2. | 8T-9399 | [6] | BOLT (3/4-10X2.25-IN) | |
| 3. | 7X-0611 | [6] | WASHER-HARD (20X32X3-MM THK) | |
| 4. | 7F-9547 | [2] | PIN AS-DRAWBAR | |
| (EACH INCLUDES) | ||||
| 7F-9543 | [1] | COLLAR | ||
| 5. | 5D-3118 | [10] | STUD-TAPERLOCK (1-8-THD) | |
| 6. | 6V-8190 | [10] | NUT (1-8-THD) | |
| 7. | 8T-5361 | [14] | WASHER-HARD (28X49X5-MM THK) | |
| 8. | 3W-2287 | [1] | BRACKET AS | |
| 9. | 7X-0404 | [4] | BOLT (1-8X2.5-IN) | |
| 10. | 7X-3193 | [2] | BOLT (5/8-18X3.25-IN) | |
| 11. | 2K-4821 | [2] | LOCKNUT (5/8-18-THD) | |
| 12. | 5M-9508 | [1] | BRACKET-FULCRUM | |
| 13. | 3W-2277 | [1] | DRAWBAR AS | |
| 14. | 7B-0863 | [2] | LATCH-PIN | |
| 15. | 3W-2286 | [1] | PLATE | |
| 16. | 3W-2294 | [1] | BRACKET AS | |
| 17. | 3W-2273 | [1] | BRACKET AS | |
| 18. | 5M-9509 | [1] | PIN-FULCRUM | |
| 19. | 3B-9805 | [2] | SCREW-LOCK | |
#SEBP19190254
7G-8975: DRAWBAR GP
For full view, you need register
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-2182 | [1] | DRAWBAR AS | |
| 1P-1547 | [1] | PLATE-LOCK | ||
| 2. | 7B-0863 | [1] | LATCH-PIN | |
| 3. | 7F-9547 | [1] | PIN AS-DRAWBAR | |
| 7F-9543 | [1] | COLLAR | ||
| 4. | 7X-7644 | [1] | FILM-IDENTIFICATION (TIE-DOWN) | |
| 5. | 356-2197 | [1] | FILM-INFORMATION (DRAWBAR, READ OMM) | |
| 6. | 5D-3118 | [10] | STUD-TAPERLOCK (1-8-THD) | |
| 7. | 299-3423 | [10] | NUT (1-8-THD) | |
| 8. | 8T-4140 M | [1] | BOLT (M16X2X60-MM) | |
| 9. | 8T-4778 M | [1] | LOCKNUT (M16X2-THD) | |
| 10. | 8T-5361 | [10] | WASHER-HARD (28X49X5-MM THK) | |
| 11. | 7X-1456 | [16] | PLUG | |
| M | METRIC PART | |||
#SEBP19190255
7G-5550: ENCLOSURE GP-ENGINE
For full view, you need register
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-8309 BD | SEAL | ||
| 2. | 3W-9209 | [2] | BRACKET AS | |
| 3. | 8E-3070 | [1] | PLATE | |
| 4. | 5P-1075 C | [38] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 5. | 6J-0488 | [4] | SCREW-BUTTON HEAD (3/8-16X0.875-IN) | |
| 6. | 8E-4832 | [2] | STRIKER | |
| 7. | 5S-7382 | [4] | BOLT (3/8-16X1.375-IN) | |
| 8. | 8T-5391 C | [2] | BOLT (5/16-18X0.5-IN) | |
| 9. | 7X-0579 C | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 10. | 3W-4979 | [2] | ROD AS | |
| 11. | 5P-0372 | [2] | LOCK PIN | |
| 12. | 6Y-4252 C | [2] | DOOR AS | |
| (EACH INCLUDES) | ||||
| 8G-7723 | [2] | SPACER (13.8X21.3X10-MM THK) | ||
| 9M-5732 | [12] | RIVET-POP | ||
| 9M-2307 | [12] | WASHER (5.2X19X2-MM THK) | ||
| 13. | 6Y-4214 C | [4] | HINGE | |
| 14. | 7X-0575 | [16] | WASHER-HARD (10.2X22.5X5-MM THK) | |
| 15. | 6Y-2588 C | [1] | SEAL | |
| 16. | 5M-3062 CB | [2] | BOLT (3/8-16X0.75-IN) | |
| 5P-1075 B | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 17. | 7X-2501 C | [2] | BOLT (1/4-20X1.25-IN) | |
| 18. | 5S-7379 | [8] | BOLT (3/8-16X0.875-IN) | |
| 19. | 8T-4205 | [5] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 20. | 9W-8939 | [2] | PLATE AS | |
| 21. | 5M-3062 | [22] | BOLT (3/8-16X0.75-IN) | |
| 22. | 3W-2430 | [1] | SUPPORT AS (RH) | |
| 3W-2435 | [1] | SUPPORT AS (LH) | ||
| 23. | 2D-6235 | [3] | LOCKNUT (1/4-20-THD) | |
| 24. | 8E-3072 | [1] | PLATE AS | |
| 3H-5366 | [1] | STUD-WELD (1/4-20X0.625-IN) | ||
| 25. | 8T-9496 | [4] | LOCKNUT (9/16-18-THD) | |
| 26. | 2K-4973 | [4] | LOCKNUT (3/8-16-THD) | |
| 27. | 3W-9208 | [2] | PAWL | |
| 28. | 3W-9207 | [2] | GUIDE | |
| 29. | 8C-6500 | [2] | LATCH AS | |
| (EACH INCLUDES) | ||||
| 8C-6822 | [1] | HANDLE-LATCH | ||
| 30. | 8C-6824 | [1] | BRACKET-LATCH | |
| 31. | 8C-6823 | [1] | SHAFT-LATCH | |
| 32. | 7X-0766 | [1] | SPRING-LATCH | |
| 33. | 8Y-3966 | [1] | WASHER (14.7X35X1.57-MM THK) | |
| 34. | 6H-3956 | [1] | PIN | |
| 35. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
| 36. | 6V-1193 | [8] | SCREW-HEX SOCKET (3/8-16X0.625-IN) | |
| 37. | 6V-8801 | [4] | NUT (3/8-16-THD) | |
| 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 38. | 5P-8502 | [2] | PADLOCK GP | |
| (EACH INCLUDES) | ||||
| 8Y-6364 A | [1] | SLEEVE | ||
| 5P-8500 A | [2] | KEY | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
#SEBP19190256
7G-5550: ENCLOSURE GP-ENGINE
For full view, you need register
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-8309 BD | SEAL | ||
| 2. | 3W-9209 | [2] | BRACKET AS | |
| 3. | 8E-3070 | [1] | PLATE | |
| 4. | 5P-1075 C | [36] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 5. | 6J-0488 | [4] | SCREW-BUTTON HEAD (3/8-16X0.875-IN) | |
| 6. | 8E-4832 | [2] | STRIKER | |
| 7. | 5S-7382 | [4] | BOLT (3/8-16X1.375-IN) | |
| 8. | 7X-3392 C | [2] | WASHER-HARD (13.5X22.5X3-MM THK) | |
| 9. | 6V-8801 | [4] | NUT (3/8-16-THD) | |
| 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 10. | 6V-1193 | [8] | SCREW-HEX SOCKET (3/8-16X0.625-IN) | |
| 11. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
| 12. | 6Y-4252 | [2] | DOOR AS | |
| (EACH INCLUDES) | ||||
| 8G-7723 | [2] | SPACER (13.8X21.3X10-MM THK) | ||
| 9M-5732 | [12] | RIVET-POP | ||
| 9M-2307 | [12] | WASHER (5.2X19X2-MM THK) | ||
| 13. | 6Y-4214 | [4] | HINGE | |
| 14. | 3W-9207 | [2] | GUIDE | |
| 15. | 5P-8502 | [2] | PADLOCK GP | |
| (EACH INCLUDES) | ||||
| 8Y-6364 CA | [1] | SLEEVE | ||
| 5P-8500 CA | [1] | KEY | ||
| 16. | 5M-3062 B | [2] | BOLT (3/8-16X0.75-IN) | |
| 5P-1075 B | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 17. | 7X-2501 | [2] | BOLT (1/4-20X1.25-IN) | |
| 18. | 5S-7379 | [8] | BOLT (3/8-16X0.875-IN) | |
| 19. | 8T-4205 | [5] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 20. | 9W-8940 C | [2] | PLATE | |
| 21. | 5M-3062 | [20] | BOLT (3/8-16X0.75-IN) | |
| 22. | 3W-2430 | [1] | SUPPORT AS (RH) | |
| 3W-2435 | [1] | SUPPORT AS (LH) | ||
| 23. | 2D-6235 | [3] | LOCKNUT (1/4-20-THD) | |
| 24. | 8E-3072 | [1] | PLATE AS | |
| 25. | 8T-9496 | [4] | LOCKNUT (9/16-18-THD) | |
| 26. | 2K-4973 | [4] | LOCKNUT (3/8-16-THD) | |
| 27. | 3W-9208 | [2] | PAWL | |
| 28. | 8Y-4000 C | [2] | LATCH AS (T-BAR, COMPARTMENT) | |
| (EACH INCLUDES) | ||||
| 8Y-3998 C | [1] | HANDLE-LATCH | ||
| 29. | 6H-3956 | [1] | PIN | |
| 30. | 8Y-3999 C | [1] | BRACKET-MOUNTING | |
| 31. | 8Y-8306 C | [1] | SHAFT-LATCH | |
| 32. | 7X-0766 | [1] | SPRING-LATCH | |
| 33. | 8Y-3966 | [1] | WASHER (14.7X35X1.57-MM THK) | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
#SEBP19190257
8G-7078: ENCLOSURE GP-FENDER
For full view, you need register
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-4516 | [1] | SUPPORT AS | |
| 2. | 3W-1208 | [1] | DOOR AS | |
| 3W-4521 | [1] | HINGE | ||
| 9F-2978 | [2] | NUT-WELD (3/8-16-THD) | ||
| 3. | 4L-6454 C | [4] | BOLT (3/8-16X1-IN) | |
| 4. | 5P-1075 C | [20] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 5. | 2N-3479 | [4] | SCREW (10-24X0.5-IN) | |
| 6. | 9F-8125 | [4] | LOCKWASHER | |
| 7. | 2G-9524 | [1] | LATCH | |
| 8. | 5M-3062 C | [8] | BOLT (3/8-16X0.75-IN) | |
| 9. | 3W-4527 | [1] | COVER | |
| 10. | 3W-4524 | [1] | LINK | |
| 11. | 3W-4520 | [1] | COVER | |
| 12. | 5P-2566 C | [5] | BOLT (1/2-13X1.5-IN) | |
| 13. | 3W-9481 | [5] | BOSS | |
| 14. | 5P-1076 | [5] | WASHER-HARD (13.5X30X4-MM THK) | |
| 15. | 3W-1071 | [1] | BRACKET AS | |
| 16. | 6V-9197 | [2] | LOCK PIN | |
| 17. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 18. | 3W-1204 | [1] | BRACKET AS | |
| 19. | 5S-7379 C | [8] | BOLT (3/8-16X0.875-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP19190258
8G-7078: ENCLOSURE GP-FENDER
For full view, you need register
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-4516 | [1] | SUPPORT AS | |
| 2. | 3W-1208 | [1] | DOOR AS | |
| 3W-4521 | [1] | HINGE | ||
| 9F-2978 | [2] | NUT-WELD (3/8-16-THD) | ||
| 3. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
| 4. | 5P-1075 | [20] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 5. | 2N-3479 | [4] | SCREW (10-24X0.5-IN) | |
| 6. | 9F-8125 | [4] | LOCKWASHER | |
| 7. | 2G-9524 | [1] | LATCH | |
| 8. | 5M-3062 | [8] | BOLT (3/8-16X0.75-IN) | |
| 9. | 3W-4527 | [1] | COVER | |
| 10. | 3W-4524 | [1] | LINK | |
| 11. | 3W-4520 | [1] | COVER | |
| 12. | 5P-2566 | [5] | BOLT (1/2-13X1.5-IN) | |
| 13. | 3W-9481 | [5] | BOSS | |
| 14. | 5P-1076 | [5] | WASHER-HARD (13.5X30X4-MM THK) | |
| 15. | 3W-1071 | [1] | BRACKET AS | |
| 9F-2978 | [4] | NUT-WELD (3/8-16-THD) | ||
| 16. | 6V-9197 | [2] | LOCK PIN | |
| 17. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 18. | 8E-8594 C | [1] | SUPPORT AS | |
| 9F-2978 | [7] | NUT-WELD (3/8-16-THD) | ||
| 9D-6621 | [2] | NUT-WELD (10-24-THD) | ||
| 19. | 5S-7379 | [8] | BOLT (3/8-16X0.875-IN) | |
| 20. | 7T-8332 C | [3] | MOUNTING | |
| 21. | 6D-9081 C | [3] | RETAINER | |
| 22. | 8T-4835 C | [3] | BOLT (1/2-13X2-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP19190259
8Y-0380: FENDER GP
For full view, you need register
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-1220 | [1] | PLATE | |
| 2. | 5S-7379 C | [6] | BOLT (3/8-16X0.875-IN) | |
| 3. | 5P-1075 C | [6] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 4. | 5P-2566 C | [32] | BOLT (1/2-13X1.5-IN) | |
| 5. | 7X-3391 C | [12] | WASHER-HARD (13.5X32X6-MM THK) | |
| 6. | 8Y-0373 | [1] | PLATE | |
| 7. | 6J-0488 | [22] | SCREW-BUTTON HEAD (3/8-16X0.875-IN) | |
| 8. | 5P-1076 C | [20] | WASHER-HARD (13.5X30X4-MM THK) | |
| 9. | 3W-3896 | [2] | HANDHOLD (GRAB) | |
| 10. | 8T-9398 C | [4] | BOLT (3/4-10X1.75-IN) | |
| 11. | 7X-0521 C | [4] | WASHER-HARD (20X36.5X5-MM THK) | |
| 12. | 3W-3898 | [1] | SUPPORT AS | |
| 13. | 5G-9185 | [1] | FENDER AS | |
| 14. | 8Y-0381 | [1] | FENDER AS | |
| 15. | 8Y-0374 | [2] | PLATE | |
| 16. | 8Y-0375 | [1] | PLATE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
Information:
Caterpillar Parts SIS Catalog D6H :
Truck sale:
38,000
