AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9U-8884 GEAR GP-OUTPUT TRANSFER S/N 3AX543-553 WITHOUT PINION PART OF 9U-8883 TRANSMISSION AR 994 WHEEL LOADER


POWER TRAIN
GEAR GP
POWER TRAIN AR
KIT
COOLER GP

WHEEL LOADER 994 WHEEL LOADER 9YF
 994 Wheel Loader 9YF00001-UP (MACHINE) POWERED BY 3516 Engine SEBP1920 994 9YF   (1990)

POWER TRAIN

GEAR GP
GEAR GP-OUTPUT TRANSFER
6Y-4272 GEAR GP-OUTPUT TRANSFER
GEAR GP-OUTPUT TRANSFER
9U-8884 GEAR GP-OUTPUT TRANSFER
GEAR GP-OUTPUT TRANSFER
9U-8884 GEAR GP-OUTPUT TRANSFER
GEAR GP-OUTPUT TRANSFER
9U-8884 GEAR GP-OUTPUT TRANSFER
GEAR GP-OUTPUT TRANSFER
9U-8884 GEAR GP-OUTPUT TRANSFER
GEAR GP-OUTPUT TRANSFER
9U-8884 GEAR GP-OUTPUT TRANSFER
 

#SEBP19200700
 

9U-8884: GEAR GP-OUTPUT TRANSFER

9U-8884 GEAR GP-OUTPUT TRANSFER
S/N 3AX543-553
WITHOUT PINION
PART OF 9U-8883 TRANSMISSION AR
i00092229 SEBP1920
9U8884 GEAR GP-OUTPUT TRANSFER Parts scheme 9U8884 GEAR GP-OUTPUT TRANSFER Parts scheme
  For full view, you need register

Parts for your 994 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-9862 [1] CASE AS  
  4D-7246 C [6] STUD-TAPERLOCK  
  032-1720 C [1] SPACER  
  6Y-6013 C [1] COVER-REAR  
  5M-8627 C [2] BLOCK  
  8Y-3795 CM [1] BOSS (M10X1.5X39-MM)  
2. 8M-8659 [2] DOWEL  
3. 9S-1366 [10] BOLT (1/2-13X2.5-IN)  
4. 1A-1460 [42] BOLT (1/2-13X2-IN)  
5. 6Y-6679 B [1] SHIM PACK (INCLUDES 26-SHIMS)  
    (INCLUDES 26 SHIMS)
6. 6Y-6618 [1] GEAR-OUTPUT (37-TEETH)  
7. 1P-4696 [2] CONE-BEARING  
8. 1P-4695 [2] CUP-BEARING  
9. 8E-9081 [1] CAGE-BEARING  
10. 9S-1366 [36] BOLT (1/2-13X2.5-IN)  
11. 8F-5900 [2] SEAL-O-RING  
12. 6Y-6680 B [2] SHIM PACK (INCLUDES 26-SHIMS)  
    (EACH INCLUDES 26 SHIMS)
13. 6Y-6629 [1] SPACER  
14. 3F-7182 C [2] CONE-BEARING  
15. 1B-6573 C [2] CUP-BEARING  
16. 6I-9839 C [1] SHAFT  
17. 6Y-6620 [2] GEAR-OUTPUT (39-TEETH)  
18. 101-9565 C [2] CONE-BEARING  
19. 5P-2525 C [2] CUP-BEARING  
20. 6Y-6641 [1] SHAFT-OUTPUT  
21. 6Y-6609 [1] GEAR-OUTPUT (40-TEETH)  
22. 6V-6899 [2] SEAL-LIP TYPE  
23. 6Y-6681 [2] PLATE  
24. 6Y-6638 [1] YOKE AS  
25. 8E-9103 B [1] SHIM PACK (INCLUDES 7-SHIMS)  
    (INCLUDES 7 SHIMS)
26. 6V-9667 M [2] BOLT (M20X2.5X100-MM)  
27. 1J-2859 [1] SEAL-O-RING  
28. 8E-3577 [1] CAGE AS  
29. 8P-3251 [2] COVER AS  
30. 6V-6640 B SEALANT  
31. 2H-6488 [2] BOLT (1/2-13X5-IN)  
32. 4S-5879 [1] SEAL-O-RING  
33. 5P-2523 [2] CONE-BEARING  
34. 9W-5531 [2] SCREEN GP-MAGNETIC  
    (EACH INCLUDES)
35. 8M-7160 [4] MAGNET  
36. 6Y-6616 [1] SPACER (115X140X10-MM THK)  
37. 6Y-6614 [1] PLATE-RETAINER  
38. 0S-1594 [10] BOLT (3/8-16X1-IN)  
39. 6Y-6619 [1] GEAR-OUTPUT (40-TEETH)  
40. 6Y-6632 [1] SHAFT-OUTPUT  
41. 6Y-6645 [1] CAGE-BEARING  
42. 0S-1587 [16] BOLT (1/2-13X1.75-IN)  
43. 1T-0132 [1] SEAL-O-RING  
44. 6Y-6637 [1] YOKE AS  
45. 6Y-6648 [1] CAGE-BEARING  
46. 1S-7408 [1] SEAL-O-RING  
47. 9W-4162 [1] BEARING  
48. 9W-4163 [1] RACE-ROLLER BEARING  
49. 2M-4453 [2] SEAL-O-RING  
50. 3F-5792 [1] SEAL-O-RING  
51. 8E-7217 [1] COVER  
52. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
53. 8T-4132 M [2] NUT (M16X2-THD)  
54. 8E-0296 [1] CAGE AS  
55. 8C-0623 M [2] STUD-TAPERLOCK (M16X2X70-MM)  
56. 6Y-8242 [1] TUBE AS-DRAIN  
57. 1A-2358 [1] PLUG-CUP  
58. 1D-4572 [2] BOLT (1/2-13X5.5-IN)  
59. 3S-3875 [2] SCREEN-SUCTION  
60. 5F-3092 [2] SEAL-O-RING  
61. 8H-7521 [2] SEAL-O-RING  
62. 0S-1591 [8] BOLT (3/8-16X1.5-IN)  
63. 2J-7227 [2] CUP-BEARING  
64. 8E-8126 [2] TUBE AS  
65. 0L-2070 [4] BOLT (3/8-16X2.25-IN)  
66. 5P-6073 [2] ELBOW  
67. 5P-5876 C [6] CONNECTOR  
68. 3J-7704 C [8] SLEEVE  
69. 3J-7705 C [8] NUT (3/4-16-THD)  
70. 3J-5390 [2] PLUG (3/8-18-THD)  
71. 8E-8128 [1] TUBE  
72. 8E-8127 [1] TUBE  
73. 101-8495 C [1] TUBE AS  
74. 101-8485 C [1] TUBE  
75. 101-8496 C [1] TUBE  
76. 0S-1571 C [2] BOLT (3/8-16X1.75-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP19200701
 

9U-8884: GEAR GP-OUTPUT TRANSFER

9U-8884 GEAR GP-OUTPUT TRANSFER
S/N 3AX554-605
WITHOUT PINION
PART OF 9U-8883 TRANSMISSION AR
i00092230 SEBP1920
9U8884 GEAR GP-OUTPUT TRANSFER Parts scheme 9U8884 GEAR GP-OUTPUT TRANSFER Parts scheme
  For full view, you need register

Parts for your 994 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-9862 [1] CASE AS  
  4D-7246 [6] STUD-TAPERLOCK  
  032-1720 [1] SPACER  
  6Y-6013 [1] COVER-REAR  
  5M-8627 [2] BLOCK  
  8Y-3795 M [1] BOSS (M10X1.5X39-MM)  
2. 8M-8659 [2] DOWEL  
3. 9S-1366 [10] BOLT (1/2-13X2.5-IN)  
4. 1A-1460 [42] BOLT (1/2-13X2-IN)  
5. 6Y-6679 B [1] SHIM PACK (INCLUDES 26-SHIMS)  
    (INCLUDES 26 SHIMS)
6. 105-1507 CI [1] GEAR-OUTPUT (37 TEETH)  
7. 1P-4696 [2] CONE-BEARING  
8. 1P-4695 [2] CUP-BEARING  
9. 8E-9081 [1] CAGE-BEARING  
10. 9S-1366 [36] BOLT (1/2-13X2.5-IN)  
11. 8F-5900 [2] SEAL-O-RING  
12. 6Y-6680 B [2] SHIM PACK (INCLUDES 26-SHIMS)  
    (EACH INCLUDES 26 SHIMS)
13. 6Y-6629 [1] SPACER  
14. 3F-7182 [2] CONE-BEARING  
15. 1B-6573 [2] CUP-BEARING  
16. 6I-9839 [1] SHAFT  
17. 105-1508 C [2] GEAR-OUTPUT (39 TEETH)  
18. 101-9565 [2] CONE-BEARING  
19. 5P-2525 [2] CUP-BEARING  
20. 6Y-6641 [1] SHAFT-OUTPUT  
21. 105-1509 C [1] GEAR-OUTPUT (40 TEETH)  
22. 6V-6899 [2] SEAL-LIP TYPE  
23. 6Y-6681 [2] PLATE  
24. 6Y-6638 [1] YOKE AS  
25. 8E-9103 B [1] SHIM PACK (INCLUDES 7-SHIMS)  
    (INCLUDES 7 SHIMS)
26. 6V-9667 M [2] BOLT (M20X2.5X100-MM)  
27. 1J-2859 [1] SEAL-O-RING  
28. 8E-3577 [1] CAGE AS  
29. 8P-3251 [2] COVER AS  
30. 6V-6640 B SEALANT  
31. 2H-6488 [2] BOLT (1/2-13X5-IN)  
32. 4S-5879 [1] SEAL-O-RING  
33. 5P-2523 [2] CONE-BEARING  
34. 9W-5531 [2] SCREEN GP-MAGNETIC  
    (EACH INCLUDES)
35. 8M-7160 [4] MAGNET  
36. 6Y-6616 [1] SPACER (115X140X10-MM THK)  
37. 6Y-6614 [1] PLATE-RETAINER  
38. 0S-1594 [10] BOLT (3/8-16X1-IN)  
39. 105-1510 C [1] GEAR-OUTPUT (40 TEETH)  
40. 6Y-6632 [1] SHAFT-OUTPUT  
41. 6Y-6645 [1] CAGE-BEARING  
42. 0S-1587 [16] BOLT (1/2-13X1.75-IN)  
43. 1T-0132 [1] SEAL-O-RING  
44. 6Y-6637 [1] YOKE AS  
45. 6Y-6648 [1] CAGE-BEARING  
46. 1S-7408 [1] SEAL-O-RING  
47. 9W-4162 [1] BEARING  
48. 9W-4163 [1] RACE-ROLLER BEARING  
49. 2M-4453 [2] SEAL-O-RING  
50. 3F-5792 [1] SEAL-O-RING  
51. 8E-7217 [1] COVER  
52. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
53. 8T-4132 M [2] NUT (M16X2-THD)  
54. 8E-0296 [1] CAGE AS  
55. 8C-0623 M [2] STUD-TAPERLOCK (M16X2X70-MM)  
56. 6Y-8242 [1] TUBE AS-DRAIN  
57. 1A-2358 [1] PLUG-CUP  
58. 1D-4572 [2] BOLT (1/2-13X5.5-IN)  
59. 3S-3875 [2] SCREEN-SUCTION  
60. 5F-3092 [2] SEAL-O-RING  
61. 8H-7521 [2] SEAL-O-RING  
62. 0S-1591 [8] BOLT (3/8-16X1.5-IN)  
63. 2J-7227 [2] CUP-BEARING  
64. 8E-8126 [2] TUBE AS  
65. 0L-2070 [4] BOLT (3/8-16X2.25-IN)  
66. 5P-6073 [2] ELBOW  
67. 5P-5876 C [6] CONNECTOR  
68. 3J-7704 C [8] SLEEVE  
69. 3J-7705 C [8] NUT (3/4-16-THD)  
70. 3J-5390 [2] PLUG (3/8-18-THD)  
71. 8E-8128 [1] TUBE  
72. 8E-8127 [1] TUBE  
73. 101-8495 C [1] TUBE AS  
74. 101-8485 C [1] TUBE  
75. 101-8496 C [1] TUBE  
76. 0S-1571 C [2] BOLT (3/8-16X1.75-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP19200702
 

9U-8884: GEAR GP-OUTPUT TRANSFER

9U-8884 GEAR GP-OUTPUT TRANSFER
S/N 3AX606-719
WITHOUT PINION
PART OF 9U-8883 TRANSMISSION AR
i00092231 SEBP1920
9U8884 GEAR GP-OUTPUT TRANSFER Parts scheme 9U8884 GEAR GP-OUTPUT TRANSFER Parts scheme
  For full view, you need register

Parts for your 994 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-4529 CY [1] CASE GP-GEAR  
2. 0S-1591 [8] BOLT (3/8-16X1.5-IN)  
3. 2J-7227 [2] CUP-BEARING  
4. 1A-1460 [42] BOLT (1/2-13X2-IN)  
5. 6Y-6679 B [1] SHIM PACK (INCLUDES 26-SHIMS)  
    (INCLUDES 26 SHIMS)
6. 116-7705 [1] GEAR-OUTPUT (37 TEETH)  
7. 1P-4696 [2] CONE-BEARING  
8. 1P-4695 [2] CUP-BEARING  
9. 8E-9081 [1] CAGE-BEARING  
10. 9S-1366 [36] BOLT (1/2-13X2.5-IN)  
11. 8F-5900 [2] SEAL-O-RING  
12. 6Y-6680 B [2] SHIM PACK (INCLUDES 26-SHIMS)  
    (EACH INCLUDES 26 SHIMS)
13. 6Y-6629 [1] SPACER  
14. 3F-7182 [2] CONE-BEARING  
15. 1B-6573 [2] CUP-BEARING  
16. 6I-9839 [1] SHAFT  
17. 116-7706 [2] GEAR-OUTPUT (39 TEETH)  
18. 101-9565 [2] CONE-BEARING  
19. 5P-2525 [2] CUP-BEARING  
20. 6Y-6641 [1] SHAFT-OUTPUT  
21. 116-7707 [1] GEAR-OUTPUT (40-TEETH)(40 TEETH)  
22. 116-9328 [2] SEAL-LIP TYPE  
23. 6Y-6681 [2] PLATE  
24. 6Y-6638 [1] YOKE AS  
25. 8E-9103 B [1] SHIM PACK (INCLUDES 7-SHIMS)  
    (INCLUDES 7 SHIMS)
26. 6V-9667 M [2] BOLT (M20X2.5X100-MM)  
27. 1J-2859 [1] SEAL-O-RING  
28. 8E-3577 [1] CAGE AS  
29. 8P-3251 [2] COVER AS  
30. 6V-6640 B SEALANT  
31. 2H-6488 [2] BOLT (1/2-13X5-IN)  
32. 4S-5879 [1] SEAL-O-RING  
33. 5P-2523 [2] CONE-BEARING  
34. 9W-5531 [2] SCREEN GP-MAGNETIC  
    (EACH INCLUDES)
35. 8M-7160 [4] MAGNET  
36. 6Y-6616 [1] SPACER (115X140X10-MM THK)  
37. 6Y-6614 [1] PLATE-RETAINER  
38. 2A-4639 [10] BOLT (3/8-16X1.625-IN)  
39. 116-7708 [1] GEAR-OUTPUT (40-TEETH)(40 TEETH)  
40. 6Y-6632 [1] SHAFT-OUTPUT  
41. 6Y-6645 [1] CAGE-BEARING  
42. 0S-1587 [16] BOLT (1/2-13X1.75-IN)  
43. 1T-0132 [1] SEAL-O-RING  
44. 6Y-6637 [1] YOKE AS  
45. 6Y-6648 [1] CAGE-BEARING  
46. 1S-7408 [1] SEAL-O-RING  
47. 9W-4162 [1] BEARING  
48. 9W-4163 [1] RACE-ROLLER BEARING  
49. 2M-4453 [2] SEAL-O-RING  
50. 3F-5792 [1] SEAL-O-RING  
51. 8E-7217 [1] COVER  
52. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
53. 8T-4132 M [2] NUT (M16X2-THD)  
54. 8E-0296 [1] CAGE AS  
55. 8C-0623 M [2] STUD-TAPERLOCK (M16X2X70-MM)  
56. 6Y-8242 [1] TUBE AS-DRAIN  
57. 1A-2358 [1] PLUG-CUP  
58. 1D-4572 [2] BOLT (1/2-13X5.5-IN)  
59. 3S-3875 [2] SCREEN-SUCTION  
60. 5F-3092 [2] SEAL-O-RING  
61. 8H-7521 [2] SEAL-O-RING  
62. 5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
63. 8E-8126 [2] TUBE AS  
64. 0L-2070 [4] BOLT (3/8-16X2.25-IN)  
65. 5P-6073 [2] ELBOW  
66. 5P-5876 [2] CONNECTOR  
67. 3J-7704 [4] SLEEVE  
68. 3J-7705 [4] NUT (3/4-16-THD)  
69. 3J-5390 [2] PLUG (3/8-18-THD)  
70. 8E-8128 [1] TUBE  
71. 8E-8127 [1] TUBE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP19200703
 

9U-8884: GEAR GP-OUTPUT TRANSFER

9U-8884 GEAR GP-OUTPUT TRANSFER
S/N 3AX720-99999
WITHOUT PINION
PART OF 9U-8883 TRANSMISSION AR
Type 1
i00441432 SEBP1920
9U8884 GEAR GP-OUTPUT TRANSFER Parts scheme 9U8884 GEAR GP-OUTPUT TRANSFER Parts scheme
  For full view, you need register

Parts for your 994 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-4529 Y [1] CASE GP-GEAR  
2. 0S-1591 [8] BOLT (3/8-16X1.5-IN)  
3. 2J-7227 [2] CUP-BEARING  
4. 1A-1460 [42] BOLT (1/2-13X2-IN)  
5. 6Y-6679 B [1] SHIM PACK (INCLUDES 26-SHIMS)(INCLUDES 26 SHIMS)  
6. 136-8331 C [1] GEAR-OUTPUT (38-TEETH)  
7. 1P-4696 [2] CONE-BEARING  
8. 1P-4695 [2] CUP-BEARING  
9. 8E-9081 [1] CAGE-BEARING  
10. 9S-1366 [36] BOLT (1/2-13X2.5-IN)  
11. 8F-5900 [2] SEAL-O-RING  
12. 6Y-6680 B [2] SHIM PACK (INCLUDES 26-SHIMS)(EA INCLS 26 SHIMS)  
13. 6Y-6629 [1] SPACER  
14. 3F-7182 [2] CONE-BEARING  
15. 1B-6573 [2] CUP-BEARING  
16. 6I-9839 [1] SHAFT  
17. 136-8332 C [1] GEAR-OUTPUT (38-TEETH)  
18. 101-9565 [2] CONE-BEARING  
19. 5P-2525 [2] CUP-BEARING  
20. 6Y-6641 [1] SHAFT-OUTPUT  
21. 116-7707 [1] GEAR-OUTPUT (40-TEETH)(40 TEETH)  
22. 116-9328 [2] SEAL-LIP TYPE  
23. 6Y-6681 [2] PLATE  
24. 6Y-6638 [1] YOKE AS  
25. 8E-9103 B [1] SHIM PACK (INCLUDES 7-SHIMS)(INCLUDES 7 SHIMS)  
26. 6V-9667 M [2] BOLT (M20X2.5X100-MM)  
27. 1J-2859 [1] SEAL-O-RING  
28. 8E-3577 [1] CAGE AS  
29. 8P-3251 [2] COVER AS  
30. 6V-6640 B SEALANT  
31. 9X-8877 [2] BOLT (1/2-13X5-IN)  
32. 4S-5879 [1] SEAL-O-RING  
33. 5P-2523 [2] CONE-BEARING  
34. 9W-5531 [2] SCREEN GP-MAGNETIC  
    (EACH INCLUDES)
35. 8M-7160 [4] MAGNET  
36. 6Y-6616 [1] SPACER (115X140X10-MM THK)  
37. 6Y-6614 [1] PLATE-RETAINER  
38. 2A-4639 [10] BOLT (3/8-16X1.625-IN)  
39. 116-7708 [1] GEAR-OUTPUT (40-TEETH)(40 TEETH)  
40. 6Y-6632 [1] SHAFT-OUTPUT  
41. 6Y-6645 [1] CAGE-BEARING  
42. 0S-1587 [16] BOLT (1/2-13X1.75-IN)  
43. 1T-0132 [1] SEAL-O-RING  
44. 6Y-6637 [1] YOKE AS  
45. 6Y-6648 [1] CAGE-BEARING  
46. 1S-7408 [1] SEAL-O-RING  
47. 9W-4162 [1] BEARING  
48. 9W-4163 [1] RACE-ROLLER BEARING  
49. 2M-4453 [2] SEAL-O-RING  
50. 3F-5792 [1] SEAL-O-RING  
51. 8E-7217 [1] COVER  
52. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
53. 8T-4132 M [2] NUT (M16X2-THD)  
54. 8E-0296 [1] CAGE AS  
55. 8C-0623 M [2] STUD-TAPERLOCK (M16X2X70-MM)  
56. 6Y-8242 [1] TUBE AS-DRAIN  
57. 1A-2358 [1] PLUG-CUP  
58. 9X-8879 [2] BOLT (1/2-13X5.5-IN)(1/2-13X5.5IN)  
59. 3S-3875 [2] SCREEN-SUCTION  
60. 5F-3092 [2] SEAL-O-RING  
61. 8H-7521 [2] SEAL-O-RING  
62. 5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
63. 136-8333 C [1] GEAR-OUTPUT (40-TEETH)  
64. 8E-8126 [2] TUBE AS  
65. 0L-2070 [4] BOLT (3/8-16X2.25-IN)  
66. 5P-6073 [2] ELBOW  
67. 5P-5876 C [6] CONNECTOR  
68. 3J-7704 C [8] SLEEVE  
69. 3J-7705 C [8] NUT (3/4-16-THD)  
70. 3J-5390 [2] PLUG (3/8-18-THD)  
71. 8E-8128 [1] TUBE  
72. 8E-8127 [1] TUBE  
73. 101-8495 C [1] TUBE AS  
74. 101-8485 C [1] TUBE  
75. 101-8496 C [1] TUBE  
76. 0S-1571 C [2] BOLT (3/8-16X1.75-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP19200704
 

9U-8884: GEAR GP-OUTPUT TRANSFER

9U-8884 GEAR GP-OUTPUT TRANSFER
S/N 3AX720-99999
WITHOUT PINION
PART OF 9U-8883 TRANSMISSION AR
Type 2
i00717073 SEBP1920
9U8884 GEAR GP-OUTPUT TRANSFER Parts scheme 9U8884 GEAR GP-OUTPUT TRANSFER Parts scheme
  For full view, you need register

Parts for your 994 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-4529 Y [1] CASE GP-GEAR  
2. 0S-1591 [8] BOLT (3/8-16X1.5-IN)  
3. 2J-7227 [2] CUP-BEARING  
4. 1A-1460 [42] BOLT (1/2-13X2-IN)  
5. 6Y-6679 B [1] SHIM PACK (INCLUDES 26-SHIMS)  
6. 136-8331 [1] GEAR-OUTPUT (38-TEETH)  
7. 1P-4696 [2] CONE-BEARING  
8. 1P-4695 [2] CUP-BEARING  
9. 148-3020 C [1] CAGE-BEARING  
10. 9S-1366 [36] BOLT (1/2-13X2.5-IN)  
11. 8F-5900 [2] SEAL-O-RING  
12. 6Y-6680 B [2] SHIM PACK (INCLUDES 26-SHIMS)  
13. 6Y-6629 [1] SPACER  
14. 3F-7182 [2] CONE-BEARING  
15. 1B-6573 [2] CUP-BEARING  
16. 6I-9839 [1] SHAFT  
17. 136-8332 [1] GEAR-OUTPUT (38-TEETH)  
18. 101-9565 [2] CONE-BEARING  
19. 5P-2525 [2] CUP-BEARING  
20. 6Y-6641 [1] SHAFT-OUTPUT  
21. 116-7707 [1] GEAR-OUTPUT (40-TEETH)  
22. 116-9328 [2] SEAL-LIP TYPE  
23. 6Y-6681 [2] PLATE  
24. 6Y-6638 [1] YOKE AS  
25. 8E-9103 B [1] SHIM PACK (INCLUDES 7-SHIMS)  
26. 6V-9667 M [2] BOLT (M20X2.5X100-MM)  
27. 1J-2859 [1] SEAL-O-RING  
28. 8E-3577 [1] CAGE AS  
29. 8P-3251 [2] COVER AS  
30. 6V-6640 B SEALANT  
31. 9X-8877 [2] BOLT (1/2-13X5-IN)  
32. 4S-5879 [1] SEAL-O-RING  
33. 5P-2523 [2] CONE-BEARING  
34. 348-7792 [2] SCREEN GP-MAGNETIC  
    (EACH INCLUDES)
35. 8M-7160 [5] MAGNET  
36. 6Y-6616 [1] SPACER (115X140X10-MM THK)  
37. 6Y-6614 [1] PLATE-RETAINER  
38. 2A-4639 [10] BOLT (3/8-16X1.625-IN)  
39. 116-7708 [1] GEAR-OUTPUT (40-TEETH)  
40. 6Y-6632 [1] SHAFT-OUTPUT  
41. 6Y-6645 [1] CAGE-BEARING  
42. 0S-1587 [16] BOLT (1/2-13X1.75-IN)  
43. 1T-0132 [1] SEAL-O-RING  
44. 6Y-6637 [1] YOKE AS  
45. 6Y-6648 [1] CAGE-BEARING  
46. 1S-7408 [1] SEAL-O-RING  
47. 9W-4162 [1] BEARING  
48. 9W-4163 [1] RACE-ROLLER BEARING  
49. 2M-4453 [2] SEAL-O-RING  
50. 3F-5792 [1] SEAL-O-RING  
51. 8E-7217 [1] COVER  
52. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
53. 8T-4132 M [2] NUT (M16X2-THD)  
54. 148-3023 C [1] CAGE AS  
55. 8C-0623 M [2] STUD-TAPERLOCK (M16X2X70-MM)  
56. 6Y-8242 [1] TUBE AS-DRAIN  
57. 1A-2358 [1] PLUG-CUP  
58. 9X-8879 [2] BOLT (1/2-13X5.5-IN)  
59. 3S-3875 [2] SCREEN-SUCTION  
60. 5F-3092 [2] SEAL-O-RING  
61. 8H-7521 [2] SEAL-O-RING  
62. 5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
63. 136-8333 [1] GEAR-OUTPUT (40-TEETH)  
64. 8E-8126 [2] TUBE AS  
65. 0L-2070 [4] BOLT (3/8-16X2.25-IN)  
66. 5P-6073 [2] ELBOW  
67. 5P-5876 [6] CONNECTOR  
68. 3J-7704 [8] SLEEVE  
69. 3J-7705 [8] NUT (3/4-16-THD)  
70. 3J-5390 [2] PLUG (3/8-18-THD)  
71. 8E-8128 [1] TUBE  
72. 8E-8127 [1] TUBE  
73. 101-8495 [1] TUBE AS  
74. 101-8485 [1] TUBE  
75. 101-8496 [1] TUBE  
76. 0S-1571 [2] BOLT (3/8-16X1.75-IN)  
77. 2M-9780 C [1] SEAL-O-RING  
78. 3J-7354 C [2] SEAL-O-RING  
79. 4J-5477 C [4] SEAL-O-RING  
80. 6V-8556 C [1] NUT (1-3/16-12-THD)  
81. 6V-8780 C [1] TEE  
82. 6V-8940 C [1] REDUCER-O-RING  
83. 6V-9000 C [1] ELBOW  
84. 6V-9746 C [2] SEAL-O-RING  
85. 6V-9832 C [1] CAP (ORFS)  
86. 8T-8984 C [1] TEE-O-RING PORT  
87. 148-3024 CI [1] HOSE AS  
88. 148-9759 CI [1] HOSE AS  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP19200705
 

9U-8885: GEAR GP-SPEED SENSOR

9U-8885 GEAR GP-SPEED SENSOR
S/N 3AX1-99999
PART OF 9U-8883 TRANSMISSION AR
i00092232 SEBP1920
9U8885 GEAR GP-SPEED SENSOR Parts scheme
  For full view, you need register

Parts for your 994 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-5613 [1] SPACER (7.85-MM THK)  
2. 369-6693 [1] HOUSING-SENSOR  
3. 1B-3867 [1] BALL BEARING  
4. 8E-9620 [1] SHAFT-SENSOR  
5. 8H-3981 [1] RING-RETAINING  
6. 9W-7334 [1] ROTOR-SENSOR  
7. 2S-6160 [5] WASHER-HARD (10.2X32X5-MM THK)  
8. 3B-1915 [5] BOLT (3/8-16X1.375-IN)  
9. 6T-5612 [5] GROMMET  
10. 9W-7466 [1] RETAINER  
11. 2A-0762 [4] BOLT (1/4-20X0.625-IN)  
12. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
13. 6T-5611 [5] SPACER (9.75X17.5X16.25-MM THK)  
14. 030-8535 [2] BOLT-LOCKING (3/8-16X0.875-IN)  
15. 118-2964 [1] ADAPTER-SPEED SENSOR DRIVE  
 

#SEBP19200706
 

263-9988: KIT-POWER TRAIN

263-9988 KIT-POWER TRAIN
S/N 9YF1-UP
KIT TO IMPROVE INTEGRITTY AND ASSEMBLY OF THE PISTON TO THE ANCHOR BRAKE. KIT CONTAINS ANTIFRICTION BEARINGS,. SLEEVE BEARINGS/BUSHING, THRUST WASHERS/THRUS DISCS, ROLL PINS/SPRING PINS, BEARING LOCATOR DOWELS AND DOWEL HOLE CAPS.. DUO-CONE SEAL GROUPS, SEALS, GASKETS (INCLUDING COPPER) AND BENDABLE LOCKS WILL BE INCLUDED. SOME KITS MAY HAVE THRUST. BUTTONS AND SCREWS TO ATTACH THRUST WASHERS OR PLATE
FOR USE WITH @@@@@ 8R-4204@@@@@
i06145127 SEBP1920
  For full view, you need register

Parts for your 994 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  363-0638 [1] BEARING  
  196-7795 [1] BEARING AS-TAPERED ROLLER  
  201-7718 [1] BEARING AS-TAPERED ROLLER  
  137-6923 [3] BUSHING  
  137-6924 [4] BUSHING  
  2G-4553 [1] PLATE  
  175-3279 [1] RING-SEAL  
  175-3280 [1] RING-SEAL  
  8C-7562 M [4] SCREW-FLAT HEAD (M8X1.25X20-MM)  
  314-4130 [1] SEAL GP-DUO-CONE  
  453-5929 [1] SEAL GP-DUO-CONE  
  2D-6506 [1] SEAL-O-RING  
  2D-8364 [1] SEAL-O-RING  
  2S-4078 [1] SEAL-O-RING  
  3D-2824 [1] SEAL-O-RING  
  3J-7354 [2] SEAL-O-RING  
  4J-5477 [2] SEAL-O-RING  
  7X-4781 [1] SEAL-O-RING  
  7X-4801 [1] SEAL-O-RING  
  175-0100 [1] SEAL-RECTANGULAR  
  175-0103 [1] SEAL-RECTANGULAR  
  7I-5535 [2] WASHER-THRUST  
  8R-6934 [6] WASHER-THRUST  
  8R-6938 [8] WASHER-THRUST  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP19200707
 

161-4311: KIT-TORQUE CONVERTER BEARING

161-4311 KIT-TORQUE CONVERTER BEARING
S/N 9YF1-UP
i05429516 SEBP1920
  For full view, you need register

Parts for your 994 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8T-0231 [1] BALL BEARING  
  065-3758 [1] BALL BEARING  
  111-8922 [1] BEARING AS-NEEDLE  
  115-8398 [1] BEARING AS-NEEDLE  
  5P-6408 [1] BEARING-INNER  
  7T-1995 [1] BUSHING  
  7T-1997 [1] BUSHING  
  6I-9175 [2] LOCK PIN  
  7T-2056 [1] RACE AS  
  7T-1997 [1] BUSHING  
  7T-2057 [1] RACE  
  6I-8575 [1] RACE-THRUST BEARING  
  6I-9176 [1] RACE-THRUST BEARING  
  1T-1754 [25] ROLLER-FREEWHEEL  
  1T-1257 [2] SPRING  
 

#SEBP19200708
 

318-6216: KIT-TRANSMISSION BEARING

318-6216 KIT-TRANSMISSION BEARING
S/N 9YF1-UP
CONTAINS ANTI-FRICTION BEARINGS, SLEEVE BEARINGS/BUSHINGS, METAL SEAL RINGS. THRUST WASHERS/THRUST DISCS, ROLL PINS/SPRING PINS, BEARING LOCATOR DOWELS & DOWEL HOLE CAPS
FIELD REPLACEMENT FOR 260-6481 KIT-POWER TRAIN
FOR USE WITH @@@@@ 9U-8883@@@@@
i05619330 SEBP1920
  For full view, you need register

Parts for your 994 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1B-3867 [1] BALL BEARING  
  5P-1669 [1] BALL BEARING  
  5P-6727 [1] BALL BEARING  
  148-6559 [1] BALL BEARING  
  212-5023 [2] BALL BEARING  
  9W-4162 [1] BEARING  
  310-6158 [8] BEARING  
  5M-7925 [4] BEARING AS-ROLLER  
  6Y-8249 [1] BEARING AS-ROLLER  
  1T-0766 [2] BUSHING  
  1P-4696 [2] CONE-BEARING  
  3F-7182 [2] CONE-BEARING  
  5P-2523 [2] CONE-BEARING  
  101-9565 [2] CONE-BEARING  
  1B-6573 [2] CUP-BEARING  
  1P-4695 [2] CUP-BEARING  
  2J-7227 [2] CUP-BEARING  
  5P-2525 [2] CUP-BEARING  
  8E-8310 [8] DISC-THRUST  
  8E-8316 [32] DISC-THRUST  
  4S-8537 [2] DOWEL  
  4S-8541 [2] DOWEL  
  1J-5353 [2] PIN-SPRING  
  1T-0550 [4] PIN-SPRING  
  2H-9445 [8] PIN-SPRING  
  3S-2708 [5] PIN-SPRING  
  7M-5130 [1] PIN-SPRING  
  9W-4163 [1] RACE-ROLLER BEARING  
  4H-7925 [1] RING-METAL SEAL  
  6F-0155 [2] RING-METAL SEAL  
  3S-8035 [2] RING-SEAL  
  1S-9110 [8] ROLLER AS  
  1P-3958 [4] ROLLER AS-SPECIAL  
 

#SEBP19200709
 

103-5451: LINES GP-AXLE OIL COOLER

103-5451 LINES GP-AXLE OIL COOLER
S/N 9YF28-143
REAR
PART OF 8X-8500 HYDRAULIC AR
i00092396 SEBP1920
1035451 LINES GP-AXLE OIL COOLER Parts scheme
  For full view, you need register

Parts for your 994 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8X-5356 I [2] HOSE AS  
2. 6V-8998 [2] UNION  
3. 6V-9172 [2] NUT (1-7/16-12-THD)  
4. 8X-4763 [1] TUBE AS  
5. 8X-4762 [1] TUBE AS  
6. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
7. 8T-4121 [11] WASHER-HARD (11X21X2.5-MM THK)  
8. 4L-3641 [7] CLIP  
9. 103-2018 I [1] HOSE AS  
10. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
11. 1P-4582 [2] FLANGE-HALF  
12. 8T-4223 [24] WASHER-HARD (13.5X25.5X3-MM THK)  
13. 8T-4183 M [12] BOLT (M12X1.75X40-MM)  
14. 5P-8444 [5] GROMMET (37-MM ID)  
15. 5P-7468 [5] CLIP (SLOT)  
16. 5P-7469 [5] CLIP (TAB)  
17. 5P-7471 [2] CLIP (TAB)  
18. 5P-7470 [2] CLIP (SLOT)  
19. 8T-4194 M [2] BOLT (M12X1.75X50-MM)  
20. 8T-4244 M [2] NUT (M12X1.75-THD)  
21. 5P-8182 [2] GROMMET (46-MM ID)  
22. 103-7267 [2] BRACKET  
23. 103-0621 I [1] HOSE AS  
24. 103-0618 [1] BLOCK  
25. 6V-8635 [4] CONNECTOR  
26. 6V-0397 [2] FLANGE-HALF  
27. 8T-5041 M [4] BOLT (M12X1.75X120-MM)  
28. 6E-1454 [1] VALVE GP-CHECK  
29. 103-0619 [1] BLOCK  
30. 8C-8729 M [4] BOLT-SOCKET HEAD (M12X1.75X80-MM)  
31. 6V-9008 [1] ELBOW  
32. 1P-4579 [4] FLANGE-HALF  
33. 8X-5361 I [1] HOSE AS  
34. 8X-5344 [1] BLOCK  
35. 8T-4176 M [4] BOLT (M12X1.75X90-MM)  
36. 8T-4133 M [2] NUT (M10X1.5-THD)  
37. 8X-5359 I [1] HOSE AS  
38. 8X-5358 I [1] HOSE AS  
39. 103-2017 I [1] HOSE AS  
40. 103-2019 I [1] HOSE AS  
41. 5K-9090 [12] SEAL-O-RING (27.22 MM OD)  
42. 7M-8485 [6] SEAL-O-RING  
43. 4J-0524 [4] SEAL-O-RING  
44. 4J-0527 [1] SEAL-O-RING  
45. 7D-7233 [4] CLIP (LOOP)(SLOT)  
46. 8T-4133 M [1] NUT (M10X1.5-THD)  
47. 7D-1553 [1] CLIP  
48. 4J-0522 [2] SEAL-O-RING  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 994 :

GEAR GP-OUTPUT TRANSFER
9U-8884 GEAR GP-OUTPUT TRANSFER
GEAR GP-OUTPUT TRANSFER
6Y-4272 GEAR GP-OUTPUT TRANSFER
GEAR GP-INPUT TRANSFER
6Y-4271 GEAR GP-INPUT TRANSFER
GEAR GP-INPUT TRANSFER
202-3114 GEAR GP-INPUT TRANSFER
FILTER GP-OIL
8E-0457 FILTER GP-OIL
FILTER GP-OIL
165-8429 FILTER GP-OIL
FILTER GP-OIL
108-1095 FILTER GP-OIL
FILTER & MTG GP-POWER TRAIN
8X-1326 FILTER & MTG GP-POWER TRAIN
GEAR GP-OUTPUT TRANSFER
9U-8884 GEAR GP-OUTPUT TRANSFER
GEAR GP-OUTPUT TRANSFER
9U-8884 GEAR GP-OUTPUT TRANSFER
GEAR GP-OUTPUT TRANSFER
9U-8884 GEAR GP-OUTPUT TRANSFER
GEAR GP-OUTPUT TRANSFER
9U-8884 GEAR GP-OUTPUT TRANSFER
GEAR GP-SPEED SENSOR
9U-8885 GEAR GP-SPEED SENSOR
263-9988 KIT-POWER TRAIN
161-4311 KIT-TORQUE CONVERTER BEARING
318-6216 KIT-TRANSMISSION BEARING

Truck sale:

Caterpillar 994, Construction
62,500 
Caterpillar 994, Construction
- Wheel Loaders
WHAYNE SUPPLY COMPANY
Caterpillar 994, Construction
187,500 
Caterpillar 994, Construction
- Wheel Loaders
WHAYNE SUPPLY COMPANY
CATERPILLAR 994 1994
 
CATERPILLAR 994 1994
- MINING WHEEL LOADER
WHAYNE SUPPLY CO
1991 CAT 994
Call 
1991 CAT 994

BARLIN Equipment
Oconomowoc, Wisconsin
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.