AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4P1583 GOVERNOR GP ENGINE S/N 4TF986-1455, 1457 4P0666-PAGE 62 PART OF 7C6867, 4P5747 GOVERNORS-UNIT INJECTOR 950F


FUEL SYSTEM
GOVERNOR GP

WHEEL LOADER 950F WHEEL LOADER 7ZF
 950F WHEEL LOADER 7ZF00001-UP (MACHINE) POWERED BY 3116 ENGINE SEBP1926 950F 7ZF   (1990)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR GP-UNIT INJECTOR
9Y-3160 GOVERNOR GP-UNIT INJECTOR
4P-5526 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP
4P-1583 GOVERNOR GP
GOVERNOR GP-UNIT INJECTOR
4P-4776 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
7E-8640 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5729 GOVERNOR GP-UNIT INJECTOR
 

#SEBP19260130
 

4P-1583: GOVERNOR GP

4P1583 GOVERNOR GP
ENGINE S/N 4TF986-1455, 1457
4P0666-PAGE 62
PART OF 7C6867, 4P5747 GOVERNORS-UNIT INJECTOR
c497451 SEBP1926
4P1583 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 950F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 7C-8974 [1] CLEVIS AS  
3. 4H-1641 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 7W-7363 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 7W-7362 [1] PISTON-GOVERNOR SERVO  
10. 4P-4983 [1] SLEEVE  
11. 9Y-1837 [1] SPRING  
12. 8T-5447 [1] RING-RETAINING  
13. 7E-5785 [1] SLEEVE-LIMITING  
14. 8T-7060 [1] RING-RETAINING  
15. 7C-0797 [1] LEVER AS-SHAFT  
  Z [1] LEVER  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 7C-6592 [1] ARBOR AS-TORQUE CAM  
24. 8C-6775 M [1] SETSCREW-SOCKET  
25. 7W-5608 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING-NEEDLE  
27. 7W-5560 [1] LEVER AS-RISER  
  Z [1] LEVER  
28. Z [1] SWIVEL  
29. 8C-8580 M [2] BOLT-SOCKET HEAD  
30. 3P-3547 [1] RING-RETAINING  
31. 7E-5784 [1] LEVER AS-LIMIT  
32. Z [1] PIN  
33. Z [1] LEVER-TORQUE  
34. 8T-8895 M [1] SETSCREW-SOCKET  
35. 4W-6630 [1] LEVER  
36. 7W-5614 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD  
38. 7W-4313 [1] WASHER  
39. 7W-8181 [1] HOUSING AS-REAR  
40. Z [1] SHAFT  
41. Z [1] PLUG  
42. 8T-6702 M [1] SETSCREW-SOCKET  
43. 3C-6970 M [3] NUT  
44. 7C-6204 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD  
48. 6V-5683 M [1] BOLT  
49. 8T-5435 M [1] BOLT  
50. 9X-6002 M [1] SETSCREW  
51. 7C-4483 [1] SCREEN AS  
52. 6V-5100 [1] SEAL-O-RING  
53. 7C-6250 [1] COVER AS  
54. Z [1] PLUG  
55. 4W-6010 [1] CLAMP  
56. 8T-0269 M [3] BOLT-SOCKET HEAD  
57. 4P-0666 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 7C-5654 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 8C-8546 M [9] BOLT-SOCKET HEAD  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD  
64. 8C-8545 M [4] BOLT-SOCKET HEAD  
65. 7C-5541 [2] TOE-FLYWEIGHT  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM  
71. 7W-5583 [1] RISER  
72. 7C-2421 [1] SEAT AS-SPRING  
73. Z [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM  
80. 7C-5885 [1] WASHER  
81. 7W-9527 [1] SPRING-TORSION  
82. 5C-8312 M [1] NUT  
83. 5M-2057 [1] SEAL-O-RING  
84. 9X-2315 [1] RING-RETAINING  
85. 4P-5605 [1] SHIM  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBP19260131
 

4P-4776: GOVERNOR GP-UNIT INJECTOR

4P4776 GOVERNOR GP-UNIT INJECTOR
ENGINE S/N 4TF1456, 1458-2765
4P4775-PAGE 63.01
PART OF 9Y3160 GOVERNOR-UNIT INJECTOR
c509830 SEBP1926
4P4776 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 950F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 7C-8974 [1] CLEVIS AS  
3. 4H-1641 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 7W-7363 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 7W-7362 [1] PISTON-GOVERNOR SERVO  
10. 4P-4983 [1] SLEEVE  
11. 9Y-1837 [1] SPRING  
12. 8T-5447 [1] RING-RETAINING  
13. 7E-5785 [1] SLEEVE-LIMITING  
14. 8T-7060 [1] RING-RETAINING  
15. 7C-0797 [1] LEVER AS-SHAFT  
  Z [1] LEVER  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 7C-6592 [1] ARBOR AS-TORQUE CAM  
24. 8C-6775 M [1] SETSCREW-SOCKET  
25. 7W-5608 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING-NEEDLE  
27. 7W-5560 [1] LEVER AS-RISER  
  Z [1] LEVER  
28. Z [1] SWIVEL  
29. 8C-8580 M [2] BOLT-SOCKET HEAD  
30. 3P-3547 [1] RING-RETAINING  
31. 7E-5784 [1] LEVER AS-LIMIT  
32. Z [1] PIN  
33. Z [1] LEVER-TORQUE  
34. 8T-8895 M [1] SETSCREW-SOCKET  
35. 4W-6630 [1] LEVER  
36. 7W-5614 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD  
38. 7W-4313 [1] WASHER  
39. 7W-8181 [1] HOUSING AS-REAR  
40. Z [1] SHAFT  
41. Z [1] PLUG  
42. 8T-6702 M [1] SETSCREW-SOCKET  
43. 3C-6970 M [3] NUT  
44. 7C-6204 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD  
48. 6V-5683 M [1] BOLT  
49. 8T-5435 M [1] BOLT  
50. 9X-6002 M [1] SETSCREW  
51. 7C-4483 [1] SCREEN AS  
52. 6V-5100 [1] SEAL-O-RING  
53. 7C-6250 [1] COVER AS  
54. Z [1] PLUG  
55. 4W-6010 [1] CLAMP  
56. 8T-0269 M [3] BOLT-SOCKET HEAD  
57. 4P-4775 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 8C-8546 M [9] BOLT-SOCKET HEAD  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD  
64. 8C-8545 M [4] BOLT-SOCKET HEAD  
65. 7C-5541 [2] TOE-FLYWEIGHT  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM  
71. 7W-5583 [1] RISER  
72. 7C-2421 [1] SEAT AS-SPRING  
73. Z [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM  
80. 7C-5885 [1] WASHER  
81. 7W-9527 [1] SPRING-TORSION  
82. 5C-8312 M [1] NUT  
83. 5M-2057 [1] SEAL-O-RING  
84. 9X-2315 [1] RING-RETAINING  
85. 4P-5605 [1] SHIM  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBP19260132
 

7E-8640: GOVERNOR GP-UNIT INJECTOR

7E8640 GOVERNOR GP-UNIT INJECTOR
ENGINE S/N 4TF2766-4684
6I0230-PAGE 61.05
PART OF 4P5526 GOVERNOR-UNIT INJECTOR
c523575 SEBP1926
7E8640 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 950F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Y [1] GOVERNOR GP  
2. 7E-0518 [1] CAM-TORQUE  
3. 4P-2467 [1] SPRING GP  
4. 7C-0989 [1] PLUG-ORIFICE  
5. 7C-5989 [1] PLATE-GOVERNOR INFORMATION  
6. 7C-4466 [1] SPRING-DASHPOT  
7. 4P-5617 [1] CONTROL AS-RATIO  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19260133
 

4P-5729: GOVERNOR GP-UNIT INJECTOR

4P5729 GOVERNOR GP-UNIT INJECTOR
ENGINE S/N 4TF4685-99999,98Z1-UP
4P5502-PAGE 61.07
PART OF 4P5526 GOVERNOR-UNIT INJECTOR
c544630 SEBP1926
4P5729 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 950F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 4P-1441 [1] CAM-TORQUE  
3. 4P-2467 [1] SPRING GP  
4. 7C-0989 [1] PLUG-ORIFICE  
5. 4P-5746 [1] CONTROL AS-RATIO  
6. 7C-4466 [1] SPRING-DASHPOT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19260134
 

6I-0230: GOVERNOR GP

6I0230 GOVERNOR GP
ENGINE S/N 4TF2766-4684
6I0232-PAGE 63.03
PART OF 7E8640 GOVERNOR-UNIT INJECTOR
c522921 SEBP1926
6I0230 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 950F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 7C-8974 [1] CLEVIS AS  
3. 4H-1641 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 4P-4985 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 7W-7362 [1] PISTON-GOVERNOR SERVO  
10. 4P-4983 [1] SLEEVE  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 7E-5785 [1] SLEEVE-LIMITTING  
14. 7N-2171 [1] RING-RETAINING  
15. 7E-3215 [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 7C-6592 [1] ARBOR AS-TORQUE CAM  
24. 8C-6775 M [1] SETSCREW-SOCKET  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5743 [1] LEVER AS-LIMIT  
32. Z [1] PIN  
33. Z [1] LEVER-TORQUE  
34. 8T-8895 M [1] SETSCREW-SOCKET  
35. 4W-6630 [1] LEVER  
36. 7W-5614 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD  
38. 7W-4313 [1] WASHER  
39. [1] HOUSING AS-REAR  
40. Z [1] SHAFT  
41. Z [1] PLUG  
42. 8T-6702 M [1] SETSCREW-SOCKET  
43. 5C-2874 M [3] NUT  
44. 7C-6204 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD  
48. 6V-5683 M [1] BOLT  
49. 8T-5435 M [1] BOLT  
50. 9X-6002 M [1] SETSCREW  
51. 7C-4483 [1] SCREEN AS  
52. 6V-5100 [1] SEAL-O-RING  
53. 7C-6250 [1] COVER AS  
54. Z [1] PLUG  
55. 4W-6010 [1] CLAMP  
56. 8T-0269 M [3] BOLT-SOCKET HEAD  
57. 6I-0232 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD  
64. 8C-8545 M [4] BOLT-SOCKET HEAD  
65. 7C-5541 [2] TOE-FLYWEIGHT  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM  
71. 4P-7842 [1] RISER  
72. 4P-7843 [1] SEAT AS-SPRING  
73. Z [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM  
80. 7C-5885 [1] WASHER  
81. 4P-4000 [1] SPRING-LEVER  
82. 5C-8312 M [1] NUT  
83. 5M-2057 [1] SEAL-O-RING  
84. 4P-3537 [1] RING-TOLERANCE  
85. 4P-3539 [1] LEVER-THROTTLE  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
  M   METRIC PART
  Z   NOT SERVICED SEPARATELY
 

#SEBP19260135
 

4P-5502: GOVERNOR GP-UNIT INJECTOR

4P5502 GOVERNOR GP-UNIT INJECTOR
ENGINE S/N 4TF4685-UP
4P5614-PAGE 63.05
PART OF 4P5729 GOVERNOR-UNIT INJECTOR
c511552 SEBP1926
4P5502 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 950F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 7C-8974 [1] CLEVIS AS  
3. 4H-1641 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 4P-4985 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 7W-7362 [1] PISTON-GOVERNOR SERVO  
10. 4P-4983 [1] SLEEVE  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 7E-5785 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 7E-3215 [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 7C-6592 [1] ARBOR AS-TORQUE CAM  
24. 8C-6775 M [1] SETSCREW-SOCKET  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5744 [1] LEVER AS-LIMIT  
32. Z [1] PIN  
33. Z [1] LEVER-TORQUE  
34. 8T-8895 M [1] SETSCREW-SOCKET  
35. 4W-6630 [1] LEVER  
36. 7W-5614 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD  
38. 7W-4313 [1] WASHER  
39. 4P-5613 [1] HOUSING AS-REAR  
40. Z [1] SHAFT  
41. Z [1] PLUG  
42. 8T-6702 M [1] SETSCREW-SOCKET  
43. 3C-6970 M [3] NUT  
44. 7C-6204 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD  
48. 6V-5683 M [1] BOLT  
49. 8T-5435 M [1] BOLT  
50. 9X-6002 M [1] SETSCREW  
51. 7C-4483 [1] SCREEN AS  
52. 6V-5100 [1] SEAL-O-RING  
53. 4P-4231 [1] COVER-REAR  
54. 9T-0823 [2] WASHER  
55. 4W-6010 [1] CLAMP  
56. 8T-0269 M [3] BOLT-SOCKET HEAD  
57. Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD  
64. 8C-8545 M [4] BOLT-SOCKET HEAD  
65. 7C-5541 [2] TOE-FLYWEIGHT  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM  
71. 7W-5583 [1] RISER  
72. 7C-2421 [1] SEAT AS-SPRING  
73. Z [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM  
80. 7C-5885 [1] WASHER  
81. 4P-4000 [1] SPRING-LEVER  
82. 5C-8312 M [1] NUT  
83. 5M-2057 [1] SEAL-O-RING  
84. 4P-3537 [1] RING-TOLERANCE  
85. 4P-3539 [1] LEVER-THROTTLE  
86. 7E-7257 [1] INSERT  
87. 6H-9691 [1] SEAL-O-RING  
88. 7E-7952 [1] SPRING-FLAT  
89. 8C-6365 M [1] BOLT-SOCKET HEAD  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBP19260136
 

107-7829: GOVERNOR GP-UNIT INJECTOR

1077829 GOVERNOR GP
TYPE 1
1008271-PAGE 61.11
PART OF 1077828 GOVERNOR
c626321 SEBP1926
1077829 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 950F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-8271 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 101-3735 [1] CAM AS  
3. 4P-2467 [1] SPRING GP-GOVERNOR  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 4P-6493 [1] PLATE-INFORMATION  
7. 4P-5605 B [4] SHIM (.5MM THK)  
8. 100-4391 [1] SPRING  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP19260137
 

107-7829: GOVERNOR GP-UNIT INJECTOR

1077829 GOVERNOR GP
TYPE 2
1307326-PAGE 61.15
PART OF 1077828 GOVERNOR
c659781 SEBP1926
1077829 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 950F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7326 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 110-6243 [1] CAM AS  
3. 4P-2467 [1] SPRING GP-GOVERNOR  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 4P-6493 [1] PLATE-INFORMATION  
7. 4P-5605 B [4] SHIM (.5MM THK)  
8. 100-4391 [1] SPRING-OIL SIDE  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP19260138
 

100-8271: GOVERNOR GP-UNIT INJECTOR

1008271 GOVERNOR GP-UNIT INJECTOR-PART 1 OF 2
7E8794-PAGE 63.07
PART OF 1077829 GOVERNOR GP
c585081 SEBP1926
1008271 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 950F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-8272 [1] HOUSING AS  
    SHAFT
2. 100-6247 [1] PLUG-EXPANSION  
3. 3T-0849 M [6] BOLT-SOCKET HEAD  
4. 4P-3539 [1] LEVER-THROTTLE  
5. 4P-3537 [1] RING-TOLERANCE  
6. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
7. 8T-5435 M [1] BOLT  
8. 5C-2874 M [1] NUT  
9. 8T-0269 M [1] BOLT-SOCKET HEAD  
10. 1N-3887 [1] SETSCREW-SOCKET  
11. 6V-8189 [1] NUT  
12. 100-5732 [1] LEVER-TORQUE CAM  
13. 105-9790 [1] BRACKET AS  
  8N-0984 [1] PIN-SPRING  
14. 100-5736 M [1] SCREW-TORQUE LEVER  
15. 100-5738 M [1] NUT  
16. 101-1167 [1] SCREW-BUTTON HEAD  
17. 7C-5480 [1] SPRING-TORSION  
18. 9X-2547 M [2] SCREW-FLAT HEAD  
19. 4P-7351 [1] LEVER AS-SHAFT  
  Z PIN  
  Z SWIVEL  
  Z LEVER  
20. 107-7497 [1] WASHER-THRUST  
21. 107-7498 [1] BLOCK AS-BEARING  
22. 7E-3217 [1] LEVER AS  
  Z SWIVEL  
23. 3P-3547 [1] RING-RETAINING  
24. 8C-8546 M [1] BOLT-SOCKET HEAD  
25. 7C-4483 [1] SCREEN AS  
26. 100-5742 [1] LEVER AS-CONTROL  
  100-5733 [1] PIN-LEVER  
27. 100-5739 [1] SPRING-TORSION  
28. 7W-4313 [1] WASHER  
29. 8T-7060 [1] RING-RETAINING  
30. 100-8311 [1] RING-TOLERANCE  
31. 100-5740 [1] SPRING-TORSION  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBP19260139
 

100-8271: GOVERNOR GP-UNIT INJECTOR

1008271 GOVERNOR GP-UNIT INJECTOR-PART 2 OF 2
7E8794-PAGE 63.07
PART OF 1077829 GOVERNOR GP
c732427 SEBP1926
1008271 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 950F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
32. 7C-5148 [1] CARRIER-FLYWEIGHT  
33. 2S-7316 [2] DOWEL  
34. 6V-7699 [4] WASHER-HARD  
35. 8C-8545 M [4] BOLT-SOCKET HEAD  
36. 4P-8947 [1] RISER  
37. 4P-0737 [1] SHAFT-RISER  
38. 7C-5885 [1] WASHER  
39. 8T-0269 M [6] BOLT-SOCKET HEAD  
40. 7L-3386 [1] SEAL-O-RING  
41. 7C-5884 [1] COVER-OIL SUMP  
42. 6V-5213 M [3] BOLT-SOCKET HEAD  
43. 4P-4231 [1] COVER-REAR  
44. 6V-5100 [1] SEAL-O-RING  
45. 7C-5883 B [7] SHIM (.25MM THK)  
46. 7W-5591 [1] SEAT-GOVERNOR SPRING  
47. 7C-3776 [1] PISTON AS  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6404 [1] RING-RETAINING  
48. 4P-8948 [1] SEAT AS-SPRING  
  [1] INSERT  
49. 7W-8993 [2] WEIGHT  
50. 7C-5541 [2] TOE-FLYWEIGHT  
51. 7W-1440 B [8] SHIM (.12MM THK)  
52. 115-1192 [1] SEAL-GOVERNOR HOUSING  
53. 7C-2743 [2] RACE  
54. 7W-5561 [1] BEARING-THRUST  
55. 8C-5061 [1] RING-RETAINING  
56. 8C-8546 M [8] BOLT-SOCKET HEAD  
57. 7C-5150 [1] PIN  
58. 117-9099 C [1] FLANGE  
59. 9Y-1837 [1] SPRING  
60. 125-8158 C [1] SLEEVE-RACK CONTROL  
61. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
62. 5P-9757 [1] SEAL-O-RING  
63. 109-4587 [1] RING-TOLERANCE  
64. 6D-9953 [1] PIN-SPRING  
65. 8T-1460 [2] RING-RETAINING  
66. 108-1612 [1] CLEVIS  
67. 7C-8854 [1] PIN-CLEVIS  
68. 108-1613 [1] PISTON-SERVO  
69. 8C-3312 [1] RING-RETAINING  
70. 114-2897 [1] COVER-FUEL RATIO CONTROL  
71. 7N-2171 C [1] RING-RETAINING  
72. 7W-5324 [1] BEARING  
73. 115-2553 C [1] VALVE-GOVERNOR SERVO  
74. 100-4390 [1] SPRING-AIR SIDE  
75. 7W-1691 [1] WASHER  
76. 100-4395 [1] SEAT-SPRING  
77. 6I-1564 [1] DIAPHRAGM  
78. 114-2899 [1] RETAINER-DIAPHRAGM  
79. 100-4392 [1] SPRING-SERVO  
80. 100-4394 [1] SEAT-SPRING  
81. 8N-5763 [1] SEAL  
82. 8N-5764 [1] PISTON  
83. 100-4393 [1] SPRING-RETURN  
84. 111-7221 [1] VALVE AS  
  8C-5899 [1] PIN-SPRING  
85. 100-5737 M [1] SETSCREW-ADJUSTMENT  
86. 100-5738 M [1] NUT  
87. 2M-9780 [1] SEAL-O-RING  
88. 105-4916 [1] PLUG-O-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

Information:

Specifications
Governor Identification - Introduction
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Specification
3114, 3116 and 3126 MUI Engine Governors
Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Governor
3114, 3116, 3126 Engines
Systems Operation
Governor Speed Circuit
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types I, II, III, and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Fuel Ratio Control (Types I and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Servo (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Dashpot (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Governor Bias Spring (Most Types IV, V, and VI)
3114, 3116 and 3126 MUI Engine Governors
Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Torque Limiter Device (Some Type V)
3114, 3116 and 3126 MUI Engine Governors
Testing and Adjusting
Prepare Calibration Bench for Test Procedure
3114, 3116 and 3126 MUI Engine Governors
Installation of Governor on 1U7326 Governor Calibration Bench
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Setting the Governor Load Stop Dimension for More Than 9.00 mm
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, IV, and V) - Check
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Types IV and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3114, 3116 and 3126 MUI Engine Governors
Governor - Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Governor - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 950F :

4P-5526 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
9Y-3160 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5747 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
7C-6867 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
7C-6867 GOVERNOR GP-UNIT INJECTOR
INSTALLATION GP-CONTROLS
8R-9127 INSTALLATION GP-CONTROLS
INSTALLATION GP-CONTROLS
8R-9127 INSTALLATION GP-CONTROLS
PEDAL GP-GOVERNOR
8V-1179 PEDAL GP-GOVERNOR
GOVERNOR GP-UNIT INJECTOR
4P-4776 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
7E-8640 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5729 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP
6I-0230 GOVERNOR GP
GOVERNOR GP-UNIT INJECTOR
4P-5502 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
107-7829 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
107-7829 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-8271 GOVERNOR GP-UNIT INJECTOR

Truck sale:

Caterpillar 950F
 
Caterpillar 950F
- Wheel loaders
ZIEGLER CAT
Caterpillar 950F, Radlader, Bau-Und Bergbauausrüstung
42.908 
Caterpillar 950F, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
MICHIGAN CAT
 
28.000 
Caterpillar 950F, Radlader, Bau-Und Bergbauausrüstung


Caterpillar 950F, Radlader, Bau-Und Bergbauausrüstung
58.000 
Caterpillar 950F, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
MILTON CAT
Caterpillar 950F, Radlader, Bau-Und Bergbauausrüstung
39.481 
Caterpillar 950F, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
FINNING CANADA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.