AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8R-5054 WIRING GP-ENGINE S/N 3XJ1324-2067 PART OF 8R-1895 CHASSIS AR 966F WHEEL LOADER


ELECTRICAL AND STARTING SYSTEM
WIRING GP

WHEEL LOADER 966F WHEEL LOADER 3XJ
 966F WHEEL LOADER 3XJ00001-UP (MACHINE) POWERED BY 3306 Engine SEBP1929 966F 3XJ   (1990)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
BUFFER GP-SENSOR
9X-3252 BUFFER GP-SENSOR
WIRING GP-ENGINE
8R-5054 WIRING GP-ENGINE
WIRING GP-ENGINE
8R-5054 WIRING GP-ENGINE
WIRING GP-ENGINE
8R-5054 WIRING GP-ENGINE
WIRING GP-FRONT
8R-5055 WIRING GP-FRONT
WIRING GP-FRONT
8R-5055 WIRING GP-FRONT
 

#SEBP19290190
 

8R-5054: WIRING GP-ENGINE

8R-5054 WIRING GP-ENGINE
S/N 3XJ1324-2067
PART OF 8R-1895 CHASSIS AR
i00189104 SEBP1929
8R5054 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 966F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-1693 [1] SWITCH AS-TEMPERATURE (COOLANT TEMP FOR START AID)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
2. 5P-4115 [1] WASHER-HARD (7.2X19X2-MM THK)  
3. 3E-5370 C [1] SENSOR GP-TEMPERATURE (COOLANT)  
  8T-6342 E TUBE-HEAT SHRINK (3.2-MM DIA)(8 CM)  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8731 [1] PLUG-CONNECTOR (3-PIN)  
4. 3J-1907 [2] SEAL-O-RING  
5. 8T-3285 [1] ADAPTER  
6. 3E-5370 C [1] SENSOR GP-TEMPERATURE (TRANSMISSION OIL)  
  8T-6342 E TUBE-HEAT SHRINK (3.2-MM DIA)(8 CM)  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8731 [1] PLUG-CONNECTOR (3-PIN)  
7. 8R-8163 [1] HARNESS AS-ENGINE  
8. 3S-2093 [4] STRAP-CABLE  
9. 7T-0988 [1] SWITCH AS-PRESSURE (ENGINE OIL)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
10. 9S-9370 [1] BUSHING-REDUCER  
11. 9M-8406 [4] CLIP (LOOP)  
12. 5K-0906 [2] BOLT (5/16-18X0.625-IN)  
13. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
14. 7C-1897 [1] SENSOR GP-SPEED (ENGINE)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
15. 9G-9150 [1] CLIP  
16. 7N-3718 [1] CLIP  
17. 4D-7794 [4] CLIP  
18. 6D-4246 [2] CLIP (LOOP)  
19. 6T-2217 [1] RESISTOR AS (STARTER SYSTEM DIAGNOSTIC)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
20. 8R-8162 [1] HARNESS AS-ENGINE  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
 

#SEBP19290191
 

8R-5054: WIRING GP-ENGINE

8R-5054 WIRING GP-ENGINE
S/N 3XJ2068-UP
PART OF 8R-1895 CHASSIS AR
i00189105 SEBP1929
8R5054 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 966F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-1693 [1] SWITCH AS-TEMPERATURE (COOLANT TEMP FOR START AID)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
2. 5P-4115 [1] WASHER-HARD (7.2X19X2-MM THK)  
3. 3E-5370 [1] SENSOR GP-TEMPERATURE (COOLANT)  
  8T-6342 B TUBE-HEAT SHRINK (3.2-MM DIA)(8 CM)  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8731 [1] PLUG-CONNECTOR (3-PIN)  
4. 3J-1907 [2] SEAL-O-RING  
5. 8T-3285 [1] ADAPTER  
6. 3E-5370 [1] SENSOR GP-TEMPERATURE (TRANSMISSION OIL)  
  8T-6342 B TUBE-HEAT SHRINK (3.2-MM DIA)(8 CM)  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8731 [1] PLUG-CONNECTOR (3-PIN)  
7. 8R-8163 [1] HARNESS AS-ENGINE  
8. 3S-2093 [4] STRAP-CABLE  
9. 7T-0988 [1] SWITCH AS-PRESSURE (ENGINE OIL)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
10. 9S-9370 [1] BUSHING-REDUCER  
11. 9M-8406 [4] CLIP (LOOP)  
12. 5K-0906 [2] BOLT (5/16-18X0.625-IN)  
13. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
14. 3E-7886 C [1] SENSOR GP-SPEED (ENGINE)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  9X-1386 B SLEEVE  
15. 9G-9150 [1] CLIP  
16. 7N-3718 [1] CLIP  
17. 4D-7794 [4] CLIP  
18. 6D-4246 [2] CLIP (LOOP)  
19. 6T-2217 [1] RESISTOR AS (STARTER SYSTEM DIAGNOSTIC)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
20. 8R-8162 [1] HARNESS AS-ENGINE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19290192
 

8R-5055: WIRING GP-FRONT

8R-5055 WIRING GP-FRONT
S/N 3XJ1-1253
PART OF 8R-1895 CHASSIS AR
i00189108 SEBP1929
8R5055 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 966F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-3769 [2] GROMMET  
2. 5P-7648 [2] GROMMET  
3. 6C-5031 [1] HARNESS AS  
4. 5M-3062 [3] BOLT (3/8-16X0.75-IN)  
5. 8T-4896 [11] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 6D-4246 [1] CLIP (LOOP)  
7. 9M-8406 [6] CLIP (LOOP)  
8. 9K-0700 [2] GROMMET  
9. 6V-8801 [8] NUT (3/8-16-THD)  
10. 9G-9152 [1] CLIP  
11. 5P-2675 [4] BOLT (1/4-20X1.75-IN)  
12. 5V-6439 [2] PLATE  
13. 4V-1939 [4] CLAMP  
14. 4V-0968 [2] LOCK  
15. 7V-6659 [4] CLAMP-DOUBLE  
16. 4V-0612 [2] PLATE  
17. 8T-8911 [2] BOLT (5/16-18X2-IN)  
18. 8R-8139 [1] HARNESS AS  
19. 3T-3045 [2] CLIP AS  
20. 4D-7794 [4] CLIP  
 

#SEBP19290193
 

8R-5055: WIRING GP-FRONT

8R-5055 WIRING GP-FRONT
S/N 3XJ1254-UP
PART OF 8R-1895 CHASSIS AR
i00189107 SEBP1929
8R5055 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 966F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-3769 [2] GROMMET  
2. 092-9741 C [2] GROMMET  
3. 6C-5958 C [1] HARNESS AS  
4. 5M-3062 [3] BOLT (3/8-16X0.75-IN)  
5. 8T-4896 [11] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 6D-4246 [1] CLIP (LOOP)  
7. 9M-8406 C [3] CLIP (LOOP)  
8. 9K-0700 [2] GROMMET  
9. 6V-8801 [8] NUT (3/8-16-THD)  
10. 9G-9152 [1] CLIP  
11. 5P-2675 [4] BOLT (1/4-20X1.75-IN)  
12. 5V-6439 [2] PLATE  
13. 4V-1939 [4] CLAMP  
14. 4V-0968 [2] LOCK  
15. 7V-6659 [4] CLAMP-DOUBLE  
16. 4V-0612 [2] PLATE  
17. 8T-8911 [2] BOLT (5/16-18X2-IN)  
18. 8R-8139 [1] HARNESS AS  
19. 3T-3045 [2] CLIP AS  
20. 4D-7794 [6] CLIP  
21. 6K-8178 C [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19290194
 

8R-5344: WIRING GP-INSTR & IGNITION

8R-5344 WIRING GP-INSTR & IGNITION
S/N 3XJ1-UP
PART OF 8R-5041 OPERATOR AR
i00561762 SEBP1929
  For full view, you need register

Parts for your 966F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9G-9813 Y [1] ALARM GP (24-VOLT)(ACTION)  
  9G-8451 [1] BLOCK AS  
  1H-3244 [1] LOCKWASHER  
  4B-4276 [2] WASHER (7X16X1.6-MM THK)  
  4L-7124 [1] BOLT (1/4-20X1.25-IN)  
  6V-8185 [1] NUT (1/4-20-THD)  
  5C-9553 M [2] BOLT (M6X1X16-MM)  
  5S-7349 [3] BOLT (1/4-20X0.5-IN)  
  8R-7194 [1] BRACKET  
  6N-8589 [2] CIRCUIT BREAKER AS (15-AMPERE)  
  9G-9154 [1] CLIP  
  9G-9152 [1] CLIP  
  6D-4246 [3] CLIP (LOOP)  
  4S-1962 [1] CLIP (LOOP)  
  4S-4455 [2] CLIP  
  6D-3479 [3] CLIP  
  4D-7794 [1] CLIP  
  9G-9150 [1] CLIP  
  3K-8782 [8] FUSE (10-AMPERE)  
  8R-7198 [1] GASKET  
  5P-9135 [1] GROMMET  
  5P-8438 [1] GROMMET  
  2D-0388 [1] GROMMET (25.4-MM ID)  
  6C-5854 [1] HARNESS AS  
  8R-9296 [1] HARNESS AS  
  6C-4237 [1] HARNESS AS  
  4K-5122 [9] HOLDER AS-FUSE  
    (EACH INCLUDES)
  139-0178 [1] CAP  
  8R-7200 [1] INLAY  
  9W-1494 [1] KIT-SERVICE METER (24-VOLT)  
  1H-4393 [8] LOCKWASHER  
  6V-8801 [13] NUT (3/8-16-THD)  
  1B-2578 [4] NUT (3/8-16-THD)  
  4B-2043 [4] NUT (8-32-THD)  
  5C-2890 M [2] NUT (M6X1-THD)  
  6W-8944 [1] RECEPTACLE AS  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  5P-5623 BD WIRE-ELECTRICAL (16-GA, BLACK)  
  6J-0488 [2] SCREW-BUTTON HEAD (3/8-16X0.875-IN)  
  7S-4338 [8] SCREW-MACHINE (8-32X0.75-IN)  
  8R-7193 [1] STRIP  
  8T-4205 [5] WASHER-HARD (7.2X14.5X2-MM THK)  
  8T-4896 [11] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  6C-4234 [2] WIRE AS  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP19290195
 

6C-8494: WIRING GP-MONITOR

6C-8494 WIRING GP-MONITOR
S/N 3XJ1-UP
PART OF 6C-5342 MONITOR AR-PAYLOAD
i00188877 SEBP1929
6C8494 WIRING GP-MONITOR Parts scheme 6C8494 WIRING GP-MONITOR Parts scheme
  For full view, you need register

Parts for your 966F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8188 [3] NUT (1/2-13-THD)  
2. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
4. 3D-8752 [1] LOCKNUT (5/16-24-THD)  
5. 8K-1253 [2] ROD END  
6. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
  4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
7. 9X-2480 M [3] BOLT (M6X1X45-MM)  
  5C-2890 M [3] NUT (M6X1-THD)  
  9X-8256 [3] WASHER (6.6X12X2-MM THK)  
  8C-5607 [6] MOUNT-ISOLATION  
8. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
9. 4E-2453 [1] SHAFT  
10. 3E-5400 Y [1] SENSOR GP-POSITION (LIFT)  
11. 6D-3025 [2] BALL BEARING  
12. 2L-6726 [2] RING-RETAINING  
13. 2H-3429 [1] RING-RETAINING  
14. 6C-8636 [1] COVER  
15. 4M-5281 [2] BOLT (1/4-20X0.75-IN)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
16. 2M-2292 [1] ROD  
17. 4F-2294 [2] NUT-JAM (5/16-24-THD)  
18. 6S-4868 [1] LEVER  
19. 8T-2502 [1] BOLT (3/8-16X1.125-IN)(SLOT)  
  8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)(18.5MM OD)  
20. 4E-2250 [1] HOUSING  
21. 5P-2424 [2] BOLT (1/2-13X2.25-IN)  
22. 4E-2452 [1] ARM-BAIL  
23. 3T-7567 [1] BAR  
24. 8C-3678 [3] STUD-WELD (1/2-13X1.125-IN)  
25. 4K-8479 [4] STUD-WELD (3/8-16X1.25-IN)  
26. 6V-8188 [2] NUT (1/2-13-THD)  
  8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  8C-3678 [2] STUD-WELD (1/2-13X1.125-IN)  
27. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
  8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
  5C-7261 M [1] NUT (M8X1.25-THD)  
  4S-4455 [1] CLIP  
28. 4E-2448 [1] BRACKET  
29. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)(18.5MM OD)  
30. 6V-8397 [2] SEAL-O-RING  
31. 9R-2152 I [1] HOSE AS  
32. 8R-7723 [1] ADAPTER  
  1P-3703 [1] SEAL-RECTANGULAR  
33. 8T-9101 [4] BOLT (3/8-16X2.75-IN)  
34. 6V-9200 [1] ELBOW  
  3J-7354 [1] SEAL-O-RING  
35. 6V-8636 [1] CONNECTOR  
  3J-1907 [1] SEAL-O-RING  
36. 8C-5586 [1] CONTROL GP-ELECTRONIC (LIFT CYLINDER PRESSURE)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-6342 E TUBE-HEAT SHRINK (3.2-MM DIA)(8CM)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
37. 8N-4326 [1] BRACE  
38. 8T-4182 M [4] BOLT (M10X1.5X45-MM)  
  8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)(21MM OD)  
39. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
40. 3E-5269 [1] CONTROL GP-MONITOR (PAYLOAD CONTROL)  
  9W-0202 [1] FILM-INFORMATION (PAYLOAD MEASUREMENT)  
41. 6C-8422 [1] PLATE AS  
42. 4E-2460 [1] HARNESS AS  
43. 4E-9687 [1] HARNESS AS  
44. 033-8248 [4] CLIP  
  6V-8801 [4] NUT (3/8-16-THD)  
45. 6C-8640 [1] SUPPORT AS  
46. 7K-1181 [12] STRAP-CABLE  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP19290196
 

6C-8494: WIRING GP-MONITOR

6C-8494 WIRING GP-MONITOR
S/N 3XJ1-99999
PART OF 6C-5342 MONITOR AR-PAYLOAD
i00188878 SEBP1929
6C8494 WIRING GP-MONITOR Parts scheme 6C8494 WIRING GP-MONITOR Parts scheme
  For full view, you need register

Parts for your 966F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8188 [3] NUT (1/2-13-THD)  
2. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
4. 3D-8752 [1] LOCKNUT (5/16-24-THD)  
5. 8K-1253 [2] ROD END  
6. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
  4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
7. 9X-2480 M [3] BOLT (M6X1X45-MM)  
  5C-2890 M [3] NUT (M6X1-THD)  
  9X-8256 [3] WASHER (6.6X12X2-MM THK)  
  8C-5607 [6] MOUNT-ISOLATION  
8. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
9. 4E-2453 [1] SHAFT  
10. 3E-5400 [1] SENSOR GP-POSITION (LIFT)  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8731 [1] PLUG-CONNECTOR (3-PIN)  
  9X-1813 SLEEVE (72CM)  
11. 6D-3025 [2] BALL BEARING  
12. 2L-6726 [2] RING-RETAINING  
13. 2H-3429 [1] RING-RETAINING  
14. 6C-8636 [1] COVER  
15. 4M-5281 [2] BOLT (1/4-20X0.75-IN)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
16. 2M-2292 [1] ROD  
17. 4F-2294 [2] NUT-JAM (5/16-24-THD)  
18. 6S-4868 [1] LEVER  
19. 8T-2502 [1] BOLT (3/8-16X1.125-IN)(SLOT)  
  8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
20. 4E-2250 [1] HOUSING  
21. 5P-2424 [2] BOLT (1/2-13X2.25-IN)  
22. 4E-2452 [1] ARM-BAIL  
23. 3T-7567 [1] BAR  
24. 8C-3678 [3] STUD-WELD (1/2-13X1.125-IN)  
25. 4K-8479 [4] STUD-WELD (3/8-16X1.25-IN)  
26. 6V-8188 [2] NUT (1/2-13-THD)  
  8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  8C-3678 [2] STUD-WELD (1/2-13X1.125-IN)  
27. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
  8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
  5C-7261 M [1] NUT (M8X1.25-THD)  
  4S-4455 [1] CLIP  
28. 4E-2448 [1] BRACKET  
29. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
30. 6V-8397 [2] SEAL-O-RING  
31. 9R-2152 I [1] HOSE AS  
32. 8R-7723 [1] ADAPTER  
  1P-3703 [1] SEAL-RECTANGULAR  
33. 8T-9101 [4] BOLT (3/8-16X2.75-IN)  
34. 6V-9200 [1] ELBOW  
  3J-7354 [1] SEAL-O-RING  
35. 6V-8636 [1] CONNECTOR  
  3J-1907 [1] SEAL-O-RING  
36. 103-2040 CY [1] SENSOR GP-PRESSURE (LIFT CYLINDER)  
37. 8N-4326 [1] BRACE  
38. 8T-4182 M [4] BOLT (M10X1.5X45-MM)  
  8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
39. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
40. 3E-9293 C [1] CONTROL GP-MONITOR (PAYLOAD CONTROL)  
  9W-0202 [1] FILM-INFORMATION (PAYLOAD MEASUREMENT)  
41. 6C-8422 [1] PLATE AS  
42. 4E-2460 [1] HARNESS AS  
43. 4E-9687 [1] HARNESS AS  
44. 033-8248 [4] CLIP  
  6V-8801 [4] NUT (3/8-16-THD)  
45. 6C-8640 [1] SUPPORT AS  
46. 7K-1181 [12] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19290197
 

4E-0048: WIRING GP-REAR

4E-0048 WIRING GP-REAR
S/N 3XJ1-UP
PART OF 8R-1895 CHASSIS AR
i00188699 SEBP1929
4E0048 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your 966F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4896 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
2. 8M-2770 [5] CLIP (LOOP)  
3. 8C-5227 [2] PLUG-SEAL  
4. 6V-8801 [1] NUT (3/8-16-THD)  
5. 4K-8302 [2] CLIP (LOOP)  
6. 092-9741 [2] GROMMET  
7. 7M-3361 [2] GROMMET  
8. 3T-3045 [2] CLIP AS  
9. 8R-8185 [1] HARNESS AS  
10. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
11. 5K-3294 [1] CLIP  
  M   METRIC PART
 

#SEBP19290198
 

8R-9426: WIRING GP-RELAY PANEL

8R-9426 WIRING GP-RELAY PANEL
S/N 3XJ1-199
RELAY PANEL
PART OF 8R-5053 BATTERY & WIRING GP
i00189142 SEBP1929
8R9426 WIRING GP-RELAY PANEL Parts scheme
  For full view, you need register

Parts for your 966F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5L-4507 [4] SCREW-MACHINE (10-32X0.875-IN)  
  4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
2. 8R-7931 [1] PLATE AS  
3. 8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
4. 8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
5. 6V-9632 M [2] NUT-WELD (M6X1-THD)  
6. 9G-4360 [1] CAP-CONNECTOR  
7. 9S-4693 [1] CIRCUIT BREAKER AS (80-AMPERE)(MAIN)  
7A. 9S-4693 [1] CIRCUIT BREAKER AS (80-AMPERE)(ALTERNATOR)  
    (EACH CIRCUIT BREAKER AS INCLUDES)
8. 7X-3182 [2] BOLT (1/4-28X0.5-IN)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  1H-3244 [2] LOCKWASHER  
9. 7V-9275 [1] STRAP  
10. 3T-2662 [1] CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(RUNNING LIGHTS)  
11. 6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
12. 6N-8589 [1] CIRCUIT BREAKER AS (15-AMPERE)(ENGINE SHUTDOWN)  
13. 6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
14. 8R-8159 [1] HARNESS AS-POWER  
15. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
  8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
  4S-1962 [2] CLIP (LOOP)  
16. 6T-2217 [1] RESISTOR AS  
  7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
17. 8T-4200 M [3] BOLT (M8X1.25X16-MM)  
  8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
18. 9G-9150 [1] CLIP  
19. 3K-8782 [3] FUSE (10-AMPERE)  
20. 4K-5122 [3] HOLDER AS-FUSE  
    (EACH INCLUDES)
  7N-2867 [1] CAP-FUSE HOLDER  
21. 8R-7933 [1] PLATE AS  
22. 6V-9632 M [2] NUT-WELD (M6X1-THD)  
23. 8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
24. 8T-4970 M [4] BOLT (M6X1X14-MM)  
  8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
25. 3T-0376 [1] SWITCH AS-MAGNETIC (MAIN RELAY)  
26. 4F-2294 [2] NUT-JAM (5/16-24-THD)  
27. 6V-8378 [2] NUT (10-32-THD)  
28. 9F-3099 [1] SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)  
29. 6V-8377 [2] NUT (8-32-THD)  
  3B-4501 [2] LOCKWASHER  
30. 6V-8186 [2] NUT-FULL (5/16-24-THD)  
  3F-9556 [2] LOCKWASHER  
31. 5M-6668 [4] SCREW-MACHINE (8-32X0.75-IN)  
  4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
  M   METRIC PART
 

#SEBP19290199
 

8R-9426: WIRING GP-RELAY PANEL

8R-9426 WIRING GP-RELAY PANEL
S/N 3XJ200-UP
RELAY PANEL
PART OF 8R-5053 BATTERY & WIRING GP
i00189141 SEBP1929
8R9426 WIRING GP-RELAY PANEL Parts scheme
  For full view, you need register

Parts for your 966F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5L-4507 [4] SCREW-MACHINE (10-32X0.875-IN)  
  4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
2. 8R-7931 [1] PLATE AS  
3. 8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
4. 8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
5. 6V-9632 M [2] NUT-WELD (M6X1-THD)  
6. 9G-4360 [1] CAP-CONNECTOR  
7. 9S-4693 [1] CIRCUIT BREAKER AS (80-AMPERE)(MAIN)  
7A. 9S-4693 [1] CIRCUIT BREAKER AS (80-AMPERE)(ALTERNATOR)  
    (EACH INCLUDES)
8. 6V-8365 [2] SCREW-MACHINE (1/4-28X0.5-IN)  
  1H-3244 [2] LOCKWASHER  
9. 7V-9275 [1] STRAP  
10. 3T-2662 [1] CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(RUNNING LIGHTS)  
11. 6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
12. 6N-8589 [1] CIRCUIT BREAKER AS (15-AMPERE)(ENGINE SHUTDOWN)  
13. 6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
14. 6C-5246 [1] HARNESS AS  
15. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
  8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
  7D-7233 [2] CLIP  
16. 6T-2217 [1] RESISTOR AS (STARTING SYSTEM DIAGNOSTIC)  
  7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
17. 8T-4200 M [3] BOLT (M8X1.25X16-MM)  
  8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
18. 9G-9150 [1] CLIP  
19. 3K-8782 [4] FUSE (10-AMPERE)  
20. 4K-5122 [4] HOLDER AS-FUSE  
    (EACH INCLUDES)
  7N-2867 [1] CAP-FUSE HOLDER  
21. 8R-7933 [1] PLATE AS  
22. 6V-9632 M [2] NUT-WELD (M6X1-THD)  
23. 8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
24. 8T-4970 M [4] BOLT (M6X1X14-MM)  
  8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
25. 3T-0376 [1] SWITCH AS-MAGNETIC (MAIN RELAY)  
26. 4F-2294 [2] NUT-JAM (5/16-24-THD)  
27. 6V-8378 [2] NUT (10-32-THD)  
28. 9F-3099 [1] SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)  
29. 6V-8377 [2] NUT (8-32-THD)  
  3B-4501 [2] LOCKWASHER  
30. 6V-8186 [2] NUT-FULL (5/16-24-THD)  
  3F-9556 [2] LOCKWASHER  
31. 5M-6668 [4] SCREW-MACHINE (8-32X0.75-IN)  
  4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
32. 4E-2355 [1] INLAY  
  M   METRIC PART
 

Information:

Engine News
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/11/01
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Magazine
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26
Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 966F :

WIRING GP-ENGINE
8R-5054 WIRING GP-ENGINE
WARNING GP-BACKUP
8R-9712 WARNING GP-BACKUP
SWITCH GP-START
9G-7641 SWITCH GP-START
SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT
STARTING MOTOR GP-ELECTRIC
9X-4447 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
8C-3651 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
6V-5538 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
6V-5537 STARTING MOTOR GP-ELECTRIC
WIRING GP-ENGINE
8R-5054 WIRING GP-ENGINE
WIRING GP-FRONT
8R-5055 WIRING GP-FRONT
WIRING GP-FRONT
8R-5055 WIRING GP-FRONT
8R-5344 WIRING GP-INSTR & IGNITION
WIRING GP-MONITOR
6C-8494 WIRING GP-MONITOR
WIRING GP-MONITOR
6C-8494 WIRING GP-MONITOR
WIRING GP-REAR
4E-0048 WIRING GP-REAR
WIRING GP-RELAY PANEL
8R-9426 WIRING GP-RELAY PANEL

Truck sale:

Caterpillar 966F
 
Caterpillar 966F
- Wheel loaders
HOLT CAT
 
70.000 
Caterpillar 966F, Radlader, Bau-Und Bergbauausrüstung


Caterpillar 966F, Radlader, Bau-Und Bergbauausrüstung
48.707 
Caterpillar 966F, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
EMPIRE MACHINERY
 
13.500 
Caterpillar ATTACHMENTS 72_950/966_FORK_ W/CARRIAGE_FUSION_QC, gabeln, Bau-Und Bergbauausrüstung


 
50.871 
Caterpillar 966F, Radlader, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.