4P0716 ENGINE AR-PART 1 OF 2 3516 MARINE ENGINE

Part No	Qty	Parts name


7E-8991 Y	[1]	AFTERCOOLER GP-RAW WATER

4W-1449 Y	[1]	BREATHER GP

7E-9484 Y	[1]	CAMSHAFT GP-SINGLE
8N-8993 Y	[1]	CONNECTION GP-WATER
4W-2967 Y	[1]	CONTROL GP-FUEL INJECTION
4W-5891 Y	[1]	COOLER GP-ENGINE OIL
8N-0342 Y	[1]	COVER GP-CYLINDER BLOCK
4W-1529 Y	[1]	COVER GP-FLYWHEEL HOUSING
8N-9642 Y	[1]	COVER GP-FRONT HOUSING
7N-1855 Y	[14]	COVER GP-VALVE MECHANISM
8N-0337 Y	[1]	CRANKSHAFT GP
7C-8147 Y	[1]	CYLINDER BLOCK GP
7C-8120 Y	[16]	CYLINDER HEAD GP
		S/N 4MJ1-37
4P-2470 Y	[16]	CYLINDER HEAD GP
		S/N 4MJ38-UP

7E-9483 Y	[1]	DAMPER GP
7N-4871 Y	[1]	DRIVE GP-ACCESSORY
4P-5289 Y	[1]	DRIVE GP-ACCESSORY
		S/N 4MJ1-45

7N-1875 Y	[1]	FILLER GP-OIL
4P-1566 Y	[1]	FILTER GP-FUEL
7E-9480 Y	[1]	FILTER GP-OIL
7N-4851 Y	[1]	FLYWHEEL GP

4P-6732 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK)
8N-7174 Y	[1]	GEAR GP-FRONT
4W-5906 Y	[1]	GEAR GP-REAR
		S/N 4MJ38-45
100-8310 Y	[1]	GEAR GP-REAR
		S/N 4MJ46-UP
8N-6712 Y	[1]	GOVERNOR GP-WOODWARD

4P-3454 Y	[1]	HOUSING GP-FLYWHEEL
7W-3724 Y	[1]	HOUSING GP-FRONT
Y		SEPARATE ILLUSTRATION

#SEBP19320002

4P-0716: ENGINE AR

ENGINE AR

4P0716 ENGINE AR-PART 2 OF 2

SEBP19320002 SEBP1932

For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name

7E-6872 Y	[1]	LIFTING GP
4P-3696 Y	[1]	LINES GP-AIR
9Y-7127 Y	[1]	LINES GP-ENGINE OIL
7E-9474 Y	[1]	LINES GP-FUEL INJECTION
7E-1463 Y	[1]	LINES GP-TURBOCHARGER OIL
7E-9478 Y	[1]	LINES GP-WATER
4P-1509 Y	[1]	LINES GP-WATER
9Y-6150 Y	[1]	LINES GP-WATER
7E-9477 Y	[1]	LINES GP-WATER
4P-0701 Y	[1]	LINES GP-WATER

9Y-4599 Y	[1]	MANIFOLD GP-EXHAUST
		S/N 4MJ1-37
6I-4328 Y	[1]	MANIFOLD GP-EXHAUST
		S/N 4MJ38-45
100-3144 Y	[1]	MANIFOLD GP-EXHAUST
		S/N 4MJ46-UP
2W-9592 Y	[1]	METER GP-SERVICE
8N-7236 Y	[1]	PAN GP-OIL
4P-1552 Y	[16]	PISTON & ROD GP
		S/N 4MJ1-33
6I-2861 Y	[16]	PISTON & ROD GP
		S/N 4MJ34-UP
9Y-5710 Y	[1]	PUMP GP-AUXILIARY
		S/N 4MJ1-45
8N-6152 Y	[1]	PUMP GP-ENGINE OIL
9Y-0136 Y	[16]	PUMP GP-FUEL INJECTION
4P-1563 Y	[1]	PUMP GP-FUEL PRIMING
8N-6151 Y	[1]	PUMP GP-FUEL TRANSFER
8N-9183 Y	[1]	PUMP GP-OIL
2W-9729 Y	[1]	PUMP GP-WATER

8N-7643 Y	[1]	REGULATOR GP-WATER INLET CONTROL

7W-3813 Y	[1]	SEAL GP-CRANKSHAFT
4P-4724 Y	[1]	SHIELD GP-EXHAUST
7N-4869 Y	[1]	SHUT-OFF GP-MANUAL

4P-3309 Y	[1]	TRUNNION GP-ENGINE
4P-2581 Y	[1]	TURBOCHARGER GP

4W-1035 Y	[16]	VALVE MECHANISM GP

		GASKET KITS AVAILABLE:
3E-9881		CENTRAL & LOWER STRUCTURE
100-2944		FRONT STRUCTURE
100-2943		FUEL SYSTEM
100-2945		MANIFOLD
100-2946		OIL COOLER LINES
7X-7713		REAR STRUCTURE
100-2947		SINGLE CYLINDER HEAD
6V-3774		SINGLE CYLINDER LINER
6V-9897		SINGLE FUEL INJECTION
100-2948		WATER PUMP
2W-9728 R		WATER PUMP
R		REMFG PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP19320003

7C-8147: CYLINDER BLOCK GP

CYLINDER BLOCK GP

7C8147 CYLINDER BLOCK GP
7E4937-PAGE 5

c545672 SEBP1932

For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1A-2029	[2]	BOLT
2.	5M-2894	[18]	WASHER
3.	8N-8056	[2]	COVER
4.	5P-8210	[2]	SEAL-O-RING
5.	0S-1595	[2]	BOLT
	5P-8245	[2]	WASHER
6.	9Y-1485	[16]	PLATE-SPACER
7.	100-7886	[16]	GASKET-PLATE
8.	7N-2049	[16]	DOWEL
9.	5P-0840	[32]	SEAL-O-RING
10.	7C-3722	[16]	RETAINER AS-JET
			(EACH INCLUDES)
	6V-3537	[1]	DOWEL
11.	8T-6763	[26]	PLUG
12.	2W-2940	[8]	PLUG-OIL MANIFOLD
13.	0T-0102	[16]	BOLT
14.	1B-2790	[16]	BOLT
	9M-1974	[16]	WASHER-HARD
15.	8T-0099	[32]	DOWEL
16.	7E-4069 C	[16]	JET AS-COOLING
	4D-0514 C	[1]	PLUG-PIPE
17.	7N-5641	[2]	PLUG-MANIFOLD
	5F-9657	[4]	SEAL-O-RING
18.	9S-4191	[6]	PLUG-O-RING
19.	7E-4937 YC	[1]	CYLINDER BLOCK AS
20.	7N-2048	[18]	BEARING-CAMSHAFT
21.	8T-6762	[3]	PLUG-PIPE
22.	7X-7731	[2]	PLUG-PIPE
23.	6V-3348	[8]	SEAL-O-RING
24.	7N-2044	[2]	DOWEL (FRONT OF BLOCK)
	4N-0683	[2]	DOWEL (REAR OF BLOCK)
25.	7N-2047	[3]	DOWEL
26.	7X-4805	[3]	SEAL-O-RING
27.	4W-4813 C	[2]	PLUG
28.	8T-2928 C	[2]	SEAL
29.	8T-2929 C	[2]	SEAL
30.	033-6042	[6]	SEAL-O-RING
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP19320004

7E-4937: CYLINDER BLOCK AS

CYLINDER BLOCK AS

7E4937 CYLINDER BLOCK AS
PART OF 7C8147 CYLINDER BLOCK
FOR FIELD REPLACEMENT ORDER 4P7264-PAGE 6

c504139 SEBP1932

For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8N-4707	[16]	BAND-FILLER
2.	9Y-9175	[9]	CAP-CRANKSHAFT BEARING
3.	7X-7925	[36]	BOLT
	5P-8249	[36]	WASHER
4.	4W-4813 B	[2]	PLUG
5.	8T-2929	[2]	SEAL
6.	7N-2046	[48]	SEAL-O-RING
7.	8N-6861	[16]	LINER-CYLINDER
8.	8T-2928	[2]	SEAL
9.	4W-4814 B	[2]	ADAPTER
	B		USE AS REQUIRED

#SEBP19320005

4P-7264: CYLINDER BLOCK GP

CYLINDER BLOCK GP

4P7264 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR 7E4937-PAGE 5

c524072 SEBP1932

For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7N-2048	[18]	BEARING-CAMSHAFT
2.	9S-4191	[6]	PLUG-O-RING
3.	7N-5641	[2]	PLUG-MANIFOLD
	5F-9657	[4]	SEAL-O-RING
4.	7H-3171	[28]	PLUG-PIPE
5.	2B-0858	[4]	PLUG-PIPE
6.	1B-5174	[2]	PLUG-PIPE
7.	2W-2940	[8]	PLUG-OIL MANIFOLD
8.	6V-3348	[8]	SEAL-O-RING
9.	033-6042	[6]	SEAL-O-RING

#SEBP19320006

8N-0342: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

8N0342 COVER GP-CYLINDER BLOCK

c649509 SEBP1932

For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8N-9992	[15]	COVER-CAMSHAFT
2.	0S-1594	[08]	BOLT (3/8-16X1IN)
3.	2W-2072	[16]	SEAL-O-RING (221.62MM ID)
4.	8N-9993	[1]	COVER-CAMSHAFT
5.	4W-5015 C	[1]	COVER
6.	0S-1595	[4]	BOLT (1/2-13X1.25IN)
	5P-8245	[4]	WASHER
7.	2W-2073	[16]	SEAL-O-RING
8.	5M-2894	[160]	WASHER (2.5MM THK)
9.	8T-6761	[3]	PLUG-PIPE
10.	7N-3298	[3]	COVER-BLOCK
11.	7N-4945	[3]	GASKET
12.	0L-1351	[64]	BOLT (3/8-16X.875IN)
13.	1N-2914	[16]	COVER-CYLINDER BLOCK SIDE
	C		CHANGE FROM PREVIOUS TYPE

#SEBP19320007

8N-0337: CRANKSHAFT GP

CRANKSHAFT GP

8N0337 CRANKSHAFT GP

c596651 SEBP1932

For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7E-3916 R	[1]	CRANKSHAFT AS
2.	7E-4201	[48]	BOLT-12 POINT HEAD
	7E-4202	[48]	WASHER-HARD
3.	7N-2003	[32]	DOWEL
4.	2W-2288	[8]	PLUG
5.	7C-6209 C	[2]	PLATE-THRUST
6.	105-0253	[9]	BEARING-MAIN (STANDARD)
	105-0254 A	[9]	BEARING-MAIN 0.63MM US
	105-0255 A	[9]	BEARING-MAIN 1.27MM US
	105-0256 A	[9]	BEARING-MAIN 0.63MM OS
	105-0257 A	[9]	BEARING-MAIN 0.63MM US-0.63MM OS
	A		NOT PART OF THIS GROUP
	C		CHANGE FROM PREVIOUS TYPE
	R		REMFG PART MAY BE AVAILABLE

#SEBP19320008

4P-3309: TRUNNION GP-ENGINE

TRUNNION GP-ENGINE

4P3309 TRUNNION GP-ENGINE

c497422 SEBP1932

For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-3307	[1]	SUPPORT-OUTER
2.	4P-3308	[1]	ADAPTER-ENGINE SUPPORT
3.	8S-4734	[16]	BOLT
4.	5P-8246	[16]	WASHER-HARD
5.	1D-4566	[20]	BOLT
6.	5P-8245	[20]	WASHER

#SEBP19320009

7W-3813: SEAL GP-CRANKSHAFT

SEAL GP-CRANKSHAFT

7W3813 SEAL GP-CRANKSHAFT

c652485 SEBP1932

For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6I-3809 J	[1]	SEAL GP-CRANKSHAFT
2.	6I-3810 L	[1]	SEAL GP-CRANKSHAFT

			L- INSTALL IN FLYWHEEL
			HSG ON STD ROTATION
			ENGINES & IN FRONT HSG
			ON REVERSE ROTATION
			ENGINES

			J - INSTALL IN FRONT HSG
			ON STD ROTATION ENGINES
			& IN FLYWHEEL HSG ON
			REVERSE ROTATION ENGINES

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Engine Replacement
1982/04/07

Reference Chart for Engine Improvements
1982/11/10

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26

New Engine News Special Edition, Product Support Update-3500 Diesel Commercial Engines, SEBD9243 Is Available{1000}
1997/05/01

Troubleshooting Data Sheet For Diesel Engines {1000}
1997/08/01

Process Changes Result In Improved 3500 Engine Remanufactured Connecting Rod Assembly{1218}
1998/03/01

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1978/01/18

New Engine News Format {0374}
1999/12/01

Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
2000/02/01

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/01

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2002/02/01

WEB Sites Are Available On The Internet For Products That Are Manufactured At The Large Engine Center {1000}
2002/03/01

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/04/01

New Service Information Tool for CAT Dealers is Now Available {1000}
2002/06/01

Responsibilities for Emission Certified Engines {1000}
2005/10/03

Troubleshooting Engines with Mechanical Unit Injection (MUI) {1000, 1254}
2006/01/02

How Is Service Information Accessed / Used {1000}
2009/04/27

Proper Storage Procedures for Commercial Engines {0355, 1000}
2009/12/03

Concerns for Engines with Seawater Cooling in Oil Polluted Water {1000, 1394}
2010/06/17

Contamination Control Guidelines for Marine Engine Rebuilds, Repair, and/or Overhauls {1000}
2010/10/18

Caterpillar Marine Engine - Proper Operation "Quick Reference" {1000}
2013/10/28

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}

Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}

Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}

Marine Propulsion Engine Start-Up Checklist{1000}
Marine Propulsion Engine Start-Up Checklist{1000}

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}

Procedure for Cleaning an Engine that is Saturated with Water{1000}
Procedure for Cleaning an Engine that is Saturated with Water{1000}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}

Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}

Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490}
Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Service Letter-NACD

Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-Brazil

Service Letter-Truck/Ag/Marine

Technical Information Bulletin

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}

Specifications

Engine Design
3500 Marine Engines

Tool Operating Manual

Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709}
NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709}

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Information Release Memo

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Service Letter-APD

Testing and Adjusting

Engine Rotation
3500 Marine Engines

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}

Service Magazine

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Separate Valve Stem Gauges Available{0653,1000}
1982/06/07

Analyzing A Major Engine Failure{1000}
1982/07/19

Reference Chart for Engine Improvements{0374,1000}
1982/10/25

New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07

Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25

Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04

The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11

Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26

Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15

Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24

New Service Magazine Special Edition (Product Support Update-3500 Machine Engines) Available {1000}
1997/05/05

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/08

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/25

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog 3516 :

4P-0716 ENGINE AR

7C-8147 CYLINDER BLOCK GP

7E-4937 CYLINDER BLOCK AS

4P-7264 CYLINDER BLOCK GP

8N-0342 COVER GP-CYLINDER BLOCK

8N-0337 CRANKSHAFT GP

4P-3309 TRUNNION GP-ENGINE

7W-3813 SEAL GP-CRANKSHAFT

Truck sale:

719,892

Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS

298,989

Caterpillar 3516, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.

500,000

Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY

500,000

Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY

800,000

Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC