AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8E4758 BULLDOZER AR-STRAIGHT (LGP) BULLDOZER S/N 31M1-UP AN ATTACHMENT D3C II TRACK-TYPE TRACTOR


IMPLEMENTS
BULLDOZER GP
WORK TOOLS
BLADE GP
GROUND ENGAGING TOOLS (G.E.T.)
IMPLEMENTS
C-FRAME GP
TRUNNION GP
BULLDOZER GP

TRACK-TYPE TRACTOR D3C II TRACK-TYPE TRACTOR 5ZG
 D3C LGP SERIES II TRACTOR / DIRECT DRIVE / 5ZG00001-UP (MACHINE) POWERED BY 3204 ENGINE SEBP1937 D3C II 5ZG   (1990)

IMPLEMENTS

BULLDOZER GP
8E-4081 BULLDOZER AR-ANGLING
8E-4080 BULLDOZER AR-ANGLING
8E-4758 BULLDOZER AR-STRAIGHT
TRUNNION GP
8J-7127 TRUNNION GP
PUSH ARM GP
8J-7124 PUSH ARM GP
 

#SEBP19370220
 

8E-4758: BULLDOZER AR-STRAIGHT

8E4758 BULLDOZER AR-STRAIGHT
(LGP)
BULLDOZER S/N 31M1-UP
AN ATTACHMENT
SEBP19370220 SEBP1937
  For full view, you need register

Parts for your D3C II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  8J-7126 Y [1] BLADE GP-STRAIGHT  
   
  8J-6894 Y [2] CYLINDER GP-LIFT  
   
  1U-4372 Y [1] LIFT GP-BLADE  
   
  8E-4707 Y [1] LINES GP-TILT CYLINDER  
   
  8E-4276 Y [1] MOUNTING GP-CYLINDER LINES  
   
  6S-7351 Y [1] MOUNTING GP-TRUNNION  
   
  8J-7124 Y [1] PUSH ARM GP  
   
  8J-7127 Y [1] TRUNNION GP  
   
  6S-9647 [1] SUPPORT  
   
  [1] PLATE-SERIAL NUMBER  
    ON BACK OF BLADE, R.H. SIDE-TOP
   
  7B-3028 [2] SCREW-DRIVE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19370221
 

6Y-5518: BLADE GP-ANGLING

6Y5518 BLADE GP-ANGLING
BULLDOZER S/N 5WH1-UP
6Y5838-PAGE 172
PART OF 8E4080, 8E4081 BULLDOZER ARS
AN ATTACHMENT
c641914 SEBP1937
6Y5518 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D3C II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-4088 [1] BUSHING  
2. 6Y-1421 [3] PIN  
3. 1A-2029 [3] BOLT  
  8J-0729 [3] RETAINER  
4. 8E-4711 [1] PLATE  
5. 8J-3344 [2] SPACER  
6. 9J-9004 [4] SPACER  
7. 6Y-5838 Y [1] BIT & CUTTING EDGE GP  
8. 105-8084 [1] PIN AS  
9. 7X-0346 [2] BOLT  
10. 120-4793 [1] BLADE AS-ANGLING  
11. 6Y-4778 [1] PLATE AS  
12. 8J-3989 [1] BRACKET AS  
13. 7J-5131 [1] TRUNNION  
14. 105-8090 [1] PLATE AS  
15. 8P-9770 [1] PLATE  
16. 6Y-3196 [1] BRACKET AS  
17. 3B-8488 [1] FITTING-HYDRAULIC  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19370222
 

8J-7126: BLADE GP-STRAIGHT

8J7126 BLADE GP-STRAIGHT
BULLDOZER S/N 31M1-UP
8J7147-PAGE 172
PART OF 8E4758 BULLDOZER AR
AN ATTACHMENT
c456390 SEBP1937
8J7126 BLADE GP-STRAIGHT Parts scheme
  For full view, you need register

Parts for your D3C II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5360 [1] PLATE-END-LH  
2. 8J-7607 [1] BRACKET AS-LH  
3. 8J-0729 [2] RETAINER  
4. 1A-2029 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
5. 8J-3373 [2] BRACKET AS  
6. 8J-7606 [1] BRACKET AS-RH  
7. 8J-5359 [1] PLATE-END-RH  
8. 8J-7147 CY [1] BIT & CUTTING EDGE GP  
9. 8J-7601 [1] BRACKET AS-RH  
10. 1A-8063 [16] BOLT  
  3B-4512 [16] LOCKWASHER  
11. 3J-6575 [4] BEARING  
12. 8J-7616 [1] SOCKET AS-RH  
13. 3F-6613 [1] SOCKET-JOINT  
14. 4B-1254 [4] SCREW-MACHINE  
15. 3F-6608 [10] SHIM  
16. 8J-0927 [2] PIN  
17. 8J-3344 [4] SPACER  
18. 8J-7615 [1] SOCKET AS-LH  
19. 3F-6613 [1] SOCKET-JOINT  
20. 8J-7602 [1] BRACKET AS-LH  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19370223
 

8J-7147: BIT & CUTTING EDGE GP

8J7147 BIT & CUTTING EDGE GP
BULLDOZER S/N 31M1-UP
PART OF 8J7126 BLADE-STRAIGHT
AN ATTACHMENT
c495734 SEBP1937
8J7147 BIT & CUTTING EDGE GP Parts scheme
  For full view, you need register

Parts for your D3C II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6229 [2] BIT-END  
2. 4T-6231 [2] EDGE-CUTTING  
3. 3F-5108 C [20] BOLT-PLOW  
  4K-0367 [20] NUT  
  4D-3704 C [20] WASHER-HARD  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19370224
 

6Y-5838: BIT & CUTTING EDGE GP

6Y5838 BIT & CUTTING EDGE GP
BULLDOZER S/N 5WH1-UP
PART OF 6Y5518 BLADE-ANGLING
AN ATTACHMENT
c504277 SEBP1937
6Y5838 BIT & CUTTING EDGE GP Parts scheme
  For full view, you need register

Parts for your D3C II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-5839 [1] BIT-END-RH  
  6Y-5840 [1] BIT-END-LH  
2. 4T-6232 [2] EDGE-CUTTING  
3. 3F-5108 [22] BOLT-PLOW  
  4K-0367 [22] NUT  
  5P-8247 [22] WASHER-HARD  
 

#SEBP19370225
 

3G-3440: C-FRAME GP

3G3440 C-FRAME GP
BULLDOZER S/N 5WH1-UP
PART OF 8E4080, 8E4081 BULLDOZER ARS
AN ATTACHMENT
c641583 SEBP1937
3G3440 C-FRAME GP Parts scheme
  For full view, you need register

Parts for your D3C II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-1076 C [4] WASHER-HARD (4MM THK)  
  8E-4072 C [4] SPACER (16MM THK)  
2. 5P-2566 C [4] BOLT  
3. 8E-4026 C [2] PIN AS  
4. 150-0353 [4] SPACER  
5. 8J-0927 [4] PIN  
6. 120-4792 [1] C-FRAME AS  
  8E-5701 B [14] SHIM (.03IN THK)  
6A. 6L-1649 [1] SEAL-O-RING  
6B. 8E-8842 [1] BRACKET AS  
6C. 3G-2569 [1] CAP-BEARING  
6D. 061-6712 [1] RING-RETAINING  
7. 6M-4016 [6] LUG  
8. 4D-9376 [5] BOSS  
9. 8J-3372 [1] BRACKET AS  
10. 8J-3443 [2] BEARING  
11. 8P-9770 [1] PLATE  
12. 117-4635 C [1] PLATE AS  
13. 8J-1148 C [4] BOLT  
14. 8J-0928 [1] PIN  
15. 150-0351 [2] SPACER  
16. 3G-2569 [1] CAP-BEARING  
  8E-5702 B [26] SHIM (0.8MM THK)  
17. 1D-4634 [4] BOLT  
18. 1A-2029 [5] BOLT  
19. 8J-0729 [5] RETAINER  
20. 8E-3308 BC [2] SPACER (25MM THK)  
  8E-3315 BC [2] SPACER (12MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19370226
 

5G-0269: MOUNTING GP-TRUNNION

5G0269 MOUNTING GP-TRUNNION
BULLDOZER S/N 5WH1-UP
PART OF 8E4080 BULLDOZER AR
AN ATTACHMENT
c676218 SEBP1937
5G0269 MOUNTING GP-TRUNNION Parts scheme
  For full view, you need register

Parts for your D3C II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-2521 C [2] NUT-FULL  
2. 7X-0601 C [2] WASHER-HARD  
3. 8E-4025 C [2] EYEBOLT  
4. 3B-8489 C [2] FITTING-GREASE (1/8-27 THD)  
5. 6V-5002 C [2] BEARING-ALIGNING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19370227
 

6S-7351: MOUNTING GP-TRUNNION

6S7351 MOUNTING GP-TRUNNION
BULLDOZER S/N 31M1-UP
PART OF 8E4758 BULLDOZER AR
AN ATTACHMENT
c495738 SEBP1937
6S7351 MOUNTING GP-TRUNNION Parts scheme
  For full view, you need register

Parts for your D3C II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-2521 [2] NUT-FULL  
2. 7X-0601 [2] WASHER-HARD  
3. 6S-7317 [2] RING-LOCK  
4. 6S-7318 [2] BOLT-EYE  
 

#SEBP19370228
 

8J-7127: TRUNNION GP

8J7127 TRUNNION GP
BULLDOZER S/N 31M1-UP
PART OF 8E4758 BULLDOZER AR
AN ATTACHMENT
c119915 SEBP1937
8J7127 TRUNNION GP Parts scheme
  For full view, you need register

Parts for your D3C II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-2726 [1] TRUNNION AS-LH  
2. 2M-0122 [2] DOWEL  
3. 8J-7642 [1] BAR-LH  
4. 9J-2725 [1] TRUNNION AS-RH  
5. 2M-0122 [2] DOWEL  
6. 1D-4608 [8] BOLT  
  2S-0115 [8] WASHER-HARD  
7. 8J-7599 [1] BAR-RH  
 

#SEBP19370229
 

8J-7124: PUSH ARM GP

8J7124 PUSH ARM GP
BULLDOZER S/N 31M1-UP
8J6893-PAGE 138
PART OF 8E4758 BULLDOZER AR
AN ATTACHMENT
c223539 SEBP1937
8J7124 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your D3C II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-6753 [4] BOLT  
2. 4F-2710 [12] NUT  
3. 6F-3183 [2] CAP-BEARING  
4. 8J-7808 [1] PUSH ARM AS (LH)  
5. 6F-3184 [1] BEARING  
6. 2J-7429 [4] BRACKET  
7. 8J-7888 [1] BEARING  
8. 8B-1910 C [2] BOSS  
9. 6M-4263 C [1] BOSS  
10. 8J-7806 [1] BRACE AS  
11. 6J-0706 [1] EYE  
12. 3F-5567 [2] BOLT-EYE  
13. 8B-5144 [2] BOLT  
  1B-4206 [2] NUT  
14. 8J-7805 [2] BRACE AS  
  9J-3181 [1] TUBE AS  
15. 3F-6612 [1] CAP-BALLJOINT  
16. 3F-6492 [1] BALLSTUD  
17. 1A-1135 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
18. 0S-1627 [16] BOLT  
  3B-4512 [16] LOCKWASHER  
19. 1B-4331 [8] NUT  
20. 3J-6572 [48] SHIM .5MM(.02IN)THK  
21. 4J-0121 [4] CAP-BEARING  
22. 8J-6893 Y [1] CYLINDER GP-TILT  
23. 8J-7809 [1] PUSH ARM AS (RH)  
24. 8J-7888 [1] BEARING  
25. 2J-7429 [4] BRACKET  
26. 6F-3184 [1] BEARING  
27. 6M-4263 C [1] BOSS  
28. 8B-1910 C [2] BOSS  
29. 4F-0255 [4] PIN (SMALL)  
  3B-4627 [4] COTTER  
30. 3F-6185 [4] PIN (LARGE)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog D3C II :

8E-4080 BULLDOZER AR-ANGLING
8E-4081 BULLDOZER AR-ANGLING
MOUNTING GP-CYLINDER LINES
8E-4276 MOUNTING GP-CYLINDER LINES
MANIFOLD GP
7G-6800 MANIFOLD GP
MANIFOLD GP
6T-2288 MANIFOLD GP
VALVE GP-SELECTOR & PRESS CONT
6T-2287 VALVE GP-SELECTOR & PRESS CONT
VALVE GP-SELECTOR & PRESS CONT
7G-6799 VALVE GP-SELECTOR & PRESS CONT
VALVE GP-CHECK
9T-7634 VALVE GP-CHECK
BLADE GP-ANGLING
6Y-5518 BLADE GP-ANGLING
BLADE GP-STRAIGHT
8J-7126 BLADE GP-STRAIGHT
BIT & CUTTING EDGE GP
8J-7147 BIT & CUTTING EDGE GP
BIT & CUTTING EDGE GP
6Y-5838 BIT & CUTTING EDGE GP
C-FRAME GP
3G-3440 C-FRAME GP
MOUNTING GP-TRUNNION
5G-0269 MOUNTING GP-TRUNNION
MOUNTING GP-TRUNNION
6S-7351 MOUNTING GP-TRUNNION
TRUNNION GP
8J-7127 TRUNNION GP

Truck sale:

 
20,500 
Caterpillar D3CIILGP, Construction
- Dozers
ALTORFER INC.
1988 CAT D3C II
Call 
1988 CAT D3C II

Chown Equipment Ltd.
1991 CAT D3C II
Call 
1991 CAT D3C II

Chown Equipment Ltd.
1991 CAT D3C II
USD $17,000 
1991 CAT D3C II

IC Sales LLC
1993 CAT D3C II
USD $21,900 
1993 CAT D3C II

Leon Equipment LLC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.