100-4493 GOVERNOR GP-UNIT INJECTOR S/N 2BK20438-UP PART OF 100-4514 GOVERNOR GP-UNIT INJECTOR Type 1 3116



FUEL SYSTEM
GOVERNOR GP

TRUCK ENGINE 3116 TRUCK ENGINE 2BK
 3116 Truck Engine(ATAAC) 2BK00001-UP SEBP1938 3116 2BK   (1990)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR GP-UNIT INJECTOR
100-4385 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-4385 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-4493 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-4493 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-4494 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-4494 GOVERNOR GP-UNIT INJECTOR
 

#SEBP19380570
 

100-4493: GOVERNOR GP-UNIT INJECTOR

100-4493 GOVERNOR GP-UNIT INJECTOR
S/N 2BK20438-UP
PART OF 100-4514 GOVERNOR GP-UNIT INJECTOR
Type 1
i00460288 SEBP1938
1004493 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 6I-4267 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 4P-4915 [1] CAM-TORQUE  
3. 4P-8745 [1] SPRING GP  
4. 7C-0989 [1] PLUG-ORIFICE  
5. 4P-5745 [1] CONTROL AS-FUEL RATIO  
  7C-5599 [1] WASHER  
  7W-0802 [1] DIAPHRAGM  
  7W-1691 [1] WASHER (19.15X35X3-MM THK)  
  8T-5447 [1] RING-RETAINING  
6. 7C-4466 [1] SPRING-DASHPOT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19380571
 

100-4493: GOVERNOR GP-UNIT INJECTOR

100-4493 GOVERNOR GP-UNIT INJECTOR
S/N 2BK20438-UP
PART OF 100-4514 GOVERNOR GP-UNIT INJECTOR
Type 2
i00460289 SEBP1938
1004493 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 6I-4267 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 4P-9124 [1] CAM-STEEL NEGATIVE  
3. 7E-3829 C [1] SPRING GP-GOVERNOR  
4. 7C-0989 [1] PLUG-ORIFICE  
5. 4P-5745 [1] CONTROL AS-FUEL RATIO  
  7C-5599 [1] WASHER (20.0MM OD)  
  7W-0802 [1] DIAPHRAGM  
  7W-1691 [1] WASHER (19.15X35X3-MM THK)(35.0MM OD)  
  8T-5447 [1] RING-RETAINING  
6. 7C-4466 [1] SPRING-DASHPOT  
7. 4P-5605 BC [4] SHIM (0.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19380572
 

100-4494: GOVERNOR GP-UNIT INJECTOR

100-4494 GOVERNOR GP-UNIT INJECTOR
S/N 2BK20438-UP
PART OF 100-4515 GOVERNOR GP-UNIT INJECTOR
Type 1
i00460290 SEBP1938
1004494 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 6I-4267 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 4P-9124 [1] CAM-STEEL NEGATIVE  
3. 4P-8745 [1] SPRING GP  
4. 7C-0989 [1] PLUG-ORIFICE  
5. 4P-5745 [1] CONTROL AS-FUEL RATIO  
  7C-5599 [1] WASHER  
  7W-0802 [1] DIAPHRAGM  
  7W-1691 [1] WASHER (19.15X35X3-MM THK)  
  8T-5447 [1] RING-RETAINING  
6. 7C-4466 [1] SPRING-DASHPOT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19380573
 

100-4494: GOVERNOR GP-UNIT INJECTOR

100-4494 GOVERNOR GP-UNIT INJECTOR
S/N 2BK20438-UP
PART OF 100-4515 GOVERNOR GP-UNIT INJECTOR
Type 2
i00460291 SEBP1938
1004494 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 6I-4267 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 4P-4916 [1] CAM-TORQUE  
3. 7E-3829 C [1] SPRING GP-GOVERNOR  
4. 7C-0989 [1] PLUG-ORIFICE  
5. 4P-5745 [1] CONTROL AS-FUEL RATIO  
  7C-5599 [1] WASHER  
  7W-0802 [1] DIAPHRAGM  
  7W-1691 [1] WASHER (19.15X35X3-MM THK)  
  8T-5447 [1] RING-RETAINING  
6. 7C-4466 [1] SPRING-DASHPOT  
7. 4P-5605 BC [4] SHIM (0.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19380574
 

100-4499: GOVERNOR GP-UNIT INJECTOR

100-4499 GOVERNOR GP-UNIT INJECTOR
S/N 2BK23780-UP
PART OF 100-4385, 101-7568 GOVERNOR GP-UNIT INJECTOR
i00168095 SEBP1938
1004499 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 4P-5676 [1] CLEVIS  
3. 4H-1641 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 4P-4985 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 7W-7362 [1] PISTON-GOVERNOR SERVO  
10. 4P-4983 [1] SLEEVE  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 104-7587 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 114-1803 [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER-SHAFT  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN-SPRING  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 123-6433 [1] ARBOR AS-TORQUE CAM  
24. 5M-2057 [1] SEAL-O-RING  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING AS-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
30. 3P-3547 [1] RING-RETAINING  
31. 100-6810 [1] LEVER AS-LIMIT  
32. 4P-3537 [1] RING-TOLERANCE  
33. 4P-3539 [1] LEVER-THROTTLE  
34. 8T-8895 M [2] SETSCREW-SOCKET (M4X0.7X16-MM)  
35. 4W-6630 [1] LEVER  
36. 115-1192 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
38. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
39. 6I-4514 [1] HOUSING AS  
40. Z [1] SHAFT-LEVER  
41. Z [1] PLUG  
42. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
43. 6V-8189 [1] NUT (5/16-18-THD)  
44. 7C-6204 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
48. 6V-5683 M [1] BOLT (M6X1X16-MM)  
49. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
50. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
51. 7C-4483 [1] SCREEN AS (OIL INLET)  
52. 6V-5100 [1] SEAL-O-RING  
53. 4P-4231 [1] COVER-REAR  
54. 5C-2874 M [2] NUT (M5X0.8-THD)  
55. 4W-6010 [1] CLAMP  
56. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
57. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
64. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
65. 7C-5541 [2] PLATE  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM (0.12-MM THK)  
71. 4P-8947 [1] RISER  
72. 4P-8948 [1] SEAT AS-SPRING  
73. Z [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4P-8694 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM (0.25-MM THK)  
80. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
81. 4P-4000 [1] SPRING-LEVER  
82. 5C-8312 M [1] NUT (M4X0.7-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBP19380575
 

100-4514: GOVERNOR GP-UNIT INJECTOR

100-4514 GOVERNOR GP-UNIT INJECTOR
S/N 2BK20438-UP
i00460296 SEBP1938
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
  7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
  100-4493 Y [1] GOVERNOR GP-UNIT INJECTOR  
  7W-8434 Y [1] LINES GP-GOVERNOR OIL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19380576
 

100-4515: GOVERNOR GP-UNIT INJECTOR

100-4515 GOVERNOR GP-UNIT INJECTOR
S/N 2BK20438-UP
i00460297 SEBP1938
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
  7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
  100-4494 Y [1] GOVERNOR GP-UNIT INJECTOR  
  7W-8434 Y [1] LINES GP-GOVERNOR OIL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19380577
 

101-3193: GOVERNOR GP-UNIT INJECTOR

101-3193 GOVERNOR GP-UNIT INJECTOR
S/N 2BK26241-47823
i00463139 SEBP1938
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
  7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
  101-7568 Y [1] GOVERNOR GP-UNIT INJECTOR  
  7W-8434 Y [1] LINES GP-GOVERNOR OIL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19380578
 

101-7568: GOVERNOR GP-UNIT INJECTOR

101-7568 GOVERNOR GP-UNIT INJECTOR
S/N 2BK26241-47823
PART OF 101-3193 GOVERNOR GP-UNIT INJECTOR
i00463867 SEBP1938
1017568 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 100-4499 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 4P-5693 [1] CAM-TORQUE  
3. 7E-3829 [1] SPRING GP-GOVERNOR  
  4P-5605 B [4] SHIM (0.5-MM THK)  
4. 7C-0989 [1] PLUG-ORIFICE  
5. 4P-5695 [1] CONTROL GP-FUEL INJECTION  
6. 7C-4466 [1] SPRING-DASHPOT  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP19380579
 

105-1705: GOVERNOR GP-UNIT INJECTOR

105-1705 GOVERNOR GP-UNIT INJECTOR
S/N 2BK36177-47823
i00478261 SEBP1938
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
  7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
  108-2305 Y [1] GOVERNOR GP-UNIT INJECTOR  
  7W-8434 Y [1] LINES GP-GOVERNOR OIL  
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/23
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
4P6493 Governor Information Plate Available
1992/06/01
Governor Specifications Are Available Through The Technical Information System
1992/09/01
Replacement Governors For Early Engines
1992/11/01
Measuring "Dynamic Rack" Of Unit Injectors
1993/06/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Service Tool Calibration Pins For Mechanical Goverened Engines{1264,1265}
1996/07/30
New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines{1264,1265}
1996/07/30
Governor Shimming Is Determined By The Governor Test Bench Calibration{1264,1289}
1996/07/30
Replacing The Shutoff Assembly In Engines With Older Governors{1264,1289}
1996/07/30
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/30
Engine News
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Operation and Maintenance Manual
Fuel Inlet Screen - Clean/Inspect/Replace
3116 Truck Engine
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Governor
3116 Truck Engines
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Information Release Memo
REMANUFACTURED GOVERNORS FOR VARIOUS 3114 AND 3116 INDUSTRIAL, MACHINE, MARINE AND ON-HIGHWAY TRUCK APPLICATIONS
REMANUFACTURED GOVERNORS FOR VARIOUS 3114 AND 3116 INDUSTRIAL, MACHINE, MARINE AND ON-HIGHWAY TRUCK APPLICATIONS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Governor - Adjust
3116 Truck Engine
Troubleshooting
Governor Instability
3114, 3116 and 3126 Engines
Disassembly and Assembly
Governor - Install
3116 On Highway Engines
Governor - Remove
3116 On Highway Engines
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
4P6493 Governor Information Plate Available{7557}
1992/06/15
Governor Specifications Are Available Through The Technical Information System{1264,0374}
1992/09/07
Replacement Governors For Early Engines{1264}
1992/11/09
Measuring "Dynamic Rack" Of Unit Injectors{0780}
1993/06/21
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17

Caterpillar Parts SIS Catalog 3116 :

GOVERNOR GP-UNIT INJECTOR
100-4385 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-4385 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP
7E-3263 GOVERNOR GP
FILTER GP-FUEL
5R-9001 FILTER GP-FUEL
FILTER GP-FUEL
1N-3476 FILTER GP-FUEL
FILTER & LINES GP-FUEL
7E-0589 FILTER & LINES GP-FUEL
FILTER & LINES GP-FUEL
7E-0589 FILTER & LINES GP-FUEL
FILTER & LINES GP-FUEL
4P-2917 FILTER & LINES GP-FUEL
GOVERNOR GP-UNIT INJECTOR
100-4493 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-4494 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-4494 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-4499 GOVERNOR GP-UNIT INJECTOR
100-4514 GOVERNOR GP-UNIT INJECTOR
100-4515 GOVERNOR GP-UNIT INJECTOR
101-3193 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
101-7568 GOVERNOR GP-UNIT INJECTOR

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QUÉBEC, Quebec, Canada