9X-8112 SWITCH GP-MAGNETIC 12 VOLT. AIR INLET HEATER POWER AN ATTACHMENT 3116 TRUCK ENGINE

ELECTRICAL AND STARTING SYSTEM

SWITCH GP

0. 9X-8112 SWITCH GP-

WIRING GP

1. 4P-1478 WIRING GP-
2. 4P-2514 WIRING GP-
3. 4P-2994 WIRING GP-
4. 4P-3368 WIRING GP-
5. 6I-1781 WIRING GP-

SERVICE EQUIPMENT AND SUPPLIES

CHARTS & FILMS

6. 6L-4502 CHART-PLAT

GASKET & SEAL KITS

7. 196-6931 KIT-GASKET
8. 264-6898 KIT-GASKET
9. 264-6903 KIT-GASKET
0. INFORMATION

TRUCK ENGINE 3116 TRUCK ENGINE 2BK
3116 Truck Engine(ATAAC) 2BK00001-UP SEBP1938 3116 2BK (1990)

ELECTRICAL AND STARTING SYSTEM

SWITCH GP

9X-8112 SWITCH GP-MAGNETIC

#SEBP19380670

9X-8112: SWITCH GP-MAGNETIC

SWITCH GP-MAGNETIC

9X-8112 SWITCH GP-MAGNETIC
12 VOLT. AIR INLET HEATER POWER
AN ATTACHMENT

i01265880 SEBP1938

For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
			(NO SERVICED PARTS)

#SEBP19380671

4P-1478: WIRING GP-HEATER

WIRING GP-HEATER

4P-1478 WIRING GP-HEATER
TUNED INLET

i00373701 SEBP1938

For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-0074	[1]	SWITCH AS-MAGNETIC (AIR HEATER)
	8T-4134 M	[2]	NUT (M6X1-THD)
2.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
3.	112-6646 M	[1]	LOCKNUT (M6X1-THD)
4.	7E-5714	[1]	STRAP-GROUNDING
5.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
6.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
7.	5C-2890 M	[2]	NUT (M6X1-THD)
8.	7E-9958	[1]	MODULE AS-CONTROL
	7E-4520	[1]	BRACKET-MODULE
9.	7E-4512	[1]	BRACKET
10.	7E-9425	[1]	SWITCH AS-TEMPERATURE (WATER)
11.	7E-5602	[1]	SWITCH AS-PRESSURE (OIL)
12.	8T-4970 M	[2]	BOLT (M6X1X14-MM)
13.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
14.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
15.	003-9835	[2]	PROTECTOR
16.	3J-1907	[1]	SEAL-O-RING
17.	5P-5675 D		WIRE (6-GA, BLACK)
18.	9X-9882	[2]	TERMINAL-RING (6-GA TO 8-GA, 1/4-IN SCREW)
	5P-6006 D		TUBE-HEAT SHRINK (9.52-MM DIA)(.1M)
19.	7E-8828	[1]	SHIELD-HEAT
	D		ORDER BY THE METER
	M		METRIC PART

#SEBP19380672

4P-2514: WIRING GP-HEATER

WIRING GP-HEATER

4P-2514 WIRING GP-HEATER

i00374719 SEBP1938

For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7E-5714	[1]	STRAP-GROUNDING
2.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
3.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
4.	7E-9425	[1]	SWITCH AS-TEMPERATURE (WATER)
5.	7E-5602	[1]	SWITCH AS-PRESSURE (OIL)
6.	3J-1907	[1]	SEAL-O-RING
7.	6H-3689	[1]	CAP-PROTECTION
	M		METRIC PART

#SEBP19380673

4P-2994: WIRING GP-HEATER

WIRING GP-HEATER

4P-2994 WIRING GP-HEATER
S/N 2BK1-873

i00375359 SEBP1938

For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7E-9958	[1]	MODULE AS-CONTROL
	7E-4520	[1]	BRACKET-MODULE
2.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
3.	7E-4512	[1]	BRACKET
4.	3E-0074	[1]	SWITCH AS-MAGNETIC (HEATER)
5.	8T-4134 M	[1]	NUT (M6X1-THD)
6.	003-9835	[2]	PROTECTOR
7.	7E-9936	[1]	WIRE AS
8.	7E-9425	[1]	SWITCH AS-TEMPERATURE
9.	7E-5602	[1]	SWITCH AS-PRESSURE (OIL)
10.	3J-1907	[1]	SEAL-O-RING
11.	7E-5714	[1]	STRAP-GROUNDING
12.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
13.	8T-4970 M	[2]	BOLT (M6X1X14-MM)
14.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
15.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
16.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
17.	5C-2890 M	[2]	NUT (M6X1-THD)
18.	7E-8828	[1]	SHIELD-HEAT
	M		METRIC PART

#SEBP19380674

4P-3368: WIRING GP-HEATER

WIRING GP-HEATER

4P-3368 WIRING GP-HEATER
S/N 2BK18836-UP

i00375761 SEBP1938

For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7E-9958 C	[1]	MODULE AS-CONTROL
2.	4P-1443	[1]	BRACKET AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
3.	7E-4512	[1]	BRACKET
4.	3E-0074	[1]	SWITCH AS-MAGNETIC (HEATER)
5.	112-6646 M	[1]	LOCKNUT (M6X1-THD)
6.	003-9835	[2]	PROTECTOR
7.	4P-1826	[1]	WIRE AS
8.	112-5475	[1]	SWITCH-WATER TEMPERATURE
9.	7E-5602	[1]	SWITCH AS-PRESSURE (OIL)
10.	3K-0360	[1]	SEAL-O-RING
11.	7E-5714	[1]	STRAP-GROUNDING
12.	8T-4200 M	[3]	BOLT (M8X1.25X16-MM)
13.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
14.	8T-4970 M	[2]	BOLT (M6X1X14-MM)
15.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
16.	8T-4224	[3]	WASHER-HARD (8.8X16X2-MM THK)
17.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
18.	5C-2890 M	[2]	NUT (M6X1-THD)
19.	7E-8828	[1]	SHIELD-HEAT
20.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP19380675

6I-1781: WIRING GP-HEATER

WIRING GP-HEATER

6I-1781 WIRING GP-HEATER
S/N 2BK11422-13380
AIR HEATER
FOR USE WITH EMERGENCY VEHICLES

i00392780 SEBP1938

For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-1826	[1]	WIRE AS
2.	7E-5714	[1]	STRAP-GROUNDING
3.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
4.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
5.	4P-6602 Y	[1]	MODULE AS-CONTROL
6.	7E-5602	[1]	SWITCH AS-PRESSURE (OIL)
7.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
8.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
9.	003-9835	[2]	PROTECTOR
10.	3J-1907	[1]	SEAL-O-RING
11.	7E-9425	[1]	SWITCH AS-TEMPERATURE (COOLANT)
12.	112-6646 M	[1]	LOCKNUT (M6X1-THD)
13.	3E-0074	[1]	SWITCH AS-MAGNETIC (SOLENOID)
	112-6646 M	[2]	LOCKNUT (M6X1-THD)
	9X-1386 E		SLEEVE (16 CM)
14.	7E-4512	[1]	BRACKET
15.	8T-4970 M	[2]	BOLT (M6X1X14-MM)
16.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
17.	5C-2890 M	[2]	NUT (M6X1-THD)
18.	7E-8828	[1]	SHIELD-HEAT
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP19380676

6L-4502: CHART-PLATE & FILM

CHART-PLATE & FILM

6L-4502 CHART-PLATE & FILM

i01211752 SEBP1938

For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
101-7664	[1]	FILM-IDENTIFICATION (FUEL FILTER)
		(INSTALL ON FUEL FILTER)
4P-8681	[1]	FILM-IDENTIFICATION (ENGINE OIL FILTER)
		(INSTALL ON SPIN-ON OIL FILTER)
9M-0016	[1]	FILM-PATENT (ENGINE)
		(INSTALL ON FRONT TIMING GEAR COVER TOWARDS LEFT HAND SIDE OF ENGINE)
112-4378	[1]	FILM (CAT 3116)(TRADEMARK)
		(INSTALL TOWARDS FRONT OF ENGINE ON TOP OF VALVE COVER, READABLE FROM LEFT HAND SIDE OF ENGINE)
7W-9808	[1]	FILM-INFORMATION (EPA)
		(INSTALL ADJACENT TO RIGHT SIDE OF ENGINE RATING FILM READABLE FROM LEFT HAND SIDE OF ENGINE)
7E-2681	[1]	PLATE-IDENTIFICATION (CATERPILLAR)
		(INSTALL ON RIGHT HAND OR LEFT HAND SIDE OF ENGINE IN A VISIBLE LOCATION. DO NOT INSTALL ON FRONT OR REAR OF ENGINE)
9L-6531	[1]	PLATE-INFORMATION (ENGINE RATING)
		(INSTALL WITH LOCTITE COMPANY DEPEND ADHESIVE ON TOP OF VALVE COVER)
		(TOWARDS FRONT OF ENGINE READABLE FROM LEFT HAND SIDE OF ENGINE)
115-5852	[1]	PLATE & FILM GP (ENGINE INFORMATION)
		(INSTALL ON TOP OF VALVE COVER TOWARDS FRONT OF ENGINE READABLE FROM LEFT HAND SIDE OF ENGINE)
		(INSTALL LAMINANT OVER SILVER FILM)
7C-5989	[1]	PLATE-GOVERNOR INFORMATION
		(INSTALLED ON TOP OF REAR GOVERNOR HOUSING)
3N-3469	[1]	TAG-INSTRUCTION (ENGINE PRESTART)
		(INSTALL ON RIGHT HAND OR LEFT HAND SIDE OF ENGINE IN A VISIBLE LOCATION)
		(DO NOT INSTALL ON FRONT OR REAR OF ENGINE OR COMPONENT)
107-2584	[1]	TAG-INSTRUCTION (ENGINE PRESTART)(DUTCH/ITALIAN)
4W-1410	[1]	TAG-INSTRUCTION (ENGINE PRESTART)(PORTUGUESE/GERMAN)
106-4993	[1]	TAG-INSTRUCTION (ENGINE PRESTART)(RUSSIAN/GREEK)
107-2585	[1]	TAG-INSTRUCTION (ENGINE PRESTART)(SWEDISH/DANISH)
8L-8413	[1]	STRAP-CABLE (WHITE)
		(USE TO INSTALL PRESTART TAG)

#SEBP19380677

196-6931: KIT-GASKET

KIT-GASKET

196-6931 KIT-GASKET -OIL COOLER, LINES
KIT CONTAINS GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLERS, OIL FILTER BASE, AND ATTACHING LINES.
FOR USE WITH @@@@@ 7E-9257@@@@@
FIELD INSTALLATION

i05951884 SEBP1938

For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
240-2767	[1]	GASKET
300-7933	[1]	GASKET (ENGINE OIL FILTER BASE)
3J-1907	[1]	SEAL-O-RING
3P-1156	[2]	SEAL-O-RING
238-5081	[2]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP19380678

264-6898: KIT-GASKET

KIT-GASKET

264-6898 KIT-GASKET -SINGLE CYLINDER HEAD
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD.. KIT INCLUDES TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.
FIELD REPLACEMENT ORDER @@@@@461-9469@@@@@
FOR USE WITH @@@@@ 4P-7157@@@@@, @@@@@ 4P-2109@@@@@, @@@@@ 4P-2831@@@@@, @@@@@ 4P-2832@@@@@, @@@@@ 4P-2833@@@@@, @@@@@ 4P-2834@@@@@, @@@@@ 4P-2835@@@@@, @@@@@ 4P-3656@@@@@, @@@@@ 4P-3657@@@@@, @@@@@ 4P-3658@@@@@, @@@@@ 4P-7159@@@@@, @@@@@ 4P-7158@@@@@, @@@@@ 4P-7160@@@@@, @@@@@ 4P-7161@@@@@, @@@@@ 4P-7162@@@@@, @@@@@ 4P-7163@@@@@, @@@@@ 4P-7164@@@@@, @@@@@ 4P-7362@@@@@, @@@@@ 4P-7166@@@@@, @@@@@ 4P-7165@@@@@, @@@@@ 4P-7166@@@@@
FIELD INSTALLATION

i06009018 SEBP1938

For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1J-9671	[3]	SEAL-O-RING
2.	1S-7057	[1]	GASKET
3.	2W-7212	[1]	GASKET-WATER REGULATOR
4.	3D-2824	[3]	SEAL-O-RING
5.	3J-1907	[5]	SEAL-O-RING
6.	3J-7354	[1]	SEAL-O-RING
7.	3K-0360	[5]	SEAL-O-RING
8.	4F-7391	[1]	SEAL-O-RING
9.	4J-5477	[1]	SEAL-O-RING
10.	4L-9564	[1]	SEAL-O-RING
11.	5F-7054	[1]	SEAL-O-RING
12.	5P-7813	[2]	SEAL-O-RING
13.	6F-6673	[1]	SEAL-O-RING
14.	6I-3033	[1]	LOCK
15.	6V-6228	[6]	SEAL-O-RING
16.	6V-8397	[2]	SEAL-O-RING
17.	7C-0358	[1]	GASKET
18.	7C-1152	[1]	GASKET
19.	7C-1159	[2]	GASKET
20.	7C-7431	[1]	GASKET
21.	7E-0844	[1]	SEAL
22.	7W-2398	[1]	GASKET (OIL DRAIN)
23.	8H-9788	[1]	GASKET
24.	9M-4849	[1]	SEAL-O-RING
25.	9Y-1895	[1]	GASKET
26.	032-8970	[6]	SEAL-O-RING
27.	107-7832	[1]	GASKET
28.	113-6200	[3]	GASKET
29.	113-6250	[1]	GASKET
30.	119-2940	[1]	GASKET (VALVE COVER)
31.	119-3036	[12]	SEAL-VALVE STEM
32.	125-8842	[2]	GASKET
33.	156-0235	[5]	LOCK
34.	188-6126	[1]	GASKET
35.	195-7339	[1]	GASKET-WATER REGULATOR

			FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

			HTTP://DEALER.CAT.COM/RELATED

#SEBP19380679

264-6903: KIT-GASKET

KIT-GASKET

264-6903 KIT-GASKET
KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES.
OPTIONAL FIELD REPLACEMENT ORDER @@@@@518-3979@@@@@
FOR USE WITH @@@@@ 4P-7157@@@@@, @@@@@ 4P-2109@@@@@, @@@@@ 4P-2831@@@@@, @@@@@ 4P-2832@@@@@, @@@@@ 4P-2834@@@@@, @@@@@ 4P-2835@@@@@, @@@@@ 4P-2836@@@@@, @@@@@ 4P-3656@@@@@, @@@@@ 4P-3657@@@@@, @@@@@ 4P-3658@@@@@, @@@@@ 4P-7158@@@@@, @@@@@ 4P-7159@@@@@, @@@@@ 4P-7160@@@@@, @@@@@ 4P-7161@@@@@, @@@@@ 4P-7162@@@@@, @@@@@ 4P-7163@@@@@, @@@@@ 4P-7164@@@@@, @@@@@ 4P-7164@@@@@, @@@@@ 4P-7165@@@@@, @@@@@ 4P-7166@@@@@, @@@@@ 4P-7167@@@@@, @@@@@ 4P-7362@@@@@, E336- ENGINE S/N 2WG 1-UP, E336- ENGINE S/N 2WG 1-UP, E336- ENGINE S/N 2WG 1-UP, E336- ENGINE S/N 2WG 1-UP, E336- ENGINE S/N 2WG 1-UP, E359 - ENGINE S/N 7SF 1-UP, E359- ENGINE S/N 7SF 1-UP, E359- ENGINE S/N 7SF 1-UP, E359- ENGINE S/N 7SF 1-UP, E359- ENGINE S/N 7SF 1-UP, E359- ENGINE S/N 7SF 1-UP, E359- ENGINE S/N 7SF 1-UP, E359- ENGINE S/N 7SF 1-UP, E359- ENGINE S/N 7SF 1-UP, E359 ENGINE S/N 7SF 1-UP, E359- ENGINE S/N 7SF 1-UP, E359- ENGINE S/N 7SF 1-UP, E384- ENGINE S/N 2BK 1-UP, E384- ENGINE S/N 2BK 1-873, E384- ENGINE S/N 2BK 1-873, E384- ENGINE S/N 2BK 1 -873, E384- ENGINE S/N 2BK 1-873, E384- ENGINE S/N 2BK 1-873, E384- ENGINE S/N 2BK 1-873, E384- ENGINE S/N 2BK 1-378, E384- ENGINE S/N 2BK 1-873, E384- ENGINE S/N 2BK 1-873 , E384- ENGINE S/N 2BK 1-873, E384- ENGINE S/N 2BK 1-873, E384- ENGINE S/N 2BK 1-UP, E384- ENGINE S/N 2BK 1-UP, E384- ENGINE S/N 2BK 1-UP , E384- ENGINE S/N 2BK 1-873, E384- ENGINE S/N 2BK 1-873, E384- ENGINE S/N 2BK 1-873, E384- ENGINE S/N 2BK 1-873, E384- ENGINE S/N 2BK 1-873, E384- ENGINE S/N 2BK 1-873, E384- ENGINES S/N 2BK 1-873, E384- ENGINE S/N 2BK 1-873, E384- ENGINE S/N 2BK 1-22382, E384- ENGINE S/N 2BK 1-UP, E384- ENGINE S/N 2BK 1-UP, RM478- ENGINE S/N 4TF 1-UP, MACHINE S/N 6NG 1-UP, E384- ENGINE S/N 2BK 1-UP, RM486- ENGINE S/N 4TF 1-UP,MACHINE S/N 9MG 1-UP, MACHINE S/N 98Z 1750-UP, T652- ENGINE S/N 9ZJ 1-UP, MACHINE S/N 98Z 2760-UP, T750- ENGINE S/N 98Z 1-UP, MACHINE S/N 5SK 1-U

i05813790 SEBP1938

For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
1S-7057	[1]	GASKET
7C-0358	[1]	GASKET
7C-7431	[1]	GASKET
7W-2398	[1]	GASKET (OIL DRAIN)
8H-9788	[1]	GASKET
188-6126	[1]	GASKET
7C-1152	[1]	GASKET
125-8842	[1]	GASKET
375-2467 M	[4]	LOCKNUT-FLANGE (M10X1.5-THD)
3J-1907	[1]	SEAL-O-RING
4F-7391	[1]	SEAL-O-RING
6V-8397	[1]	SEAL-O-RING
9M-4849	[1]	SEAL-O-RING
418-6781 M	[4]	STUD-TAPERLOCK (M10X1.5X40-MM)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED
M		METRIC PART