AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1U2656 CYLINDER GP-BACKHOE STABILIZER-LH (CHGS 00-03) 101.6 MM (4 IN.) BORE X 450.4 MM (17.73 IN.) STROKE BACKHOE S/N 32W1-UP PART OF 5G2150 BACKHOE AR-FIXED PIVOT AN ATTACHMENT 935C II


HYDRAULIC SYSTEM
CYLINDER GP
HYDRAULIC GP
IMPLEMENTS
CONTROL GP
WORK TOOLS
BUCKET GP

TRACK LOADER 935C II TRACK LOADER 5DJ
 935C SERIES II TRACK LOADER / POWER SHIFT / 5DJ00001-UP (MACHINE) POWERED BY 3204 ENGINE SEBP1944 935C II 5DJ   (1990)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BACKHOE STICK
3G-5771 CYLINDER GP-BACKHOE STICK
CYLINDER GP-BACKHOE STABILIZER
1U-2655 CYLINDER GP-BACKHOE STABILIZER
CYLINDER GP-BACKHOE STABILIZER
1U-2656 CYLINDER GP-BACKHOE STABILIZER
CYLINDER GP-RIPPER
7J-9920 CYLINDER GP-RIPPER
BRACE GP-LIFT CYLINDER
5G-1136 BRACE GP-LIFT CYLINDER
MOUNTING GP-CYLINDER
6S-5905 MOUNTING GP-CYLINDER
 

#SEBP19440260
 

1U-2656: CYLINDER GP-BACKHOE STABILIZER

1U2656 CYLINDER GP-BACKHOE STABILIZER-LH (CHGS 00-03)
101.6 MM (4 IN.) BORE X 450.4 MM (17.73 IN.) STROKE
BACKHOE S/N 32W1-UP
PART OF 5G2150 BACKHOE AR-FIXED PIVOT
AN ATTACHMENT
c485667 SEBP1944
1U2656 CYLINDER GP-BACKHOE STABILIZER Parts scheme
  For full view, you need register

Parts for your 935C II TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6J-2797 J [1] RING-WEAR  
2. 5J-5402 [1] SEAL AS  
3. 7J-6469 [1] PISTON  
4. 1U-2654 [1] CYLINDER AS-LH  
5. 8J-4504 [1] BEARING  
6. 9T-3964 [1] HEAD  
7. 8C-9124 J [1] SEAL AS  
8. 5J-8200 J [1] SEAL-U-CUP  
9. 8C-9133 J [1] SEAL  
10. 8J-6907 [1] ROD AS  
11. 8J-4504 [1] BEARING  
12. 7J-6461 [1] CROWN  
13. 7J-5639 [1] BOLT-SELF LOCKING  
14. 1H-8128 J [1] SEAL-O-RING  
15. 2K-6830 J [1] RING-BACK-UP  
16. 5P-8250 [1] WASHER  
17. 4T-5613 [1] RING-WEAR  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  7X-2789 C [1] KIT-SEAL  
    (INCL PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19440261
 

7J-9920: CYLINDER GP-RIPPER

7J9920 CYLINDER GP-RIPPER (CHG 08)
101.6 MM (4 IN.) BORE X 203 MM (8 IN.) STROKE
RIPPER S/N 84U1-UP
PART OF 8J0631 RIPPER AR
AN ATTACHMENT
c614890 SEBP1944
7J9920 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 935C II TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-5639 [1] BOLT-LOCKING (1-14X2.5IN)  
  8J-7415 [1] WASHER-HARD  
2. 7J-9765 [1] CYLINDER AS  
3. 2K-0227 [1] BEARING-SLEEVE  
4. 7J-6469 [1] PISTON  
5. 8C-9124 [1] SEAL AS (50.8MM ID)  
6. 5J-8200 [1] SEAL-U-CUP  
7. 8C-9133 [1] SEAL  
8. 7J-9917 [1] ROD AS  
9. 2K-0227 [1] BEARING-SLEEVE  
10. 6J-2797 [1] RING-WEAR  
11. 9T-9258 C [1] HEAD  
12. 7J-6461 [1] CROWN  
13. 2K-6830 [1] RING-BACKUP  
14. 1H-8128 [1] SEAL-O-RING (94.84MM ID)  
15. 5J-5402 [1] SEAL AS  
16. 4T-5613 C [1] RING-WEAR  
17. 8J-0484 [1] RING-RETAINING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19440262
 

5G-1136: BRACE GP-LIFT CYLINDER

5G1136 BRACE GP-LIFT CYLINDER
c493038 SEBP1944
5G1136 BRACE GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your 935C II TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5G-1135 [1] BRACE AS  
2. 6V-8188 [2] NUT  
  8T-4223 [2] WASHER  
3. 2D-3135 [1] U-BOLT  
 

#SEBP19440263
 

6S-5905: MOUNTING GP-CYLINDER

6S5905 MOUNTING GP-CYLINDER
PART OF 8Y5074, 8Y6783 BUCKET AR-MULTI-PURPOSE
AN ATTACHMENT
c499009 SEBP1944
6S5905 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your 935C II TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [4] FITTING-GREASE  
2. 6S-4785 [2] PIN  
3. 2K-0703 [2] BAR  
4. 8T-9384 [4] BOLT  
5. 8T-4223 [4] WASHER  
6. 6S-5906 [2] PIN  
7. 6V-4432 [2] BOLT  
  6V-8188 [2] NUT  
 

#SEBP19440264
 

8Y-5071: HYDRAULIC AR

8Y5071 HYDRAULIC AR-3 VALVE
FRONT LINES
AN ATTACHMENT
SEBP19440264 SEBP1944
  For full view, you need register

Parts for your 935C II TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  5G-0332 Y [1] CONTROL GP-HYDRAULIC HAND-FRONT  
   
  5G-9399 Y [1] LINES GP-FRONT-HYDRAULIC  
   
  5G-8750 Y [1] MOUNTING GP-ATTACHMENT  
   
  6E-2054 Y [1] VALVE GP-BANK 3  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19440265
 

8Y-5072: HYDRAULIC AR

8Y5072 HYDRAULIC AR-3 VALVE
REAR LINES
FOR USE WITH RIPPER
AN ATTACHMENT
SEBP19440265 SEBP1944
  For full view, you need register

Parts for your 935C II TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  5G-0333 Y [1] CONTROL GP-HYDRAULIC HAND-RIPPER  
   
  5G-0543 Y [1] LINES GP-REAR  
   
  6E-2055 Y [1] VALVE GP-BANK 3  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19440266
 

8Y-5073: HYDRAULIC AR

8Y5073 HYDRAULIC AR-4 VALVE
FRONT & REAR LINES
AN ATTACHMENT
SEBP19440266 SEBP1944
  For full view, you need register

Parts for your 935C II TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  5G-0332 Y [1] CONTROL GP-HYDRAULIC HAND-FRONT  
   
  5G-0333 Y [1] CONTROL GP-HYDRAULIC HAND-RIPPER  
   
  5G-9399 Y [1] LINES GP-FRONT-HYDRAULIC  
   
  5G-0543 Y [1] LINES GP-REAR  
   
  5G-8750 Y [1] MOUNTING GP-ATTACHMENT  
   
  6E-2056 Y [1] VALVE GP-BANK 4  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19440267
 

5G-3960: CONTROL GP-BUCKET

5G3960 CONTROL GP-BUCKET
5G3463 TIP AS IS AVAILABLE FOR REPAIR OF LIFT ARMS
NOTE: QUANTITIES SHOWN ARE REQUIRED FOR RH & LH SIDES
c494817 SEBP1944
5G3960 CONTROL GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 935C II TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-2566 [6] BOLT  
2. 5G-2318 JB [4] WASHER (1.6MM THK)  
3. 3B-8486 [2] FITTING  
4. 5G-3961 [1] ARM AS  
5. 6S-3463 [8] BEARING-SLEEVE  
6. 6S-3465 [2] BEARING-SLEEVE  
7. 6S-3459 [2] BEARING-SLEEVE  
8. 2R-0970 B [4] PLATE  
9. 6S-3473 [2] PIN AS  
10. 7X-3197 [8] BOLT  
11. 6V-8188 [2] NUT  
12. 5G-4066 [2] PIN  
13. 7K-9201 [12] SEAL-LIP TYPE  
14. 3B-8489 [10] FITTING-GREASE  
15. 5G-3966 [4] LEVER  
16. 5G-3967 [2] LINK AS  
17. 6S-3465 [2] BEARING-SLEEVE  
18. 6S-3474 [2] PIN AS  
19. 7K-9360 [2] PIN  
20. 6S-3461 JB [10] WASHER (3MM THK)  
21. 5P-0093 [12] SEAL-LIP TYPE  
22. 6V-4432 [2] BOLT  
23. 6S-3457 [2] PIN  
24. 8C-4436 [4] BOLT  
25. 2K-0703 [2] BAR  
26. 6S-3472 [2] PIN AS  
27. 6V-8181 [8] NUT-FULL  
28. 7X-0588 [16] WASHER-HARD  
29. 6S-9124 [12] PLATE  
30. 9G-5211 [4] SPACER  
31. 8T-4223 [4] WASHER  
   
    J-USE SAME THICKNESS
    WASHERS ON INBOARD
    SIDE OF EACH ARM AS.
  B   USE AS REQUIRED
 

#SEBP19440268
 

8Y-6783: BUCKET AR-MULTIPURPOSE

8Y6783 BUCKET AR-MULTI-PURPOSE
.95 CU M (1.25 CU YD)) CAPACITY. FOR USE WITH 3 VALVE HYDRAULIC CONTROL
AN ATTACHMENT
SEBP19440268 SEBP1944
  For full view, you need register

Parts for your 935C II TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  8Y-2171 Y [1] BUCKET GP-MULTI-PURPOSE  
   
  3G-7365 Y [2] CYLINDER GP-BUCKET  
   
  8Y-6782 Y [1] LINES GP-HYDRAULIC  
   
  6S-5905 Y [1] MOUNTING GP-CYLINDER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19440269
 

8Y-5074: BUCKET AR-MULTIPURPOSE

8Y5074 BUCKET AR-MULTI-PURPOSE
AN ATTACHMENT
SEBP19440269 SEBP1944
  For full view, you need register

Parts for your 935C II TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  8Y-5075 Y [1] BUCKET GP-MULTI-PURPOSE  
   
  3G-7365 Y [2] CYLINDER GP-BUCKET  
   
  5G-1652 Y [1] LINES GP-HYDRAULIC  
   
  6S-5905 Y [1] MOUNTING GP-CYLINDER  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Specifications
Boom Cylinder<BR> (3G5767)
D3B & 931B BACKHOE
Stick Cylinder<BR> (3G5771)
D3B & 931B BACKHOE
Bucket Cylinder<BR> (3G5771)
D3B & 931B BACKHOE
Stabilizer Cylinder (Side Shift)<BR> (3G6792)
D3B & 931B BACKHOE
Stabilizer Cylinders (Fixed Pivot)<BR> (1U2655 &amp; 1U2656)
D3B & 931B BACKHOE
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Disassembly and Assembly
Bucket Cylinder
D3B & 931B BACKHOE
Boom And Boom Cylinder
D3B & 931B BACKHOE
Boom And Boom Cylinder (SS)
D3B & 931B BACKHOE
Stick Cylinder
D3B & 931B BACKHOE
Stabilizer Cylinders
D3B & 931B BACKHOE
Stabilizer Cylinder (Sideshift)
D3B & 931B BACKHOE
Hydraulic Cylinders
D3B & 931B BACKHOE
Service Magazine
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28

Caterpillar Parts SIS Catalog 935C II :

CYLINDER GP-BACKHOE STABILIZER
1U-2655 CYLINDER GP-BACKHOE STABILIZER
CYLINDER GP-BACKHOE STICK
3G-5771 CYLINDER GP-BACKHOE STICK
CYLINDER GP-BACKHOE BUCKET
3G-5905 CYLINDER GP-BACKHOE BUCKET
CYLINDER GP-BACKHOE BOOM
3G-5767 CYLINDER GP-BACKHOE BOOM
VALVE GP-DIVERTER
3G-2887 VALVE GP-DIVERTER
VALVE & LINES GP
5G-3692 VALVE & LINES GP
VALVE GP
6T-2289 VALVE GP
VALVE GP-RELIEF
4T-2591 VALVE GP-RELIEF
CYLINDER GP-RIPPER
7J-9920 CYLINDER GP-RIPPER
BRACE GP-LIFT CYLINDER
5G-1136 BRACE GP-LIFT CYLINDER
MOUNTING GP-CYLINDER
6S-5905 MOUNTING GP-CYLINDER
8Y-5071 HYDRAULIC AR
8Y-5072 HYDRAULIC AR
8Y-5073 HYDRAULIC AR
CONTROL GP-BUCKET
5G-3960 CONTROL GP-BUCKET
8Y-6783 BUCKET AR-MULTIPURPOSE

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.