AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

769C TRUCK 01X05474-06599 (MACHINE) POWERED BY 3408 ENGINE FUEL SYSTEM Caterpillar SIS



TRUCK 769C TRUCK 01X
 769C TRUCK 01X05474-06599 (MACHINE) POWERED BY 3408 ENGINE SEBP1945 769C 01X   (1978)

Parts group 769C:

  For full view, you need register
FUEL SYSTEM
CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
6N-6209 CONTROL GP-FUEL RATIO
6N6209 CONTROL GP-FUEL RATIO
2W3157-PAGE 84
CONTROL GP-FUEL RATIO
2W-3157 CONTROL GP-FUEL RATIO
2W3157 CONTROL GP-FUEL RATIO*R
ENGINE S/N 48W30900-32247
PART OF 6N6209 CONTROL-FUEL RATIO
CONTROL GP-FUEL RATIO
2W-3157 CONTROL GP-FUEL RATIO
2W3157 CONTROL GP-FUEL RATIO*R
ENGINE S/N 48W32248-UP
PART OF 6N6209 CONTROL-FUEL RATIO
CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
2G-8970 CONTROL GP-GOVERNOR
2G8970 CONTROL GP-GOVERNOR
CAB AREA
S/N 1X5474-6164
CONTROL GP-GOVERNOR
2G-8970 CONTROL GP-GOVERNOR
2G8970 CONTROL GP-GOVERNOR
CAB AREA
S/N 1X6165-UP
CONTROL GP-GOVERNOR
9D-8905 CONTROL GP-GOVERNOR
9D8905 CONTROL GP-GOVERNOR
CHASSIS AREA
S/N 1X5340,5474-6000
CONTROL GP-GOVERNOR
9D-8905 CONTROL GP-GOVERNOR
9D8905 CONTROL GP-GOVERNOR
CHASSIS AREA
S/N 1X6001-UP
1013431-PAGE 71.02
VALVE GP-SOLENOID
101-3430 VALVE GP-SOLENOID
1013430 VALVE GP-SOLENOID
S/N 1X6001-UP
PART OF 1013431 VALVE & MOUNTING
VALVE & MOUNTING GP
101-3431 VALVE & MOUNTING GP
1013431 VALVE & MOUNTING GP
S/N 1X6001-UP
1013430-PAGE 71.02
PART OF 9D8905 CONTROL-GOVERNOR
DRIVE GP-TACHOMETER
DRIVE GP-TACHOMETER
7N-9663 DRIVE GP-TACHOMETER
7N9663 DRIVE GP-TACHOMETER
FILTER GP-FUEL
FILTER GP-FUEL
1W-4757 FILTER GP-FUEL
1W4757 FILTER GP-FUEL
FILTER GP-PRIMARY FUEL
8H-4681 FILTER GP-PRIMARY FUEL
8H4681 FILTER GP-PRIMARY FUEL
GOVERNOR GP
DRIVE GP-GOVERNOR & FUEL PUMP
6N-3195 DRIVE GP-GOVERNOR & FUEL PUMP
6N3195 DRIVE GP-GOVERNOR & FUEL PUMP
PUMP GP-GOV, FUEL INJ & TFR
2W-8961 PUMP GP-GOV, FUEL INJ & TFR
2W8961 GOVERNOR, FUEL INJECTION, FUEL TRANSFER PUMP GP
ENGINE S/N 48W30900-35194
4W2922-PAGE 76, 4W6012-PAGE 80, 4N1101-PAGE 73.02
7W0641 & 9Y3764-PAGE 75
PUMP GP-GOV, FUEL INJ & TFR
101-1665 PUMP GP-GOV, FUEL INJ & TFR
1011665 GOVERNOR,FUEL INJECTION & TRANSFER PUMP GP
ENGINE S/N 48W35195-UP
4N1101-PAGE 73.02, 4W2922-PAGE 76, 1011666-PAGE 81.01,
9Y3764 & 7W0641-PAGE 75
GOVERNOR GP
4W-2922 GOVERNOR GP
4W2922 GOVERNOR GP-PART 1 OF 2
PART OF 2W8961 & 1011665 GOVERNOR, FUEL INJECTION, FUEL TRANSFER PUMPS
GOVERNOR GP
4W-2922 GOVERNOR GP
4W2922 GOVERNOR GP-PART 2 OF 2
4W2921-PAGE 78
PART OF 2W8961 & 1011665 GOVERNOR, FUEL INJECTION, FUEL TRANSFER PUMPS
PLATE GP-GOVERNOR ADAPTER
4W-2921 PLATE GP-GOVERNOR ADAPTER
4W2921 PLATE GP-GOVERNOR ADAPTER
6N5314-PAGE 79
PART OF 4W2922 GOVERNOR
PISTON GP-GOVERNOR SERVO
6N-5314 PISTON GP-GOVERNOR SERVO
6N5314 PISTON GP-GOVERNOR SERVO
PART OF 4W2921 PLATE-GOVERNOR ADAPTER
HEATER GP-FUEL
RETROFIT GP-FUEL HEATER
8N-9527 RETROFIT GP-FUEL HEATER
8N9527 RETROFIT GP-FUEL HEATER
PROVIDES HEAT TO FUEL BEFORE ENTERING SPIN-ON FUEL FILTER
FIELD INSTALLATION
LINES GP-DRAIN
LINES GP-DRAIN
7N-8243 LINES GP-DRAIN
7N8243 LINES GP-DRAIN
FUEL TRANSFER PUMP
LINES GP-FUEL
LINES GP-FUEL
9D-8970 LINES GP-FUEL
9D8970 LINES GP-FUEL
LINES GP-FUEL FILTER
6N-1880 LINES GP-FUEL FILTER
6N1880 LINES GP-FUEL FILTER-PART 1 OF 2
LINES GP-FUEL FILTER
6N-1880 LINES GP-FUEL FILTER
6N1880 LINES GP-FUEL FILTER-PART 2 OF 2
LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7E-6847 LINES GP-FUEL INJECTION
7E6847 LINES GP-FUEL INJECTION
ENGINE S/N 48W30900-34135
4W7018-PAGE 88, 7C7429-PAGE 87
LINES GP-FUEL INJECTION
7E-6847 LINES GP-FUEL INJECTION
7E6847 LINES GP-FUEL INJECTION
ENGINE S/N 48W34136-UP
4W7018-PAGE 88, 6I0030-PAGE 87.01
LINES GP-FUEL INJECTION
7C-7429 LINES GP-FUEL INJECTION
7C7429 LINES GP-FUEL INJECTION
ENGINE S/N 48W30900-34135
PART OF 7E6847 LINES-FUEL INJECTION
LINES GP-FUEL INJECTION
6I-0030 LINES GP-FUEL INJECTION
6I0030 LINES GP-FUEL INJECTION
S/N 48W34136-UP
PART OF 7E6847 LINES-FUEL INJECTION
NOZZLE AS-FUEL VALVE
NOZZLE AS-FUEL VALVE
4W-7018 NOZZLE AS-FUEL VALVE
4W7018 NOZZLE AS-FUEL VALVE*R
PART OF 7E6847 LINES-FUEL INJECTION
PUMP GP-FUEL INJECTION
PUMP GP-GOV, FUEL INJ & TFR
2W-8961 PUMP GP-GOV, FUEL INJ & TFR
2W8961 GOVERNOR, FUEL INJECTION, FUEL TRANSFER PUMP GP
ENGINE S/N 48W30900-35194
4W2922-PAGE 76, 4W6012-PAGE 80, 4N1101-PAGE 73.02
7W0641 & 9Y3764-PAGE 75
PUMP GP-GOV, FUEL INJ & TFR
101-1665 PUMP GP-GOV, FUEL INJ & TFR
1011665 GOVERNOR,FUEL INJECTION & TRANSFER PUMP GP
ENGINE S/N 48W35195-UP
4N1101-PAGE 73.02, 4W2922-PAGE 76, 1011666-PAGE 81.01,
9Y3764 & 7W0641-PAGE 75
FASTENER GP-FUEL INJ PUMP
9Y-3764 FASTENER GP-FUEL INJ PUMP
9Y3764 FASTENER GP
PART OF 2W8961 & 1011665 GOVERNOR, FUEL INJECTION, FUEL TRANSFER PUMPS
PUMP GP-FUEL INJECTION
7W-0561 PUMP GP-FUEL INJECTION
7W0561 PUMP GP-FUEL INJECTION
PART OF 4W6012 & 1011666 PUMPS-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-6012 PUMP GP-FUEL INJECTION
4W6012 PUMP GP-FUEL INJECTION-PART 1 OF 2
ENGINE S/N 48W30900-35194
7N4574-PAGE 82, 7W0561-PAGE 79
PART OF 2W8961 GOVERNOR, FUEL INJECTION, FUEL TRANSFER PUMP
PUMP GP-FUEL INJECTION
4W-6012 PUMP GP-FUEL INJECTION
4W6012 PUMP GP-FUEL INJECTION-PART 2 OF 2
ENGINE S/N 48W30900-35194
PART OF 2W8961 GOVERNOR, FUEL INJECTION, FUEL TRANSFER PUMP
PUMP GP-FUEL INJECTION
101-1666 PUMP GP-FUEL INJECTION
1011666 PUMP GP-FUEL INJECTION-PART 1 OF 2
ENGINE S/N 48W35195-UP
7N4574-PAGE 82, 7W0561-PAGE 79
PART OF 1011665 GOVERNOR, FUEL INJECTION, FUEL TRANSFER PUMP
PUMP GP-FUEL INJECTION
101-1666 PUMP GP-FUEL INJECTION
1011666 PUMP GP-FUEL INJECTION-PART 2 OF 2
ENGINE S/N 48W35195-UP
PART OF 1011665 GOVERNOR, FUEL INJECTION, FUEL TRANSFER PUMP
HOUSING AS-FUEL PUMP
7N-4574 HOUSING AS-FUEL PUMP
7N4574 HOUSING AS-PUMP
PART OF 4W6012 & 1011666 PUMPS-FUEL INJECTION
PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
8N-7763 PUMP GP-FUEL PRIMING
8N7763 PUMP GP-FUEL PRIMING
PUMP GP-FUEL TRANSFER
DRIVE GP-GOVERNOR & FUEL PUMP
6N-3195 DRIVE GP-GOVERNOR & FUEL PUMP
6N3195 DRIVE GP-GOVERNOR & FUEL PUMP
PUMP GP-GOV, FUEL INJ & TFR
2W-8961 PUMP GP-GOV, FUEL INJ & TFR
2W8961 GOVERNOR, FUEL INJECTION, FUEL TRANSFER PUMP GP
ENGINE S/N 48W30900-35194
4W2922-PAGE 76, 4W6012-PAGE 80, 4N1101-PAGE 73.02
7W0641 & 9Y3764-PAGE 75
PUMP GP-GOV, FUEL INJ & TFR
101-1665 PUMP GP-GOV, FUEL INJ & TFR
1011665 GOVERNOR,FUEL INJECTION & TRANSFER PUMP GP
ENGINE S/N 48W35195-UP
4N1101-PAGE 73.02, 4W2922-PAGE 76, 1011666-PAGE 81.01,
9Y3764 & 7W0641-PAGE 75
PUMP GP-FUEL TRANSFER
4N-1101 PUMP GP-FUEL TRANSFER
4N1101 PUMP GP-FUEL TRANSFER
4W5477-PAGE 74
PART OF 2W8961 & 1011665 GOVERNOR, FUEL INJECTION, FUEL TRANSFER PUMPS
PUMP GP-FUEL TRANSFER
4W-5477 PUMP GP-FUEL TRANSFER
4W5477 PUMP GP-FUEL TRANSFER-SINGLE SECTION
PART OF 4N1101 PUMP-FUEL TRANSFER
TANK GP-FUEL
TANK GP-FUEL
5T-2476 TANK GP-FUEL
5T2476 TANK GP-FUEL
530 L (140 U.S. GALLONS)
S/N 1X5474-6361
TANK GP-FUEL
5T-2476 TANK GP-FUEL
5T2476 TANK GP-FUEL
530 L (140 U.S.GALLONS)
S/N 1X6362-UP
TORQUE CONTROL GP
TORQUE CONTROL GP
7W-0641 TORQUE CONTROL GP
7W0641 CONTROL GP-TORQUE
PART OF 2W8961 & 1011665 GOVERNOR, FUEL INJECTION, FUEL TRANSFER PUMPS
VALVE GP-SOLENOID
VALVE GP-SOLENOID
101-3430 VALVE GP-SOLENOID
1013430 VALVE GP-SOLENOID
S/N 1X6001-UP
PART OF 1013431 VALVE & MOUNTING

Information:

(For parts list, see above)

Service Magazine
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Technical Information Bulletin
Air Fuel Ratio Control (AFRC) Adjustment To Help Reduce Excessive Black Smoke During Acceleration
Air Fuel Ratio Control (AFRC) Adjustment To Help Reduce Excessive Black Smoke During Acceleration
Specifications
Fuel Ratio Control
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Service Magazine
Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly{1278}
1981/01/19
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15
Improvements Made To Fuel Ratio Control {1278}
1982/11/29
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Service Letter-NACD
A Directional Shift Management System Needs To Be Installed On Certain 768C Tractors; 769C, 771C, 773B, And 775B Trucks; And OEM Power Modules
A Directional Shift Management System Needs To Be Installed On Certain 768C Tractors; 769C, 771C, 773B, And 775B Trucks; And OEM Power Modules
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Technical Information Bulletin
Air Fuel Ratio Control (AFRC) Adjustment To Help Reduce Excessive Black Smoke During Acceleration
Air Fuel Ratio Control (AFRC) Adjustment To Help Reduce Excessive Black Smoke During Acceleration
Specifications
Fuel Ratio Control
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Service Letter-China
A Directional Shift Management System Needs To Be Installed On Certain 768C Tractors; 769C, 771C, 773B, And 775B Trucks; And OEM Power Modules
A Directional Shift Management System Needs To Be Installed On Certain 768C Tractors; 769C, 771C, 773B, And 775B Trucks; And OEM Power Modules
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Governor Control Valve
768C & 769C TRACTOR & 769C TRUCK VEHICLE SYSTEMS
Governor Control Cylinder
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Governor Control Cylinder
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Governor Control Cylinder
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Governor Control Valve
769C TRUCK VEHICLE SYSTEMS
Service Magazine
Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly{1278}
1981/01/19
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15
Improvements Made To Fuel Ratio Control {1278}
1982/11/29
Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage{1265}
1983/07/04
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Directional Shift Management Used To Improve Drive Line Life{1265}
1993/07/12
Directional Shift Management Used To Improve Drive Line Life{1265}
1993/09/27
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Technical Information Bulletin
Air Fuel Ratio Control (AFRC) Adjustment To Help Reduce Excessive Black Smoke During Acceleration
Air Fuel Ratio Control (AFRC) Adjustment To Help Reduce Excessive Black Smoke During Acceleration
Specifications
Fuel Ratio Control
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Ratio Control
3408 VEHICULAR ENGINE
Disassembly and Assembly
Fuel Ratio Control
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Ratio Control
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Service Magazine
Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly{1278}
1981/01/19
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15
Improvements Made To Fuel Ratio Control {1278}
1982/11/29
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of 2N2384 And 2N2385 Solenoids{1259, 1400}
Installation Of 2N2384 And 2N2385 Solenoids{1259, 1400}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
A Directional Shift Management System Needs To Be Installed On Certain 768C Tractors; 769C, 771C, 773B, And 775B Trucks; And OEM Power Modules
A Directional Shift Management System Needs To Be Installed On Certain 768C Tractors; 769C, 771C, 773B, And 775B Trucks; And OEM Power Modules
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Specifications
Governor Control Group
3408 VEHICULAR ENGINE
Service Letter-China
A Directional Shift Management System Needs To Be Installed On Certain 768C Tractors; 769C, 771C, 773B, And 775B Trucks; And OEM Power Modules
A Directional Shift Management System Needs To Be Installed On Certain 768C Tractors; 769C, 771C, 773B, And 775B Trucks; And OEM Power Modules
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Governor Control Valve
768C & 769C TRACTOR & 769C TRUCK VEHICLE SYSTEMS
Governor Control Cylinder
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Governor Control Cylinder
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Governor Control Valve
768C TRACTOR & 769C TRUCK MACHINE SYSTEMS
Governor Control Cylinder
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Governor Control Valve
769C TRUCK VEHICLE SYSTEMS
Service Magazine
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15
Fuel Rack Slots Have Improved Wear Resistance{1257}
1982/05/10
Improvements Made To Fuel Ratio Control {1278}
1982/11/29
Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage{1265}
1983/07/04
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
New Fuel Shutoff Solenoid Assembly Used{1259}
1988/10/31
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Directional Shift Management Used To Improve Drive Line Life{1265}
1993/07/12
Directional Shift Management Used To Improve Drive Line Life{1265}
1993/09/27
Specifications
Tachometer Drive
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Tachometer Drive Group
3408 VEHICULAR ENGINE
Service Magazine
Stronger Output Shaft Now Used In 2N3909 Tachometer Drive Adapter{7462}
1979/04/02
Engine News
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1250, 1261}
2012/08/21
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Special Instruction
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Specifications
Primary Fuel Filter And Fuel Filter Base
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Primary Fuel Filter
3408 VEHICULAR ENGINE
Fuel Filter
3408 VEHICULAR ENGINE
Fuel Filter Base
3408E and 3412E Engines for Caterpillar Built Machines
Fuel Filter Base
3408E and 3412E Engines for Caterpillar Built Machines
Fuel Filter (Primary)
3408E and 3412E Engines for Caterpillar Built Machines
Fuel Filter Base
3408E and 3412E Engines for Caterpillar Built Machines
Tool Operating Manual
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Disassembly and Assembly
Fuel Filter Base
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Fuel Filter Base
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Filter Base - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Fuel Filter Base - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
New Fuel Priming Pump Used{1258}
1983/06/20
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Improved 1R-0712 Fuel Filter Provides Improved Sealing{1261}
1994/03/28
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES® Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
Improved Seal on Fuel Filter {1261}
2005/09/12
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2007/07/30
New Primary Fuel Filters are Available {1260, 1261}
2008/07/14
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Service Magazine
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Special Instruction
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}
Technical Information Bulletin
Air Fuel Ratio Control (AFRC) Adjustment To Help Reduce Excessive Black Smoke During Acceleration
Air Fuel Ratio Control (AFRC) Adjustment To Help Reduce Excessive Black Smoke During Acceleration
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Reuse And Salvage Guidelines
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Service Magazine
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
5P7437 Adapter (Part Of 8T5301 Diesel Timing Adapter Group) Must Be Modified To Work On Current Fuel Lines.{0782}
1992/02/03
New Guideline For Product Information, SEBF8340, &quot; Fuel Systems Troubleshooting Guide For 3204, 3300, And 3400 Engines With New Scroll Fuel Systems (NSFS)&quot; Available {0374,1250}
1998/06/22
Use 154-8100 Fuel System Arrangement And 154-8101 Fuel System Group To Measure Engine Fuel Flow{1250,0782}
1999/06/01
Brighter Dash Lamps Used For Better Visibility{7481}
1994/06/13
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 9G8187 Cold Start Relay{1289}
Installation Of 9G8187 Cold Start Relay{1289}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Governor
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump Housing
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Governor Drive And Oil Pump
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Governor And Fuel Pump Drive
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump Drive
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Governors
3408 VEHICULAR ENGINE
Governor Drive And Oil Pump
3408 VEHICULAR ENGINE
Governor Control Group
3408 VEHICULAR ENGINE
Disassembly and Assembly
Governor Control Valve
768C & 769C TRACTOR & 769C TRUCK VEHICLE SYSTEMS
Fuel Injection Pump Housing &amp; Governor
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump Housing
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Governor
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Governor Shutoff Solenoid
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Governor Control Cylinder
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Automatic Timing Advance
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Fuel Injection Pump Housing And Governor
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Governor
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Governor Shutoff Solenoid
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Governor Control Cylinder
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Voltage Protector
769, 773B, & 777 TRUCKS OPERATOR'S STATION
Governor Shut-Off Relay
769, 773B, & 777 TRUCKS OPERATOR'S STATION
Governor Shut-Off Switch, Engine Start-Stop Circuit Breaker
769, 773B, & 777 TRUCKS OPERATOR'S STATION
Fuel Transfer Pump
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Injection Pumps
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Injection Pump Housing And Governor
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Governor
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Governor Shutoff Solenoid
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Governor Control Cylinder
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Transmission Governor And Drive
768C TRACTOR & 769C TRUCK POWER TRAIN DISASSEMBLY & ASSEMBLY
Transmission Governor
768C TRACTOR & 769C TRUCK POWER TRAIN DISASSEMBLY & ASSEMBLY
Governor Air Reservoir
769C TRUCK VEHICLE SYSTEMS
Governor Air Reservoir Check Valve
769C TRUCK VEHICLE SYSTEMS
Governor Control Valve
769C TRUCK VEHICLE SYSTEMS
Service Magazine
Modification Of 5P1768 Pointer Assembly Necessary For Use On Some Fuel Injection Pump Housings{1253,0653}
1980/03/31
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22
Fuel Rack Slots Have Improved Wear Resistance{1257}
1982/05/10
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
New Specification For Clearance Between Fuel Rack Slot And Cross Link{1257}
1983/05/16
Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage{1265}
1983/07/04
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Procedure To Remove Sharp Edges From Fuel Racks {1257,1253}
1984/02/06
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Changes To Fuel Systems{1250,1251,1252,1253,1254,1100}
1985/03/25
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Fuel Transfer Pump Shaft With Chromium Plate{1256}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Correct Adjustment Of The Sensor Assembly For The Transmission Governor Is Important{7463,3151}
1979/10/01
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Improved Fuel Pump Bonnet Seal Has Better Heat Resistance {1251}
1994/09/12
Procedure To Increase Fuel Transfer Pump Pressure {1256}
1995/04/10
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/25
Special Instruction
Installation Of 1N3374 Fuel Heater Group{1296}
Installation Of 1N3374 Fuel Heater Group{1296}
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Ether Starting Aid Groups Are Now Available{1456}
1979/01/22
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Correction to Parts Book in Regard to Gasket Kits for the 2W-0769 Engine Arrangement {1250}
2000/09/18
Special Instruction
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Installation of New Hose Assembly for Unit Injector Hydraulic Pump{1274, 1307, 1714}
Installation of New Hose Assembly for Unit Injector Hydraulic Pump{1274, 1307, 1714}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Air Fuel Ratio Control (AFRC) Adjustment To Help Reduce Excessive Black Smoke During Acceleration
Air Fuel Ratio Control (AFRC) Adjustment To Help Reduce Excessive Black Smoke During Acceleration
Specifications
Primary Fuel Filter And Fuel Filter Base
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Disassembly and Assembly
Fuel Injection Lines
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Valves (Precombustion)
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Service Magazine
Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems{1252,1254}
1980/02/25
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly{1278}
1981/01/19
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
New Washers Permit Locks To Hold Better{1252}
1982/01/25
New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15
New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Improvements Made To Fuel Ratio Control {1278}
1982/11/29
New Fuel Nozzle Adapters Used{1106}
1983/05/09
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position{1106,1252}
1984/02/27
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Changes To Fuel Systems{1250,1251,1252,1253,1254,1100}
1985/03/25
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
New Cylinder Heads And Fuel Nozzle Adapters Used{1101,1106}
1985/07/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
New Fuel Injection Lines Groups Use A Different Fuel Injection Nozzle Assembly{1254}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
5P7437 Adapter (Part Of 8T5301 Diesel Timing Adapter Group) Must Be Modified To Work On Current Fuel Lines.{0782}
1992/02/03
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/05/17
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/11/15
Improved 1R-0712 Fuel Filter Provides Improved Sealing{1261}
1994/03/28
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
Load Piston Body Changes In ICM Pressure Control Valve Group{3073,3030}
1998/05/04
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
Special Instruction
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Service Letter-NACD
Product Support Program For Installing New Fuel Injection Line Groups On Certain D9N Tractors, 589 Pipelayers 631E Tractors, 637E Tractors, 657E Scrapers, 768C Tractors, 769C Trucks, 834B Tractors, And 988B Loaders
Product Support Program For Installing New Fuel Injection Line Groups On Certain D9N Tractors, 589 Pipelayers 631E Tractors, 637E Tractors, 657E Scrapers, 768C Tractors, 769C Trucks, 834B Tractors, And 988B Loaders
1590835, 1388754, 1313098, 1590838, 1388755, 1313099, 0r9420, And 0r8624 Injectors Need To Be Inspected For Special Instructions
1590835, 1388754, 1313098, 1590838, 1388755, 1313099, 0r9420, And 0r8624 Injectors Need To Be Inspected For Special Instructions
Service Letter-Australia
Product Support Program For Installing New Fuel Injection Line Groups On Certain D9N Tractors, 589 Pipelayers 631E Tractors, 637E Tractors, 657E Scrapers, 768C Tractors, 769C Trucks, 834B Tractors, And 988B Loaders
Product Support Program For Installing New Fuel Injection Line Groups On Certain D9N Tractors, 589 Pipelayers 631E Tractors, 637E Tractors, 657E Scrapers, 768C Tractors, 769C Trucks, 834B Tractors, And 988B Loaders
1590835, 1388754, 1313098, 1590838, 1388755, 1313099, 0r9420, And 0r8624 Injectors Need To Be Inspected For Special Instructions
1590835, 1388754, 1313098, 1590838, 1388755, 1313099, 0r9420, And 0r8624 Injectors Need To Be Inspected For Special Instructions
Service Letter-CFEL
Product Support Program For Installing New Fuel Injection Line Groups On Certain D9N Tractors, 589 Pipelayers 631E Tractors, 637E Tractors, 657E Scrapers, 768C Tractors, 769C Trucks, 834B Tractors, And 988B Loaders
Product Support Program For Installing New Fuel Injection Line Groups On Certain D9N Tractors, 589 Pipelayers 631E Tractors, 637E Tractors, 657E Scrapers, 768C Tractors, 769C Trucks, 834B Tractors, And 988B Loaders
1590835, 1388754, 1313098, 1590838, 1388755, 1313099, 0r9420, And 0r8624 Injectors Need To Be Inspected For Special Instructions
1590835, 1388754, 1313098, 1590838, 1388755, 1313099, 0r9420, And 0r8624 Injectors Need To Be Inspected For Special Instructions
Service Letter-CSARL
Product Support Program For Installing New Fuel Injection Line Groups On Certain D9N Tractors, 589 Pipelayers 631E Tractors, 637E Tractors, 657E Scrapers, 768C Tractors, 769C Trucks, 834B Tractors, And 988B Loaders
Product Support Program For Installing New Fuel Injection Line Groups On Certain D9N Tractors, 589 Pipelayers 631E Tractors, 637E Tractors, 657E Scrapers, 768C Tractors, 769C Trucks, 834B Tractors, And 988B Loaders
1590835, 1388754, 1313098, 1590838, 1388755, 1313099, 0r9420, And 0r8624 Injectors Need To Be Inspected For Special Instructions
1590835, 1388754, 1313098, 1590838, 1388755, 1313099, 0r9420, And 0r8624 Injectors Need To Be Inspected For Special Instructions
Service Letter-Americas
Product Support Program For Installing New Fuel Injection Line Groups On Certain D9N Tractors, 589 Pipelayers 631E Tractors, 637E Tractors, 657E Scrapers, 768C Tractors, 769C Trucks, 834B Tractors, And 988B Loaders
Product Support Program For Installing New Fuel Injection Line Groups On Certain D9N Tractors, 589 Pipelayers 631E Tractors, 637E Tractors, 657E Scrapers, 768C Tractors, 769C Trucks, 834B Tractors, And 988B Loaders
1590835, 1388754, 1313098, 1590838, 1388755, 1313099, 0r9420, And 0r8624 Injectors Need To Be Inspected For Special Instructions
1590835, 1388754, 1313098, 1590838, 1388755, 1313099, 0r9420, And 0r8624 Injectors Need To Be Inspected For Special Instructions
Service Letter-Brazil
Product Support Program For Installing New Fuel Injection Line Groups On Certain D9N Tractors, 589 Pipelayers 631E Tractors, 637E Tractors, 657E Scrapers, 768C Tractors, 769C Trucks, 834B Tractors, And 988B Loaders
Product Support Program For Installing New Fuel Injection Line Groups On Certain D9N Tractors, 589 Pipelayers 631E Tractors, 637E Tractors, 657E Scrapers, 768C Tractors, 769C Trucks, 834B Tractors, And 988B Loaders
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Injection Nozzle And Adapter
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Lines
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Lines
3408 VEHICULAR ENGINE
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
Service Letter-China
Product Support Program For Installing New Fuel Injection Line Groups On Certain D9N Tractors, 589 Pipelayers 631E Tractors, 637E Tractors, 657E Scrapers, 768C Tractors, 769C Trucks, 834B Tractors, And 988B Loaders
Product Support Program For Installing New Fuel Injection Line Groups On Certain D9N Tractors, 589 Pipelayers 631E Tractors, 637E Tractors, 657E Scrapers, 768C Tractors, 769C Trucks, 834B Tractors, And 988B Loaders
1590835, 1388754, 1313098, 1590838, 1388755, 1313099, 0r9420, And 0r8624 Injectors Need To Be Inspected For Special Instructions
1590835, 1388754, 1313098, 1590838, 1388755, 1313099, 0r9420, And 0r8624 Injectors Need To Be Inspected For Special Instructions
Service Letter-Asia
Product Support Program For Installing New Fuel Injection Line Groups On Certain D9N Tractors, 589 Pipelayers 631E Tractors, 637E Tractors, 657E Scrapers, 768C Tractors, 769C Trucks, 834B Tractors, And 988B Loaders
Product Support Program For Installing New Fuel Injection Line Groups On Certain D9N Tractors, 589 Pipelayers 631E Tractors, 637E Tractors, 657E Scrapers, 768C Tractors, 769C Trucks, 834B Tractors, And 988B Loaders
1590835, 1388754, 1313098, 1590838, 1388755, 1313099, 0r9420, And 0r8624 Injectors Need To Be Inspected For Special Instructions
1590835, 1388754, 1313098, 1590838, 1388755, 1313099, 0r9420, And 0r8624 Injectors Need To Be Inspected For Special Instructions
Service Letter-APD
Product Support Program For Installing New Fuel Injection Line Groups On Certain D9N Tractors, 589 Pipelayers 631E Tractors, 637E Tractors, 657E Scrapers, 768C Tractors, 769C Trucks, 834B Tractors, And 988B Loaders
Product Support Program For Installing New Fuel Injection Line Groups On Certain D9N Tractors, 589 Pipelayers 631E Tractors, 637E Tractors, 657E Scrapers, 768C Tractors, 769C Trucks, 834B Tractors, And 988B Loaders
1590835, 1388754, 1313098, 1590838, 1388755, 1313099, 0r9420, And 0r8624 Injectors Need To Be Inspected For Special Instructions
1590835, 1388754, 1313098, 1590838, 1388755, 1313099, 0r9420, And 0r8624 Injectors Need To Be Inspected For Special Instructions
Disassembly and Assembly
Fuel Injection Lines
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Nozzles &amp; Adapters
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Lines
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Fuel Injection Nozzles (Direct Injection)
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Fuel Injection Nozzle Adapters (Direct Injection-Earlier)
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Fuel Injection Nozzle Adapters
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Fuel Injection Nozzles And Adapters
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Fuel Injection Lines
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Injection Valves (Precombustion)
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Injection Nozzles (Direct Injection - Later)
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Injection Nozzles And Adapters (Later)
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Service Magazine
Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems{1252,1254}
1980/02/25
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New Washers Permit Locks To Hold Better{1252}
1982/01/25
New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position{1106,1252}
1984/02/27
Changes To Fuel Systems{1250,1251,1252,1253,1254,1100}
1985/03/25
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Fuel Injection Lines Groups Use A Different Fuel Injection Nozzle Assembly{1254}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/05/17
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/11/15
Publications Available For Off Highway Truck Retrofits{1290,1631,1900,3100,3150}
1994/02/14
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
New Design of the Injector Provides Improved Durability {1290, 1714}
2006/03/20
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Calibration Fluid for Fuel Nozzle Test Equipment Is Available {1252, 1254}
2008/12/01
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Machines {1250, 1251, 1290, 1713}
2013/10/17
Technical Information Bulletin
Air Fuel Ratio Control (AFRC) Adjustment To Help Reduce Excessive Black Smoke During Acceleration
Air Fuel Ratio Control (AFRC) Adjustment To Help Reduce Excessive Black Smoke During Acceleration
Disassembly and Assembly
Fuel Ratio Control
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Service Magazine
Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly{1278}
1981/01/19
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15
Improvements Made To Fuel Ratio Control {1278}
1982/11/29
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Installation Of 9G8187 Cold Start Relay{1289}
Installation Of 9G8187 Cold Start Relay{1289}
Service Letter-NACD
A Directional Shift Management System Needs To Be Installed On Certain 768C Tractors; 769C, 771C, 773B, And 775B Trucks; And OEM Power Modules
A Directional Shift Management System Needs To Be Installed On Certain 768C Tractors; 769C, 771C, 773B, And 775B Trucks; And OEM Power Modules
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Service Letter-China
A Directional Shift Management System Needs To Be Installed On Certain 768C Tractors; 769C, 771C, 773B, And 775B Trucks; And OEM Power Modules
A Directional Shift Management System Needs To Be Installed On Certain 768C Tractors; 769C, 771C, 773B, And 775B Trucks; And OEM Power Modules
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Voltage Protector
769, 773B, & 777 TRUCKS OPERATOR'S STATION
Governor Shut-Off Relay
769, 773B, & 777 TRUCKS OPERATOR'S STATION
Governor Shut-Off Switch, Engine Start-Stop Circuit Breaker
769, 773B, & 777 TRUCKS OPERATOR'S STATION
Governor Control Valve
769C TRUCK VEHICLE SYSTEMS
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems{1252,1254}
1980/02/25
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly{1278}
1981/01/19
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15
New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22
New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Fuel Rack Slots Have Improved Wear Resistance{1257}
1982/05/10
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Fuel Nozzle Adapters Used{1106}
1983/05/09
New Specification For Clearance Between Fuel Rack Slot And Cross Link{1257}
1983/05/16
New Fuel Priming Pump Used{1258}
1983/06/20
Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage{1265}
1983/07/04
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position{1106,1252}
1984/02/27
New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage{1253}
1984/05/14
Changes To Fuel Systems{1250,1251,1252,1253,1254,1100}
1985/03/25
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Cylinder Heads And Fuel Nozzle Adapters Used{1101,1106}
1985/07/01
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Fuel Transfer Pump Shaft With Chromium Plate{1256}
1977/10/10
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Fuel Priming Pump Used{1258}
1987/04/20
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Fuel Shutoff Solenoid Assembly Used{1259}
1988/10/31
Ether Starting Aid Groups Are Now Available{1456}
1979/01/22
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Stronger Output Shaft Now Used In 2N3909 Tachometer Drive Adapter{7462}
1979/04/02
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
5P7437 Adapter (Part Of 8T5301 Diesel Timing Adapter Group) Must Be Modified To Work On Current Fuel Lines.{0782}
1992/02/03
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Directional Shift Management Used To Improve Drive Line Life{1265}
1993/07/12
New Speed Sensors Available{1907,1900,7462}
1993/08/30
Publications Available For Off Highway Truck Retrofits{1290,1631,1900,3100,3150}
1994/02/14
Brighter Dash Lamps Used For Better Visibility{7481}
1994/06/13
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
Procedure To Increase Fuel Transfer Pump Pressure {1256}
1995/04/10
Lubricity Limit Added To Preferred Distillate Fuel Recommendation {1280,7568}
1997/08/18
New Guideline For Product Information, SEBF8340, &quot; Fuel Systems Troubleshooting Guide For 3204, 3300, And 3400 Engines With New Scroll Fuel Systems (NSFS)&quot; Available {0374,1250}
1998/06/22
Use 154-8100 Fuel System Arrangement And 154-8101 Fuel System Group To Measure Engine Fuel Flow{1250,0782}
1999/06/01
Special Instruction
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Injection Nozzle And Adapter
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Nozzle And Adapter<BR> (For Later Engines)
3408 VEHICULAR ENGINE
Tool Operating Manual
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Disassembly and Assembly
Fuel Injection Nozzles &amp; Adapters
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Nozzles (Direct Injection)
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Fuel Injection Nozzle Adapters (Direct Injection-Earlier)
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Fuel Injection Nozzle Adapters
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Fuel Injection Nozzles And Adapters
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Fuel Injection Valves (Precombustion)
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Injection Nozzles (Direct Injection - Later)
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Injection Nozzle Adapters (Direct Injection-Earlier)
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Injection Nozzle Adapters (Later)
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Injection Nozzles And Adapters (Later)
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Fuel Nozzle Adapters Used{1106}
1983/05/09
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position{1106,1252}
1984/02/27
Changes To Fuel Systems{1250,1251,1252,1253,1254,1100}
1985/03/25
New Cylinder Heads And Fuel Nozzle Adapters Used{1101,1106}
1985/07/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New Fuel Injection Lines Groups Use A Different Fuel Injection Nozzle Assembly{1254}
1979/03/12
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Publications Available For Off Highway Truck Retrofits{1290,1631,1900,3100,3150}
1994/02/14
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Special Instruction
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Magazine
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
1590835, 1388754, 1313098, 1590838, 1388755, 1313099, 0r9420, And 0r8624 Injectors Need To Be Inspected For Special Instructions
1590835, 1388754, 1313098, 1590838, 1388755, 1313099, 0r9420, And 0r8624 Injectors Need To Be Inspected For Special Instructions
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Injection
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Nozzle And Adapter
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Governor
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump Housing
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Governor Drive And Oil Pump
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Governor And Fuel Pump Drive
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump Drive
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Valve Mechanism Covers
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Valve Rocker Arms, Lifters And Bridges
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection
3408 VEHICULAR ENGINE
Fuel Injection Pump Housing
3408 VEHICULAR ENGINE
Automatic Timing Advance Unit
3408 VEHICULAR ENGINE
Injection Actuation Pressure Control Valve
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Wiring
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector
3408E and 3412E Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Letter-China
1590835, 1388754, 1313098, 1590838, 1388755, 1313099, 0r9420, And 0r8624 Injectors Need To Be Inspected For Special Instructions
1590835, 1388754, 1313098, 1590838, 1388755, 1313099, 0r9420, And 0r8624 Injectors Need To Be Inspected For Special Instructions
Service Letter-Asia
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Service Letter-APD
1590835, 1388754, 1313098, 1590838, 1388755, 1313099, 0r9420, And 0r8624 Injectors Need To Be Inspected For Special Instructions
1590835, 1388754, 1313098, 1590838, 1388755, 1313099, 0r9420, And 0r8624 Injectors Need To Be Inspected For Special Instructions
Testing and Adjusting
Fuel Injector Oil Leakage - Check
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Fuel Injection Nozzles &amp; Adapters
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pumps
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump Housing &amp; Governor
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump Housing
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Nozzles (Direct Injection)
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Fuel Transfer Pump
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Automatic Timing Advance
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Fuel Injection Pump Housing And Governor
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Governor
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Governor Shutoff Solenoid
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Governor Control Cylinder
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Fuel Injection Valves (Precombustion)
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Injection Nozzles (Direct Injection - Later)
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Injection Nozzles And Adapters (Later)
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Transfer Pump
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Injection Pumps
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Automatic Timing Advance
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Injection Pump Housing And Governor
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Injection Pump Housing
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Injection Actuation Pressure Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems{1252,1254}
1980/02/25
Modification Of 5P1768 Pointer Assembly Necessary For Use On Some Fuel Injection Pump Housings{1253,0653}
1980/03/31
Special Cup Plugs For Use In Oversize (Larger Than Standard Size) Bores In Valve Rocker Arm Shafts{1102}
1980/09/15
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Larger Plug Used In The Ends Of The Rocker Arm Shaft Assembly{1102}
1980/12/01
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15
New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Fuel Nozzle Adapters Used{1106}
1983/05/09
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Procedure To Remove Sharp Edges From Fuel Racks {1257,1253}
1984/02/06
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position{1106,1252}
1984/02/27
New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage{1253}
1984/05/14
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Changes To Fuel Systems{1250,1251,1252,1253,1254,1100}
1985/03/25
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
New Cylinder Heads And Fuel Nozzle Adapters Used{1101,1106}
1985/07/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
New 5P4185 Fuel Pump Timing Pin To Be Used Only On 3408 And 3412 Engines{0650,1257}
1977/05/16
Fuel Transfer Pump Shaft With Chromium Plate{1256}
1977/10/10
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
A Gasket Group Is Available To Give Improved Sealing For The Oil Supply To The Rocker Arms On Early Engines{1101,1102,1221}
1978/04/03
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Ether Starting Aid Groups Are Now Available{1456}
1979/01/22
New Fuel Injection Lines Groups Use A Different Fuel Injection Nozzle Assembly{1254}
1979/03/12
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/05/17
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/11/15
Publications Available For Off Highway Truck Retrofits{1290,1631,1900,3100,3150}
1994/02/14
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Improved Fuel Pump Bonnet Seal Has Better Heat Resistance {1251}
1994/09/12
Procedure To Increase Fuel Transfer Pump Pressure {1256}
1995/04/10
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/25
New Design of the Injector Provides Improved Durability {1290, 1714}
2006/03/20
Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1254}
2006/01/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Improved Manufacturing Processes Are Used for Remanufactured Fuel Injector Nozzles That Are Used in Certain Machine Engines {1251, 1290}
2012/07/09
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Machines {1250, 1251, 1290, 1713}
2013/10/17
Truck Engine News
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/08
Engine News
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/08
Special Instruction
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Specifications
Fuel Transfer Pump Drive
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Primary Fuel Filter And Fuel Filter Base
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Tool Operating Manual
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting
Fuel System - Prime
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Fuel Priming Pump
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Fuel Priming Pump
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Service Magazine
New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22
New Fuel Priming Pump Used{1258}
1983/06/20
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Fuel Transfer Pump Shaft With Chromium Plate{1256}
1977/10/10
Improved Fuel Priming Pump Used{1258}
1987/04/20
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Improved 1R-0712 Fuel Filter Provides Improved Sealing{1261}
1994/03/28
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
Procedure To Increase Fuel Transfer Pump Pressure {1256}
1995/04/10
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
2004/03/29
Replacement of the Priming Pump {1258, 1263}
2007/11/05
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/04
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Specifications
Governor
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump Housing
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Governor Drive And Oil Pump
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Governor And Fuel Pump Drive
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump Drive
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Governor Drive And Oil Pump
3408 VEHICULAR ENGINE
Fuel Transfer Pump Drive
3408 VEHICULAR ENGINE
Fuel Transfer Pump
3408 VEHICULAR ENGINE
Fuel Transfer Pump
3408E and 3412E Engines for Caterpillar Built Machines
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Reuse And Salvage Guidelines
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Information Release Memo
REMANUFACTURED FUEL TRANSFER PUMPS FOR 3408, 3412, 3408B, 3412B, 3408C AND 3412C INDUSTRIAL, GENSET, MARINE AND MACHINE APPLICATIONS
REMANUFACTURED FUEL TRANSFER PUMPS FOR 3408, 3412, 3408B, 3412B, 3408C AND 3412C INDUSTRIAL, GENSET, MARINE AND MACHINE APPLICATIONS
Testing and Adjusting
Fuel System Pressure - Test
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Fuel Transfer Pump
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Automatic Timing Advance
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Fuel Injection Pump Housing And Governor
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Governor
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Governor Shutoff Solenoid
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Governor Control Cylinder
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Fuel Transfer Pump
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Injection Pumps
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Injection Pump Housing And Governor
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Transfer Pump - Install
3408E and 3412E Engines for Caterpillar Built Machines
Fuel Transfer Pump - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Modification Of 5P1768 Pointer Assembly Necessary For Use On Some Fuel Injection Pump Housings{1253,0653}
1980/03/31
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22
New Fuel Priming Pump Used{1258}
1983/06/20
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Procedure To Remove Sharp Edges From Fuel Racks {1257,1253}
1984/02/06
New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage{1253}
1984/05/14
Changes To Fuel Systems{1250,1251,1252,1253,1254,1100}
1985/03/25
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
New 5P4185 Fuel Pump Timing Pin To Be Used Only On 3408 And 3412 Engines{0650,1257}
1977/05/16
Fuel Transfer Pump Shaft With Chromium Plate{1256}
1977/10/10
Improved Fuel Priming Pump Used{1258}
1987/04/20
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
Improved Fuel Pump Bonnet Seal Has Better Heat Resistance {1251}
1994/09/12
Procedure To Increase Fuel Transfer Pump Pressure {1256}
1995/04/10
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/25
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of New Hose Assembly for Unit Injector Hydraulic Pump{1274, 1307, 1714}
Installation of New Hose Assembly for Unit Injector Hydraulic Pump{1274, 1307, 1714}
Specifications
Injection Actuation Pressure Control Valve
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump
3408E and 3412E Engines for Caterpillar Built Machines
Hydraulic Pump Drive
3408E and 3412E Engines for Caterpillar Built Machines
Injection Actuation Pressure Sensor
3408E and 3412E Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Disassembly and Assembly
Injection Actuation Pressure Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump Drive - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump Drive - Install
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump Drive - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump Drive - Assemble
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump - Install
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump - Assemble
3408E and 3412E Engines for Caterpillar Built Machines
Injection Actuation Pressure Control Valve - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Injection Actuation Pressure Control Valve - Install
3408E and 3412E Engines for Caterpillar Built Machines
Injection Actuation Pressure Control Valve - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines
Injection Actuation Pressure Control Valve - Assemble
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump - Install
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump Drive - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump Drive - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Troubleshooting the Injection Actuation Pressure on Unit Injector Hydraulic Pumps {1714}
2006/11/13
Fuel Rack Slots Have Improved Wear Resistance{1257}
1982/05/10
Procedure To Remove Sharp Edges From Fuel Racks {1257,1253}
1984/02/06
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30
Special Instruction
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Service Magazine
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2007/07/30
Replacement of the Priming Pump {1258, 1263}
2007/12/24
Special Instruction
Installation Of 2N2384 And 2N2385 Solenoids{1259, 1400}
Installation Of 2N2384 And 2N2385 Solenoids{1259, 1400}
Service Magazine
Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage{1265}
1983/07/04
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
New Fuel Shutoff Solenoid Assembly Used{1259}
1988/10/31
Service Letter-NACD
A Directional Shift Management System Needs To Be Installed On Certain 768C Tractors; 769C, 771C, 773B, And 775B Trucks; And OEM Power Modules
A Directional Shift Management System Needs To Be Installed On Certain 768C Tractors; 769C, 771C, 773B, And 775B Trucks; And OEM Power Modules
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-China
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Governor Control Valve
768C & 769C TRACTOR & 769C TRUCK VEHICLE SYSTEMS
Governor Control Cylinder
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Governor Control Cylinder
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Governor Control Valve
769C TRUCK VEHICLE SYSTEMS
Service Magazine
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Directional Shift Management Used To Improve Drive Line Life{1265}
1993/07/12
Directional Shift Management Used To Improve Drive Line Life{1265}
1993/09/27
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23

Truck sale:

Caterpillar 769C
 
Caterpillar 769C
- Off Highway Trucks
MACALLISTER MACHINERY CO., INC
Caterpillar 769C
 
Caterpillar 769C
- Off Highway Trucks
HOLT CAT
Caterpillar 769C
 
Caterpillar 769C
- Off Highway Trucks
HOLT CAT
Caterpillar 769C
 
Caterpillar 769C
- Off Highway Trucks
HOLT CAT
Caterpillar 769C, Dumper - Knickgelenk, Bau-Und Bergbauausrüstung
68.091 
Caterpillar 769C, Dumper - Knickgelenk, Bau-Und Bergbauausrüstung
- Articulated Dump Trucks (ADTs)
FINNING CANADA
Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.