AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W2922 GOVERNOR GP-PART 1 OF 2 PART OF 2W8961 & 1011665 GOVERNOR, FUEL INJECTION, FUEL TRANSFER PUMPS 769C


FUEL SYSTEM
GOVERNOR GP
PUMP GP-FUEL INJECTION
GOVERNOR GP
PUMP GP-FUEL INJECTION

TRUCK 769C TRUCK 01X
 769C TRUCK 01X05474-06599 (MACHINE) POWERED BY 3408 ENGINE SEBP1945 769C 01X   (1978)

FUEL SYSTEM

GOVERNOR GP
DRIVE GP-GOVERNOR & FUEL PUMP
6N-3195 DRIVE GP-GOVERNOR & FUEL PUMP
PUMP GP-GOV, FUEL INJ & TFR
2W-8961 PUMP GP-GOV, FUEL INJ & TFR
PUMP GP-GOV, FUEL INJ & TFR
101-1665 PUMP GP-GOV, FUEL INJ & TFR
GOVERNOR GP
4W-2922 GOVERNOR GP
GOVERNOR GP
4W-2922 GOVERNOR GP
PLATE GP-GOVERNOR ADAPTER
4W-2921 PLATE GP-GOVERNOR ADAPTER
PISTON GP-GOVERNOR SERVO
6N-5314 PISTON GP-GOVERNOR SERVO
 

#SEBP19450130
 

4W-2922: GOVERNOR GP

4W2922 GOVERNOR GP-PART 1 OF 2
PART OF 2W8961 & 1011665 GOVERNOR, FUEL INJECTION, FUEL TRANSFER PUMPS
c549318 SEBP1945
4W2922 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-3363 [1] HOUSING AS-GOVERNOR  
2. 9S-8001 [1] PLUG-O-RING  
  4J-7533 [1] SEAL-O-RING  
3. 8M-8403 [1] GUIDE-SPRING  
4. 7E-8940 C [1] BEARING-SLEEVE  
5. 7E-8941 C [1] BEARING-SLEEVE  
6. 8T-2604 [2] SEAL-LIP TYPE  
7. 8L-4308 [1] BOLT  
8. 9M-1974 C [5] WASHER-HARD  
9. 2B-2695 [1] BOLT  
10. 2P-8707 [1] PLATE AS-GOVERNOR  
11. 8L-4175 [1] DOWEL  
12. 0S-1594 [1] BOLT  
13. 1D-4540 [3] BOLT  
14. 1N-4656 [1] SHAFT-GOVERNOR CONTROL  
15. 9N-1917 [1] COVER AS-GOVERNOR  
16. 3P-0009 [1] INSULATOR-STUD  
17. 9N-1916 [1] LEVER-SHUT-OFF  
18. 5M-6228 [1] BEARING-NEEDLE  
19. 2A-0762 [2] BOLT  
20. 9N-2165 [1] LEVER-SOLENOID  
21. 1S-7336 [2] LOCK-BOLT  
22. 0S-1614 [2] BOLT  
23. 5P-0796 [2] SEAL-LIP TYPE  
24. 4N-0951 [1] SHAFT-SHUT-OFF  
25. 1S-7984 [1] BEARING-SLEEVE  
26. 1K-4703 [1] WASHER  
27. 7N-7325 [1] SCREW-ADJUSTING (LOW-IDLE)  
28. 2J-0157 [2] SEAL-O-RING  
29. 8H-9204 [2] WASHER-FELT  
30. 3S-1494 [1] SCREW-ADJUSTING (HIGH-IDLE)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19450131
 

4W-2922: GOVERNOR GP

4W2922 GOVERNOR GP-PART 2 OF 2
4W2921-PAGE 78
PART OF 2W8961 & 1011665 GOVERNOR, FUEL INJECTION, FUEL TRANSFER PUMPS
c734441 SEBP1945
4W2922 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
31. 5L-8992 [1] COVER-ADJUSTMENT  
32. 5P-6945 [1] BOLT  
  4B-9747 [1] WASHER  
33. 8L-4155 [1] SETSCREW  
  9S-8748 [1] NUT-FULL  
34. 9M-4704 [1] BOLT  
35. 8L-4154 [1] COLLAR-LOAD STOP  
36. 7C-5279 C [1] COVER  
37. 4B-9365 C [2] BOLT  
  1B-4330 C [2] NUT  
  5P-0537 [4] WASHER  
38. 8L-3873 C [2] GASKET  
39. 2P-8669 [1] GASKET  
40. 2W-1491 [1] LEVER-CONTROL  
41. 9M-9788 [1] PLUNGER-STOP  
42. 7M-7316 [1] SPRING  
43. 5H-1351 [1] PIN-SPRING  
44. 2P-8679 [1] STRAINER AS  
45. 2P-8697 [1] GASKET  
46. 6N-3504 [1] SEAT-GOVERNOR SPRING  
47. 4N-1870 [1] GASKET-HOUSING  
48. 9S-8008 [1] PLUG-O-RING  
  3D-2824 [1] SEAL-O-RING  
49. 9S-4182 [1] PLUG  
  3J-7354 [1] SEAL-O-RING  
   
50. 4W-2921 Y [1] PLATE GP-GOVERNOR ADAPTER  
51. 061-6708 [1] RING-RETAINING  
52. 6N-4158 [1] RING-GOVERNOR DRIVE  
53. 6N-4164 [1] SPRING  
54. 6N-4156 [1] RING-RETAINING  
55. 8H-9181 [1] SPRING-BUMPER  
56. 4W-7654 [1] BOLT  
57. 6N-8793 [1] SPRING  
58. 5L-8991 [1] GASKET-COVER  
59. 1B-9575 [1] BOLT  
60. 6N-4159 [1] DRIVE AS-GOVERNOR  
  2N-5626 [1] YOKE  
61. 6D-9953 [2] PIN-SPRING  
62. 6N-4460 [5] SPRING-LEAF  
63. 6N-4161 [1] COLLAR-GOVERNOR DRIVE  
  6N-4160 [1] PIN  
64. 3L-5987 CB [1] COVER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19450132
 

4W-2921: PLATE GP-GOVERNOR ADAPTER

4W2921 PLATE GP-GOVERNOR ADAPTER
6N5314-PAGE 79
PART OF 4W2922 GOVERNOR
c642496 SEBP1945
4W2921 PLATE GP-GOVERNOR ADAPTER Parts scheme
  For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-8739 [1] BOLT-LOAD STOP  
2. 1W-4641 [1] RISER-GOVERNOR  
3. 1W-4640 [1] SEAT-SPRING  
4. 2P-8630 [1] DOWEL  
5. 7M-7193 [1] RACE-THRUST BEARING  
6. 7M-7219 [1] BEARING-THRUST  
7. 3K-0810 [1] LOCKRING  
8. 6N-7818 [1] LOCKRING  
9. 5P-5601 [2] SEAL-O-RING  
10. 9S-8008 [1] PLUG-O-RING  
  3D-2824 [1] SEAL-O-RING (23.47MM ID)  
11. 4W-2169 [1] PLATE AS-ADAPTER  
  6N-3175 [1] DOWEL  
12. 4N-0898 [1] DOWEL-HOLLOW  
13. 9M-2089 [1] DOWEL  
14. 7N-0579 [1] BEARING-SLEEVE  
15. 4N-3702 [1] WASHER  
  8N-6579 [1] SPRING-GOVERNOR  
16. 4W-7653 [1] BOLT-GROUND BODY  
17. 6N-5314 Y [1] PISTON GP-GOVERNOR SERVO  
18. 9N-3323 [1] BRACKET AS-CONTROL  
  2S-7316 C [1] DOWEL  
19. 7W-7129 C [1] LEVER-RACK CONTROL  
20. 7N-2351 [1] PIN-CONTROL  
21. 034-4160 [2] BOLT-LOCKING (5/16-18X1.0IN)  
22. 8M-6393 [1] RING-RETAINING  
   
23. 6N-4157 [1] GEAR AS (42 TEETH)  
  7L-4993 [2] DOWEL  
24. 9L-6509 [1] WEIGHT AS-GOVERNOR  
25. 6H-9691 [1] SEAL-O-RING (2.9MM ID)  
26. 6N-8195 [1] RACE-THRUST  
27. 7N-7783 [1] SLEEVE-VALVE PILOT  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19450133
 

7W-0561: PUMP GP-FUEL INJECTION

7W0561 PUMP GP-FUEL INJECTION
PART OF 4W6012 & 1011666 PUMPS-FUEL INJECTION
c353004 SEBP1945
7W0561 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-9171 [1] BONNET-VALVE  
2. 8N-1415 [1] SPRING-CHECK  
3. 1W-6987 [1] VALVE AS-CHECK  
4. 7W-1927 [1] RING-RETAINER  
5. 7W-0182 [1] PLUNGER & BARREL AS  
6. 7C-5278 C [1] BOLT-GEAR  
7. 7N-1066 C [1] WASHER-RETAINER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19450134
 

6N-5314: PISTON GP-GOVERNOR SERVO

6N5314 PISTON GP-GOVERNOR SERVO
PART OF 4W2921 PLATE-GOVERNOR ADAPTER
c510121 SEBP1945
6N5314 PISTON GP-GOVERNOR SERVO Parts scheme
  For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1807 [1] CYLINDER-SERVO  
2. 5P-9757 C [1] SEAL-O-RING  
3. 8N-6983 [1] SLEEVE  
4. 8N-6978 [1] PISTON & VALVE AS  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19450135
 

4W-6012: PUMP GP-FUEL INJECTION

4W6012 PUMP GP-FUEL INJECTION-PART 1 OF 2
ENGINE S/N 48W30900-35194
7N4574-PAGE 82, 7W0561-PAGE 79
PART OF 2W8961 GOVERNOR, FUEL INJECTION, FUEL TRANSFER PUMP
c617786 SEBP1945
4W6012 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-2697 B [8] SPACER (4.32MM THK)  
  2M-4208 B [8] SPACER (4.42MM THK)  
  2M-4209 B [8] SPACER (4.52MM THK)  
  2M-4210 B [8] SPACER (4.62MM THK)  
  2M-4211 B [8] SPACER (4.72MM THK)  
  2M-4212 B [8] SPACER (4.83MM THK)  
  5M-2691 B [8] SPACER (4.93MM THK)  
  5S-7189 B [8] SPACER (5.03MM THK)  
2. 8N-6981 [8] LIFTER AS  
3. 9S-4191 [1] PLUG-O-RING (9/16-18 THD)  
  3J-1907 [1] SEAL-O-RING (11.89MM ID)  
4. 7N-4574 Y [1] HOUSING AS-PUMP  
5. 8H-9204 [8] WASHER-FELT  
6. 7E-5085 [8] BUSHING-TERMINAL  
7. 9S-8008 [2] PLUG-O-RING (1 1/16-12 THD)  
  3D-2824 [2] SEAL-O-RING (23.47MM ID)  
8. 1T-0284 [1] BOLT-SOCKET HEAD  
9. 7N-2694 [1] BRACKET AS-CONTROL  
10. 6N-6955 [1] PIN  
11. 7N-2693 [1] SPRING-TORSION  
12. 4N-1572 [1] LINK-RACK  
13. 4N-0900 [1] RACK-REGULATOR-RH  
  4N-0901 [1] RACK-REGULATOR-LH  
14. 114-8718 [8] SEAL-O-RING (26.64MM ID)  
15. 7W-0561 Y [8] PUMP GP-FUEL INJECTION  
16. 4W-8140 C [1] CAMSHAFT-FUEL PUMP  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19450136
 

4W-6012: PUMP GP-FUEL INJECTION

4W6012 PUMP GP-FUEL INJECTION-PART 2 OF 2
ENGINE S/N 48W30900-35194
PART OF 2W8961 GOVERNOR, FUEL INJECTION, FUEL TRANSFER PUMP
c733410 SEBP1945
4W6012 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
17. 4N-0824 [1] VALVE AS-BYPASS  
  7L-8696 [1] SPRING-BYPASS  
18. 3K-0360 [1] SEAL-O-RING  
19. 8N-0561 [1] GEAR (IDLER-9 TEETH)  
20. 6N-7695 [1] COVER-OIL PUMP  
  6L-5897 [2] BOLT  
21. 6N-4165 [1] PINION AS-GOVERNOR DRIVE  
22. 6N-4090 [1] DOWEL  
23. 8N-0560 [1] GEAR (DRIVE-11 TEETH)  
24. 0S-1618 [3] BOLT  
25. 5M-6214 [1] PLUG-PIPE  
26. 5F-9144 [1] SEAL-O-RING  
27. 4N-0905 [1] GEAR-BEVEL (42 TEETH)  
28. 4N-0776 [1] RETAINER  
 

#SEBP19450137
 

101-1666: PUMP GP-FUEL INJECTION

1011666 PUMP GP-FUEL INJECTION-PART 1 OF 2
ENGINE S/N 48W35195-UP
7N4574-PAGE 82, 7W0561-PAGE 79
PART OF 1011665 GOVERNOR, FUEL INJECTION, FUEL TRANSFER PUMP
c647464 SEBP1945
1011666 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-2697 B [8] SPACER (4.32MM THK)  
  2M-4208 B [8] SPACER (4.42MM THK)  
  2M-4209 B [8] SPACER (4.52MM THK)  
  2M-4210 B [8] SPACER (4.62MM THK)  
  2M-4211 B [8] SPACER (4.72MM THK)  
  2M-4212 B [8] SPACER (4.83MM THK)  
  5M-2691 B [8] SPACER (4.93MM THK)  
  5S-7189 B [8] SPACER (5.03MM THK)  
2. 8N-6981 [8] LIFTER AS  
3. 9S-4191 [1] PLUG-O-RING  
  3J-1907 [1] SEAL-O-RING  
4. 7N-4574 Y [1] HOUSING AS-FUEL PUMP  
5. 8H-9204 [8] WASHER-FELT  
6. 7E-5085 [8] BUSHING-TERMINAL  
7. 9S-8008 [2] PLUG-O-RING  
  3D-2824 [2] SEAL-O-RING  
8. 1T-0284 [1] BOLT-SOCKET HEAD  
9. 7N-2694 [1] BRACKET AS-CONTROL  
10. 6N-6955 [1] PIN  
11. 7N-2693 [1] SPRING-TORSION  
12. 4N-1572 [1] LINK-RACK  
13. 4N-0900 [1] RACK-REGULATOR-RH  
  4N-0901 [1] RACK-REGULATOR-LH  
14. 114-8718 [8] SEAL-O-RING  
15. 7W-0561 Y [8] PUMP GP-FUEL INJECTION  
16. 101-1667 [1] CAMSHAFT-FUEL PUMP  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP19450138
 

101-1666: PUMP GP-FUEL INJECTION

1011666 PUMP GP-FUEL INJECTION-PART 2 OF 2
ENGINE S/N 48W35195-UP
PART OF 1011665 GOVERNOR, FUEL INJECTION, FUEL TRANSFER PUMP
c736384 SEBP1945
1011666 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
17. 4N-0824 [1] VALVE AS-BYPASS  
  7L-8696 [1] SPRING-BYPASS  
18. 3K-0360 [1] SEAL-O-RING  
19. 8N-0561 [1] GEAR (IDLER-9 TEETH)  
20. 6N-7695 [1] COVER-OIL PUMP  
  6L-5897 [2] BOLT  
21. 6N-4165 [1] PINION AS-GOVERNOR DRIVE  
22. 6N-4090 [1] DOWEL  
23. 8N-0560 [1] GEAR (DRIVE-11 TEETH)  
24. 0S-1618 [3] BOLT  
25. 5M-6214 [1] PLUG-PIPE  
26. 5F-9144 [1] SEAL-O-RING  
27. 4N-0905 [1] GEAR-BEVEL (42 TEETH)  
28. 4N-0776 [1] RETAINER  
 

#SEBP19450139
 

7N-4574: HOUSING AS-FUEL PUMP

7N4574 HOUSING AS-PUMP
PART OF 4W6012 & 1011666 PUMPS-FUEL INJECTION
c301909 SEBP1945
7N4574 HOUSING AS-FUEL PUMP Parts scheme
  For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7266 [1] SHAFT-PUMP IDLER  
2. 7N-0242 [2] BEARING-SLEEVE  
3. 5B-9318 [1] BALL  
4. 4N-0775 [2] DOWEL-HOLLOW  
5. 8L-6565 [1] PIN-SPRING  
6. 9S-4160 [2] BEARING-SLEEVE  
7. 4M-1474 [4] PIN-LIFTER GUIDE  
8. 9L-9766 [2] PIN-PLUNGER LIFT  
9. 6N-8441 [2] BEARING-SLEEVE  
10. 4N-0899 [1] DOWEL-HOLLOW  
11. 1P-0232 [8] BALL  
  1P-0234 [8] DOWEL  
12. 4N-0952 C [1] PLUG-CUP  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 9G8187 Cold Start Relay{1289}
Installation Of 9G8187 Cold Start Relay{1289}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Governor
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump Housing
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Governor Drive And Oil Pump
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Governor And Fuel Pump Drive
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump Drive
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Governors
3408 VEHICULAR ENGINE
Governor Drive And Oil Pump
3408 VEHICULAR ENGINE
Governor Control Group
3408 VEHICULAR ENGINE
Disassembly and Assembly
Governor Control Valve
768C & 769C TRACTOR & 769C TRUCK VEHICLE SYSTEMS
Fuel Injection Pump Housing & Governor
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump Housing
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Governor
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Governor Shutoff Solenoid
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Governor Control Cylinder
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Automatic Timing Advance
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Fuel Injection Pump Housing And Governor
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Governor
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Governor Shutoff Solenoid
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Governor Control Cylinder
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Voltage Protector
769, 773B, & 777 TRUCKS OPERATOR'S STATION
Governor Shut-Off Relay
769, 773B, & 777 TRUCKS OPERATOR'S STATION
Governor Shut-Off Switch, Engine Start-Stop Circuit Breaker
769, 773B, & 777 TRUCKS OPERATOR'S STATION
Fuel Transfer Pump
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Injection Pumps
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Injection Pump Housing And Governor
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Governor
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Governor Shutoff Solenoid
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Governor Control Cylinder
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Transmission Governor And Drive
768C TRACTOR & 769C TRUCK POWER TRAIN DISASSEMBLY & ASSEMBLY
Transmission Governor
768C TRACTOR & 769C TRUCK POWER TRAIN DISASSEMBLY & ASSEMBLY
Governor Air Reservoir
769C TRUCK VEHICLE SYSTEMS
Governor Air Reservoir Check Valve
769C TRUCK VEHICLE SYSTEMS
Governor Control Valve
769C TRUCK VEHICLE SYSTEMS
Service Magazine
Modification Of 5P1768 Pointer Assembly Necessary For Use On Some Fuel Injection Pump Housings{1253,0653}
1980/03/31
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22
Fuel Rack Slots Have Improved Wear Resistance{1257}
1982/05/10
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
New Specification For Clearance Between Fuel Rack Slot And Cross Link{1257}
1983/05/16
Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage{1265}
1983/07/04
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Procedure To Remove Sharp Edges From Fuel Racks {1257,1253}
1984/02/06
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Changes To Fuel Systems{1250,1251,1252,1253,1254,1100}
1985/03/25
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Fuel Transfer Pump Shaft With Chromium Plate{1256}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Correct Adjustment Of The Sensor Assembly For The Transmission Governor Is Important{7463,3151}
1979/10/01
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Improved Fuel Pump Bonnet Seal Has Better Heat Resistance {1251}
1994/09/12
Procedure To Increase Fuel Transfer Pump Pressure {1256}
1995/04/10
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/25

Caterpillar Parts SIS Catalog 769C :

TORQUE CONTROL GP
7W-0641 TORQUE CONTROL GP
FASTENER GP-FUEL INJ PUMP
9Y-3764 FASTENER GP-FUEL INJ PUMP
PUMP GP-FUEL TRANSFER
4W-5477 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
4N-1101 PUMP GP-FUEL TRANSFER
PUMP GP-GOV, FUEL INJ & TFR
101-1665 PUMP GP-GOV, FUEL INJ & TFR
PUMP GP-GOV, FUEL INJ & TFR
2W-8961 PUMP GP-GOV, FUEL INJ & TFR
PUMP GP-FUEL PRIMING
8N-7763 PUMP GP-FUEL PRIMING
DRIVE GP-GOVERNOR & FUEL PUMP
6N-3195 DRIVE GP-GOVERNOR & FUEL PUMP
GOVERNOR GP
4W-2922 GOVERNOR GP
PLATE GP-GOVERNOR ADAPTER
4W-2921 PLATE GP-GOVERNOR ADAPTER
PUMP GP-FUEL INJECTION
7W-0561 PUMP GP-FUEL INJECTION
PISTON GP-GOVERNOR SERVO
6N-5314 PISTON GP-GOVERNOR SERVO
PUMP GP-FUEL INJECTION
4W-6012 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-6012 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
101-1666 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
101-1666 PUMP GP-FUEL INJECTION

Truck sale:

Caterpillar 769C
 
Caterpillar 769C
- Off Highway Trucks
MACALLISTER MACHINERY CO., INC
Caterpillar 769C
 
Caterpillar 769C
- Off Highway Trucks
HOLT CAT
Caterpillar 769C
 
Caterpillar 769C
- Off Highway Trucks
HOLT CAT
Caterpillar 769C
 
Caterpillar 769C
- Off Highway Trucks
HOLT CAT
Caterpillar 769C, Dumper - Knickgelenk, Bau-Und Bergbauausrüstung
68.091 
Caterpillar 769C, Dumper - Knickgelenk, Bau-Und Bergbauausrüstung
- Articulated Dump Trucks (ADTs)
FINNING CANADA
Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.