AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

773B TRUCK 63W03296-04199 (MACHINE) POWERED BY 3412 ENGINE FRAME AND BODY Caterpillar SIS



TRUCK 773B TRUCK 63W
 773B TRUCK 63W03296-04199 (MACHINE) POWERED BY 3412 ENGINE SEBP1946 773B 63W   (1978)

Parts group 773B:

  For full view, you need register
FRAME AND BODY
BODY GP-TRUCK
BODY & CANOPY AS
8W-7290 BODY & CANOPY AS
8W7290 BODY & CANOPY AS
PART OF 8X9930 BODY & CANOPY
AN ATTACHMENT
BODY & CANOPY AS
8W-8727 BODY & CANOPY AS
8W8727 BODY & CANOPY AS-EXPORT
AN ATTACHMENT
8X-9930 BODY & CANOPY AS
8X9930 BODY & CANOPY AS
AN ATTACHMENT
8X-8935 BODY & CANOPY AS
8X8935 BODY & CANOPY AS
AN ATTACHMENT
BODY & CANOPY AS
8X-8930 BODY & CANOPY AS
8X8930 BODY & CANOPY AS
PART OF 8X8935 BODY & CANOPY AS
AN ATTACHMENT
LINER GP-BODY
8W-8182 LINER GP-BODY
8W8182 LINER GP-BODY
LIGHT
FOR USE WITH 8W7290 BODY & CANOPY-PAGE 249
AN ATTACHMENT
LINER GP-BODY
8W-8193 LINER GP-BODY
8W8193 LINER GP-BODY
HEAVY
FOR USE WITH 8W7290 BODY & CANOPY-PAGE 249 &
8W8727 BODY & CANOPY-EXPORT-PAGE 249.01
AN ATTACHMENT
MOUNTING GP-BODY
8X-2138 MOUNTING GP-BODY
8X2138 MOUNTING GP-BODY-PART 1 OF 2
S/N 63W3296-UP
8X-2138 MOUNTING GP-BODY
8X2138 MOUNTING GP-BODY-PART 2 OF 2
S/N 63W3296-UP
MOUNTING GP-BODY
8X-2138 MOUNTING GP-BODY
8X2138 MOUNTING GP-BODY-PART 1 OF 2
S/N 63W4200-UP
8X-2138 MOUNTING GP-BODY
8X2138 MOUNTING GP-BODY-PART 2 OF 2
S/N 63W4200-UP
COWLING GP
COWLING GP
8W-5764 COWLING GP
8W5764 COWLING GP
FENDER GP
FENDER GP
8W-8870 FENDER GP
8W8870 FENDER GP
S/N 63W3296-3732
FENDER GP
8X-9973 FENDER GP
8X9973 FENDER GP
S/N 63W3733-UP
FRAME GP
FRAME GP
8W-7237 FRAME GP
8W7237 FRAME GP
S/N 63W3296-3732
FRAME GP
8X-9968 FRAME GP
8X9968 FRAME GP
S/N 63W3733-UP
2A-6982 FRAME AS
2A6982 FRAME AS
FIELD INSTALLATION
GUARD GP
GUARD GP-REAR
105-8672 GUARD GP-REAR
1058672 GUARD GP-REAR
AN ATTACHMENT
GUARD GP-DRIVE SHAFT
9D-7810 GUARD GP-DRIVE SHAFT
9D7810 GUARD GP-DRIVE SHAFT
HANDHOLD GP
HANDHOLD GP
8W-9131 HANDHOLD GP
8W9131 HANDRAIL GP-PLATFORM-PART 1 OF 2
8W-9131 HANDHOLD GP
8W9131 HANDRAIL GP-PLATFORM-PART 2 OF 2
HOOD GP
HOOD GP-TRUCK
8W-7238 HOOD GP-TRUCK
8W7238 HOOD GP-TRUCK
S/N 63W3296-3994
HOOD GP-TRUCK
8W-7238 HOOD GP-TRUCK
8W7238 HOOD GP-TRUCK
S/N 63W3995-UP
LADDER GP
LADDER GP
8W-7239 LADDER GP
8W7239 LADDER GP
S/N 63W3296-3732
LADDER GP
8X-9974 LADDER GP
8X9974 LADDER GP
S/N 63W3733-UP
105-8678 LADDER AR
1058678 LADDER AR
FIELD INSTALLATION
WALKWAY GP
CATWALK GP
6G-0210 CATWALK GP
6G0210 CATWALK GP
S/N 63W3296-3732
CATWALK GP
7I-5530 CATWALK GP
7I5530 CATWALK GP
S/N 63W3733-4061
CATWALK GP
115-1614 CATWALK GP
1151614 CATWALK GP
S/N 63W4062-UP
SUSPENSION GP
SUSPENSION GP-FRONT
9D-7340 SUSPENSION GP-FRONT
9D7340 SUSPENSION GP-FRONT
TYPE 2
1163092-PAGE 244.02
SUSPENSION GP-FRONT
9D-7340 SUSPENSION GP-FRONT
9D7340 SUSPENSION GP-FRONT
TYPE 1
1U4777-PAGE 243
SUSPENSION GP-FRONT
1U-4777 SUSPENSION GP-FRONT
1U4777 SUSPENSION GP-FRONT
PART OF 9D7340 SUSPENSION-FRONT
SUSPENSION GP-REAR
9D-7350 SUSPENSION GP-REAR
9D7350 SUSPENSION GP-REAR
9T6082-PAGE 245
SUSPENSION GP-FRONT
116-3092 SUSPENSION GP-FRONT
1163092 SUSPENSION GP-FRONT
PART OF 9D7340 SUSPENSION-FRONT
SUSPENSION GP-REAR
9T-6082 SUSPENSION GP-REAR
9T6082 SUSPENSION GP-REAR
PART OF 9D7350 SUSPENSION-REAR
TREAD GP-NON-SKID
TREAD GP-NONSKID
8W-7475 TREAD GP-NONSKID
8W7475 TREAD GP-NON-SKID

Information:

(For parts list, see above)

Special Instruction
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Magazine
Maintenance Free Batteries{1401}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19
Special Instruction
Assembly and Installation Procedure for 8W0458 Body Assembly{7258}
Assembly and Installation Procedure for 8W0458 Body Assembly{7258}
Installation of 8W8419 Body Pivot Pin Assembly{7258}
Installation of 8W8419 Body Pivot Pin Assembly{7258}
Installation And Welding Procedure For 8W2725 Export Body Group{7528}
Installation And Welding Procedure For 8W2725 Export Body Group{7528}
Installation Of Body Front Support Pin Conversion{7051}
Installation Of Body Front Support Pin Conversion{7051}
Installation Of Truck Body Liner Groups{7258}
Installation Of Truck Body Liner Groups{7258}
Service Letter-NACD
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Product Support Program For Installing Rear Mud Flaps On The Bodies Of Certain 773B Trucks Equipped With 24 Inch Standard Wheels
Product Support Program For Installing Rear Mud Flaps On The Bodies Of Certain 773B Trucks Equipped With 24 Inch Standard Wheels
The Body Canopy Needs To Be Welded Completely Shut On Certain 773B Trucks
The Body Canopy Needs To Be Welded Completely Shut On Certain 773B Trucks
Service Letter-Australia
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
The Body Canopy Needs To Be Welded Completely Shut On Certain 773B Trucks
The Body Canopy Needs To Be Welded Completely Shut On Certain 773B Trucks
Service Letter-CFEL
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
The Body Canopy Needs To Be Welded Completely Shut On Certain 773B Trucks
The Body Canopy Needs To Be Welded Completely Shut On Certain 773B Trucks
Service Letter-CSARL
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Product Support Program For Installing Rear Mud Flaps On The Bodies Of Certain 773B Trucks Equipped With 24 Inch Standard Wheels
Product Support Program For Installing Rear Mud Flaps On The Bodies Of Certain 773B Trucks Equipped With 24 Inch Standard Wheels
The Body Canopy Needs To Be Welded Completely Shut On Certain 773B Trucks
The Body Canopy Needs To Be Welded Completely Shut On Certain 773B Trucks
Service Letter-Americas
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
The Body Canopy Needs To Be Welded Completely Shut On Certain 773B Trucks
The Body Canopy Needs To Be Welded Completely Shut On Certain 773B Trucks
Service Letter-Brazil
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Technical Information Bulletin
Drain Holes For OHT Bodies With Flat Floor
Drain Holes For OHT Bodies With Flat Floor
Tool Operating Manual
NEHS1120: Truck Body Lifting Pins {0599, 0629, 0632, 0757, 1122, 7006, 7006, 7258}
NEHS1120: Truck Body Lifting Pins {0599, 0629, 0632, 0757, 1122, 7006, 7006, 7258}
Service Letter-China
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
The Body Canopy Needs To Be Welded Completely Shut On Certain 773B Trucks
The Body Canopy Needs To Be Welded Completely Shut On Certain 773B Trucks
Service Letter-Asia
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
The Body Canopy Needs To Be Welded Completely Shut On Certain 773B Trucks
The Body Canopy Needs To Be Welded Completely Shut On Certain 773B Trucks
Service Letter-APD
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
The Body Canopy Needs To Be Welded Completely Shut On Certain 773B Trucks
The Body Canopy Needs To Be Welded Completely Shut On Certain 773B Trucks
Disassembly and Assembly
Body Retaining Pins
772B TRACTOR & 773B TRUCK POWER TRAIN
Body Support (FT1452)
772B TRACTOR & 773B TRUCK POWER TRAIN
Body Retaining Pins
772B TRACTOR & 773B TRUCK & 775B QUARRY TRUCK POWER TRAIN
Body Support (FT1452)
772B TRACTOR & 773B TRUCK & 775B QUARRY TRUCK POWER TRAIN
Body Retaining Pins
772B TRACTOR & 773B TRUCK MACHINE SYSTEMS
Body Support (FT1452)
772B TRACTOR & 773B TRUCK MACHINE SYSTEMS
BODY SUPPORT (FT1452)
772B TRACTOR & 773B TRUCK POWER TRAIN
Body Support (FT1452)
773B TRUCK VEHICLE SYSTEMS
Service Magazine
New Rock Ejectors Have Reinforcement Plates On Both Sides For Increased Strength; Ejector Mounting Bracket Changed On 777 Trucks{7157}
1980/01/21
Increased Clearance Between Hoist Cylinder Assembly And Rod{5102,7258}
1982/03/29
New Pins Used In Dump Body Support Assembly{7258}
1982/04/26
Dump Body Exhaust Port Can Be Moved {7258}
1982/11/29
Modifications Can Be Made To Improve Distribution Of Exhaust Through The Truck Dump Body Ribs{7258,1059,1061,1062}
1984/07/09
Exhaust Heating Of Additional Areas Of The Body{7258}
1984/09/17
Put Anti-Seize Compound On Body, Hoist, And Suspension Cylinder Pins{7201,7258}
1985/09/23
New Rock Ejectors {4203,7157}
1987/05/11
Improved Body Pivot Pin And Retention Mounting{7258}
1988/04/18
Rear Guard Group Released To Protect The Rear View Mirrors From Mud And Splatter{7252,7258}
1993/06/07
Body Mounting Plate Can Contact Front Service Brake Roto Chamber {4262,4266,7258}
1993/06/14
Rear Ribs Have Been Enlarged To Increase Support For Side Assembly{7250,7258}
1993/06/21
Body Mounting Plate Can Contact Front Service Brake Roto Chamber{4262,4266,7258}
1994/08/08
New Body Pivot Pins Now Used {7258}
1996/05/06
Guide Assemblies From Body Mounting Group Are No Longer Necessary On The Truck Rails To Reduce Stresses In The Frame {7258}
1996/10/14
Truck Body Pad Installation And Maintenance Is Very Important To Chassis Life{7258,7050}
1998/04/20
A New Body Retaining Pin Is Now Used {7258}
2006/01/02
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Proper Maintenance Improves Performance of Lock Cylinders {0645, 7273, 7308}
Proper Maintenance Improves Performance of Lock Cylinders {0645, 7273, 7308}
Special Instruction
Installation of Mud Guards{7250}
Installation of Mud Guards{7250}
Installation Of Fenders And Platform Support Assemblies{7252, 7253}
Installation Of Fenders And Platform Support Assemblies{7252, 7253}
Service Letter-NACD
A New Ladder Needs To Be Installed On Certain 773B And 775B Trucks
A New Ladder Needs To Be Installed On Certain 773B And 775B Trucks
Product Support Program For Installing Rear Mud Flaps On The Bodies Of Certain 773B Trucks Equipped With 24 Inch Standard Wheels
Product Support Program For Installing Rear Mud Flaps On The Bodies Of Certain 773B Trucks Equipped With 24 Inch Standard Wheels
Service Letter-Australia
A New Ladder Needs To Be Installed On Certain 773B And 775B Trucks
A New Ladder Needs To Be Installed On Certain 773B And 775B Trucks
Service Letter-CFEL
Service Letter-CSARL
Product Support Program For Installing Rear Mud Flaps On The Bodies Of Certain 773B Trucks Equipped With 24 Inch Standard Wheels
Product Support Program For Installing Rear Mud Flaps On The Bodies Of Certain 773B Trucks Equipped With 24 Inch Standard Wheels
Service Letter-Americas
A New Ladder Needs To Be Installed On Certain 773B And 775B Trucks
A New Ladder Needs To Be Installed On Certain 773B And 775B Trucks
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Longer, Wider Mud Guards Protect Cab And Platform Mirrors{7252}
1988/07/25
Rear Guard Group Released To Protect The Rear View Mirrors From Mud And Splatter{7252,7258}
1993/06/07
Field Repair 0f Cracked 2G-9774 Guard Assembly (Right Front Fender){7252}
1995/10/16
Special Instruction
Procedures for the Inspections, Repairs, and Component Replacements on the Frames and Support Assembly of Certain Off-Highway Trucks {3268, 7051}
Procedures for the Inspections, Repairs, and Component Replacements on the Frames and Support Assembly of Certain Off-Highway Trucks {3268, 7051}
Inspection and Repair of the Frame{7000, 7051, 7051, 7301}
Inspection and Repair of the Frame{7000, 7051, 7051, 7301}
Service Magazine
Improvements Give Added Strength To Main Frame{7051}
1981/06/29
External Reinforcements Can Be Added To Main Frames{7051}
1982/04/26
Regular Inspection Of Main Frames For Cracks{7051}
1982/05/17
New Service Parts Available To Repair Scraper Components{6201,6203,6204,6207,6212}
1986/02/17
Improved Hardware Now Used To Fasten Front Suspension Cylinder To Frame{7201}
1979/09/03
Gussets Added To Upper Front Suspension Strut Mounts To Help Prevent Frame Cracks{7051}
1991/03/25
Procedure To Repair Cracks In The Frame Rail {7051}
1993/10/11
Maintenance Interval For Steering Components, Hoist Cylinder Bearings And Rear Axle Housing "A" Frame Bearings Has Changed{7521,7551}
1994/07/25
Components Of The 3Z-3731 Lincoln Lubrication System Now Serviced Separately{7509}
1995/09/25
Cylinder Head For Front Suspension Cylinder Group Repositioned To Give Clearance Between Monitoring Sensor For Truck Payload And Truck Frame{7201,7494}
1997/10/13
Truck Body Pad Installation And Maintenance Is Very Important To Chassis Life{7258,7050}
1998/04/20
Weld Repair Procedure For Rear Upper Front Strut Mounting Plates {7050,7201}
1998/05/11
Install New Damper Assemblies During Assembly Of Radiator And Guard {1353,1381}
1980/09/22
Drive Shaft Restraint Added To Drive Shaft Guard Group{3253}
1984/10/01
Stronger Handrail With Support Bracket Used{7251,7256}
1987/11/23
Improvements To Handrail And To The Latch That Retains Battery Lid In Open Position{7251,7256}
1988/02/08
Improved Charging Valve For Accumulators And Suspension Cylinders{7107,7201}
1985/06/17
Disassembly and Assembly
Hoods
SUPPLEMENT FOR 772B TRACTOR, 773B TRUCK & 775B QUARRY TRUCK-
Hoods
3412 VEHICULAR ENGINE FOR 772B TRACTOR & 773B TRUCK DISASSEM
Service Magazine
New Exhaust Tubes And Support Used{1061,1067}
1982/05/10
Stronger Handrail With Support Bracket Used{7251,7256}
1987/11/23
Improvements To Handrail And To The Latch That Retains Battery Lid In Open Position{7251,7256}
1988/02/08
Service Letter-NACD
A New Ladder Needs To Be Installed On Certain 773B And 775B Trucks
A New Ladder Needs To Be Installed On Certain 773B And 775B Trucks
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
New Belted Ladders and Mounting Groups Are Now Used {7254}
2003/10/27
Special Instruction
Procedure to Install Auto-Lube Kit on Certain Off Highway Trucks {7540}
Procedure to Install Auto-Lube Kit on Certain Off Highway Trucks {7540}
Procedure to Upgrade Auto-Lube Kit on Certain Off Highway Trucks with Low Capacity Auto-Lubrication System {7540}
Procedure to Upgrade Auto-Lube Kit on Certain Off Highway Trucks with Low Capacity Auto-Lubrication System {7540}
Service Magazine
Individual Auto Lube Injectors Now Available{7540}
1992/07/13
Procedure To Set Automatic Lubricator{7500,7540}
1992/10/12
New Valve Lifter Assembly Provides Improved Lubrication Of Lifter Roller And Camshaft Lobes{1209,1210}
1994/06/20
Components Of The 3Z-3731 Lincoln Lubrication System Now Serviced Separately{7509}
1995/09/25
New Control Group (Timer) Is Available For Use With The Lincoln Lube System {7540}
1995/11/06
New Custom Product Support Literature Is Available For 773B And 773D Off-Highway Trucks Equipped With Cluster Lubrication System {0374,7540}
1997/06/02
Special Instruction
Installation Of Fenders And Platform Support Assemblies{7252, 7253}
Installation Of Fenders And Platform Support Assemblies{7252, 7253}
Installation Of Body Front Support Pin Conversion{7051}
Installation Of Body Front Support Pin Conversion{7051}
Service Letter-NACD
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Service Letter-Australia
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Service Letter-CFEL
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Service Letter-CSARL
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Service Letter-Americas
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Service Letter-Brazil
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Specifications
Front Wheel And Suspension Groups<BR> 6G-8241; 9D-7340 (Part Of 8W-7215 (772B) And 8W-7213 (773B) Chassis Arrangement)
772B TRACTOR AND 773B TRUCK STEERING SYSTEM
Introduction
772B TRACTOR & 773B TRUCK SUSPENSION CYLINDERS
Front Suspension Cylinders<BR> (9J2016 &amp; 1U4777)
772B TRACTOR & 773B TRUCK SUSPENSION CYLINDERS
Rear Suspension Cylinders<BR> (8J9332)
772B TRACTOR & 773B TRUCK SUSPENSION CYLINDERS
Service Letter-China
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Service Letter-Asia
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Service Letter-APD
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Product Support Program For Reinforcing The Horizontal Beam Body On Certain 769C, 773B, And 777B Trucks
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Disassembly and Assembly
Body Support (FT1452)
773B TRUCK VEHICLE SYSTEMS
Front Suspension Cylinders
773B TRUCK VEHICLE SYSTEMS
Rear Suspension Cylinders
773B TRUCK VEHICLE SYSTEMS
Service Magazine
New Rock Ejectors Have Reinforcement Plates On Both Sides For Increased Strength; Ejector Mounting Bracket Changed On 777 Trucks{7157}
1980/01/21
Change To Service Pressure (Operating-Loaded) Shown On Warning Plate For Rear Suspension Cylinders; Minimum Bursting Pressure Added{7201,7557}
1980/08/25
Install New Damper Assemblies During Assembly Of Radiator And Guard {1353,1381}
1980/09/22
Use Correct Procedures To Charge Suspension Cylinders With Oil {7201}
1980/09/22
Increased Clearance Between Hoist Cylinder Assembly And Rod{5102,7258}
1982/03/29
External Reinforcements Can Be Added To Main Frames{7051}
1982/04/26
New Pins Used In Dump Body Support Assembly{7258}
1982/04/26
New Wear Ring In Front Suspension Cylinders{7201}
1982/06/28
Use Caution When Suspension Cylinders Are Serviced; New Cover Assembly And Warning Label{7201,7557}
1982/08/09
New Gauge Block And New Charging Procedure For Front Suspension Cylinders{7201,0654}
1982/11/01
Changes In Assembly Procedure For Front Suspension Cylinders{7201}
1983/01/17
Modifications Can Be Made To Improve Distribution Of Exhaust Through The Truck Dump Body Ribs{7258,1059,1061,1062}
1984/07/09
Drive Shaft Restraint Added To Drive Shaft Guard Group{3253}
1984/10/01
New Gland, Wear Ring And Additional Grease Relief Fitting In Front Suspension Groups{7201,7200}
1984/10/01
Replace Grease Relief Fittings During Repair Of Front Suspension Cylinders{7200,7201}
1985/04/22
Improved Charging Valve For Accumulators And Suspension Cylinders{7107,7201}
1985/06/17
New Seals Used In Front Suspension Cylinder Groups{7201}
1985/08/26
Put Anti-Seize Compound On Body, Hoist, And Suspension Cylinder Pins{7201,7258}
1985/09/23
New Service Parts Available To Repair Scraper Components{6201,6203,6204,6207,6212}
1986/02/17
New Rock Ejectors {4203,7157}
1987/05/11
New Rear Suspension Cylinders With Built-In Stops Used{7051,7213}
1988/05/16
Dimensions For Charging Suspension Cylinders{7201,7213}
1988/05/16
Improved Hardware Now Used To Fasten Front Suspension Cylinder To Frame{7201}
1979/09/03
New Tools Available To Remove Axle From Front Suspension Cylinder{0621,4313,7201}
1979/09/24
Bolts Now Used in Place of Studs in Front Suspension Cylinders{7201}
1990/07/09
Head Bolts Added To Front Suspension Groups{7201}
1990/12/24
Gussets Added To Upper Front Suspension Strut Mounts To Help Prevent Frame Cracks{7051}
1991/03/25
Individual Auto Lube Injectors Now Available{7540}
1992/07/13
Procedure To Set Automatic Lubricator{7500,7540}
1992/10/12
New Snap-In Type Rod Wiper Replacement For Truck Suspension Groups And Hoist Cylinder Groups{7201,7213}
1993/05/24
New Suspension Cylinder Rod Seals For Arctic Region Applications {7201,7213}
1994/02/21
New Valve Lifter Assembly Provides Improved Lubrication Of Lifter Roller And Camshaft Lobes{1209,1210}
1994/06/20
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Service Magazine
Procedure To Set Automatic Lubricator{7500,7540}
1992/10/12
Special Instruction
Assembly and Installation of Inverted Duo-Cone Seals{7561}
Assembly and Installation of Inverted Duo-Cone Seals{7561}
Service Magazine
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Tool Operating Manual
NEHS1120: Truck Body Lifting Pins {0599, 0629, 0632, 0757, 1122, 7006, 7006, 7258}
NEHS1120: Truck Body Lifting Pins {0599, 0629, 0632, 0757, 1122, 7006, 7006, 7258}
148-0357 Front Strut Handling Group {0374, 0599, 0632, 0700, 0756}
148-0357 Front Strut Handling Group {0374, 0599, 0632, 0700, 0756}
270-8312 Strut Handler{0599, 0756, 7200, 7201}
270-8312 Strut Handler{0599, 0756, 7200, 7201}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}
NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}
Reuse And Salvage Guidelines
Reuse and Salvage Guideline for Front Suspension Cylinder Housings and Heads on Off-Highway Trucks {0374, 0599, 7201}
Reuse and Salvage Guideline for Front Suspension Cylinder Housings and Heads on Off-Highway Trucks {0374, 0599, 7201}
Disassembly and Assembly
Body Retaining Pins
772B TRACTOR & 773B TRUCK POWER TRAIN
Body Support (FT1452)
772B TRACTOR & 773B TRUCK POWER TRAIN
Body Retaining Pins
772B TRACTOR & 773B TRUCK & 775B QUARRY TRUCK POWER TRAIN
Body Support (FT1452)
772B TRACTOR & 773B TRUCK & 775B QUARRY TRUCK POWER TRAIN
Body Retaining Pins
772B TRACTOR & 773B TRUCK MACHINE SYSTEMS
Body Support (FT1452)
772B TRACTOR & 773B TRUCK MACHINE SYSTEMS
BODY SUPPORT (FT1452)
772B TRACTOR & 773B TRUCK POWER TRAIN
Body Support (FT1452)
773B TRUCK VEHICLE SYSTEMS
Service Letter-NACD
A Plate Needs To Be Welded To The Catwalk On Certain 773B And 775B Trucks
A Plate Needs To Be Welded To The Catwalk On Certain 773B And 775B Trucks
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Improved Front Catwalk Assembly Mounting {7250,7255,7323,7325}
1992/03/23
Reuse And Salvage Guidelines
Thermal Spray Procedures for OHT Front Duo-Cone Seal Retainer {0679, 3259, 4201, 4205}
Thermal Spray Procedures for OHT Front Duo-Cone Seal Retainer {0679, 3259, 4201, 4205}
Service Magazine
Do Not Weld Repair Worn Wheel Spindles For Off-Highway Trucks Or Wheel Tractor-Scrapers{4002,4205,4234}
1991/05/20
Duo-Cone Seal Assemblies With A Toric Available For Tractors And Trucks{4006,7555,4251,7561}
1997/08/04
Films For Electronic Controls Must Be Ordered Separately If Controls Are Replaced {3173,4200,7401,7451,7557}
1986/07/07
Special Instruction
Assembly Of 7S5437 Nitrogen Charging Group And 5P8610 Auxiliary Fitting Group{0647, 7200}
Assembly Of 7S5437 Nitrogen Charging Group And 5P8610 Auxiliary Fitting Group{0647, 7200}
Procedure to Replace the 9T-2238 Valve As with a 238-9928 Valve As in the Suspension Group on Certain Off-Highway Trucks{7201, 7213}
Procedure to Replace the 9T-2238 Valve As with a 238-9928 Valve As in the Suspension Group on Certain Off-Highway Trucks{7201, 7213}
Procedure to Troubleshoot the Loss of Nitrogen Precharge or Oil from Suspension Cylinders {0756, 7200, 7201, 7201, 7201, 7213}
Procedure to Troubleshoot the Loss of Nitrogen Precharge or Oil from Suspension Cylinders {0756, 7200, 7201, 7201, 7201, 7213}
Service Letter-NACD
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Product Support Program For Replacing The Rear Suspension Strut Boots And Clamps On Certain 768C, 772B, And 776B Tractors; And 769C, 771C, 773B, 775B, And 777C Trucks
Product Support Program For Replacing The Rear Suspension Strut Boots And Clamps On Certain 768C, 772B, And 776B Tractors; And 769C, 771C, 773B, 775B, And 777C Trucks
Service Letter-Australia
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Product Support Program For Replacing The Rear Suspension Strut Boots And Clamps On Certain 768C, 772B, And 776B Tractors; And 769C, 771C, 773B, 775B, And 777C Trucks
Product Support Program For Replacing The Rear Suspension Strut Boots And Clamps On Certain 768C, 772B, And 776B Tractors; And 769C, 771C, 773B, 775B, And 777C Trucks
Service Letter-CFEL
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Product Support Program For Replacing The Rear Suspension Strut Boots And Clamps On Certain 768C, 772B, And 776B Tractors; And 769C, 771C, 773B, 775B, And 777C Trucks
Product Support Program For Replacing The Rear Suspension Strut Boots And Clamps On Certain 768C, 772B, And 776B Tractors; And 769C, 771C, 773B, 775B, And 777C Trucks
Service Letter-CSARL
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Product Support Program For Replacing The Rear Suspension Strut Boots And Clamps On Certain 768C, 772B, And 776B Tractors; And 769C, 771C, 773B, 775B, And 777C Trucks
Product Support Program For Replacing The Rear Suspension Strut Boots And Clamps On Certain 768C, 772B, And 776B Tractors; And 769C, 771C, 773B, 775B, And 777C Trucks
Service Letter-Americas
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Product Support Program For Replacing The Rear Suspension Strut Boots And Clamps On Certain 768C, 772B, And 776B Tractors; And 769C, 771C, 773B, 775B, And 777C Trucks
Product Support Program For Replacing The Rear Suspension Strut Boots And Clamps On Certain 768C, 772B, And 776B Tractors; And 769C, 771C, 773B, 775B, And 777C Trucks
Service Letter-Brazil
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Product Support Program For Replacing The Rear Suspension Strut Boots And Clamps On Certain 768C, 772B, And 776B Tractors; And 769C, 771C, 773B, 775B, And 777C Trucks
Product Support Program For Replacing The Rear Suspension Strut Boots And Clamps On Certain 768C, 772B, And 776B Tractors; And 769C, 771C, 773B, 775B, And 777C Trucks
Technical Information Bulletin
Use Of &quot;ARCTIC REGION&quot; Suspension Cylinder Seals In Temperate Climate Applications
Use Of "ARCTIC REGION" Suspension Cylinder Seals In Temperate Climate Applications
Procedure For Adjusting The Check Valve In The Suspension Cylinders On All Trucks That Are Equipped With TPMS
Procedure For Adjusting The Check Valve In The Suspension Cylinders On All Trucks That Are Equipped With TPMS
Specifications
Front Wheel And Suspension Groups<BR> 6G-8241; 9D-7340 (Part Of 8W-7215 (772B) And 8W-7213 (773B) Chassis Arrangement)
772B TRACTOR AND 773B TRUCK STEERING SYSTEM
Introduction
772B TRACTOR AND 773B TRUCK SUSPENSION CYLINDERS
Front Suspension Cylinders<BR> 9D-7340 Front Suspension Group; 1U-4777 Front Suspension Group
772B TRACTOR AND 773B TRUCK SUSPENSION CYLINDERS
Rear Suspension Cylinders<BR> 9D-7350 Rear Suspension Group; 9T-6082 Rear Suspension Group
772B TRACTOR AND 773B TRUCK SUSPENSION CYLINDERS
Introduction
772B TRACTOR & 773B TRUCK SUSPENSION CYLINDERS
Front Suspension Cylinders<BR> (9J2016 &amp; 1U4777)
772B TRACTOR & 773B TRUCK SUSPENSION CYLINDERS
Rear Suspension Cylinders<BR> (8J9332)
772B TRACTOR & 773B TRUCK SUSPENSION CYLINDERS
Tool Operating Manual
Assembly of 175-5507 and 361-3889 Nitrogen Charging Groups and 175-7410 Auxiliary Fitting Group{0647, 7200}
Assembly of 175-5507 and 361-3889 Nitrogen Charging Groups and 175-7410 Auxiliary Fitting Group{0647, 7200}
148-0357 Front Strut Handling Group {0374, 0599, 0632, 0700, 0756}
148-0357 Front Strut Handling Group {0374, 0599, 0632, 0700, 0756}
270-8312 Strut Handler{0599, 0756, 7200, 7201}
270-8312 Strut Handler{0599, 0756, 7200, 7201}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Service Letter-China
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Product Support Program For Replacing The Rear Suspension Strut Boots And Clamps On Certain 768C, 772B, And 776B Tractors; And 769C, 771C, 773B, 775B, And 777C Trucks
Product Support Program For Replacing The Rear Suspension Strut Boots And Clamps On Certain 768C, 772B, And 776B Tractors; And 769C, 771C, 773B, 775B, And 777C Trucks
Service Letter-Asia
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Product Support Program For Replacing The Rear Suspension Strut Boots And Clamps On Certain 768C, 772B, And 776B Tractors; And 769C, 771C, 773B, 775B, And 777C Trucks
Product Support Program For Replacing The Rear Suspension Strut Boots And Clamps On Certain 768C, 772B, And 776B Tractors; And 769C, 771C, 773B, 775B, And 777C Trucks
Systems Operation
Systems Operation
772B TRACTOR AND 773B TRUCK SUSPENSION CYLINDERS
Systems Operation
772B TRACTOR & 773B TRUCK SUSPENSION CYLINDERS
Reuse And Salvage Guidelines
Reuse and Salvage Guideline for Front Suspension Cylinder Housings and Heads on Off-Highway Trucks {0374, 0599, 7201}
Reuse and Salvage Guideline for Front Suspension Cylinder Housings and Heads on Off-Highway Trucks {0374, 0599, 7201}
Specifications for Rear Suspension Cylinder Components Used in Off-Highway Trucks {7201}
Specifications for Rear Suspension Cylinder Components Used in Off-Highway Trucks {7201}
Thermal Spray Procedures for OHT Front Struts{0599, 0679, 7201}
Thermal Spray Procedures for OHT Front Struts{0599, 0679, 7201}
Thermal Spray Procedures for OHT Rear Strut - Head / Flange End{0374, 0599, 0679, 7201, 7213}
Thermal Spray Procedures for OHT Rear Strut - Head / Flange End{0374, 0599, 0679, 7201, 7213}
Thermal Spray Procedures for OHT Rear Struts{0599, 0679, 7201, 7213}
Thermal Spray Procedures for OHT Rear Struts{0599, 0679, 7201, 7213}
Service Letter-APD
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Certain Remanufactured Hydraulic Suspension Cylinder Rod Assemblies Need To Be Reworked
Product Support Program For Replacing The Rear Suspension Strut Boots And Clamps On Certain 768C, 772B, And 776B Tractors; And 769C, 771C, 773B, 775B, And 777C Trucks
Product Support Program For Replacing The Rear Suspension Strut Boots And Clamps On Certain 768C, 772B, And 776B Tractors; And 769C, 771C, 773B, 775B, And 777C Trucks
Testing and Adjusting
Testing And Adjusting
772B TRACTOR AND 773B TRUCK SUSPENSION CYLINDERS
Testing And Adjusting
772B TRACTOR & 773B TRUCK SUSPENSION CYLINDERS
Troubleshooting
Payload F01 - Suspension Cylinder (Left Front) Incorrect Charge
69D, 73D, 769C, 769D, 773B, 773D, 773E, 776B, 776C, 776D, 777B, 777C, 777D, 784B, 785, 785B, 789 and 793 Off-Highway Truck/Tractors and 771D, 775B, 775D and 775E Quarry Trucks Payload System
Payload F02 - Suspension Cylinder (Right Front) Incorrect Charge
69D, 73D, 769C, 769D, 773B, 773D, 773E, 776B, 776C, 776D, 777B, 777C, 777D, 784B, 785, 785B, 789 and 793 Off-Highway Truck/Tractors and 771D, 775B, 775D and 775E Quarry Trucks Payload System
Payload F03 - Suspension Cylinder (Left Rear) Incorrect Charge
69D, 73D, 769C, 769D, 773B, 773D, 773E, 776B, 776C, 776D, 777B, 777C, 777D, 784B, 785, 785B, 789 and 793 Off-Highway Truck/Tractors and 771D, 775B, 775D and 775E Quarry Trucks Payload System
Payload F04 - Suspension Cylinder (Right Rear) Incorrect Charge
69D, 73D, 769C, 769D, 773B, 773D, 773E, 776B, 776C, 776D, 777B, 777C, 777D, 784B, 785, 785B, 789 and 793 Off-Highway Truck/Tractors and 771D, 775B, 775D and 775E Quarry Trucks Payload System
Disassembly and Assembly
Front Suspension Cylinders
772B TRACTOR & 773B TRUCK VEHICLE SYSTEMS
Rear Suspension Cylinders
772B TRACTOR & 773B TRUCK VEHICLE SYSTEMS
Front Suspension Cylinders
772B TRACTOR & 773B TRUCK MACHINE SYSTEMS
Rear Suspension Cylinders
772B TRACTOR & 773B TRUCK MACHINE SYSTEMS
Front Suspension Cylinders
773B TRUCK VEHICLE SYSTEMS
Rear Suspension Cylinders
773B TRUCK VEHICLE SYSTEMS
Service Magazine
Change To Service Pressure (Operating-Loaded) Shown On Warning Plate For Rear Suspension Cylinders; Minimum Bursting Pressure Added{7201,7557}
1980/08/25
Use Correct Procedures To Charge Suspension Cylinders With Oil {7201}
1980/09/22
New Wear Ring In Front Suspension Cylinders{7201}
1982/06/28
Use Caution When Suspension Cylinders Are Serviced; New Cover Assembly And Warning Label{7201,7557}
1982/08/09
Different Nuts And Washers, Increased Torque Prevent Loose Pistons, Broken Bolts In Suspension Cylinders {7201}
1982/09/13
New Gauge Block And New Charging Procedure For Front Suspension Cylinders{7201,0654}
1982/11/01
Changes In Assembly Procedure For Front Suspension Cylinders{7201}
1983/01/17
New Gland, Wear Ring And Additional Grease Relief Fitting In Front Suspension Groups{7201,7200}
1984/10/01
Cover Added To Rear Suspension Cylinders To Protect Cylinder Rod Seals {7201}
1985/01/14
Replace Grease Relief Fittings During Repair Of Front Suspension Cylinders{7200,7201}
1985/04/22
Improved Charging Valve For Accumulators And Suspension Cylinders{7107,7201}
1985/06/17
New Seals Used In Front Suspension Cylinder Groups{7201}
1985/08/26
Put Anti-Seize Compound On Body, Hoist, And Suspension Cylinder Pins{7201,7258}
1985/09/23
Machining Former Gland On Front Suspension Cylinder So Wear Ring Can Be Used{7201}
1986/11/24
New Wear Rings Used In Suspension Cylinders {7201,7213}
1987/01/26
New Rear Suspension Cylinders With Built-In Stops Used{7051,7213}
1988/05/16
Dimensions For Charging Suspension Cylinders{7201,7213}
1988/05/16
The FT1330 Strut Adapter Has Been Redesigned To Make Its Use Easier{0621}
1979/03/26
Improved Hardware Now Used To Fasten Front Suspension Cylinder To Frame{7201}
1979/09/03
New Tools Available To Remove Axle From Front Suspension Cylinder{0621,4313,7201}
1979/09/24
Bolts Now Used in Place of Studs in Front Suspension Cylinders{7201}
1990/07/09
Head Bolts Added To Front Suspension Groups{7201}
1990/12/24
Gussets Added To Upper Front Suspension Strut Mounts To Help Prevent Frame Cracks{7051}
1991/03/25
New Snap-In Type Rod Wiper Replacement For Truck Suspension Groups And Hoist Cylinder Groups{7201,7213}
1993/05/24
Front Suspension Group Uses Larger Bolts For Improved Retention Of Piston{7201}
1993/09/27
New Suspension Cylinder Rod Seals For Arctic Region Applications {7201,7213}
1994/02/21
New Suspension Cylinder Rod Seals For Arctic Region Applications {7201,7213}
1994/03/21
Fabric Suspension Cylinder Covers Are Now Used To Protect Cylinder Rods{7201}
1994/09/05
New Method Used To Install Fabric Covers For Rear Suspension Cylinders{7201}
1995/06/05
Low Friction Wear Ring Is Available For The Front Suspension Cylinders To Help Reduce Vibration{7201}
1995/08/21
New Method Used To Install Fabric Covers For Rear Suspension Cylinders{7201}
1995/10/16
New Suspension Cylinder Rod Seals Reduce Leakage In All Applications{7201,7213}
1995/10/16
Wheel Bearing Adjustment Intervals {4208,4201}
1996/01/29
Wheel Bearing Adjustment Intervals {4201,4208}
1996/05/06
Field Repair For Cracked Upper Strut Mount Plate{7051}
1996/06/03
New Check Valve Group And Larger O-ring For Load Monitoring System Eliminates O-ring Interference {5067,7200}
1997/01/20
Cylinder Rod For Suspension Cylinder Groups Has Larger Diameter Bolts For Piston Retention{7201}
1997/05/19
Cylinder Head For Front Suspension Cylinder Group Repositioned To Give Clearance Between Monitoring Sensor For Truck Payload And Truck Frame{7201,7494}
1997/10/13
New U-Cup Seal In Front And Rear Suspension Cylinder Groups Increases Service Life{7201}
1997/12/08
New U-Cup Seal In Front And Rear Suspension Cylinder Groups Increases Service Life{7201}
1998/01/19
Weld Repair Procedure For Rear Upper Front Strut Mounting Plates {7050,7201}
1998/05/11
A New Valve Core With a Higher Pressure Rating Has Improved Service Life {7200}
2000/01/10
A New Nitrogen Charging Valve Is Available {7200, 7201, 7213}
2004/07/26
The Exterior Head Bolts on the Front Suspension Cylinders have a Different Torque Specification for Assembly and a Different Torque Specification for Inspection. {7200, 7201}
2005/04/04
Additions to the Maintenance Interval Schedule for Suspension Cylinders {7201, 7500}
2005/11/14
Metal Case Rod Wipers are now used in the Suspension Groups for the Trucks for Better Retention of the Wiper Seal {7201, 7213}
2010/01/22
New Caulking Procedure for Front Suspension Group Heads {7201}
2011/02/17
New Pins and Washers Are Now Used in the Rear Suspension Group for Certain Off-Highway Trucks {7201, 7213}
2013/01/15
A New Housing and Sealing System are Now Used on the Front Suspension Group for certain Off-Highway Trucks {7201, 7555}
2014/05/13
A New U-Cup Seal Is Now Used in the Front Suspension Group for Certain Off-Highway Trucks {7200, 7201, 7555}
2014/10/01
Reman Upgrade-To-New Hydraulic Rods and Cylinders Now Available for Certain Off-Highway Trucks/Tractors, Quarry Trucks, Track-Type Tractors, Wheel Dozers, and Wheel Loaders {4303, 5102, 5104, 7201}
2015/05/28

Truck sale:

Caterpillar 773B
 
Caterpillar 773B
- Off Highway Trucks
FINANZAUTO S.A.
Caterpillar 773B, Off Highway Trucks, Construction
29,488 
Caterpillar 773B, Off Highway Trucks, Construction
- Off Highway Trucks
FINANZAUTO S.A.
Caterpillar 773B
 
Caterpillar 773B
- Off Highway Trucks
FINANZAUTO S.A.
 
26.000 
Caterpillar 773B, Dumper - Knickgelenk, Bau-Und Bergbauausrüstung
- Articulated Dump Trucks (ADTs)
QUINN COMPANY
 
26.000 
Caterpillar 773B, Dumper - Knickgelenk, Bau-Und Bergbauausrüstung
- Articulated Dump Trucks (ADTs)
QUINN COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.