AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8E4077 BULLDOZER AR POWER ANGLING & TILT (LGP) BULLDOZER S/N 6DH1-UP AN ATTACHMENT D4C II TRACK-TYPE TRACTOR


IMPLEMENTS
BULLDOZER GP
TRUNNION GP
WORK TOOLS
BLADE GP
GROUND ENGAGING TOOLS (G.E.T.)
BLADE GP
GROUND ENGAGING TOOLS (G.E.T.)
IMPLEMENTS
C-FRAME GP
WORK TOOLS
RIPPER GP

TRACK-TYPE TRACTOR D4C II TRACK-TYPE TRACTOR 7KG
 D4C & D4C LGP SERIES II TRACTORS / POWER SHIFT / 7KG00001-UP (MACHINE) POWERED BY 3204 ENGINE SEBP1948 D4C II 7KG   (1990)

IMPLEMENTS

BULLDOZER GP
8E-4071 BULLDOZER AR-ANGLING
8E-4070 BULLDOZER AR-ANGLING
8E-4077 BULLDOZER AR-ANGLING
8E-4076 BULLDOZER AR-ANGLING
 

#SEBP19480240
 

8E-4077: BULLDOZER AR-ANGLING

8E4077 BULLDOZER AR
POWER ANGLING & TILT (LGP)
BULLDOZER S/N 6DH1-UP
AN ATTACHMENT
SEBP19480240 SEBP1948
  For full view, you need register

Parts for your D4C II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  6Y-5534 Y [1] BLADE GP-ANGLING  
   
  3G-3440 Y [1] C-FRAME GP  
  9J-8674 Y [1] CYLINDER GP-TILT  
   
  [1] PLATE-SERIAL NUMBER  
    ON BACK OF BLADE ASSEMBLY,
    NEAR TOP, ON RH SIDE
   
  7B-3028 [2] SCREW-DRIVE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19480241
 

8E-4076: BULLDOZER AR-ANGLING

8E4076 BULLDOZER AR
POWER ANGLING & TILT (LGP)
BULLDOZER S/N 6DH1-UP
AN ATTACHMENT
SEBP19480241 SEBP1948
  For full view, you need register

Parts for your D4C II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  6Y-5534 Y [1] BLADE GP-ANGLING  
   
  3G-3440 Y [1] C-FRAME GP  
  9J-8698 Y [2] CYLINDER GP-ANGLING  
  7J-9223 Y [2] CYLINDER GP-LIFT  
  9J-8674 Y [1] CYLINDER GP-TILT  
   
  8E-4278 Y [1] LINES GP-ANGLE & TILT  
   
  8E-4276 Y [1] MOUNTING GP-CYLINDER LINES  
  5G-0269 Y [1] MOUNTING GP-TRUNNION  
   
  [1] PLATE-SERIAL NUMBER  
    ON BACK OF BLADE ASSEMBLY,
    NEAR TOP, ON RH SIDE
   
  7B-3028 [2] SCREW-DRIVE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19480242
 

5G-0269: MOUNTING GP-TRUNNION

5G0269 MOUNTING GP-TRUNNION
BULLDOZER S/N 6CH1-UP,6DH1-UP
PART OF 8E4070, 8E4076 BULLDOZER ARS
AN ATTACHMENT
c676218 SEBP1948
5G0269 MOUNTING GP-TRUNNION Parts scheme
  For full view, you need register

Parts for your D4C II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-2521 C [2] NUT-FULL  
2. 7X-0601 C [2] WASHER-HARD  
3. 8E-4025 C [2] EYEBOLT  
4. 3B-8489 C [2] FITTING-GREASE (1/8-27 THD)  
5. 6V-5002 C [2] BEARING-ALIGNING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19480243
 

6Y-5526: BLADE GP-ANGLING

6Y5526 BLADE GP-ANGLING
BULLDOZER S/N 6CH1-UP
6Y5835-PAGE 184
PART OF 8E4070, 8E4071 BULLDOZER ARS
AN ATTACHMENT
c703124 SEBP1948
6Y5526 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D4C II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-5527 [1] BLADE AS-ANGLING  
2. 8J-3989 [1] BRACKET AS  
  7J-5131 [1] TRUNNION  
3. 8E-4736 [1] PLATE AS  
4. 8P-9770 [1] PLATE  
5. 6Y-4778 [1] PLATE AS  
6. 6Y-3196 BRACKET AS  
7. 7X-0346 [2] BOLT  
8. 8E-4711 [1] PLATE  
9. 1A-2029 [3] BOLT  
  8J-0729 [3] RETAINER  
10. 8J-3344 [2] SPACER  
11. 6Y-5835 Y [1] BIT & CUTTING EDGE GP  
12. 9J-9004 [4] SPACER  
13. 6Y-1421 [3] PIN  
14. 6S-9051 [1] BUSHING-TERMINAL  
15. 8E-4709 [1] PIN AS  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19480244
 

6Y-5835: BIT & CUTTING EDGE GP

6Y5835 BIT & CUTTING EDGE GP
BULLDOZER S/N 6CH1-UP
PART OF 6Y5526 BLADE-ANGLING
AN ATTACHMENT
c495717 SEBP1948
6Y5835 BIT & CUTTING EDGE GP Parts scheme
  For full view, you need register

Parts for your D4C II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-5839 [1] BIT-END-RH  
  6Y-5840 [1] BIT-END-LH  
2. 6Y-5841 [2] EDGE-CUTTING  
3. 3F-5108 [18] BOLT-PLOW  
  5P-8247 [18] WASHER-HARD  
  4K-0367 [18] NUT  
 

#SEBP19480245
 

6Y-5534: BLADE GP-ANGLING

6Y5534 BLADE GP-ANGLING
BULLDOZER S/N 6DH1-UP
6Y5836-PAGE 186
PART OF 8E4076, 8E4077 BULLDOZER ARS
AN ATTACHMENT
c517334 SEBP1948
6Y5534 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D4C II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-4709 [1] PIN AS  
2. 6Y-1421 [3] PIN  
3. 8J-0729 [3] RETAINER  
4. 1A-2029 [3] BOLT  
5. 8J-3344 [2] SPACER  
6. 9J-9004 [4] SPACER  
7. 6Y-5836 Y [1] BIT & CUTTING EDGE GP  
8. 7X-0346 [2] BOLT  
9. 6S-9051 [1] BUSHING  
10. 8E-4711 [1] PLATE  
11. 6Y-5535 [1] BLADE AS-ANGLING  
12. 6Y-3196 [1] BRACKET AS  
13. 8J-3989 [1] BRACKET AS  
  7J-5131 [1] TRUNNION  
14. 8P-9770 [1] PLATE  
15. 6Y-4778 [1] PLATE AS  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19480246
 

6Y-5836: BIT & CUTTING EDGE GP

6Y5836 BIT & CUTTING EDGE GP
BULLDOZER S/N 6DH1-UP
PART OF 6Y5534 BLADE-ANGLING
AN ATTACHMENT
c496450 SEBP1948
6Y5836 BIT & CUTTING EDGE GP Parts scheme
  For full view, you need register

Parts for your D4C II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-5839 [1] BIT-END-RH  
  6Y-5840 [1] BIT-END-LH  
2. 6Y-5842 [2] EDGE-CUTTING  
3. 3F-5108 [22] BOLT-PLOW  
  5P-8247 [22] WASHER-HARD  
  4K-0367 [22] NUT  
 

#SEBP19480247
 

3G-3440: C-FRAME GP

3G3440 C-FRAME GP
BULLDOZER S/N 6DH1-UP
PART OF 8E4076, 8E4077 BULLDOZER ARS
AN ATTACHMENT
c641583 SEBP1948
3G3440 C-FRAME GP Parts scheme
  For full view, you need register

Parts for your D4C II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-1076 C [4] WASHER-HARD (4MM THK)  
  8E-4072 C [4] SPACER (16MM THK)  
2. 5P-2566 C [4] BOLT  
3. 8E-4026 C [2] PIN AS  
4. 150-0353 [4] SPACER  
5. 8J-0927 [4] PIN  
6. 120-4792 [1] C-FRAME AS  
  8E-5701 B [14] SHIM (.03IN THK)  
6A. 6L-1649 [1] SEAL-O-RING  
6B. 8E-8842 [1] BRACKET AS  
6C. 3G-2569 [1] CAP-BEARING  
6D. 061-6712 [1] RING-RETAINING  
7. 6M-4016 [6] LUG  
8. 4D-9376 [5] BOSS  
9. 8J-3372 [1] BRACKET AS  
10. 8J-3443 [2] BEARING  
11. 8P-9770 [1] PLATE  
12. 117-4635 C [1] PLATE AS  
13. 8J-1148 C [4] BOLT  
14. 8J-0928 [1] PIN  
15. 150-0351 [2] SPACER  
16. 3G-2569 [1] CAP-BEARING  
  8E-5702 B [26] SHIM (0.8MM THK)  
17. 1D-4634 [4] BOLT  
18. 1A-2029 [5] BOLT  
19. 8J-0729 [5] RETAINER  
20. 8E-3308 BC [2] SPACER (25MM THK)  
  8E-3315 BC [2] SPACER (12MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19480248
 

9W-9579: C-FRAME GP

9W9579 C-FRAME GP
POWER ANGLING
BULLDOZER S/N 6CH1-UP
PART OF 8E4070, 8E4071 BULLDOZER ARS
AN ATTACHMENT
c960800 SEBP1948
9W9579 C-FRAME GP Parts scheme
  For full view, you need register

Parts for your D4C II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-1076 [4] WASHER-HARD (4MM THK)  
  8E-4072 C [4] SPACER (16MM THK)  
2. 5P-2566 C [4] BOLT  
3. 8E-4026 C [2] PIN AS  
4. 150-0353 [4] SPACER (14.0 MM THK)  
5. 8J-0927 [4] PIN  
6. 120-5287 C [1] C-FRAME AS  
6A. 6L-1649 [1] SEAL-O-RING  
6B. 8E-8842 [1] BRACKET AS  
6C. 3G-2569 [1] CAP-BEARING  
6D. 061-6712 [1] RING-RETAINING  
  8E-5702 B [14] SHIM (0.8 MM THK)  
7. 6M-4016 [6] LUG  
8. 4D-9376 [5] BOSS (3/8-16 THD)  
9. 8J-3372 [1] BRACKET AS  
10. 8J-3443 [2] BEARING  
11. 8P-9770 [1] PLATE  
12. 117-4635 C [1] PLATE AS  
13. 8J-1148 C [4] BOLT (3/4-10X4.5 IN)  
14. 8J-0928 [1] PIN  
15. 150-0351 [2] SPACER 20.8 MM THK)  
16. 3G-2569 [1] CAP-BEARING  
  8E-5702 B [26] SHIM (0.8MM THK)  
17. 1D-4634 [4] BOLT 7/8-9X5.5 IN)  
18. 1A-2029 [5] BOLT (3/8-16X1.125 IN)  
19. 8J-0729 [5] RETAINER  
20. 8E-3308 B [2] SPACER (25MM THK)  
  8E-3315 B [2] SPACER (12MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19480249
 

8J-3294: MOUNTING GP-RIPPER

8J3294 MOUNTING GP-RIPPER
RIPPER S/N 84U1-UP
PART OF 9J9005 RIPPER AR
AN ATTACHMENT
c496012 SEBP1948
8J3294 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D4C II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5D-3118 [6] STUD-TAPERLOCK  
2. 6V-8190 [10] NUT  
  7X-0529 [10] WASHER-HARD  
3. 8J-3281 [1] PLATE AS-RH  
4. 1J-6748 [3] PIN  
  3B-4627 [3] COTTER (PIN)  
5. 8J-3285 [2] PIN  
6. 8J-3282 [1] PLATE AS-LH  
7. 9M-5854 [4] STUD-TAPERLOCK  
8. 8J-3286 [1] PLATE AS  
9. 4F-2042 [1] PIN  
 

Information:

Caterpillar Parts SIS Catalog D4C II :

8E-4070 BULLDOZER AR-ANGLING
8E-4071 BULLDOZER AR-ANGLING
LINES GP-HYDRAULIC
8Y-5054 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
8Y-5054 LINES GP-HYDRAULIC
VALVE GP-CONTROL
9T-7651 VALVE GP-CONTROL
VALVE GP-CONTROL
9T-7642 VALVE GP-CONTROL
VALVE GP-RELIEF
9T-7639 VALVE GP-RELIEF
VALVE GP-CONTROL
9T-7641 VALVE GP-CONTROL
8E-4076 BULLDOZER AR-ANGLING
MOUNTING GP-TRUNNION
5G-0269 MOUNTING GP-TRUNNION
BLADE GP-ANGLING
6Y-5526 BLADE GP-ANGLING
BIT & CUTTING EDGE GP
6Y-5835 BIT & CUTTING EDGE GP
BLADE GP-ANGLING
6Y-5534 BLADE GP-ANGLING
BIT & CUTTING EDGE GP
6Y-5836 BIT & CUTTING EDGE GP
C-FRAME GP
3G-3440 C-FRAME GP
C-FRAME GP
9W-9579 C-FRAME GP

Truck sale:

Caterpillar D4CIILGP, Construction
40,000 
Caterpillar D4CIILGP, Construction
- Dozers
ALTORFER INC.
 
 
1993 CAT D4C II

Petrowsky Auctioneers Inc
Cromwell, Connecticut
2000 CAT D4C II
USD $34,500 
2000 CAT D4C II

Centex Equipment Sales
Brownwood, Texas
1991 CAT D4C II
USD $22,500 
1991 CAT D4C II

Mike's Machinery
Starkville, Mississippi
1993 CAT D4C II
USD $19,500 
1993 CAT D4C II

Chris Williams Excavating Inc.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.