AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W-2172 COVER GP-VALVE MECHANISM 3116 TRUCK ENGINE


BASIC ENGINE
VALVE MECHANISM GP
CRANKSHAFT GP
CYLINDER BLOCK GP

TRUCK ENGINE 3116 TRUCK ENGINE 2BK
 3116 Truck Engine 2BK00001-UP SEBP1951 3116 2BK   (1990)

BASIC ENGINE

VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
4P-0600 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
4P-3572 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
4W-2172 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
6I-3336 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
7E-9915 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
9Y-9507 COVER GP-VALVE MECHANISM
 

#SEBP19510290
 

4W-2172: COVER GP-VALVE MECHANISM

4W-2172 COVER GP-VALVE MECHANISM
i00122119 SEBP1951
4W2172 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-2940 [1] GASKET (VALVE COVER)  
2. 6V-2315 M [14] BOLT (M6X1X35-MM)  
3. 119-2960 [1] COVER  
4. 5P-0537 [14] WASHER-HARD (7.2X14.5X2-MM THK)  
  M   METRIC PART
 

#SEBP19510291
 

6I-3336: COVER GP-VALVE MECHANISM

6I-3336 COVER GP-VALVE MECHANISM
S/N 2BK18836-UP
i00396763 SEBP1951
6I3336 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-8103 [1] GASKET (VALVE COVER)  
2. 6V-8490 M [14] BOLT (M6X1X25-MM)  
3. 6I-2093 [1] COVER AS  
4. 5P-0537 [14] WASHER-HARD (7.2X14.5X2-MM THK)  
5. 7E-5380 [1] CAP-OIL FILLER (ENGINE)  
  M   METRIC PART
 

#SEBP19510292
 

7E-9915: COVER GP-VALVE MECHANISM

7E-9915 COVER GP-VALVE MECHANISM
FOR USE WITH TOP FRONT VALVE COVER OIL FILL
ALSO AN ATTACHMENT
i00392200 SEBP1951
7E9915 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-2940 [1] GASKET (VALVE COVER)  
2. 6V-2315 M [14] BOLT (M6X1X35-MM)  
3. 119-3014 [1] COVER  
4. 5P-0537 [14] WASHER-HARD (7.2X14.5X2-MM THK)  
5. 7E-5380 [1] CAP-OIL FILLER (ENGINE)  
  M   METRIC PART
 

#SEBP19510293
 

9Y-9507: COVER GP-VALVE MECHANISM

9Y-9507 COVER GP-VALVE MECHANISM
TALL WITH THREE EXTERNAL BOSSES
Type 2
ALSO AN ATTACHMENT
i02422892 SEBP1951
9Y9507 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-2940 [1] GASKET (VALVE COVER)  
2. 6V-2315 CM [14] BOLT (M6X1X35-MM)  
3. 119-2962 C [1] COVER  
4. 5P-0537 [14] WASHER-HARD (7.2X14.5X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP19510294
 

9Y-9507: COVER GP-VALVE MECHANISM

9Y-9507 COVER GP-VALVE MECHANISM
TALL WITH THREE EXTERNAL BOSSES
Type 1
ALSO AN ATTACHMENT
i00434104 SEBP1951
9Y9507 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-2940 [1] GASKET (VALVE COVER)  
2. 6V-8490 M [14] BOLT (M6X1X25-MM)  
3. 115-4263 [1] COVER  
4. 5P-0537 [14] WASHER-HARD (7.2X14.5X2-MM THK)  
  M   METRIC PART
 

#SEBP19510295
 

101-4559: CRANKSHAFT GP

101-4559 CRANKSHAFT GP
S/N 2BK33518-35053; 2BK36212-47823
i00463560 SEBP1951
1014559 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-1725 [1] CRANKSHAFT AS  
2. 1B-8705 [1] KEY-WOODRUFF  
3. 2W-8147 [1] GEAR (50-TEETH)  
4. 7W-9416 [1] BEARING-THRUST  
  7C-6969 AF BEARING-THRUST (0.5-MM OS)  
  7C-6970 AF BEARING-THRUST (0.5-MM OS, 0.5-MM US)  
  7C-6966 AF BEARING-THRUST (0.25-MM US)  
  7C-6967 AF BEARING-THRUST (0.5-MM US)  
5. 101-1530 [3] BEARING-MAIN  
6. 101-4543 [3] BEARING-MAIN  
  7C-7980 AF [1] SLEEVE-OIL SEAL  
    (THIS WEAR SLEEVE IS USED ONLY TO SALVAGE (REPAIR) THE REAR SEAL SURFACE OF THE CRANKSHAFT)
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP19510296
 

4W-2197: CRANKSHAFT GP

4W-2197 CRANKSHAFT GP
Type 1
i00122122 SEBP1951
4W2197 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-1725 [1] CRANKSHAFT AS  
2. 1B-8705 [1] KEY-WOODRUFF  
3. 2W-8147 [1] GEAR (50-TEETH)  
4. 107-7602 [1] BEARING-THRUST  
  7C-6969 AB BEARING-THRUST (0.5-MM OS)  
  7C-6970 AB BEARING-THRUST (0.5-MM OS, 0.5-MM US)  
  7C-6966 AB BEARING-THRUST (0.25-MM US)  
  7C-6967 AB BEARING-THRUST (0.5-MM US)  
5. 101-1530 [3] BEARING-MAIN  
  7C-6974 AB BEARING-MAIN (0.5-MM OS)  
  7C-6975 AB BEARING-MAIN (0.5-MM OS, 0.5-MM US)  
  7C-6971 AB BEARING-MAIN (0.25-MM US)  
  7C-6972 AB BEARING-MAIN (0.5-MM US)  
6. 107-7708 [3] BEARING-MAIN  
  7C-6964 AB BEARING-MAIN (0.5-MM OS)  
  7C-6965 AB BEARING-MAIN (0.5-MM OS, 0.5-MM US)  
  7C-6961 AB BEARING-MAIN (0.25-MM US)  
  7C-6962 AB BEARING-MAIN (0.5-MM US)  
   
  7C-7980 AF [1] SLEEVE-OIL SEAL  
    (USED ONLY TO REPAIR THE REAR SEAL SURFACE OF THE CRANKSHAFT)
   
    AVAILABLE REPAIR KIT(S):
  196-9518 KIT-BASIC ENGINE REPAIR (MAIN BEARING)(CRANKSHAFT)  
    (INCLUDES A COMPLETE SET OF STANDARD MAIN & THRUST BEARINGS)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP19510297
 

4W-2197: CRANKSHAFT GP

4W-2197 CRANKSHAFT GP
Type 2
i00887116 SEBP1951
4W2197 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 489-2731 [1] CRANKSHAFT AS  
1A. 1B-8705 [1] KEY-WOODRUFF  
1B. 2W-8147 [1] GEAR (50-TEETH)  
2. 212-4893 [1] BEARING-THRUST  
  229-5153 AB BEARING-THRUST (0.25-MM US)  
  229-5154 AB BEARING-THRUST (0.5-MM US)  
  229-5155 AB BEARING-THRUST (0.5-MM OS)  
  229-5156 AB BEARING-THRUST (0.5-MM OS, 0.5-MM US)  
3. 107-7708 [6] BEARING-MAIN  
  145-0162 AB BEARING-MAIN (0.25-MM US)  
  145-0164 AB BEARING-MAIN (0.5-MM US)  
  145-0168 AB BEARING-MAIN (0.5-MM OS)  
  145-0170 AB BEARING-MAIN (0.5-MM OS, 0.5-MM US)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP19510298
 

100-4948: CYLINDER BLOCK GP

100-4948 CYLINDER BLOCK GP
PART OF 2W-9746 CYLINDER BLOCK GP
i00122924 SEBP1951
1004948 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-6289 [1] CYLINDER BLOCK AS  
1A. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
1B. 9X-8916 M [14] BOLT (M16X2X140-MM)  
1C. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
2. 2M-9780 [1] SEAL-O-RING  
3. 2W-7211 [1] BUSHING (CAMSHAFT)  
4. 2M-6471 [2] PLUG-CUP  
5. 9S-8005 [1] PLUG (3/4-16-THD)  
6. 3K-0360 [1] SEAL-O-RING  
7. 2W-7213 [6] BUSHING (CAMSHAFT)  
8. 3D-2824 B [2] SEAL-O-RING  
9. 9S-8008 B [2] PLUG (1-1/16-12-THD)  
10. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
11. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
12. 3H-5552 [1] PLUG-CUP  
13. 9S-8006 [1] PLUG (7/8-14-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP19510299
 

105-1743: CYLINDER BLOCK GP

105-1743 CYLINDER BLOCK GP
S/N 2BK41510-41615
PART OF 105-1744 CYLINDER BLOCK GP
i00478318 SEBP1951
1051743 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
1A. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
1B. 9X-8916 M [14] BOLT (M16X2X140-MM)  
2. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
3. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
4. 2M-6471 [2] PLUG-CUP  
5. 9S-8008 [2] PLUG (1-1/16-12-THD)  
6. 3D-2824 [2] SEAL-O-RING  
7. 3H-5552 [1] PLUG-CUP  
8. 9S-8006 [1] PLUG (7/8-14-THD)  
9. 2M-9780 [1] SEAL-O-RING  
10. 2W-7211 [1] BUSHING (CAMSHAFT)  
11. 2W-7213 [6] BUSHING (CAMSHAFT)  
12. 3K-0360 [1] SEAL-O-RING  
13. 9S-8005 [1] PLUG (3/4-16-THD)  
  M   METRIC PART
 

Information:

Truck Engine News
New 8T2998 Lubricant Available
1986/02/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Initial Valve Lash Checking Interval Changed
1991/08/01
New Valve Cover Gasket Used{1107}
1994/01/01
New Valve Cover Gasket{1107}
1996/01/23
New Engine Lifter Arm Assembly With Crowned Roller Used In Lifter Groups{1209}
1998/05/01
A New Inlet Valve is Released for use in 3116 and 3126 Truck Engines with the Two Valve Configuration. {1105}
2000/06/01
Engine News
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Operation and Maintenance Manual
Engine Valve Lash - Inspect/Adjust
3116 Truck Engine
Fuel Injection Timing - Check
3116 Truck Engine
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Service Letter-NACD
Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck Engines; 3116 Industrial Engines; And 3116 Marine Engines
Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck Engines; 3116 Industrial Engines; And 3116 Marine Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Alternate Procedure For Repairing Oil Leaks Around The Cam Roller Follower Side Covers
Alternate Procedure For Repairing Oil Leaks Around The Cam Roller Follower Side Covers
Specifications
Unit Injector Mechanism
3116 Truck Engines
Valve Rocker Arms and Lifters
3116 Truck Engines
Valve Mechanism Cover
3116 Truck Engines
Service Letter-China
Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck Engines; 3116 Industrial Engines; And 3116 Marine Engines
Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck Engines; 3116 Industrial Engines; And 3116 Marine Engines
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck Engines; 3116 Industrial Engines; And 3116 Marine Engines
Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck Engines; 3116 Industrial Engines; And 3116 Marine Engines
Testing and Adjusting
Finding Top Center Position for No. 1 Piston
3116 Truck Engine
Engine Valve Lash - Inspect/Adjust
3116 Truck Engine
Troubleshooting
Excessive Valve Lash
3114, 3116 and 3126 Engines
Little or No Valve Lash
3114, 3116 and 3126 Engines
Valve Train Noise
3114, 3116 and 3126 Engines
Disassembly and Assembly
Valve Mechanism Cover - Remove and Install
3116 On Highway Engines
Rocker Shaft and Pushrod - Remove
3116 On Highway Engines
Rocker Shaft and Pushrod - Install
3116 On Highway Engines
Rocker Shaft - Disassemble
3116 On Highway Engines
Rocker Shaft - Assemble
3116 On Highway Engines
Lifter Group - Remove and Install
3116 On Highway Engines
Service Magazine
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Initial Valve Lash Checking Interval Changed {1105}
1991/08/26
Thicker Head Gaskets Available For Use With Resurfaced Cylinder Blocks{1124}
1992/10/05
New 9U6101 Lower Pilot Reamer Group Available{0670,1125}
1993/02/01
New Valve Cover Gasket Used {1107}
1994/01/17
Use 146-2597 Rocker Arm Bearing Installation Tool To Hold Push Rods In Place {1208}
1998/08/17

Caterpillar Parts SIS Catalog 3116 :

COVER GP-VALVE MECHANISM
4P-3572 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
4P-0600 COVER GP-VALVE MECHANISM
COVER GP-SOUND SUPPRESSION
7E-3643 COVER GP-SOUND SUPPRESSION
COVER GP-FRONT HOUSING
7W-9847 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
7L-0004 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
7E-0463 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
6I-1071 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
4P-0599 COVER GP-FRONT HOUSING
COVER GP-VALVE MECHANISM
6I-3336 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
7E-9915 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
9Y-9507 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
9Y-9507 COVER GP-VALVE MECHANISM
CRANKSHAFT GP
101-4559 CRANKSHAFT GP
CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
CYLINDER BLOCK GP
100-4948 CYLINDER BLOCK GP

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QUÉBEC, Quebec, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.